All of lore.kernel.org
 help / color / mirror / Atom feed
* [Linux-ia64] Problem booting SuSE SLES 8 beta (kernel 2.4.9) on Itanium 2 box
@ 2003-01-16  0:37 Jose Rodriguez Ruibal
  2003-01-16  1:26 ` Grant Grundler
                   ` (5 more replies)
  0 siblings, 6 replies; 7+ messages in thread
From: Jose Rodriguez Ruibal @ 2003-01-16  0:37 UTC (permalink / raw)
  To: linux-ia64

Hi,

I'm testing SuSE SLES 8 on a Itanium 2 box, and the installation goes more
or less OK. The problem is that when I try to boot once installed, the boot
process stops while loading the mptable module. Here is the full log of the
boot:

*****************************************************************************
Full log of the boot process.
Contact Jose Rodriguez Ruibal <jose.rodriguez.ruibal@fr.ibm.com> for
feedback
*****************************************************************************

EFI version 1.10 [14.60] Build flags: EFI64 Running on Intel(R) Itanium
Processor

BIOS Version  0.19
EFI version 1.10 [14.60] Built Thu Dec 19 15:41:47 2002 by IBM

EFI Boot Manager ver 1.10 [14.60]

Loading device drivers

Loading.: Auxiliary Floating Point Driver
Load of Auxiliary Floating Point Driver failed: Unsupported


EFI Boot Manager ver 1.10 [14.60]

Please select a boot option

    SuSE SLES
    EFI Shell [Built-in]
    Acpi(PNP0A03,0)/Pci(5|1)/Ata(Primary,Master)
    MemMap(0:FF000000-FFFFFFFF)
    MemMap(0:FF800200-FFBFFFFF)
    Acpi(PNP0A03,1)/Pci(4|0)/Mac(0002551F0113)
    Acpi(PNP0A03,1)/Pci(4|1)/Mac(0002559F0113)
    Flash Update
    Configuration/Setup
    Diagnostic
    Boot option maintenance menu




    Use \x18 and \x19 to change option(s). Use Enter to select an option
Loading.: SuSE SLES
Starting: SuSE SLES

ELILO boot: Uncompressing Linux... done
Loading initrd \initrd...done
Linux version 2.4.19 (root@ITANIUM2.suse.de) (gcc version 3.2) #1 Thu Dec
12 19:
33:22 UTC 2002
Total HugeTLB_Page memory pages requested  0x20
EFI v1.10 by INTEL: SALsystab=0x1efc2000 ACPI 2.0=0xf1100 SMBIOS=0xf1000
CPU 0: mapping PAL code [0x1f000000-0x1f100000) into
[0xe00000001f000000-0xe0000
00020000000)
Initial ramdisk at: 0xe00000001ce6d000 (1138688 bytes)
SAL v3.00: oem= IBM                            , product= XXX X XXX

