* Re: [LARTC] overlimit in tc statistics
2003-07-04 11:18 [LARTC] overlimit in tc statistics Sergey Smirnov
@ 2003-07-07 10:31 ` Stef Coene
2003-07-07 13:31 ` Sergey Smirnov
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Stef Coene @ 2003-07-07 10:31 UTC (permalink / raw)
To: lartc
On Friday 04 July 2003 13:18, Sergey Smirnov wrote:
> There is overlimit in queueing disciplines statistics:
>
> # tc -s qdisc show dev eth1|grep overlimit
> Sent 2405317 bytes 17168 pkts (dropped 0, overlimits 0)
> Sent 145699 bytes 872 pkts (dropped 0, overlimits 0)
> Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
> Sent 25374 bytes 160 pkts (dropped 0, overlimits 0)
> Sent 842 bytes 12 pkts (dropped 0, overlimits 0)
> Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
> Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
> Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
> Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
> Sent 38061 bytes 73 pkts (dropped 0, overlimits 0)
> Sent 35727 bytes 90 pkts (dropped 0, overlimits 0)
> Sent 2651738 bytes 18380 pkts (dropped 0, overlimits 318)
>
> But traffic classes statistics without overlimits:
> # tc -s class show dev eth1|grep overlimit
> Sent 2373030 bytes 16963 pkts (dropped 0, overlimits 0)
> Sent 35727 bytes 90 pkts (dropped 0, overlimits 0)
> Sent 2616582 bytes 18159 pkts (dropped 0, overlimits 0)
> Sent 38061 bytes 73 pkts (dropped 0, overlimits 0)
> Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
> Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
> Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
> Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
> Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
> Sent 25374 bytes 160 pkts (dropped 0, overlimits 0)
> Sent 842 bytes 12 pkts (dropped 0, overlimits 0)
> Sent 143548 bytes 861 pkts (dropped 0, overlimits 0)
>
> I don't understand this.
> What does this mean?
We are maybe guru's, but this is not enough information. What's your setup,
used commands, network topology, what you want to do, tests you did, full
output of you tc commands, .........
Stef
--
stef.coene@docum.org
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [LARTC] overlimit in tc statistics
2003-07-04 11:18 [LARTC] overlimit in tc statistics Sergey Smirnov
2003-07-07 10:31 ` Stef Coene
@ 2003-07-07 13:31 ` Sergey Smirnov
2003-07-07 15:38 ` Stef Coene
2003-07-07 16:15 ` Sergey Smirnov
3 siblings, 0 replies; 5+ messages in thread
From: Sergey Smirnov @ 2003-07-07 13:31 UTC (permalink / raw)
To: lartc
Stef Coene wrote:
> On Friday 04 July 2003 13:18, Sergey Smirnov wrote:
>
>>There is overlimit in queueing disciplines statistics:
>>
>># tc -s qdisc show dev eth1|grep overlimit
>> Sent 2405317 bytes 17168 pkts (dropped 0, overlimits 0)
>> Sent 145699 bytes 872 pkts (dropped 0, overlimits 0)
>> Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
>> Sent 25374 bytes 160 pkts (dropped 0, overlimits 0)
>> Sent 842 bytes 12 pkts (dropped 0, overlimits 0)
>> Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
>> Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
>> Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
>> Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
>> Sent 38061 bytes 73 pkts (dropped 0, overlimits 0)
>> Sent 35727 bytes 90 pkts (dropped 0, overlimits 0)
>> Sent 2651738 bytes 18380 pkts (dropped 0, overlimits 318)
>>
>>But traffic classes statistics without overlimits:
>># tc -s class show dev eth1|grep overlimit
>> Sent 2373030 bytes 16963 pkts (dropped 0, overlimits 0)
>> Sent 35727 bytes 90 pkts (dropped 0, overlimits 0)
>> Sent 2616582 bytes 18159 pkts (dropped 0, overlimits 0)
>> Sent 38061 bytes 73 pkts (dropped 0, overlimits 0)
>> Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
>> Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
>> Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
>> Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
>> Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
>> Sent 25374 bytes 160 pkts (dropped 0, overlimits 0)
>> Sent 842 bytes 12 pkts (dropped 0, overlimits 0)
>> Sent 143548 bytes 861 pkts (dropped 0, overlimits 0)
>>
>>I don't understand this.
