* SiS 7018 audio problem
@ 2002-02-28 16:59 Ezhik Lesnoy
0 siblings, 0 replies; only message in thread
From: Ezhik Lesnoy @ 2002-02-28 16:59 UTC (permalink / raw)
To: linux-sound
Hello everybody!
I have a laptop computer with SiS 630 chipset.
My audio card is PCI SiS 7018, integrated in this chipset.
I've tried very hard to get it working, but all in vain.
I would be very grateful if someone helps me to solve this problem...
Card specifications:
/proc/pci:
Bus 0, device 1, function 4:
Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI
Audio Accelerator (rev 1).
IRQ 5.
Master Capable. Latency\x128. Min Gnt=2.Max Lat$.
I/O at 0x1000 [0x10ff].
Non-prefetchable 32 bit memory at 0x38003000 [0x38003fff].
scanpci:
pci bus 0x0000 cardnum 0x01 function 0x04: vendor 0x1039 device 0x7018
SiS Device unknown
Linux initialization information:
...
PCI: Cannot allocate resource region 0 of device 00:01.4
...
PCI: Found IRQ 5 for device 00:01.6
PCI: Sharing IRQ 5 with 00:01.4
PCI: Sharing IRQ 5 with 00:0c.1
...
It shares IRQ with WinModem and with "CardBus bridge: Texas Instruments
PCI1420".
My kernel is 2.4.17, I recompiled sound modules with a lot of debug output.
When I use trident kernel module, it loads correctly, but the card is
absolutely silent.
Output from dmesg is as follows:
Trident 4DWave/SiS 7018/ALi 5451,Tvia CyberPro 5050 PCI Audio, version
0.14.9d, 23:57:36 Feb 24 2002
PCI: Found IRQ 5 for device 00:01.4
PCI: Sharing IRQ 5 with 00:01.6
PCI: Sharing IRQ 5 with 00:0c.1
trident: SiS 7018 PCI Audio found at IO 0x1000, IRQ 5
ac97_codec: AC97 codec, id: 0x0000:0x0000 (Unknown)
...
When I copy .au file to /dev/dsp or 'play' .wav file, it does not produce
any sound, writes a lot of debug information. I placed it at the end of my
message.
A few things to add:
I had the Red Hat 7.0 and Mandrake 8.0, but their precompiled kernels and
sound setup utilities never worked too.
I tried to use different Alsa trident modules, but they could not even
detect my sound card - very strange.
Full output from dmesg when I
1) modprobe trident module
2) copy .au file to /dev/dsp
3) play .wav file with "play"
Trident 4DWave/SiS 7018/ALi 5451,Tvia CyberPro 5050 PCI Audio, version
0.14.9d, 23:57:36 Feb 24 2002
PCI: Found IRQ 5 for device 00:01.4
PCI: Sharing IRQ 5 with 00:01.6
PCI: Sharing IRQ 5 with 00:0c.1
trident: SiS 7018 PCI Audio found at IO 0x1000, IRQ 5
ac97_codec: AC97 codec, id: 0x0000:0x0000 (Unknown)
ac97_codec: wrote OSS mixer 0 (Primary ac97 register 0x02), left vol:67,
right vol:67: 0x1515 -> 0x0000
ac97_codec: wrote OSS mixer 4 (Primary ac97 register 0x18), left vol:67,
right vol:67: 0x0a0a -> 0x0000
ac97_codec: wrote OSS mixer 5 (Primary ac97 register 0x0a), left vol:67,
right vol:67: 0x000a -> 0x0000
ac97_codec: wrote OSS mixer 6 (Primary ac97 register 0x10), left vol:67,
right vol:67: 0x0a0a -> 0x0000
ac97_codec: wrote OSS mixer 7 (Primary ac97 register 0x0e), left vol: 0,
right vol: 0: 0x8000 -> 0x0000
ac97_codec: wrote OSS mixer 8 (Primary ac97 register 0x12), left vol:67,
right vol:67: 0x0a0a -> 0x0000
ac97_codec: wrote OSS mixer 12 (Primary ac97 register 0x1c), left vol:67,
right vol:67: 0x0a0a -> 0x0000
ac97_codec: wrote OSS mixer 14 (Primary ac97 register 0x16), left vol:67,
right vol:67: 0x0a0a -> 0x0000
ac97_codec: wrote OSS mixer 20 (Primary ac97 register 0x0c), left vol:67,
right vol:67: 0x000a -> 0x0000
