[LARTC] imq + htb =~/kazaa/

[LARTC] imq + htb =~/kazaa/

[Esteban]

Someone posted once a script based on htb+imq to handle kazaa and web 
traffic..both directions, download and upload.
If someone still have it, could it post again?
i searched on posted mailing list but couldnt find it.
Thanks!

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] imq + htb =~/kazaa/

[GoMi .]

I have no idea what you are talking about, since i never saw that email. If 
you want to filter traffic, anaylize the paquet contents, searching for a 
string common on kazaa packets and http traffic packets, so you can mark 
then and hence redirect them to the correct queue. ¿Get what i say?

_________________________________________________________________
Charla con tus amigos en línea mediante MSN Messenger: 
http://messenger.yupimsn.com/

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] imq + htb =~/kazaa/

[???????? ?????]

In my shaper I run htb on a bridge. I shape with success the kazaa and 
winmx traffic. As about Kazaa you have to place filters for tcp port 
1214 and it will work fine.
 Best regards
  Stamatis
Esteban wrote:

>Someone posted once a script based on htb+imq to handle kazaa and web 
>traffic..both directions, download and upload.
>If someone still have it, could it post again?
>i searched on posted mailing list but couldnt find it.
>Thanks!
>
>_______________________________________________
>LARTC mailing list / LARTC@mailman.ds9a.nl
>http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
>  
>



_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] imq + htb =~/kazaa/

[Stef Coene]

On Thursday 03 July 2003 07:45, ???????? ????? wrote:
> In my shaper I run htb on a bridge. I shape with success the kazaa and
> winmx traffic. As about Kazaa you have to place filters for tcp port
> 1214 and it will work fine.
Or try the layer 7 filter patch for the kernel (but I think it's only released 
for the 2.5.xx kernels).  So you can filter on packet content and you can 
filter all kazaa traffic no mather the ports they are using.

Stef

-- 

stef.coene@docum.org
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/