[LARTC] 2 adsl links (same P-t-P) on the same machine

[LARTC] 2 adsl links (same P-t-P) on the same machine

[Rodrigo Gruppelli]

Hi... I have 2 ADSL lines (ppp0 and ppp1) on the same machine, and at  first moment, I just want to make them both ping correctly from the internet.

I already setup 2 links on the same machine, following the item 4.2.1 (split access) of the LARTC-HOWTO. I guess it was one dial-up link and one ADSL.

But now, I have two ADSL lines, both from the same provider, and both lines use the same P-t-P peer. I guess this is why I can't make work this dual link stuff... What should I do?



ppp0      Link encap:Point-to-Point Protocol
          inet addr:200.163.173.xxx  P-t-P:200.180.128.228  Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:9178  Metric:1
          RX packets:1083 errors:0 dropped:0 overruns:0 frame:0
          TX packets:978 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:3
          RX bytes:287476 (280.7 KiB)  TX bytes:80139 (78.2 KiB)


 
ppp1      Link encap:Point-to-Point Protocol
          inet addr:200.163.187.xxx  P-t-P:200.180.128.228  Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:9178  Metric:1
          RX packets:14 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:3
          RX bytes:568 (568.0 b)  TX bytes:61 (61.0 b)



Thanks in advance
Rodrigo
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/