ac97_codec: wrote OSS mixer 21 (Primary ac97 register 0x06), left vol:67,
right vol:67: 0x0015 -> 0x0000
ac97_codec: wrote OSS mixer 22 (Primary ac97 register 0x14), left vol:67,
right vol:67: 0x0a0a -> 0x0000
ac97_codec: AC97 codec, id: 0x0000:0x0000 (Unknown)
ac97_codec: wrote OSS mixer 0 (Secondary ac97 register 0x02), left vol:67,
right vol:67: 0x1515 -> 0x0000
ac97_codec: wrote OSS mixer 4 (Secondary ac97 register 0x18), left vol:67,
right vol:67: 0x0a0a -> 0x0000
ac97_codec: wrote OSS mixer 5 (Secondary ac97 register 0x0a), left vol:67,
right vol:67: 0x000a -> 0x0000
ac97_codec: wrote OSS mixer 6 (Secondary ac97 register 0x10), left vol:67,
right vol:67: 0x0a0a -> 0x0000
ac97_codec: wrote OSS mixer 7 (Secondary ac97 register 0x0e), left vol: 0,
right vol: 0: 0x8000 -> 0x0000
ac97_codec: wrote OSS mixer 8 (Secondary ac97 register 0x12), left vol:67,
right vol:67: 0x0a0a -> 0x0000
ac97_codec: wrote OSS mixer 12 (Secondary ac97 register 0x1c), left vol:67,
right vol:67: 0x0a0a -> 0x0000
ac97_codec: wrote OSS mixer 14 (Secondary ac97 register 0x16), left vol:67,
right vol:67: 0x0a0a -> 0x0000
ac97_codec: wrote OSS mixer 20 (Secondary ac97 register 0x0c), left vol:67,
right vol:67: 0x000a -> 0x0000
ac97_codec: wrote OSS mixer 21 (Secondary ac97 register 0x06), left vol:67,
right vol:67: 0x0015 -> 0x0000
ac97_codec: wrote OSS mixer 22 (Secondary ac97 register 0x14), left vol:67,
right vol:67: 0x0a0a -> 0x0000
trident: Enable Loop Interrupts, globctl = 0x10000000
trident: called trident_set_dac_rate : rate = 8000
trident: open virtual channel 0, hard channel 63
trident: trident_write called, count = 4096
trident: allocated 32768 (order = 3) bytes at c0228000
trident: trident_play_setup, LBA = 0x00228000, Delta = 0x000002ab, ESO 0x00007fff, Control = 0x00001000
trident: prog_dmabuf(63), sample rate = 8000, format = 0, numfrag = 4,
fragsize = 8192 dmasize = 32768
trident: enabled IRQ on channel 63, AINTEN_B = 0x00000000(addr:DC)
trident: start voice on channel 63, START_B = 0x00000000(addr:B4)
trident: trident_write called, count = 4096
trident: enabled IRQ on channel 63, AINTEN_B = 0x00000000(addr:DC)
trident: start voice on channel 63, START_B = 0x00000000(addr:B4)
trident: trident_write called, count = 4096
trident: enabled IRQ on channel 63, AINTEN_B = 0x00000000(addr:DC)
trident: start voice on channel 63, START_B = 0x00000000(addr:B4)
trident: trident_write called, count = 4096
trident: enabled IRQ on channel 63, AINTEN_B = 0x00000000(addr:DC)
trident: start voice on channel 63, START_B = 0x00000000(addr:B4)
trident: trident_write called, count = 4096
trident: enabled IRQ on channel 63, AINTEN_B = 0x00000000(addr:DC)
trident: start voice on channel 63, START_B = 0x00000000(addr:B4)
trident: trident_write called, count = 4096
trident: enabled IRQ on channel 63, AINTEN_B = 0x00000000(addr:DC)
trident: start voice on channel 63, START_B = 0x00000000(addr:B4)
trident: trident_write called, count = 4096
trident: enabled IRQ on channel 63, AINTEN_B = 0x00000000(addr:DC)
trident: start voice on channel 63, START_B = 0x00000000(addr:B4)
trident: trident_write called, count = 4096
trident: enabled IRQ on channel 63, AINTEN_B = 0x00000000(addr:DC)
trident: start voice on channel 63, START_B = 0x00000000(addr:B4)
trident: trident_write called, count = 4096
trident: enabled IRQ on channel 63, AINTEN_B = 0x00000000(addr:DC)
