[LARTC] trafic shaping with aliases

[LARTC] trafic shaping with aliases

[Aleksandar Simonovski]

Hi,
This is my scenario

   1.---------
		| 
   2.---------   
		| <-------> HUB <-----> ETH1 <--- SHAPER ---> ETH0 <-----> INTERNET
   3.---------
		|
   4.---------

1,2,3 and 4 are all different networks 
ETH1 has four aliases whic are gateways for 1,2,3 and 4
can some help me with using HTB or CBQ for limiting the four diferent networks

1. 128KBit
2. 64KBit
3. 512Kbit
4. 192KBit 

thaks,
Aleksandar

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] trafic shaping with aliases

[Nikolay Datchev]

Think about the four networks like networks, all the four are at the same
physical interface - eth1, and aliases doesn't matter. So, you put the
root class and qdisc at eth1, create four subclasses for each network,
attach qdiscs and create four filters, each filter for one network.

-- Nikolay Datchev

On Fri, 10 Oct 2003, Aleksandar Simonovski wrote:

> Hi,
> This is my scenario
>
>    1.---------
> 		|
>    2.---------
> 		| <-------> HUB <-----> ETH1 <--- SHAPER ---> ETH0 <-----> INTERNET
>    3.---------
> 		|
>    4.---------
>
> 1,2,3 and 4 are all different networks
> ETH1 has four aliases whic are gateways for 1,2,3 and 4
> can some help me with using HTB or CBQ for limiting the four diferent networks
>
> 1. 128KBit
> 2. 64KBit
> 3. 512Kbit
> 4. 192KBit
>
> thaks,
> Aleksandar
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/