Re: [Linux-ia64] kernel update (relative to v2.4.0-test8)

["H . J . Lu" <hjl@valinux.com>]

On Fri, Sep 08, 2000 at 11:51:50PM -0700, David Mosberger wrote:
> The latest IA-64 kernel diff is now available at:
> 
>     ftp://ftp.kernel.org/pub/linux/kernel/ports/ia64/
> 
> in file linux-2.4.0-test8-ia64-000908.diff.gz.  The most important
> changes since the previous version:
> 
> 
> The patch below is once again a rough approximation of what changed
> since the last update.  This kernel has been tested on the HP Ski
> simulator, Big Sur (UP and MP), and Lion (MP).
> 

I tried it on my UP Big Sur with BIOS Build 59 and B1 stepping CPU.
It didn't work. I got

Unexpected irq vector 0x0 on CPU 0!

as soon as it booted. I am enclosing my .config here. BTW, the kernel
from the 0828 Turbo Linux booted fine. I am enclosing the boot message
here also. Any ideas?

Thanks.


H.J.
---
Linux version 2.4.0test7-000823-42 (root@borg) (gcc version 2.9-ia64-000216-final) #1 Sat Aug 26 16:31:32 PDT 2000
EFI v0.99 by INTEL: SALsystab=0x3ff25340 ACPI=0x3ffd9160 MPS=0x3ffd0000 SMBIOS=0xf0010
efi_map_pal_code: mapping PAL code [0x3ff40000-0x3ff7b000) into [0xe00000003fc00000-0xe000000040000000)
SAL v2.112: ia32bios´sent, oem=, product=SAL     
sal[0] - entry: pal_proc=0x3ff48010, sal_proc=0x3fe54730
SAL: Platform features BusLock 
processor implements 51 virtual and 44 physical address bits
ACPI: Intel    RSDT   0.0
Acpi cfg:bind to Boot time Acpi OSD
Acpi cfg:acpi initialize pass
Acpi cfg:acpi load firmware tables pass
Acpi cfg:acpi load namespace pass
      CPU 0 (0000:0000): Available.
IOSAPIC Version 2.1: address 0xfec00000 IRQs 0x0 - 0x3f
Acpi cfg:get pci vectors
Acpi cfg:_STA not found: pci bus 0 exist
Acpi cfg:_STA not found: pci bus 1 exist
Acpi cfg:_STA not found: pci bus 2 exist
Acpi cfg:_STA not found: pci bus 3 exist
      1 CPUs available, 1 CPUs total
ACPI:         -0550: <7>ACPI: *** Success: Entire namespace and objects deleted
Acpi cfg:acpi terminate pass
Acpi cfg:bind to Run time Acpi OSD
ia64_mca_init : begin
ia64_mca_init : registered mca rendezvous spinloop and wakeup mech.
ia64_mca_init : correctable mca vector setup done
ia64_mca_init : registered os mca handler with SAL
ia64_mca_init : os init handler at 5414b0
ia64_mca_init : registered os init handler with SAL
ia64_mca_init : platform-specific mca handling setup done
Mca related initialization done
On node 0 totalpages: 64672
zone(0): 64672 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Placing software IO TLB between 0xe000000000100000 - 0xe000000000300000
Kernel command line: root=/dev/sda2 init=/bin/bash 
fpswa interface at 3f197010
timer: CPU 0 base freq\x133.344MHz, ITC ratio\x10/2, ITC freqf6.722MHz
Console: colour VGA+ 80x25
Unexpected irq vector 0x0 on CPU 0!
Calibrating delay loop... 545.26 BogoMIPS
Memory: 1017312k/1034752k available (4064k code, 16368k reserved, 1382k data, 320k init)
Initialized perfmon vector to 40
Dentry-cache hash table entries: 65536 (order: 6, 1048576 bytes)
Buffer-cache hash table entries: 65536 (order: 5, 524288 bytes)
Page-cache hash table entries: 65536 (order: 5, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 1048576 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
PCI->APIC IRQ transform: (B0,I1,P0) -> 23
PCI->APIC IRQ transform: (B0,I3,P3) -> 2f
PCI->APIC IRQ transform: (B0,I3,P1) -> 2e
PCI->APIC IRQ transform: (B0,I4,P0) -> 2d
PCI->APIC IRQ transform: (B0,I5,P0) -> 2c
PCI->APIC IRQ transform: (B1,I1,P0) -> 17
PCI->APIC IRQ transform: (B1,I15,P0) -> 38
PCI->APIC IRQ transform: (B2,I0,P0) -> 1b
PCI->APIC IRQ transform: (B2,I15,P0) -> 39
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 16384 buckets, 256Kbytes
TCP: Hash tables configured (established 131072 bind 65536)
Initializing RT netlink socket
PAL Information Facility v0.3
Starting kswapd v1.7
pty: 256 Unix98 ptys configured
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: registered device at major 7
loop: enabling 8 loop devices
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 19
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide1: BM-DMA at 0x1098-0x109f, BIOS settings: hdc:pio, hdd:pio
hdc: LTN483, ATAPI CDROM drive
hdd: LS-120 F200 08 UHD Floppy, ATAPI FLOPPY drive
ide1 at 0x170-0x177,0x376 on irq 65
hdc: ATAPI 48X CD-ROM drive, 120kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.11
hdd: 123264kB, 963/8/32 CHS, 533 kBps, 512 sector size, 720 rpm
md driver 0.90.0 MAX_MD_DEVS%6, MAX_REAL\x12
linear personality registered
raid0 personality registered
raid1 personality registered
raid5 personality registered
raid5: measuring checksumming speed
   8regs     :   712.448 MB/sec
   32regs    :  1149.632 MB/sec
using fastest function: 32regs (1149.632 MB/sec)
md.c: sizeof(mdp_super_t) = 4096
LVM version 0.8final  by Heinz Mauelshagen  (15/02/2000)
lvm -- Driver successfully initialized
qla1280: detect() found an HBA
qla1280: VID\x1077 DID\x1280 SSVID\x1077 SSDID=6
scsi(0): Determining if RISC is loaded...
scsi(0): Verifying chip...
scsi(0): Setup chip...
scsi(0): Configure NVRAM parameters...
scsi(0): Resetting SCSI BUS (0)
scsi(0): Resetting SCSI BUS (1)
scsi0 : QLogic QLA1280  PCI to SCSI Host Adapter: bus 1 device 1 irq 23
       Firmware version:  8.13.08, Driver version 3.16 Beta
----
#
# Automatically generated make config: don't edit
#

