* [LARTC] cbq_default
@ 2003-09-01 9:11 Raghuveer
2003-09-01 18:07 ` Stef Coene
2003-09-02 4:59 ` Raghuveer
0 siblings, 2 replies; 3+ messages in thread
From: Raghuveer @ 2003-09-01 9:11 UTC (permalink / raw)
To: lartc
Hi Martin,
After shaping certain ip's and services, I would like to place the rest
ip's and services as default i.e can utilize only remaining bandwidth. I
know in HTB default can be defined. Can I get an idea that how can I
proceed in case of CBQ. Few example may definately help.
Regards
-Raghu
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [LARTC] cbq_default
2003-09-01 9:11 [LARTC] cbq_default Raghuveer
@ 2003-09-01 18:07 ` Stef Coene
2003-09-02 4:59 ` Raghuveer
1 sibling, 0 replies; 3+ messages in thread
From: Stef Coene @ 2003-09-01 18:07 UTC (permalink / raw)
To: lartc
On Monday 01 September 2003 10:59, Raghuveer wrote:
> Hi Martin,
>
> After shaping certain ip's and services, I would like to place the rest
> ip's and services as default i.e can utilize only remaining bandwidth. I
> know in HTB default can be defined. Can I get an idea that how can I
> proceed in case of CBQ. Few example may definately help.
You can use the u32 filter and 0/0 for the src (or dst) parameter.
Stef
--
stef.coene@docum.org
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [LARTC] cbq_default
2003-09-01 9:11 [LARTC] cbq_default Raghuveer
2003-09-01 18:07 ` Stef Coene
@ 2003-09-02 4:59 ` Raghuveer
1 sibling, 0 replies; 3+ messages in thread
From: Raghuveer @ 2003-09-02 4:59 UTC (permalink / raw)
To: lartc
Stef Coene wrote:
>On Monday 01 September 2003 10:59, Raghuveer wrote:
>
>
>>Hi Martin,
>>
>>After shaping certain ip's and services, I would like to place the rest
>>ip's and services as default i.e can utilize only remaining bandwidth. I
>>know in HTB default can be defined. Can I get an idea that how can I
>>proceed in case of CBQ. Few example may definately help.
>>
>>
>You can use the u32 filter and 0/0 for the src (or dst) parameter.
>
>
fine Stef, this is doing...
Regards
-Raghu
>Stef
>
>
>
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2003-09-02 4:59 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-09-01 9:11 [LARTC] cbq_default Raghuveer
2003-09-01 18:07 ` Stef Coene
2003-09-02 4:59 ` Raghuveer
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.