[LARTC] 4 Users no Bandwidth Borrowing

[LARTC] 4 Users no Bandwidth Borrowing

[Osgaldo Suanzes]

Hi,

    How can I assign 4 users  bandwidth, and not allow them to borrow
bandwidth to others when someone is not using it?

    As you see below I tried to assign each class the same ceil like its
rate,
    It didnt worked.  but Im not sure if  this is the way to go..... Maybe I
did something wrong any ideas?

#tc qdisc del dev eth1 root

#tc qdisc add dev eth1 root handle 1: htb

#tc class add dev eth1 parent 1: classid 1:1 htb rate 100kbps ceil 100kbps

#tc class add dev eth1 parent 1:1 classid 1:10 htb rate 15kbps ceil 15kbps
#tc class add dev eth1 parent 1:1 classid 1:11 htb rate 25kbps ceil 25kbps
#tc class add dev eth1 parent 1:1 classid 1:12 htb rate 10ps ceil 10ps
#tc class add dev eth1 parent 1:1 classid 1:13 htb rate 50kbps ceil 50kbps

#tc filter add dev eth1 protocol ip parent 1:1 prio 1 u32 match ip src
10.3.0.2 flowid 1:10
#tc filter add dev eth1 protocol ip parent 1:1 prio 1 u32 match ip src
10.3.0.3 flowid 1:11
#tc filter add dev eth1 protocol ip parent 1:1 prio 1 u32 match ip src
10.3.0.4 flowid 1:12
#tc filter add dev eth1 protocol ip parent 1:1 prio 1 u32 match ip src
10.3.0.5 flowid 1:13




        Regards Osgaldo.

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] 4 Users no Bandwidth Borrowing

[Stef Coene]

On Wednesday 21 May 2003 17:57, Osgaldo Suanzes wrote:
> Hi,
>
>     How can I assign 4 users  bandwidth, and not allow them to borrow
> bandwidth to others when someone is not using it?
>
>     As you see below I tried to assign each class the same ceil like its
> rate,
>     It didnt worked.  but Im not sure if  this is the way to go..... Maybe
> I did something wrong any ideas?
>
> #tc qdisc del dev eth1 root
>
> #tc qdisc add dev eth1 root handle 1: htb
>
> #tc class add dev eth1 parent 1: classid 1:1 htb rate 100kbps ceil 100kbps
>
> #tc class add dev eth1 parent 1:1 classid 1:10 htb rate 15kbps ceil 15kbps
> #tc class add dev eth1 parent 1:1 classid 1:11 htb rate 25kbps ceil 25kbps
> #tc class add dev eth1 parent 1:1 classid 1:12 htb rate 10ps ceil 10ps
What's "ps" ?  Shouldn't that be kbps ?

> #tc class add dev eth1 parent 1:1 classid 1:13 htb rate 50kbps ceil 50kbps
>
> #tc filter add dev eth1 protocol ip parent 1:1 prio 1 u32 match ip src
> 10.3.0.2 flowid 1:10
> #tc filter add dev eth1 protocol ip parent 1:1 prio 1 u32 match ip src
> 10.3.0.3 flowid 1:11
> #tc filter add dev eth1 protocol ip parent 1:1 prio 1 u32 match ip src
> 10.3.0.4 flowid 1:12
> #tc filter add dev eth1 protocol ip parent 1:1 prio 1 u32 match ip src
> 10.3.0.5 flowid 1:13
We need some more information.  Is this on a natting firewall?  And is eth1 
connected to that LAN or the internet?  And I suppose 10.3.0.2 is an internal 
ip-address?

Stef

-- 

stef.coene@docum.org
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/