[LARTC] tc usage

[LARTC] tc usage

[Alex Zeffertt]

Dear List,

I am a tc newbie, and I've been working through the LARTC HOWTO to try
to understand how qdiscs, classes, and filters fit together.

I was confused by the example in section 9.5.5.1 (see excerpt below).  I
thought that classes were could only be attached to qdiscs (classful
ones).  In the example, however, classes are being attached to other
classes.  Can anybody explain to me how this works?

Sorry if this is a silly question.

Thanks,

Alex

---- snip ----

9.5.5.1. Sample configuration

Functionally almost identical to the CBQ sample configuration above:

# tc qdisc add dev eth0 root handle 1: htb default 30

# tc class add dev eth0 parent 1: classid 1:1 htb rate 6mbit burst 15k

# tc class add dev eth0 parent 1:1 classid 1:10 htb rate 5mbit burst 15k
# tc class add dev eth0 parent 1:1 classid 1:20 htb rate 3mbit ceil 6mbit burst 15k
# tc class add dev eth0 parent 1:1 classid 1:30 htb rate 1kbit ceil 6mbit burst 15k

   The author then recommends SFQ for beneath these classes:
# tc qdisc add dev eth0 parent 1:10 handle 10: sfq perturb 10
# tc qdisc add dev eth0 parent 1:20 handle 20: sfq perturb 10
# tc qdisc add dev eth0 parent 1:30 handle 30: sfq perturb 10

   Add the filters which direct traffic to the right classes:
# U32="tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32"
# $U32 match ip dport 80 0xffff flowid 1:10
# $U32 match ip sport 25 0xffff flowid 1:20

--- /snip ----

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] tc usage

[Stef Coene]

On Tuesday 03 June 2003 14:45, Alex Zeffertt wrote:
> Dear List,
>
> I am a tc newbie, and I've been working through the LARTC HOWTO to try
> to understand how qdiscs, classes, and filters fit together.
>
> I was confused by the example in section 9.5.5.1 (see excerpt below).  I
> thought that classes were could only be attached to qdiscs (classful
> ones).  In the example, however, classes are being attached to other
> classes.  Can anybody explain to me how this works?
Like you said, you can add classes to classes :)
I have some more shaping documentation on www.docum.org if you are interested.

Stef

-- 

stef.coene@docum.org
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/