>>What does this mean?
>
> We are maybe guru's, but this is not enough information. What's your setup,
> used commands, network topology, what you want to do, tests you did, full
> output of you tc commands, .........
>
> Stef
>
O'k. I have Debian stable Linux router to Internet.
I want manage Internet traffic on it:
Increase priority and speed of some protocols and decrease for others.
I know that I can change this only for outgoing packets.
First question:
If I decrease priority and speed for local network interface
does this mean that priority and speed for Internet interface
for the same protocol also decreases?
For example:
eth0 local network
eth1 Internet
tc qdisc del dev eth0 root
tc qdisc add dev eth0 root handle 1 htb default 99
tc class add dev eth0 parent 1: classid 1:2 htb rate 256Mbit burst 15k
tc class add dev eth0 parent 1:2 classid 1:10 htb rate 64Kbit ceil
128Kbit burst 15k prio 4
tc qdisc add dev eth0 parent 1:10 handle 10 sfq perturb 10
tc filter add dev eth0 parent 1:0 protocol ip prio 100 u32 match ip
sport 80 0xffff match ip dst 192.168.1.0/24 classid 1:10
Does this means that incoming traffic on eth1 to port 80 will be in
64Kbit-128Kbit with prio 4?
--
Sergey Smirnov
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [LARTC] overlimit in tc statistics
2003-07-04 11:18 [LARTC] overlimit in tc statistics Sergey Smirnov
2003-07-07 10:31 ` Stef Coene
2003-07-07 13:31 ` Sergey Smirnov
@ 2003-07-07 15:38 ` Stef Coene
2003-07-07 16:15 ` Sergey Smirnov
3 siblings, 0 replies; 5+ messages in thread
From: Stef Coene @ 2003-07-07 15:38 UTC (permalink / raw)
To: lartc
> O'k. I have Debian stable Linux router to Internet.
kernel version?
> I want manage Internet traffic on it:
> Increase priority and speed of some protocols and decrease for others.
> I know that I can change this only for outgoing packets.
> First question:
> If I decrease priority and speed for local network interface
> does this mean that priority and speed for Internet interface
> for the same protocol also decreases?
> For example:
> eth0 local network
> eth1 Internet
>
> tc qdisc del dev eth0 root
> tc qdisc add dev eth0 root handle 1 htb default 99
You don't have a 1:99 class. It's best if you have a 1:99 class so all
packets not matched by any filters are placed in a class.
> tc class add dev eth0 parent 1: classid 1:2 htb rate 256Mbit burst 15k
Do you have a 256Mbit link? And 15k is way too low. Remove all burst
parameters so htb can calculate the minimum burst for you.
> tc class add dev eth0 parent 1:2 classid 1:10 htb rate 64Kbit ceil
> 128Kbit burst 15k prio 4
> tc qdisc add dev eth0 parent 1:10 handle 10 sfq perturb 10
> tc filter add dev eth0 parent 1:0 protocol ip prio 100 u32 match ip
> sport 80 0xffff match ip dst 192.168.1.0/24 classid 1:10
>
> Does this means that incoming traffic on eth1 to port 80 will be in
> 64Kbit-128Kbit with prio 4?
Yes.
Stef
--
stef.coene@docum.org
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [LARTC] overlimit in tc statistics
2003-07-04 11:18 [LARTC] overlimit in tc statistics Sergey Smirnov
` (2 preceding siblings ...)
2003-07-07 15:38 ` Stef Coene
@ 2003-07-07 16:15 ` Sergey Smirnov
3 siblings, 0 replies; 5+ messages in thread
From: Sergey Smirnov @ 2003-07-07 16:15 UTC (permalink / raw)
To: lartc
[-- Attachment #1: Type: text/plain, Size: 6056 bytes --]
Stef Coene wrote:
>> O'k. I have Debian stable Linux router to Internet.
