From: Rich Sahlender <rsahlen@voicenet.com>
To: ultralinux@vger.kernel.org
Subject: sparc64 mt race?
Date: Thu, 29 Oct 1998 14:17:26 +0000 [thread overview]
Message-ID: <marc-linux-ultrasparc-90967139815468@msgid-missing> (raw)
I'm not sure if this is a kernel, scsi, or 32 .vs. 64 bit issue...
Using the latest 2.1.126 from vger cvs with ultrapenguin-1.0.9 on an
Ultra1, a simple "mt -f /dev/st0 off" to unload a tape sends the cpu
to 100%. Running processes continue but cannot terminate, new processes
will not start. dmesg shows:
esp0: IRQ 3,7e0 SCSI ID 7 Clock 40 MHz CCF=8 Time-Out 167 NCR53C9XF(espfast) detected
esp0: FAST chip is fasHME (family\x10, version=5)
ESP: Total of 1 ESP hosts found, 1 actually in use.
scsi0 : Sparc ESP366-HME
scsi : 1 host.
Vendor: SEAGATE Model: ST32171W SUN2.1G Rev: 7462
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: EXABYTE Model: EXB-85008SQANXBA Rev: 07J0
Type: Sequential-Access ANSI SCSI revision: 02
Detected scsi tape st0 at scsi0, channel 0, id 4, lun 0
Vendor: TOSHIBA Model: XM5701TASUN12XCD Rev: 0997
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0
scsi : detected 1 SCSI tape 1 SCSI cdrom 1 SCSI disk total.
esp0: Disabling sync for buggy Toshiba CDROM.
esp0: Disabling DISCONNECT for target 6 lun 0
esp0: target 6 asynchronous
Uniform CDROM driver Revision: 2.14
esp0: Disabling DISCONNECT for target 0 lun 0
esp0: 16 byte WIDE transfers enabled for target 0.
esp0: target 0 [period 100ns offset 15 20.00MHz FAST-WIDE SCSI-II]
SCSI device sda: hdwr sector= 512 bytes. Sectors= 4157201 [2029 MB] [2.0 GB]
sunhme.c:v1.2 10/Oct/96 David S. Miller (davem@caipfs.rutgers.edu)
eth0: HAPPY MEAL (SBUS) 10/100baseT Ethernet 08:00:20:8d:21:cd
Partition check:
sda: sda1 sda2 sda3 sda4 sda6 sda7 sda8
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 151224k swap-space (priority -1)
Swansea University Computer Society IPX 0.38 for NET3.037
IPX Portions Copyright (c) 1995 Caldera, Inc.
eth0: Link is up using internal transceiver at 100Mb/s, Full Duplex.
sunmouse: Successfully adjusted to 1200 baud.
Nothing unusual there nor in syslog. Is there anything else I can
provide to help?
Regards,
Rich
next reply other threads:[~1998-10-29 14:17 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
1998-10-29 14:17 Rich Sahlender [this message]
1998-10-29 23:06 ` sparc64 mt race? Eddie C. Dost
1998-10-30 13:51 ` Rich Sahlender
1998-10-30 20:15 ` Roger J. Allen
1998-10-30 21:21 ` Rich Sahlender
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-linux-ultrasparc-90967139815468@msgid-missing \
--to=rsahlen@voicenet.com \
--cc=ultralinux@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.