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# General setup
#
CONFIG_IA64=y
CONFIG_SWIOTLB=y
# CONFIG_ISA is not set
# CONFIG_SBUS is not set
# CONFIG_IA64_GENERIC is not set
CONFIG_IA64_DIG=y
# CONFIG_IA64_HP_SIM is not set
# CONFIG_IA64_SGI_SN1_SIM is not set
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
CONFIG_ITANIUM=y
CONFIG_IA64_BRL_EMU=y
# CONFIG_ITANIUM_ASTEP_SPECIFIC is not set
CONFIG_ITANIUM_BSTEP_SPECIFIC=y
# CONFIG_ITANIUM_B0_SPECIFIC is not set
# CONFIG_IA64_HAVE_IRQREDIR is not set
# CONFIG_ITANIUM_PTCG is not set
# CONFIG_IA64_SOFTSDV_HACKS is not set
# CONFIG_IA64_AZUSA_HACKS is not set
CONFIG_IA64_MCA=y
CONFIG_SKB_BELOW_4GB=y
CONFIG_ACPI_KERNEL_CONFIG=y
CONFIG_PM=y
CONFIG_ACPI=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_KCORE_ELF=y
# CONFIG_SMP is not set
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
CONFIG_NET=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_PCI=y
CONFIG_PCI_NAMES=y
CONFIG_HOTPLUG=y

#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_NETLINK=y
# CONFIG_RTNETLINK is not set
CONFIG_NETLINK_DEV=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_FILTER=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_INET_ECN is not set
CONFIG_SYN_COOKIES=y

#
#   IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_COMPAT_IPFWADM=m
CONFIG_IP_NF_NAT_NEEDED=y
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set

#
#  
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_LVM=y
CONFIG_LVM_PROC_FS=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZEÅ92
CONFIG_BLK_DEV_INITRD=y

#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set

#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y

#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set
# CONFIG_BLK_DEV_IDEDISK_IBM is not set
# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set
# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set
# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set
# CONFIG_BLK_DEV_IDEDISK_WD is not set
# CONFIG_BLK_DEV_COMMERIAL is not set
# CONFIG_BLK_DEV_TIVO is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
# CONFIG_BLK_DEV_IDESCSI is not set

#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_AEC62XX_TUNING is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD7409 is not set
# CONFIG_AMD7409_OVERRIDE is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_HPT34X_AUTODMA is not set
# CONFIG_BLK_DEV_HPT366 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_PIIX_TUNING is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX is not set
# CONFIG_PDC202XX_BURST is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_IDEDMA_IVB is not set
# CONFIG_DMA_NONPCI is not set
CONFIG_BLK_DEV_IDE_MODES=y

