* [LARTC] htb errors, wrong patch?
@ 2003-10-04 0:52 Alex
2003-10-04 9:41 ` Stef Coene
2003-10-04 15:52 ` Alex
0 siblings, 2 replies; 3+ messages in thread
From: Alex @ 2003-10-04 0:52 UTC (permalink / raw)
To: lartc
I downloaded iproute2-2.4.7-now-ss010824.tar.gz and I did patched tc with
the htb3.6_tc.diff from htb3.6-020525.tgz and when I try to use a htb script
I get just errors. I did not patch the kernel, since I use kernel 2.4.21 and
I saw on - HTB Homepage that I need to patch it only if I run version 2.4.20
or earlier. Do also need the kernel patch ? Or maybe is something else
wrong?
RTNETLINK answers: No such file or directory
Deleted old root disk on eth0
Unknown filter "flowid", hence option "1:10" is unparsable
Unknown filter "flowid", hence option "1:2" is unparsable
RTNETLINK answers: Invalid argument
RTNETLINK answers: Invalid argument
RTNETLINK answers: Invalid argument
RTNETLINK answers: Invalid argument
Thanks!
Alex
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [LARTC] htb errors, wrong patch?
2003-10-04 0:52 [LARTC] htb errors, wrong patch? Alex
@ 2003-10-04 9:41 ` Stef Coene
2003-10-04 15:52 ` Alex
1 sibling, 0 replies; 3+ messages in thread
From: Stef Coene @ 2003-10-04 9:41 UTC (permalink / raw)
To: lartc
On Saturday 04 October 2003 02:52, Alex wrote:
> I downloaded iproute2-2.4.7-now-ss010824.tar.gz and I did patched tc with
> the htb3.6_tc.diff from htb3.6-020525.tgz and when I try to use a htb
> script I get just errors. I did not patch the kernel, since I use kernel
> 2.4.21 and I saw on - HTB Homepage that I need to patch it only if I run
> version 2.4.20 or earlier. Do also need the kernel patch ? Or maybe is
> something else wrong?
>
> RTNETLINK answers: No such file or directory
> Deleted old root disk on eth0
> Unknown filter "flowid", hence option "1:10" is unparsable
> Unknown filter "flowid", hence option "1:2" is unparsable
> RTNETLINK answers: Invalid argument
> RTNETLINK answers: Invalid argument
> RTNETLINK answers: Invalid argument
> RTNETLINK answers: Invalid argument
Can you post us your commands and do you have the htb qdisc enabled in your
kernel config?
Stef
--
stef.coene@docum.org
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.openprojects.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [LARTC] htb errors, wrong patch?
2003-10-04 0:52 [LARTC] htb errors, wrong patch? Alex
2003-10-04 9:41 ` Stef Coene
@ 2003-10-04 15:52 ` Alex
1 sibling, 0 replies; 3+ messages in thread
From: Alex @ 2003-10-04 15:52 UTC (permalink / raw)
To: lartc
I have everything cbq/htb and all the QoS stuff compiled directly in the
kernel, not as a module. The script is at
http://retea.hostingcenter.ro/htb.txt since is about 46k and is too big to
post here.
Thanks.
Alex
----- Original Message -----
From: "Stef Coene" <stef.coene@docum.org>
To: "Alex" <alex@hostingcenter.ro>; "Lartc" <lartc@mailman.ds9a.nl>
Sent: Saturday, October 04, 2003 12:41 PM
Subject: Re: [LARTC] htb errors, wrong patch?
> On Saturday 04 October 2003 02:52, Alex wrote:
> > I downloaded iproute2-2.4.7-now-ss010824.tar.gz and I did patched tc
with
> > the htb3.6_tc.diff from htb3.6-020525.tgz and when I try to use a htb
> > script I get just errors. I did not patch the kernel, since I use kernel
> > 2.4.21 and I saw on - HTB Homepage that I need to patch it only if I run
> > version 2.4.20 or earlier. Do also need the kernel patch ? Or maybe is
> > something else wrong?
> >
> > RTNETLINK answers: No such file or directory
> > Deleted old root disk on eth0
> > Unknown filter "flowid", hence option "1:10" is unparsable
> > Unknown filter "flowid", hence option "1:2" is unparsable
> > RTNETLINK answers: Invalid argument
> > RTNETLINK answers: Invalid argument
> > RTNETLINK answers: Invalid argument
> > RTNETLINK answers: Invalid argument
> Can you post us your commands and do you have the htb qdisc enabled in
your
> kernel config?
>
> Stef
>
> --
> stef.coene@docum.org
> "Using Linux as bandwidth manager"
> http://www.docum.org/
> #lartc @ irc.openprojects.net
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2003-10-04 15:52 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-10-04 0:52 [LARTC] htb errors, wrong patch? Alex
2003-10-04 9:41 ` Stef Coene
2003-10-04 15:52 ` Alex
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.