>
>
> kernel version?
2.4.21
>
>
>> I want manage Internet traffic on it:
>> Increase priority and speed of some protocols and decrease for others.
>> I know that I can change this only for outgoing packets.
>> First question:
>> If I decrease priority and speed for local network interface
>> does this mean that priority and speed for Internet interface
>> for the same protocol also decreases?
>> For example:
>> eth0 local network
>> eth1 Internet
>>
>> tc qdisc del dev eth0 root
>> tc qdisc add dev eth0 root handle 1 htb default 99
>
>
> You don't have a 1:99 class. It's best if you have a 1:99 class so
all packets not matched by any filters are placed in a class.
Yes. I have 1:99 class. I didn't write all script.
>
>
>> tc class add dev eth0 parent 1: classid 1:2 htb rate 256Mbit burst 15k
>
>
> Do you have a 256Mbit link? And 15k is way too low. Remove all
burst parameters so htb can calculate the minimum burst for you.
It's mistake. Should be 256Kbit
>
>
>> tc class add dev eth0 parent 1:2 classid 1:10 htb rate 64Kbit ceil
>> 128Kbit burst 15k prio 4
>> tc qdisc add dev eth0 parent 1:10 handle 10 sfq perturb 10
>> tc filter add dev eth0 parent 1:0 protocol ip prio 100 u32 match ip
>> sport 80 0xffff match ip dst 192.168.1.0/24 classid 1:10
>>
>> Does this means that incoming traffic on eth1 to port 80 will be in
>> 64Kbit-128Kbit with prio 4?
>
>
> Yes.
Thanks.
Second question.
I play with htb.init-v0.8.4 from sf.net and QOS configurator from
docum.org.
I attached my htb script.
Then I get statistics:
# tc -s -d qdisc show dev eth0
qdisc sfq 80cf: limit 128p quantum 1514b flows 128/1024
Sent 1880603 bytes 3102 pkts (dropped 0, overlimits 0)
qdisc sfq 80ce: limit 128p quantum 1514b flows 128/1024
Sent 2184 bytes 30 pkts (dropped 0, overlimits 0)
qdisc sfq 80cd: limit 128p quantum 1514b flows 128/1024
Sent 16322 bytes 87 pkts (dropped 0, overlimits 0)
qdisc sfq 80cc: limit 128p quantum 1514b flows 128/1024
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
qdisc sfq 80cb: limit 128p quantum 1514b flows 128/1024
Sent 10208 bytes 175 pkts (dropped 0, overlimits 0)
qdisc sfq 80ca: limit 128p quantum 1514b flows 128/1024
Sent 361 bytes 5 pkts (dropped 0, overlimits 0)
qdisc sfq 80c9: limit 128p quantum 1514b flows 128/1024
Sent 1257 bytes 18 pkts (dropped 0, overlimits 0)
qdisc sfq 80c8: limit 128p quantum 1514b flows 128/1024
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
qdisc sfq 80c7: limit 128p quantum 1514b flows 128/1024
Sent 33893 bytes 94 pkts (dropped 0, overlimits 0)
qdisc sfq 80c6: limit 128p quantum 1514b flows 128/1024
Sent 588 bytes 7 pkts (dropped 0, overlimits 0)
qdisc htb 1: r2q 10 default 99 direct_packets_stat 0 ver 3.10
Sent 1945416 bytes 3518 pkts (dropped 0, overlimits 1291)
htb qdisc 1: has overlimits.