trident: start voice on channel 63, START_B = 0x00000000(addr:B4)
trident: closing virtual channel 0, hard channel 63
trident: stop voice on channel 63, STOP_B = 0x00000000(addr:B8)
trident: disabled IRQ on channel 63, AINTEN_B = 0x00000000(addr:DC)
trident: called trident_set_dac_rate : rate = 8000
trident: open virtual channel 0, hard channel 63
trident: trident_ioctl, command = 1, arg = 0x4005f3f9
trident: trident_ioctl, command = 0, arg = 0x00000000
trident: stop voice on channel 63, STOP_B = 0x00000000(addr:B8)
trident: disabled IRQ on channel 63, AINTEN_B = 0x00000000(addr:DC)
trident: trident_ioctl, command = 4, arg = 0x00000000
trident: allocated 32768 (order = 3) bytes at c0228000
trident: trident_play_setup, LBA = 0x00228000, Delta = 0x000002ab, ESO 0x00007fff, Control = 0x00001000
trident: prog_dmabuf(63), sample rate = 8000, format = 0, numfrag = 4,
fragsize = 8192 dmasize = 32768
trident: trident_ioctl, command = 1, arg = 0x00000000
trident: trident_ioctl, command = 5, arg = 0x00000008
trident: stop voice on channel 63, STOP_B = 0x00000000(addr:B8)
trident: disabled IRQ on channel 63, AINTEN_B = 0x00000000(addr:DC)
trident: trident_ioctl, command = 3, arg = 0x00000000
trident: stop voice on channel 63, STOP_B = 0x00000000(addr:B8)
trident: disabled IRQ on channel 63, AINTEN_B = 0x00000000(addr:DC)
trident: trident_ioctl, command = 2, arg = 0x00005622
trident: stop voice on channel 63, STOP_B = 0x00000000(addr:B8)
trident: disabled IRQ on channel 63, AINTEN_B = 0x00000000(addr:DC)
trident: called trident_set_dac_rate : rate = 22050
trident: trident_write called, count = 8192
trident: trident_play_setup, LBA = 0x00228000, Delta = 0x0000075a, ESO 0x00007fff, Control = 0x00001000
trident: prog_dmabuf(63), sample rate = 22050, format = 0, numfrag = 4,
fragsize = 8192 dmasize = 32768
trident: enabled IRQ on channel 63, AINTEN_B = 0x00000000(addr:DC)
trident: start voice on channel 63, START_B = 0x00000000(addr:B4)
trident: trident_write called, count = 8192
trident: enabled IRQ on channel 63, AINTEN_B = 0x00000000(addr:DC)
trident: start voice on channel 63, START_B = 0x00000000(addr:B4)
trident: trident_write called, count = 8192
trident: enabled IRQ on channel 63, AINTEN_B = 0x00000000(addr:DC)
trident: start voice on channel 63, START_B = 0x00000000(addr:B4)
trident: trident_write called, count = 8192
trident: enabled IRQ on channel 63, AINTEN_B = 0x00000000(addr:DC)
trident: start voice on channel 63, START_B = 0x00000000(addr:B4)
trident: trident_write called, count = 8192
trident: enabled IRQ on channel 63, AINTEN_B = 0x00000000(addr:DC)
trident: start voice on channel 63, START_B = 0x00000000(addr:B4)
trident: playback schedule timeout, dmasz 32768 fragsz 8192 count 32768
hwptr 0 swptr 0
trident: enabled IRQ on channel 63, AINTEN_B = 0x00000000(addr:DC)
trident: start voice on channel 63, START_B = 0x00000000(addr:B4)
trident: closing virtual channel 0, hard channel 63
trident: stop voice on channel 63, STOP_B = 0x00000000(addr:B8)
trident: disabled IRQ on channel 63, AINTEN_B = 0x00000000(addr:DC)
That seems to be it. May be you could give me some advise.
Good-bye!
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2002-02-28 16:59 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-02-28 16:59 SiS 7018 audio problem Ezhik Lesnoy
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.