[LARTC] Relieving ISDN of web/ftp traffic via cable modem...

[LARTC] Relieving ISDN of web/ftp traffic via cable modem...

[Glen]

<PRE>Hi,

I have two identical NIC's installed in a Mandrake 7.1 system.  One interface 
is connected to ISDN and the other to a cable modem.  The ISDN connection 
serves web and mail.  

I would like to relieve my ISDN connection of all personal web/ftp traffic 
(from my browser and ftp client) by utilizing the bandwidth of the cable 
modem on the 2nd interface.  All web and mail traffic to the server on the 
1st interface needs to continue as before.

After I activate the cable NIC in Linuxconf, I can ping my server with 
another box using the cable address.  Leaving it in this state (with IPV4 
routing off) makes the mail server begin to &quot;hold&quot; mail for destinations on 
the cable network.  (uh-oh)

Next, I run &quot;dhcdcd -R -h ______  eth1&quot; which goes out and contacts the DHCP 
server and assigns an IP address to the interface.  After a few hours (with 
no other tweaking) all my outbound traffic begins to flow across the cable 
connection.  It appears that mail is no longer being accepted on the eth0 
interface.  Running netstat -r shows the cable route as the 1st default route 
before the eth0 default previously set.  This isn't exactly what I was after 
(-;

I've read dozens of FAQ's, but still don't know exactly how to tackle this 
problem.  The Linux Routing FAQ has wonderful explanations, but no sample 
scenario close enough to mine (for me to understand).

Can someone offer some guidance?

Thanks!



</PRE>

[LARTC] Relieving ISDN of web/ftp traffic via cable modem...

[bert]

<PRE>On Thu, Oct 12, 2000 at 05:11:45PM -0400, Glen Stewart wrote:

&gt;<i> I would like to relieve my ISDN connection of all personal web/ftp traffic 
</I>&gt;<i> (from my browser and ftp client) by utilizing the bandwidth of the cable 
</I>&gt;<i> modem on the 2nd interface.  All web and mail traffic to the server on the 
</I>&gt;<i> 1st interface needs to continue as before.
</I>
We've done somewhat the same thing here, works well.

&gt;<i> After I activate the cable NIC in Linuxconf, I can ping my server with 
</I>&gt;<i> another box using the cable address.  Leaving it in this state (with IPV4 
</I>&gt;<i> routing off) makes the mail server begin to &quot;hold&quot; mail for destinations on 
</I>&gt;<i> the cable network.  (uh-oh)
</I>
I think you need to draw a picture, and really understand what is happening.
Your problems so far seem to be IP Address related - for example, when you
activate the cable NIC, does it get an IP address? 

Investigate where routes are pointing, and understand what those routes
mean.

Your problems so far are too general for me to be of more assistance.

-- 
PowerDNS                     Versatile DNS Services  
Trilab                       The Technology People   
'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet


</PRE>