Ok. I want to know which class has overlimits
# tc -s -d class show dev eth0
class htb 1:99 parent 1:2 leaf 80cf: prio 6 quantum 1638 rate 128Kbit
ceil 256Kbit burst 1762b/8 mpu 0b cburst 1926b/8 mpu 0b level 0
Sent 1890707 bytes 3161 pkts (dropped 0, overlimits 0)
rate 193bps 1pps
lended: 2215 borrowed: 946 giants: 0
tokens: 82550 ctokens: 45375
class htb 1:10 parent 1:2 leaf 80c6: prio 3 quantum 3276 rate 256Kbit
ceil 10Mbit burst 1926b/8 mpu 0b cburst 14704b/8 mpu 0b level 0
Sent 588 bytes 7 pkts (dropped 0, overlimits 0)
lended: 7 borrowed: 0 giants: 0
tokens: 46575 ctokens: 9152
class htb 1:2 root rate 10Mbit ceil 10Mbit burst 14704b/8 mpu 0b cburst
14704b/8 mpu 0b level 7
Sent 1995212 bytes 3654 pkts (dropped 0, overlimits 0)
rate 232bps 1pps
lended: 970 borrowed: 0 giants: 0
tokens: 9122 ctokens: 9122
class htb 1:20 parent 1:2 leaf 80c7: prio 7 quantum 1000 rate 64Kbit
ceil 128Kbit burst 1680b/8 mpu 0b cburst 1762b/8 mpu 0b level 0
Sent 71129 bytes 126 pkts (dropped 0, overlimits 0)
rate 5bps
lended: 102 borrowed: 24 giants: 0
tokens: -88558 ctokens: -61071
class htb 1:30 parent 1:2 leaf 80c8: prio 4 quantum 1638 rate 128Kbit
ceil 256Kbit burst 1762b/8 mpu 0b cburst 1926b/8 mpu 0b level 0
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
lended: 0 borrowed: 0 giants: 0
tokens: 88149 ctokens: 48174
class htb 1:40 parent 1:2 leaf 80c9: prio 5 quantum 1000 rate 64Kbit
ceil 128Kbit burst 1680b/8 mpu 0b cburst 1762b/8 mpu 0b level 0
Sent 1257 bytes 18 pkts (dropped 0, overlimits 0)
lended: 18 borrowed: 0 giants: 0
tokens: 135497 ctokens: 75947
class htb 1:51 parent 1:2 leaf 80cd: prio 2 quantum 1000 rate 64Kbit
ceil 128Kbit burst 1680b/8 mpu 0b cburst 1762b/8 mpu 0b level 0
Sent 16396 bytes 88 pkts (dropped 0, overlimits 0)
rate 3bps
lended: 88 borrowed: 0 giants: 0
tokens: 160900 ctokens: 84550
class htb 1:41 parent 1:2 leaf 80ca: prio 5 quantum 1000 rate 64Kbit
ceil 128Kbit burst 1680b/8 mpu 0b cburst 1762b/8 mpu 0b level 0
Sent 361 bytes 5 pkts (dropped 0, overlimits 0)
lended: 5 borrowed: 0 giants: 0
tokens: 163300 ctokens: 85750
class htb 1:50 parent 1:2 leaf 80cc: prio 1 quantum 1638 rate 128Kbit
ceil 256Kbit burst 1762b/8 mpu 0b cburst 1926b/8 mpu 0b level 0
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
lended: 0 borrowed: 0 giants: 0
tokens: 88149 ctokens: 48174
class htb 1:42 parent 1:2 leaf 80cb: prio 5 quantum 1000 rate 64Kbit
ceil 128Kbit burst 1680b/8 mpu 0b cburst 1762b/8 mpu 0b level 0
Sent 12590 bytes 219 pkts (dropped 0, overlimits 0)
rate 32bps
lended: 219 borrowed: 0 giants: 0
tokens: 163300 ctokens: 85750
class htb 1:60 parent 1:2 leaf 80ce: prio 1 quantum 3276 rate 256Kbit
ceil 10Mbit burst 1926b/8 mpu 0b cburst 14704b/8 mpu 0b level 0
Sent 2184 bytes 30 pkts (dropped 0, overlimits 0)
rate 1bps
lended: 30 borrowed: 0 giants: 0
tokens: 41178 ctokens: 9020
Opps. All overlimits in classes is zero!
That I wrote in my first message.
It's strange for me.
