[LARTC] Unknown qdisc "htb", hence option "default" is unparsable

[LARTC] Unknown qdisc "htb", hence option "default" is unparsable

[rio]

Dear all,
I tried to re-compile iproute2 from
ftp://ftp.inr.ac.ru/ip-routing/iproute2-2.4.7-now-ss010824.tar.gz
But still htb is unknown ..

Regards,
Rio Martin.

--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

AW: [LARTC] Unknown qdisc "htb", hence option "default" is unparsable

[Martin Teufel]

you should use the patch 
http://luxik.cdi.cz/~devik/qos/htb/v3/htb3.6-020525.tgz from 
http://luxik.cdi.cz/~devik/qos/htb/

regards martin

-----Ursprüngliche Nachricht-----
Von: lartc-admin@mailman.ds9a.nl [mailto:lartc-admin@mailman.ds9a.nl] Im
Auftrag von rio@martin.mu
Gesendet: Donnerstag, 26. Juni 2003 08:25
An: lartc@mailman.ds9a.nl
Betreff: [LARTC] Unknown qdisc "htb", hence option "default" is unparsable


Dear all,
I tried to re-compile iproute2 from
ftp://ftp.inr.ac.ru/ip-routing/iproute2-2.4.7-now-ss010824.tar.gz
But still htb is unknown ..

Regards,
Rio Martin.

--------------------------------------------------------------------
mail2web - Check your email from the web at http://mail2web.com/ .


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/




_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] Unknown qdisc "htb", hence option "default" is

[K S Sreeram]

The official iproute2 package does not have the latest HTB code

You'll either have to get a patch or the pre-compiled static binaries
from:
http://luxik.cdi.cz/~devik/qos/htb/

See the 'Downloads' section

Regards

On Thu, 2003-06-26 at 11:55, rio@martin.mu wrote:
> Dear all,
> I tried to re-compile iproute2 from
> ftp://ftp.inr.ac.ru/ip-routing/iproute2-2.4.7-now-ss010824.tar.gz
> But still htb is unknown ..
> 
> Regards,
> Rio Martin.
> 
> --------------------------------------------------------------------
> mail2web - Check your email from the web at
> http://mail2web.com/ .
> 
> 
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
-- 
K S Sreeram
Director of Research
Tachyon Technologies Pvt. Ltd.


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

[LARTC] Unknown qdisc "htb", hence option "default" is unparsable

[Marcelo Araujo]

(i sent the same message from another email acount, that isn't
memberlist. sorry)

Hi Everyone..!!

i'm beginner in tc with htb, i'm use to limit public, and nat ip clients,
i'm to add to one of my server and get this error:

> tc qdisc add dev eth0 root handle 1: htb default 10
Unknown qdisc "htb", hence option "default" is unparsable

here is my server information:
Linux Server 2.4.20-30.9 #1 Wed Feb 4 20:44:26 EST 2004 i686 i686 i386
GNU/Linux

Module                  Size  Used by    Not tainted
cls_u32                 6300   0  (autoclean)
cls_fw                  3512   0  (autoclean)
sch_sfq                 4096   0  (autoclean)
sch_htb                22176   0
ipt_MARK                1368   2  (autoclean)
ip_nat_ftp              4112   0  (unused)
ip_conntrack_ftp        5296   1
ipt_state               1080   0  (unused)
ipt_limit               1560   0  (unused)
ipt_LOG                 4184   0  (unused)
iptable_nat            21752   2  [ip_nat_ftp]
iptable_mangle          2776   1
iptable_filter          2412   1
ip_conntrack           27304   3  [ip_nat_ftp ip_conntrack_ftp ipt_state
iptable_nat]
ip_tables              15096   9  [ipt_MARK ipt_state ipt_limit ipt_LOG
iptable_nat iptable_mangle iptable_filter]
8139too                18120   1
mii                     3976   0  [8139too]
3c59x                  30736   1
keybdev                 2976   0  (unused)
mousedev                5556   0  (unused)
hid                    22244   0  (unused)
input                   5856   0  [keybdev mousedev hid]
usb-uhci               26412   0  (unused)
usbcore                79040   1  [hid usb-uhci]
ext3                   70784   2
jbd                    51924   2  [ext3]

In my first atemp, the module "sch_htb" wwas not loaded, so i load "modprobe
sch_htb", and again, the same error. Next i downloaded the
"htb3.6-020525.tgz" from http://luxik.cdi.cz/~devik/qos/htb/ and try to
execute with "tc" from tar. It's work, (i think) i check with show and
trafic counter works.

This is "tc" in /sbin/
-rwxr-xr-x    1 root     root       114716 Nov  3  2003 tc
This is "tc" in htb3.6-020525.tgz
-rwxrwxr-x    1 root     root       101992 May 12  2002 tc

The "tc" from the tarball is small compare to the system, so my question is,
can i use the tc from the tarball without any know issue? may i update my
kernel? what version are sure to work?

I'm newbie in this, excuse me my english, i hope understand me. Thanks a
lot.

Marcelo Araujo
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] Unknown qdisc "htb", hence option "default" is unparsable

[gypsy]

Marcelo Araujo wrote:
> 
> 
> This is "tc" in /sbin/
> -rwxr-xr-x    1 root     root       114716 Nov  3  2003 tc
> This is "tc" in htb3.6-020525.tgz
> -rwxrwxr-x    1 root     root       101992 May 12  2002 tc
> 
> The "tc" from the tarball is small compare to the system, so my question is,
> can i use the tc from the tarball without any know issue? may i update my
> kernel? what version are sure to work?

The tc you got from the tarball has been stripped of the debug info.  It
is 100% functional and fine.

Unless you encounter problems, your kernel should be fine too.

gypsy
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] Unknown qdisc "htb", hence option "default" is unparsable

[Marcelo Araujo]

Thanks a lot to everybody..!!

it's work :)

(i think :-p)

See ya.

Marcelo


On Wed, 06 Oct 2004 19:40:25 -0700, gypsy <gypsy@iswest.com> wrote:
> Marcelo Araujo wrote:
> >
> >
> > This is "tc" in /sbin/
> > -rwxr-xr-x    1 root     root       114716 Nov  3  2003 tc
> > This is "tc" in htb3.6-020525.tgz
> > -rwxrwxr-x    1 root     root       101992 May 12  2002 tc
> >
> > The "tc" from the tarball is small compare to the system, so my question is,
> > can i use the tc from the tarball without any know issue? may i update my
> > kernel? what version are sure to work?
> 
> The tc you got from the tarball has been stripped of the debug info.  It
> is 100% functional and fine.
> 
> Unless you encounter problems, your kernel should be fine too.
> 
> gypsy
>
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/