SAL: entry: pal_proc=0x1f008010, sal_proc=0x1f703970
SAL: Platform features
booting generic kernel on platform dig
CPU 0: 61 virtual and 50 physical address bits
ACPI: RSDP (v002 IBM                        ) @ 0x00000000000f1100
ACPI: XSDT (v001 IBM    SERMOW   00000.00001) @ 0x000000001efe0040
ACPI: FADT (v003 IBM    SERMOW   00000.00003) @ 0x000000001efe0120
ACPI: DBGP (v001 IBM    SERMOW   00000.00001) @ 0x000000001efe0220
ACPI: MADT (v001 IBM    SERMOW   00000.00001) @ 0x000000001efe8140
ACPI: SRAT (v001 IBM    SERMOW   00000.00001) @ 0x000000001efe82f0
ACPI: OEM0 (v001 IBM    RIOTABLE 00000.00003) @ 0x000000001efe8400
ACPI: Local APIC address 0xc0000000fee00000
ACPI: LSAPIC (acpi_id[0x00] lsapic_id[0x00] lsapic_eid[0x00] enabled)
CPU 0 (0x0000) enabled
ACPI: LSAPIC (acpi_id[0x01] lsapic_id[0x00] lsapic_eid[0x00] disabled)
ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1)
ACPI: LSAPIC (acpi_id[0x02] lsapic_id[0x00] lsapic_eid[0x00] disabled)
ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1)
ACPI: LSAPIC (acpi_id[0x03] lsapic_id[0x00] lsapic_eid[0x00] disabled)
ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1)
ACPI: LSAPIC (acpi_id[0x04] lsapic_id[0x00] lsapic_eid[0x00] disabled)
ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1)
ACPI: LSAPIC (acpi_id[0x05] lsapic_id[0x00] lsapic_eid[0x00] disabled)
ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1)
ACPI: LSAPIC (acpi_id[0x06] lsapic_id[0x00] lsapic_eid[0x00] disabled)
ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1)
ACPI: LSAPIC (acpi_id[0x07] lsapic_id[0x00] lsapic_eid[0x00] disabled)
ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1)
ACPI: LSAPIC (acpi_id[0x08] lsapic_id[0x00] lsapic_eid[0x00] disabled)
ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1)
ACPI: LSAPIC (acpi_id[0x09] lsapic_id[0x00] lsapic_eid[0x00] disabled)
ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1)
ACPI: LSAPIC (acpi_id[0x0a] lsapic_id[0x00] lsapic_eid[0x00] disabled)
ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1)
ACPI: LSAPIC (acpi_id[0x0b] lsapic_id[0x00] lsapic_eid[0x00] disabled)
ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1)
ACPI: LSAPIC (acpi_id[0x0c] lsapic_id[0x00] lsapic_eid[0x00] disabled)
ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1)
ACPI: LSAPIC (acpi_id[0x0d] lsapic_id[0x00] lsapic_eid[0x00] disabled)
ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1)
ACPI: LSAPIC (acpi_id[0x0e] lsapic_id[0x00] lsapic_eid[0x00] disabled)
ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1)
ACPI: LSAPIC (acpi_id[0x0f] lsapic_id[0x00] lsapic_eid[0x00] disabled)
ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1)
ACPI: IOSAPIC (id[0x0] global_irq_base[0x33] address[00000000fec01000])
iosapic_init: Disabling PC-AT compatible 8259 interrupts
IOSAPIC: version 1.1, address 0xfec01000, GSIs 0x33-0x65
ACPI: IOSAPIC (id[0x0] global_irq_base[0x0] address[00000000fec00000])
iosapic_init: Disabling PC-AT compatible 8259 interrupts
IOSAPIC: version 1.1, address 0xfec00000, GSIs 0x0-0x32
ACPI: PLAT_INT_SRC (polarity[0x3] trigger[0x1] type[0x2] id[0x0000]
eid[0x0] ios
apic_vector[0x0] global_irq[0x5b]
PLATFORM int 0x2: GSI 0x5b(low,edge) -> CPU 0x0000 vector 48
ACPI: PLAT_INT_SRC (polarity[0x3] trigger[0x1] type[0x2] id[0x0000]
eid[0x0] ios
apic_vector[0x0] global_irq[0x5c]
PLATFORM int 0x2: GSI 0x5c(low,edge) -> CPU 0x0000 vector 49
ACPI: PLAT_INT_SRC (polarity[0x3] trigger[0x1] type[0x2] id[0x0000]
eid[0x0] ios
apic_vector[0x0] global_irq[0x5d]
PLATFORM int 0x2: GSI 0x5d(low,edge) -> CPU 0x0000 vector 50
ACPI: PLAT_INT_SRC (polarity[0x3] trigger[0x1] type[0x2] id[0x0000]
eid[0x0] ios
apic_vector[0x0] global_irq[0x5e]
PLATFORM int 0x2: GSI 0x5e(low,edge) -> CPU 0x0000 vector 51
ACPI: PLAT_INT_SRC (polarity[0x3] trigger[0x1] type[0x2] id[0x0000]
eid[0x0] ios
apic_vector[0x0] global_irq[0x5f]
PLATFORM int 0x2: GSI 0x5f(low,edge) -> CPU 0x0000 vector 52
ACPI: PLAT_INT_SRC (polarity[0x3] trigger[0x1] type[0x2] id[0x0000]
eid[0x0] ios
apic_vector[0x0] global_irq[0x60]
PLATFORM int 0x2: GSI 0x60(low,edge) -> CPU 0x0000 vector 53
ACPI: PLAT_INT_SRC (polarity[0x3] trigger[0x1] type[0x2] id[0x0000]
eid[0x0] ios
apic_vector[0x0] global_irq[0x61]
PLATFORM int 0x2: GSI 0x61(low,edge) -> CPU 0x0000 vector 54
