All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Curtis V. Schleich" <cvslist@ccaonline.com>
To: lartc@vger.kernel.org
Subject: [LARTC] QOS problems switching from CBQ to HTB.
Date: Mon, 15 Sep 2003 17:14:24 +0000	[thread overview]
Message-ID: <marc-lartc-106364615002966@msgid-missing> (raw)

Hello all!  So as not to inundate the entire list with a huge email, I have
put together a web page that
explains my situation and problem in detail.  Here is a quick summary:

                                  Internet
                                     |
                                     |
                                     |
                           CCAonline Router (Cisco)
                                     |
                                     |
                                     |
                                   (eth0)
                            Master CCAonline AP
                           HTB Bandwidth control
                                  (wlan0)
                                     |
                                     |
                                     |
                            =========                           /  /  /  /|\  \  \  \
                          /  /  /  / | \  \  \  \
                         /  /  /  /  |  \  \  \  \
                    (Lots of Wireless Clients) |  \
                                               /   \
                                              /     \
                                            AP1     AP2
                                           /          \
                                          /            \
                                      ====        ===                                     /  /|\  \      /  /|\  \
                                    /  / | \  \    /  / | \  \
                                  Other Wireless  Other Wireless
                                      Clients         Clients
Up until a few weeks ago, we had been using kernel version 2.4.18 and
CBQ.init to control bandwidth. I set that up quite a long time ago, and only
vaguely understood bandwidth control when I did, but it seemed to work well
enough. A few weeks ago, the hard drive began to fail in our master AP. I
had been working on designing its replacement anyway, so I was able to make
it limp along until I got 'Son of Master AP' up and running. The problem we
have now is that QOS is pretty crappy. I've read the LARTC HOWTO, and pretty
much the entire docum.org site. I feel like I have a relatively good handle
on the subject matter, but I'm not able to achieve good QOS. I'm mainly
looking for advice and input on how best to fairly share the available
bandwidth among the subscribers to our service. Ultimately we will want a
higher priority level for business clients, but that can wait until the
basics are under control. All details are available from
http://wireless.ccaonline.com/lartcThanks, everyone!  This is a great
list!Curtis V. Schleich,CCA and CCAonline,cvslist (at) ccaonline (dot) com

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

             reply	other threads:[~2003-09-15 17:14 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-09-15 17:14 Curtis V. Schleich [this message]
2003-09-15 18:22 ` [LARTC] QOS problems switching from CBQ to HTB Curtis V. Schleich
2003-09-15 20:18 ` Stef Coene
2003-09-15 21:00 ` Curtis V. Schleich
2003-09-15 21:49 ` Steve Wright
2003-09-15 22:00 ` Curtis V. Schleich
2003-09-16 18:38 ` Stef Coene

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=marc-lartc-106364615002966@msgid-missing \
    --to=cvslist@ccaonline.com \
    --cc=lartc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.