I want to know what protocol had overlimit.
# tc -V
tc utility, iproute2-ss020116
>
> Stef
>
--
Sergey Smirnov
[-- Attachment #2: my_htb_init.sh --]
[-- Type: text/x-sh, Size: 5471 bytes --]
/qos/bin/tc qdisc del dev eth0 root
/qos/bin/tc qdisc add dev eth0 root handle 1: htb default 99
/qos/bin/tc class add dev eth0 parent 1: classid 1:2 htb rate 1280kbps ceil 1280kbps
# http
/qos/bin/tc class add dev eth0 parent 1:2 classid 1:10 htb rate 32kbps ceil 1280kbps prio 3
/qos/bin/tc qdisc add dev eth0 parent 1:10 sfq
# smtp
/qos/bin/tc class add dev eth0 parent 1:2 classid 1:20 htb rate 8kbps ceil 16kbps prio 7
/qos/bin/tc qdisc add dev eth0 parent 1:20 sfq
# ftp
/qos/bin/tc class add dev eth0 parent 1:2 classid 1:30 htb rate 16kbps ceil 32kbps prio 4
/qos/bin/tc qdisc add dev eth0 parent 1:30 sfq
# imap
/qos/bin/tc class add dev eth0 parent 1:2 classid 1:40 htb rate 8kbps ceil 16kbps prio 5
/qos/bin/tc qdisc add dev eth0 parent 1:40 sfq
# imaps
/qos/bin/tc class add dev eth0 parent 1:2 classid 1:41 htb rate 8kbps ceil 16kbps prio 5
/qos/bin/tc qdisc add dev eth0 parent 1:41 sfq
# pop3
/qos/bin/tc class add dev eth0 parent 1:2 classid 1:42 htb rate 8kbps ceil 16kbps prio 5
/qos/bin/tc qdisc add dev eth0 parent 1:42 sfq
# cherep
/qos/bin/tc class add dev eth0 parent 1:2 classid 1:50 htb rate 16kbps ceil 32kbps prio 1
/qos/bin/tc qdisc add dev eth0 parent 1:50 sfq
# gre
/qos/bin/tc class add dev eth0 parent 1:2 classid 1:51 htb rate 8kbps ceil 16kbps prio 2
/qos/bin/tc qdisc add dev eth0 parent 1:51 sfq
# ssh
/qos/bin/tc class add dev eth0 parent 1:2 classid 1:60 htb rate 32kbps ceil 1280kbps prio 1
/qos/bin/tc qdisc add dev eth0 parent 1:60 sfq
# default
/qos/bin/tc class add dev eth0 parent 1:2 classid 1:99 htb rate 16kbps ceil 32kbps prio 6
/qos/bin/tc qdisc add dev eth0 parent 1:99 sfq
# Filter name : smtp
/qos/bin/tc filter add dev eth0 parent 1: protocol ip u32 match ip dport 25 0xffff classid 1:20
# Filter name : ssh
/qos/bin/tc filter add dev eth0 parent 1: protocol ip u32 match ip dport 22 0xffff classid 1:60
# Filter name : cherep
/qos/bin/tc filter add dev eth0 parent 1: protocol ip u32 match ip src 195.161.152.82 classid 1:50
# Filter name : imap
/qos/bin/tc filter add dev eth0 parent 1: protocol ip u32 match ip dport 143 0xffff classid 1:40
# Filter name : http
/qos/bin/tc filter add dev eth0 parent 1: protocol ip u32 match ip dport 80 0xffff classid 1:10
# Filter name : pop3
/qos/bin/tc filter add dev eth0 parent 1: protocol ip u32 match ip dport 110 0xffff classid 1:42
# Filter name : ftp
/qos/bin/tc filter add dev eth0 parent 1: protocol ip u32 match ip dport 20 0xffff classid 1:30
# Filter name : imaps
/qos/bin/tc filter add dev eth0 parent 1: protocol ip u32 match ip dport 993 0xffff classid 1:41