ACPI: PLAT_INT_SRC (polarity[0x3] trigger[0x1] type[0x2] id[0x0000]
eid[0x0] ios
apic_vector[0x0] global_irq[0x62]
PLATFORM int 0x2: GSI 0x62(low,edge) -> CPU 0x0000 vector 55
ACPI: PLAT_INT_SRC (polarity[0x3] trigger[0x1] type[0x1] id[0x0000]
eid[0x0] ios
apic_vector[0x3] global_irq[0x2e]
PLATFORM int 0x1: GSI 0x2e(low,edge) -> CPU 0x0000 vector 3
ACPI: NMI_SRC (polarity[0x1] trigger[0x1] global_irq[0xd])
1 CPUs available, 1 CPUs total
Mca related initialization done
On node 0 totalpages: 62407
zone(0): 65536 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=scsi0:/vmlinuz root=805 hda=ide-scsi
console=tty
S0,115200 ro
ide_setup: hda=ide-scsi
FPSWA interface at 0x1de72010, revision 1.12
CPU 0: base freq=200.000MHz, ITC ratio=9/2, ITC freq=900.000MHz
Console: colour VGA+ 80x25
Calibrating delay loop... 1133.40 BogoMIPS
Placing software IO TLB between 0xe000000001598000 - 0xe000000003598000
Memory: 952608k/998512k available (3916k code, 45904k reserved, 1847k data,
256k
 init)
Total Huge_TLB_Page memory pages allocated 32
Dentry cache hash table entries: 65536 (order: 6, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 6, 1048576 bytes)
Mount-cache hash table entries: 1024 (order: 0, 16384 bytes)
Buffer-cache hash table entries: 65536 (order: 5, 524288 bytes)
Page-cache hash table entries: 65536 (order: 5, 524288 bytes)
POSIX conformance testing by UNIFIX
ACPI: Subsystem revision 20020815
PCI: Using SAL to access configuration space
ACPI: Interpreter enabled
ACPI: Using IOSAPIC for interrupt routing
ACPI: System [ACPI] (supports    ACPI-0175: *** Error: Sleep State package
eleme
nts are not both Integers (Integer, [NULL Object Descriptor])
    ACPI-0175: *** Error: Sleep State package elements are not both
Integers (In
teger, [NULL Object Descriptor])
    ACPI-0175: *** Error: Sleep State package elements are not both
Integers (In
teger, [NULL Object Descriptor])
)
ACPI: PCI Root Bridge [P000] (00:00)
PCI: Probing PCI hardware on bus (00:00)
ACPI: PCI Root Bridge [P001] (00:01)
PCI: Probing PCI hardware on bus (00:01)
ACPI: PCI Root Bridge [P002] (00:02)
PCI: Probing PCI hardware on bus (00:02)
ACPI: PCI Root Bridge [P010] (00:05)
PCI: Probing PCI hardware on bus (00:05)
ACPI: PCI Root Bridge [P011] (00:07)
PCI: Probing PCI hardware on bus (00:07)
ACPI: PCI Root Bridge [P012] (00:09)
PCI: Probing PCI hardware on bus (00:09)
PCI: Probing PCI hardware
PCI->APIC IRQ transform: (00:03.0 INTA) -> CPU 0x0000 vector 56
PCI->APIC IRQ transform: (00:04.0 INTA) -> CPU 0x0000 vector 57
PCI: no interrupt route for 00:00:05 pin A
PCI->APIC IRQ transform: (00:05.2 INTD) -> CPU 0x0000 vector 58
PCI->APIC IRQ transform: (00:05.3 INTD) -> CPU 0x0000 vector 58
PCI->APIC IRQ transform: (01:03.0 INTA) -> CPU 0x0000 vector 59
PCI->APIC IRQ transform: (01:03.1 INTB) -> CPU 0x0000 vector 60
PCI->APIC IRQ transform: (01:04.0 INTA) -> CPU 0x0000 vector 61
iosapic_fixup_pci_interrupt: changing vector 37 from IO-SAPIC-edge to
IO-SAPIC-l
evel
PCI->APIC IRQ transform: (01:04.1 INTB) -> CPU 0x0000 vector 37
PCI: Via IRQ fixup for 00:05.2, from 0 to 10
PCI: Via IRQ fixup for 00:05.3, from 0 to 10
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
perfmon: version 1.0 (sampling format v1.0) IRQ 238
perfmon: 47 bits counters
perfmon: 4 PMC/PMD pairs, 16 PMCs, 18 PMDs
PAL Information Facility v0.5
EFI Variables Facility v0.05 2002-Mar-26
Starting kswapd
kinoded started
VFS: Diskquotas version dquot_6.5.0 initialized
aio_setup: num_physpages = 15601
aio_setup: sizeof(struct page) = 88
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_I
RQ DETECT_IRQ SERIAL_PCI enabled
ÿttyS00 at 0x03f8 (irq = 44) is a 16550A
EFI Time Services Driver v0.3
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 29
VP_IDE: detected chipset, but driver not compiled in!
PCI: Found IRQ 0 for device 00:05.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:DMA, hdb:DMA
hda: HL-DT-STCD-RW/DVD DRIVE GCC-4160N, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 34
ide-floppy driver 0.99.newide
RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
loop: loaded (max 16 devices)
ide-floppy driver 0.99.newide
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 1088kB freed
VFS: Mounted root (ext2 filesystem).
Loading module mptbase ...


