* [LARTC] network scaling @ 2001-07-09 23:24 Mark Donaldson 2001-07-09 23:51 ` Mike Fedyk 2001-07-10 14:27 ` Michael T. Babcock 0 siblings, 2 replies; 3+ messages in thread From: Mark Donaldson @ 2001-07-09 23:24 UTC (permalink / raw) To: lartc HI I'm trying to increase my bandwidth so that I can access all of my T1. My NICS are all Intel Server adapters. RedHat offers scaling but only to a maximum of 262K. Does anyone know how to increase the bandwidth by increasing the scaling factor? Does anyone know how to combine to Intel Server NICS to increase throughput? Thank you Mark _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/ ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [LARTC] network scaling 2001-07-09 23:24 [LARTC] network scaling Mark Donaldson @ 2001-07-09 23:51 ` Mike Fedyk 2001-07-10 14:27 ` Michael T. Babcock 1 sibling, 0 replies; 3+ messages in thread From: Mike Fedyk @ 2001-07-09 23:51 UTC (permalink / raw) To: lartc On Mon, Jul 09, 2001 at 11:24:21PM +0000, Mark Donaldson wrote: > HI > > I'm trying to increase my bandwidth so that I can access all of my T1. My > NICS are all Intel Server adapters. RedHat offers scaling but only to a > maximum of 262K. > > Does anyone know how to increase the bandwidth by increasing the scaling > factor? > > Does anyone know how to combine to Intel Server NICS to increase throughput? An old 10baseT could max out your T1 several times over. 262k sounds like the limit of eql, is that what you're using? You need to be much more specific. Mike _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/ ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [LARTC] network scaling 2001-07-09 23:24 [LARTC] network scaling Mark Donaldson 2001-07-09 23:51 ` Mike Fedyk @ 2001-07-10 14:27 ` Michael T. Babcock 1 sibling, 0 replies; 3+ messages in thread From: Michael T. Babcock @ 2001-07-10 14:27 UTC (permalink / raw) To: lartc > I'm trying to increase my bandwidth so that I can access all of my T1. My > NICS are all Intel Server adapters. RedHat offers scaling but only to a > maximum of 262K. 1) 262 kilobytes (KB) or kilobits (Kb)? Note: 262 kilobytes would equate to 2 megabits. A really cheap ethernet card will do at least 3 megabits per second ... 10 is the minimum rating, with 100 being more common now. Your ethernet card(s) is(are) not the problem. -- Michael T. Babcock CTO, FibreSpeed _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/ ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2001-07-10 14:27 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2001-07-09 23:24 [LARTC] network scaling Mark Donaldson 2001-07-09 23:51 ` Mike Fedyk 2001-07-10 14:27 ` Michael T. Babcock
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.