* [LARTC] Missing parameter descriptions
@ 2003-10-19 14:46 Marko Buuri
2003-10-20 0:43 ` Damion de Soto
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Marko Buuri @ 2003-10-19 14:46 UTC (permalink / raw)
To: lartc
I've been looking for descriptions of qdisc parameter "estimator" and u32
parameter "police" (defined by POLICE_SPEC), but in vain. I hope someone on
this list can explain these.
Thank you!
Marko Buuri
marko at buuri dot name
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [LARTC] Missing parameter descriptions
2003-10-19 14:46 [LARTC] Missing parameter descriptions Marko Buuri
@ 2003-10-20 0:43 ` Damion de Soto
2003-10-20 7:53 ` Marko Buuri
2003-10-21 12:56 ` Marko Buuri
2 siblings, 0 replies; 4+ messages in thread
From: Damion de Soto @ 2003-10-20 0:43 UTC (permalink / raw)
To: lartc
Marko Buuri wrote:
> I've been looking for descriptions of qdisc parameter "estimator" and u32
> parameter "police" (defined by POLICE_SPEC), but in vain. I hope someone on
> this list can explain these.
Have you seen :
http://lartc.org/howto/lartc.adv-filter.policing.html
with examples for 'police'
http://lartc.org/howto/lartc.cookbook.synflood-protect.html
and
http://lartc.org/howto/lartc.cookbook.ultimate-tc.html
I'm not sure where examples are of 'estimator' usage.
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Damion de Soto - Software Engineer email: damion@snapgear.com
SnapGear --- ph: +61 7 3435 2809
| Custom Embedded Solutions fax: +61 7 3891 3630
| and Security Appliances web: http://www.snapgear.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
--- Free Embedded Linux Distro at http://www.snapgear.org ---
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [LARTC] Missing parameter descriptions
2003-10-19 14:46 [LARTC] Missing parameter descriptions Marko Buuri
2003-10-20 0:43 ` Damion de Soto
@ 2003-10-20 7:53 ` Marko Buuri
2003-10-21 12:56 ` Marko Buuri
2 siblings, 0 replies; 4+ messages in thread
From: Marko Buuri @ 2003-10-20 7:53 UTC (permalink / raw)
To: lartc
>Damion de Soto wrote:
>Marko Buuri wrote:
>> I've been looking for descriptions of qdisc parameter
>"estimator" and u32
>> parameter "police" (defined by POLICE_SPEC), but in vain. I
>hope someone on
>> this list can explain these.
>Have you seen :
>http://lartc.org/howto/lartc.adv-filter.policing.html
>with examples for 'police'
>http://lartc.org/howto/lartc.cookbook.synflood-protect.html
>and
>http://lartc.org/howto/lartc.cookbook.ultimate-tc.html
Thank you for replying!
I find that POLICE_SPEC (term from tc command syntax, not found in the
HOWTO) isn't very well or perhaps clearly documented. I figure the first
page you sent is trying to say is that the syntax is more or less:
POLICE_SPEC = police [buffer [buffer] | maxburst [maxburst]] [mtu [mtu]
| minburst [minburst]] [mpu [mpu]] [rate [rate]] (continue | drop | pass
| reclassify)
However, the examples you sent are using parameter "burst" not listed
above. A novice as myself can find learning Linux traffic control a bit
confusing with this kind of discrepancies between the HOWTO, the command
syntax and the man pages.
>I'm not sure where examples are of 'estimator' usage.
If someone else here knows, please do tell.
Marko
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [LARTC] Missing parameter descriptions
2003-10-19 14:46 [LARTC] Missing parameter descriptions Marko Buuri
2003-10-20 0:43 ` Damion de Soto
2003-10-20 7:53 ` Marko Buuri
@ 2003-10-21 12:56 ` Marko Buuri
2 siblings, 0 replies; 4+ messages in thread
From: Marko Buuri @ 2003-10-21 12:56 UTC (permalink / raw)
To: lartc
>Damion de Soto wrote:
>Marko Buuri wrote:
>> I've been looking for descriptions of qdisc parameter
>"estimator" and u32
>> parameter "police" (defined by POLICE_SPEC), but in vain. I
>hope someone on
>> this list can explain these.
>Have you seen :
>http://lartc.org/howto/lartc.adv-filter.policing.html
>with examples for 'police'
>http://lartc.org/howto/lartc.cookbook.synflood-protect.html
>and
>http://lartc.org/howto/lartc.cookbook.ultimate-tc.html
Thank you for replying!
I find that POLICE_SPEC (term from tc command syntax, not found in the
HOWTO) isn't very well or perhaps clearly documented. I figure the first
page you sent is trying to say is that the syntax is more or less:
POLICE_SPEC = police [buffer [buffer] | maxburst [maxburst]] [mtu [mtu] |
minburst [minburst]] [mpu [mpu]] [rate [rate]] (continue | drop | pass |
reclassify)
However, the examples you sent are using parameter "burst" not listed above.
A novice as myself can find learning Linux traffic control a bit confusing
with this kind of discrepancies between the HOWTO, the command syntax and
the man pages.
>I'm not sure where examples are of 'estimator' usage.
If someone else here knows, please do tell.
Marko
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2003-10-21 12:56 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-10-19 14:46 [LARTC] Missing parameter descriptions Marko Buuri
2003-10-20 0:43 ` Damion de Soto
2003-10-20 7:53 ` Marko Buuri
2003-10-21 12:56 ` Marko Buuri
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.