********************
and then the boot process stops.
********************

Un saludo / Best regards / Bien Cordialement,

José RODRIGUEZ RUIBAL
Linux specialist - RHCE (Red Hat Certified Engineer)
IBM EMEA PSSC - Montpellier (France)
tel/fax: +33 (0) 467 34 42 50 / 62 45
Jose.Rodriguez.Ruibal@fr.ibm.com





^ permalink raw reply	[flat|nested] 7+ messages in thread
end of thread, other threads:[~2003-01-16 21:38 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-01-16  0:37 [Linux-ia64] Problem booting SuSE SLES 8 beta (kernel 2.4.9) on Itanium 2 box Jose Rodriguez Ruibal
2003-01-16  1:26 ` Grant Grundler
2003-01-16 16:29 ` [Linux-ia64] Problem booting SuSE SLES 8 beta (kernel 2.4.9) on Itanium Jose Rodriguez Ruibal
2003-01-16 17:25 ` [Linux-ia64] Problem booting SuSE SLES 8 beta (kernel 2.4.9) on Itanium 2 box Grant Grundler
2003-01-16 19:13 ` [Linux-ia64] Problem booting SuSE SLES 8 beta (kernel 2.4.19) " Grant Grundler
2003-01-16 19:29 ` Egan Ford
2003-01-16 21:38 ` [Linux-ia64] Problem booting SuSE SLES 8 beta (kernel 2.4.19) on Jose Rodriguez Ruibal

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.