* [LARTC] kernel panic with using IMQ - why?
@ 2003-10-13 5:36 Павел Мальков
2003-10-13 8:20 ` Stef Coene
2003-10-21 4:10 ` Fw: " Walter D. Wyndroski
0 siblings, 2 replies; 3+ messages in thread
From: Павел Мальков @ 2003-10-13 5:36 UTC (permalink / raw)
To: lartc
Hi, All!
I have kernel panic with using IMQ on my linux router.
In archive of this mailing list i found reason of this truble:
i used PREROUTING -j IMQ and POSTROUTING -j IMQ in one time
but i don't understand why this configuration is broken?
I want to control all traffic on my external interface,
for example i want to lease 30kbit/sec (inbound+outbound,
without dividing) for encrypting channel between the host of my LAN
and some host of Internet.
Please, explain to me reasons of this behavior or send me links
to this explanation.
Sorry for my bad English
WBR Pavel Malkov
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [LARTC] kernel panic with using IMQ - why?
2003-10-13 5:36 [LARTC] kernel panic with using IMQ - why? Павел Мальков
@ 2003-10-13 8:20 ` Stef Coene
2003-10-21 4:10 ` Fw: " Walter D. Wyndroski
1 sibling, 0 replies; 3+ messages in thread
From: Stef Coene @ 2003-10-13 8:20 UTC (permalink / raw)
To: lartc
On Monday 13 October 2003 07:36, Павел Мальков wrote:
> Hi, All!
> I have kernel panic with using IMQ on my linux router.
> In archive of this mailing list i found reason of this truble:
> i used PREROUTING -j IMQ and POSTROUTING -j IMQ in one time
> but i don't understand why this configuration is broken?
> I want to control all traffic on my external interface,
> for example i want to lease 30kbit/sec (inbound+outbound,
> without dividing) for encrypting channel between the host of my LAN
> and some host of Internet.
> Please, explain to me reasons of this behavior or send me links
> to this explanation.
I thought this issue was solved in the latest imq versions, but I'm not sure.
Stef
--
stef.coene@docum.org
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.openprojects.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread* Fw: [LARTC] kernel panic with using IMQ - why?
2003-10-13 5:36 [LARTC] kernel panic with using IMQ - why? Павел Мальков
2003-10-13 8:20 ` Stef Coene
@ 2003-10-21 4:10 ` Walter D. Wyndroski
1 sibling, 0 replies; 3+ messages in thread
From: Walter D. Wyndroski @ 2003-10-21 4:10 UTC (permalink / raw)
To: lartc
I run into this problem as well. Has anyone found a reason why? If so please
post an answer or a link. Many, many thanks in advance on this issue.
Walt Wyndroski
----- Original Message -----
From: "Павел Мальков" <pmalkov@bmu.ru>
To: <LARTC@mailman.ds9a.nl>
Sent: Monday, October 13, 2003 1:36 AM
Subject: [LARTC] kernel panic with using IMQ - why?
> Hi, All!
> I have kernel panic with using IMQ on my linux router.
> In archive of this mailing list i found reason of this truble:
> i used PREROUTING -j IMQ and POSTROUTING -j IMQ in one time
> but i don't understand why this configuration is broken?
> I want to control all traffic on my external interface,
> for example i want to lease 30kbit/sec (inbound+outbound,
> without dividing) for encrypting channel between the host of my LAN
> and some host of Internet.
> Please, explain to me reasons of this behavior or send me links
> to this explanation.
>
> Sorry for my bad English
>
> WBR Pavel Malkov
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
>
****************************************************************************
******************
> * This message has been scanned by CityNET's email scanner for viruses and
dangerous content *
> * and is believed to be clean. CityNET is proud to use MailScanner. For
more information *
> * concerning MailScanner, visit http://www.mailscanner.info
*
>
****************************************************************************
******************
>
**********************************************************************************************
* This message has been scanned by CityNET's email scanner for viruses and dangerous content *
* and is believed to be clean. CityNET is proud to use MailScanner. For more information *
* concerning MailScanner, visit http://www.mailscanner.info *
**********************************************************************************************
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2003-10-21 4:10 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-10-13 5:36 [LARTC] kernel panic with using IMQ - why? Павел Мальков
2003-10-13 8:20 ` Stef Coene
2003-10-21 4:10 ` Fw: " Walter D. Wyndroski
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.