Re: [LARTC] Script problem

["Alexandru Coseru" <alexcos@home.ro>]

it worked...  thanks..

I'm gonna test it later to see if it really works & shapes the traffic..


One more question though ...

    Can I add more than 3 (three) bands ?


Like:

tc qdisc add dev eth1 parent 10:1 handle 20:bfifo
tc qdisc add dev eth1 parent 10:2 handle 30:bfifo
tc qdisc add dev eth1 parent 10:3 handle 40:bfifo
tc qdisc add dev eth1 parent 10:4 handle 50:bfifo


of course , i get an error at the last line...  but can I do it in another
way ?


                                                Thanks

Alex
----- Original Message -----
From: "Stef Coene" <stef.coene@docum.org>
To: "Alexandru Coseru" <alexcos@home.ro>
Cc: <lartc@mailman.ds9a.nl>
Sent: Monday, May 05, 2003 10:08 PM
Subject: Re: [LARTC] Script problem


> On Monday 05 May 2003 20:42, Alexandru Coseru wrote:
> > Yes..  this is the error part:
> >
> >
> > [root@alexcos root]# tc qdisc del dev eth1 root
> > [root@alexcos root]# tc qdisc add dev eth1 root handle 10: prio
> > [root@alexcos root]# tc qdisc add dev eth1 parent 10:1 handle 20:est
1sec 8
> > sec bfifo
> > Unknown qdisc "1sec", hence option "8" is unparsable
> > [root@alexcos root]# tc qdisc add dev eth1 parent 10:1 handle 20:est 1
sec
> > 8 sec bfifo
> > Unknown qdisc "1", hence option "sec" is unparsable
> I don't know the syntac for the bfifo qdisc.  But what if you simple
remove
> some parameters :
> tc qdisc add dev eth1 parent 10:1 handle 20: bfifo
>
>
> Stef
>
> --
>
> stef.coene@docum.org
>  "Using Linux as bandwidth manager"
>      http://www.docum.org/
>      #lartc @ irc.oftc.net
>
>


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/