* [LARTC] RE: How to measure jitter & packet loss?
@ 2001-03-25 7:30 raghu arni
0 siblings, 0 replies; only message in thread
From: raghu arni @ 2001-03-25 7:30 UTC (permalink / raw)
To: lartc
See http://dast.nlanr.net/Projects/Iperf/
hth,
A
>
>Inter-packet gaps if too big may cause real-time application to have
>jitters. But how do i measure the jitter if supposedly i send out a tcp/udp
>stream??
>
>Attached is an extract of tcpdump data.
>
>Any information on how to post-analyse tcpdump for jitter, packet loss is
>very very much appreciated.
>
>
>Regards.
>
>
>
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2001-03-25 7:30 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-03-25 7:30 [LARTC] RE: How to measure jitter & packet loss? raghu arni
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.