* [LARTC] Transparent shaper
@ 2002-11-06 8:47 Joachim Wickman
2002-11-06 17:00 ` Stef Coene
0 siblings, 1 reply; 2+ messages in thread
From: Joachim Wickman @ 2002-11-06 8:47 UTC (permalink / raw)
To: lartc
Hello,
Is it possible to make a shaper (with QoS) transparent?
No IPs to the shaper, only a bridge with 2 NICs ?
// Joachim
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [LARTC] Transparent shaper
2002-11-06 8:47 [LARTC] Transparent shaper Joachim Wickman
@ 2002-11-06 17:00 ` Stef Coene
0 siblings, 0 replies; 2+ messages in thread
From: Stef Coene @ 2002-11-06 17:00 UTC (permalink / raw)
To: lartc
On Wednesday 06 November 2002 09:47, Joachim Wickman wrote:
> Hello,
>
> Is it possible to make a shaper (with QoS) transparent?
>
> No IPs to the shaper, only a bridge with 2 NICs ?
Yes. But give 1 NIC an ip so at least you can log on to the box.
Stef
--
stef.coene@docum.org
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2002-11-06 17:00 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-11-06 8:47 [LARTC] Transparent shaper Joachim Wickman
2002-11-06 17:00 ` Stef Coene
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.