#
# SCSI support
#
CONFIG_SCSI=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS@
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_SR_EXTRA_DEVS=2
CONFIG_CHR_DEV_SG=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_DEBUG_QUEUES=y
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
CONFIG_SCSI_AIC7XXX=y
# CONFIG_AIC7XXX_TCQ_ON_BY_DEFAULT is not set
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
# CONFIG_AIC7XXX_PROC_STATS is not set
CONFIG_AIC7XXX_RESET_DELAY=5
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
CONFIG_SCSI_MEGARAID=y
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_DEBUG is not set

#
# Network device support
#
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
# CONFIG_NET_SB1000 is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
# CONFIG_DE4X5 is not set
CONFIG_TULIP=y
# CONFIG_DGRS is not set
# CONFIG_DM9102 is not set
CONFIG_EEPRO100=y
# CONFIG_EEPRO100_PM is not set
# CONFIG_LNE390 is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not set
# CONFIG_RTL8129 is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_ES3210 is not set
# CONFIG_EPIC100 is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_YELLOWFIN is not set
CONFIG_ACENIC=y
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_SK98LIN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Input core support
#
# CONFIG_INPUT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT%6

#
# I2C support
#
# CONFIG_I2C is not set

#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_PC110_PAD is not set

#
# Joysticks
#
# CONFIG_JOYSTICK is not set

#
# Input core support is needed for joysticks
#
# CONFIG_QIC02_TAPE is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
CONFIG_EFI_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_I810=y
CONFIG_AGP_VIA=y
CONFIG_AGP_AMD=y
CONFIG_AGP_SIS=y
CONFIG_AGP_ALI=y
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_MGA is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
CONFIG_VFAT_FS=y
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_RAMFS is not set
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_MINIX_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
CONFIG_ROMFS_FS=y
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_SYSV_FS_WRITE is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set

#
# Network File Systems
#
# CONFIG_CODA_FS is not set
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_MOUNT_SUBDIR is not set
# CONFIG_NCPFS_NDS_DOMAINS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_UTF8 is not set

#
# Console drivers
#
CONFIG_VGA_CONSOLE=y

#
# Frame-buffer support
#
# CONFIG_FB is not set

#
# Sound
#
CONFIG_SOUND=y
CONFIG_SOUND_CMPCI=y
CONFIG_SOUND_CMPCI_SPDIFLOOP=y
CONFIG_SOUND_CMPCI_4CH=y
CONFIG_SOUND_CMPCI_REAR=y
CONFIG_SOUND_EMU10K1=y
# CONFIG_SOUND_FUSION is not set
CONFIG_SOUND_ES1370=y
CONFIG_SOUND_ES1371=y
CONFIG_SOUND_ESSSOLO1=y
CONFIG_SOUND_MAESTRO=y
CONFIG_SOUND_SONICVIBES=y
CONFIG_SOUND_TRIDENT=y
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_TVMIXER is not set

#
# USB support
#
CONFIG_USB=y
CONFIG_USB_DEBUG=y

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set

#
# USB Controllers
#
CONFIG_USB_UHCI_ALT=y
# CONFIG_USB_OHCI is not set

#
# USB Devices
#
CONFIG_USB_PRINTER=y
CONFIG_USB_SCANNER=y
CONFIG_USB_MICROTEK=y
CONFIG_USB_AUDIO=y
CONFIG_USB_ACM=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_VISOR=y
CONFIG_USB_SERIAL_WHITEHEAT=y
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_KEYSPAN_PDA=y
CONFIG_USB_SERIAL_KEYSPAN=y
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
CONFIG_USB_SERIAL_OMNINET=y
CONFIG_USB_SERIAL_DEBUG=y
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_OV511 is not set
CONFIG_USB_DC2XX=y
CONFIG_USB_MDC800=y
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_USS720 is not set
CONFIG_USB_DABUSB=y
CONFIG_USB_PLUSB=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RIO500=y
# CONFIG_USB_DSBR is not set
CONFIG_USB_BLUETOOTH=y

#
# USB Human Interface Devices (HID)
#

#
#   Input core support is needed for USB HID
#

#
# Kernel hacking
#
CONFIG_IA32_SUPPORT=y
CONFIG_MATHEMU=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_IA64_EARLY_PRINTK=y
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
CONFIG_IA64_PRINT_HAZARDS=y
# CONFIG_IA64_NEW_UNWIND is not set