* [LARTC] kernel freeze after cbq startup
2001-02-08 18:06 [LARTC] kernel freeze after cbq startup
@ 2001-02-09 15:03 ` Adrian
2001-02-09 16:00 ` bert
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Adrian @ 2001-02-09 15:03 UTC (permalink / raw)
To: lartc
<PRE>On Thu, 8 Feb 2001, Marek [iso-8859-2] Gre¹ko wrote:
><i> Hello,
</I>><i>
</I>><i> I want to ask what am I doing wrong. A few seconds after running this scr</I>ipt
><i> my gateway freezes. I use the 2.4.1 kernel compiled on RH 7.0 system usin</I>g
><i> the kgcc (egcs-1.1.2) compiler.
</I>><i>
</I>
Hi. I have the same problem, some seconds after activating cbq, the server
hangs and I have to power off and boot... :(.
I'm using WRR queue (needs kernel source modification). I've tried the
simpler configuration I can think of, that is the following, but system
freezes too:
tc qdisc add dev eth0 root wrr dest ip 500 0 pf1=0 pf2=0
Someone knows how to avoid the kernel freezing? I'm using kernel 2.2.18 on
RedHat 6.2
Adrián
</PRE>
^ permalink raw reply [flat|nested] 6+ messages in thread* [LARTC] kernel freeze after cbq startup
2001-02-08 18:06 [LARTC] kernel freeze after cbq startup
2001-02-09 15:03 ` Adrian
@ 2001-02-09 16:00 ` bert
2001-02-09 19:54 `
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: bert @ 2001-02-09 16:00 UTC (permalink / raw)
To: lartc
<PRE>On Fri, Feb 09, 2001 at 04:03:08PM +0100, Adrian wrote:
><i> I'm using WRR queue (needs kernel source modification). I've tried the
</I>
This means that not too many people have tried or tested the patch for
correctness.
Regards,
bert
--
<A HREF="http://www.PowerDNS.com">http://www.PowerDNS.com</A> Versatile DNS Services
Trilab The Technology People
'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet
</PRE>
^ permalink raw reply [flat|nested] 6+ messages in thread* [LARTC] kernel freeze after cbq startup
2001-02-08 18:06 [LARTC] kernel freeze after cbq startup
2001-02-09 15:03 ` Adrian
2001-02-09 16:00 ` bert
@ 2001-02-09 19:54 `
2001-02-10 12:13 ` Adrian
2001-02-11 3:42 ` Christian
4 siblings, 0 replies; 6+ messages in thread
From: @ 2001-02-09 19:54 UTC (permalink / raw)
To: lartc
<PRE>Hi all,
I have solved my problem with kernel freeze. I was using flowid 20:0 instead
of 20:1. Also I have rewritten the script. But now, I have to look at it,
because it doesn't shape anything:)
If I will not find the bug I'll post it there.
><i> > I want to ask what am I doing wrong. A few seconds after running this
</I>><i> > script my gateway freezes. I use the 2.4.1 kernel compiled on RH 7.0
</I>><i> > system using the kgcc (egcs-1.1.2) compiler.
</I>><i>
</I>><i> Hi. I have the same problem, some seconds after activating cbq, the ser</I>ver
><i> hangs and I have to power off and boot... :(.
</I>
Thank you
Marek Gresko
</PRE>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [LARTC] kernel freeze after cbq startup
2001-02-08 18:06 [LARTC] kernel freeze after cbq startup
` (2 preceding siblings ...)
2001-02-09 19:54 `
@ 2001-02-10 12:13 ` Adrian
2001-02-11 3:42 ` Christian
4 siblings, 0 replies; 6+ messages in thread
From: Adrian @ 2001-02-10 12:13 UTC (permalink / raw)
To: lartc
<PRE>On Fri, 9 Feb 2001, Marek [iso-8859-2] Gre¹ko wrote:
><i> Hi all,
</I>><i>
</I>><i> I have solved my problem with kernel freeze. I was using flowid 20:0 inst</I>ead
><i> of 20:1. Also I have rewritten the script. But now, I have to look at it,</I>
><i> because it doesn't shape anything:)
</I>><i>
</I>><i> If I will not find the bug I'll post it there.
</I>><i>
</I>
I've solved too :). I wrote to the WRR programmer and he's fixed the
problem in the source code, now it runs perfect :). I think he'll update
the WRR distribution to a new version in short...
Now I have a problem with the filters :(. I'm going to post in a separate
thread... Tnx 4 all
Adrián
</PRE>
^ permalink raw reply [flat|nested] 6+ messages in thread* [LARTC] kernel freeze after cbq startup
2001-02-08 18:06 [LARTC] kernel freeze after cbq startup
` (3 preceding siblings ...)
2001-02-10 12:13 ` Adrian
@ 2001-02-11 3:42 ` Christian
4 siblings, 0 replies; 6+ messages in thread
From: Christian @ 2001-02-11 3:42 UTC (permalink / raw)
To: lartc
<PRE>Hi,
><i> I've solved too :). I wrote to the WRR programmer and he's fixed the
</I>><i> problem in the source code, now it runs perfect :). I think he'll </I>update
><i> the WRR distribution to a new version in short...
</I>
Yes, he has done that now ;-)
Christian (author of wrr)
</PRE>
^ permalink raw reply [flat|nested] 6+ messages in thread