Re: [LARTC] Test tool - traffic generator.

[Emmanuel Guiton <emmanuel@netlab.hut.fi>]

>
>
>What do you mean by "wants to resolve the remote address" ?
>
I mean that the only packets sent on the network are ARP packets like 
these ones for example:

02/21-16:27:07.393165 ARP who-has 10.0.0.25 tell 10.10.10.11

02/21-16:27:08.393168 ARP who-has 10.0.0.25 tell 10.10.10.11


10.10.10.25 is the fake address I used and 10.10.10.11 is the emitting 
station.

>
>I can send UDP packets to addresses which have no node listening
>with ttcp just fine.
>
>I can send UDP packets to a broadcast address with ttcp too.
>  
>
You make me dream. I hope I'm just misusing ttcp because I despair of 
finding the right soft.

>Can you post an example of you trying and whatever failure you see ?
>
>  
>
Sure:
I used the example from the README file.
./ttcp4 -t -s 10.0.0.25

On my second station I get the ARP packets above.
On the emitting station, ttcp quit after a while with these messages:

ttcp-t: connect: No route to host
Segmentation fault


Any clue?

             Emmanuel who is seeing the bright light of hope

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/