[LARTC] How to let one node superior?

[LARTC] How to let one node superior?

[Jack H. Qi]

Hello all,

This is a newbie question and it is very simple. In my local network of 10M bandwidth. I'd like to allow my PC to have a 9M bandwidth. While all the other PCs share the rest 1M bandwidth. Suppose my pc 192.168.3.2 gateway 192.168.3.1.

Then, how could I set it in my gateway linux box? I think I should use tbf. Maybe, I need a cbq, but how to do it? The tc does not surport ! 192.168.3.2.
Maybe I need to use mark. 

Anyone give me a line of tc command?

thank youÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿË\x01\x14™¨¥Šx%ŠË\x7f,\x04S\vùšŠYšŸ÷lõ¯ç–^[m§ÿÿ™¨¥™©ÿvÏZþy\x7f™¨¥™©ÿ–+-ŠwèþV«µÁÎY3ÿ†Ûiÿÿåj»\þŠà

Re: [LARTC] How to let one node superior?

[Stef Coene]

On Thursday 10 July 2003 10:57, Jack H. Qi wrote:
> Hello all,
>
> This is a newbie question and it is very simple. In my local network of 10M
> bandwidth. I'd like to allow my PC to have a 9M bandwidth. While all the
> other PCs share the rest 1M bandwidth. Suppose my pc 192.168.3.2 gateway
> 192.168.3.1.
>
> Then, how could I set it in my gateway linux box? I think I should use tbf.
> Maybe, I need a cbq, but how to do it? The tc does not surport !
> 192.168.3.2. Maybe I need to use mark.
If you have a linux router as gateway, you can use cbq or htb to create 2 
classes.  One for you with rate = 9mbit and one for the other users with rate 
= 1mbit.  You can do this on both interfaces so you can shape both directions 
(you can only shape outgoing packets with regular htb / cbq qdisc).

> Anyone give me a line of tc command?
http://www.docum.org/

Stef

-- 

stef.coene@docum.org
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/