Re: [LARTC] BW using CBQ/tc for VPN Ipsec i/f?

[Srikanth <srikanth_w@naturesoft.net>]

[-- Attachment #1: Type: text/plain, Size: 1426 bytes --]




Stef Coene wrote:

>On Monday 07 April 2003 13:41, Srikanth wrote:
>  
>
>>How about, if i shall use tc / iproute2 ?
>>    
>>
>cbq.init uses tc  But it makes configuring tc more easy because you can use 
>simple config files.
>
>Stef
>  
>
It's OK., my question was about, if i use tc, shall i need to pass ipsec 
protocol / port number as arguments?
i mean, Is there any mechanism to recognize ipsec packets / VPN tunnels.

Srikanth.

>  
>
>>Srikanth.
>>
>>hare ram wrote:
>>    
>>
>>>if you are using the cbq.init script yes it works
>>>
>>>hare
>>>----- Original Message -----
>>>      
>>>
>>From: "Srikanth" <srikanth_w@naturesoft.net>
>>
>>    
>>
>>>To: <lartc@mailman.ds9a.nl>
>>>Sent: Monday, April 07, 2003 2:45 PM
>>>Subject: [LARTC] BW using CBQ/tc for VPN Ipsec i/f?
>>>
>>>      
>>>
>>>>Hi all,
>>>>
>>>>I want to allocate bandwidth for ipsec interface using CBQ/tc.
>>>>Suppose the conf. file is like this,
>>>>
>>>>DEVICE=ipsec0,10Mbit,1Mbit
>>>>RATE=128Kbit
>>>>WEIGHT=10Kbit
>>>>PRIO=5
>>>>RULE=192.128.1.0/24
>>>>
>>>>Does it work
>>>>or
>>>>What else options need to be taken care like ipsec packets/protocol/port
>>>># etc.?
>>>>C'd anybody suggest please?
>>>>
>>>>regds,
>>>>Srikanth.
>>>>
>>>>
>>>>_______________________________________________
>>>>LARTC mailing list / LARTC@mailman.ds9a.nl
>>>>http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>>>>        
>>>>
>
>  
>


[-- Attachment #2: Type: text/html, Size: 2551 bytes --]