[LARTC] cbq init for one port on a subnet

* [LARTC] cbq init for one port on a subnet
@ 2003-02-04 19:17 Scott Black
  0 siblings, 0 replies; only message in thread
From: Scott Black @ 2003-02-04 19:17 UTC (permalink / raw)
  To: lartc

Hello,

We use cbq.init to limit bandwidth.  It works great on a per-user basis.
Now  I'd like to limit traffic from a netblock to the Internet on port 6699.

Network is 192.168.0.160  mask 255.255.255.224
eth0 is the gateway
eth1 connects the netblock in question

Is this the proper syntax;

DEVICE=eth0,10Mbit,1Mbit
RATE\x100Kbit
WEIGHT\x10Kbit
PRIO=5
RULEf99 192.168.0.160/27,

Thanks!

Scott

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

^ permalink raw reply	[flat|nested] only message in thread