# Filter name : gre
# type : fw
/qos/bin/tc filter add dev eth0 parent 1: protocol ip handle 6 fw classid 1:51
/qos/bin/tc qdisc del dev eth1 root
/qos/bin/tc qdisc add dev eth1 root handle 1: htb default 99
/qos/bin/tc class add dev eth1 parent 1: classid 1:2 htb rate 1280kbps ceil 1280kbps
# http
/qos/bin/tc class add dev eth1 parent 1:2 classid 1:10 htb rate 32kbps ceil 1280kbps prio 3
/qos/bin/tc qdisc add dev eth1 parent 1:10 sfq
# smtp
/qos/bin/tc class add dev eth1 parent 1:2 classid 1:20 htb rate 8kbps ceil 16kbps prio 7
/qos/bin/tc qdisc add dev eth1 parent 1:20 sfq
# ftp
/qos/bin/tc class add dev eth1 parent 1:2 classid 1:30 htb rate 16kbps ceil 32kbps prio 4
/qos/bin/tc qdisc add dev eth1 parent 1:30 sfq
# imap
/qos/bin/tc class add dev eth1 parent 1:2 classid 1:40 htb rate 8kbps ceil 16kbps prio 5
/qos/bin/tc qdisc add dev eth1 parent 1:40 sfq
# imaps
/qos/bin/tc class add dev eth1 parent 1:2 classid 1:41 htb rate 8kbps ceil 16kbps prio 5
/qos/bin/tc qdisc add dev eth1 parent 1:41 sfq
# pop3
/qos/bin/tc class add dev eth1 parent 1:2 classid 1:42 htb rate 8kbps ceil 16kbps prio 5
/qos/bin/tc qdisc add dev eth1 parent 1:42 sfq
# cherep
/qos/bin/tc class add dev eth1 parent 1:2 classid 1:50 htb rate 16kbps ceil 32kbps prio 1
/qos/bin/tc qdisc add dev eth1 parent 1:50 sfq
# ssh
/qos/bin/tc class add dev eth1 parent 1:2 classid 1:60 htb rate 32kbps ceil 32kbps prio 1
/qos/bin/tc qdisc add dev eth1 parent 1:60 sfq
# default
/qos/bin/tc class add dev eth1 parent 1:2 classid 1:99 htb rate 8kbps ceil 32kbps prio 6
/qos/bin/tc qdisc add dev eth1 parent 1:99 sfq
# gre
/qos/bin/tc class add dev eth1 parent 1:2 classid 1:51 htb rate 8kbps ceil 16kbps prio 2
/qos/bin/tc qdisc add dev eth1 parent 1:51 sfq
# Filter name : smtp
/qos/bin/tc filter add dev eth1 parent 1: protocol ip u32 match ip dport 25 0xffff classid 1:20
# Filter name : ssh
/qos/bin/tc filter add dev eth1 parent 1: protocol ip u32 match ip dport 22 0xffff classid 1:60
# Filter name : cherep
/qos/bin/tc filter add dev eth1 parent 1: protocol ip u32 match ip dst 195.161.152.82 classid 1:50
# Filter name : imap
/qos/bin/tc filter add dev eth1 parent 1: protocol ip u32 match ip dport 143 0xffff classid 1:40
# Filter name : http
/qos/bin/tc filter add dev eth1 parent 1: protocol ip u32 match ip dport 80 0xffff classid 1:10
# Filter name : pop3
/qos/bin/tc filter add dev eth1 parent 1: protocol ip u32 match ip dport 110 0xffff classid 1:42
# Filter name : ftp
/qos/bin/tc filter add dev eth1 parent 1: protocol ip u32 match ip dport 20 0xffff classid 1:30
# Filter name : gre
# type : fw
/qos/bin/tc filter add dev eth1 parent 1: protocol ip handle 6 fw classid 1:51
# Filter name : imaps
/qos/bin/tc filter add dev eth1 parent 1: protocol ip u32 match ip dport 993 0xffff classid 1:41
^ permalink raw reply [flat|nested] 5+ messages in thread