Re: PROBLEM : PCI hotplug crashes with 2.4.9

[Pierre JUHEN <pierre.juhen@wanadoo.fr>]

The offending command is "/sbin/modprobe ohci1394".

Thank you for your help.

I will dig around ieee1394 tomorrow.

Regards,

Pierre
_________________________________________

David Brownell a écrit :

> > I was a bit lazy, writing by memory : you are right the system says
> >
> > "pcimodules is scanning more than 00:00.0"
> >
> > but onluy this line and crashes. Under 2.4.6, it scans all the pci
> > adresses.
> 
> Then you should be able to try reproducing this by hand,
> without hotplug scripts at all.  Is it "pcimodules" that's making
> it crash?  Or is it the subsequent "modprobe" commands?
> Neither of those is supposed to be able to crash the kernel.
> 
> You should be able to track this down pretty easily.  Disable
> the /etc/hotplug/pci.rc script for a moment ("pci.rc-"), boot, then
> run it by hand like "sh -x pci.rc start".  That's pretty much the way
> it's done at boot time, except that by passing the "-x" you get
> some nice debug output, and will be able to see what user
> mode command caused the crash.
> 
> - Dave

_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
http://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel