All of lore.kernel.org
 help / color / mirror / Atom feed
* ultrapenguin-1.1.9 problems
@ 1999-03-12 10:47 Karl-Olov Serrander
  1999-03-12 10:57 ` Elliott Hughes
  1999-03-12 17:16 ` Jakub Jelinek
  0 siblings, 2 replies; 3+ messages in thread
From: Karl-Olov Serrander @ 1999-03-12 10:47 UTC (permalink / raw)
  To: ultralinux

Hi

1 During install it was not possible to create a boot floppy.
  Later when i try to access /dev/fd0 i get:
    floppy0: probe failed
    floppy0: probe failed
    floppy0: probe failed
    ...

  Works ok in solaris7

2 silo.conf does not seem to be correct. I can only boot
  linux, not solaris as i have entered during install.

3 I can't choose 1152*900 when configuring X. Sun monitors
  (in my case 20" GDM-20D10) does not seem to be included
  in configuration script.

My configuration:
  Ultra5 with 132 Mb mem
  no IDE disk
  SCSI glm0 (53C875)
  DISK SEAGATE-ST34520W 4.3 Gb
    slice 1 Solaris
    slice 2 linux
    slice 3 solaris swap
    slice 4 linux swap
  Monitor Sun 20" GDM-20D10

  I also have a graphics card TECH-SOURCE Raptor GFX 8P
  which have not tried to use with linux.


4 prompt$ /sbin/modinfo
  The insmod/rmmod combined binary is having an identity crisis.
  Please give it a proper name.

I have upgraded to XFree86*-3.3.3.1-2.sparc.rpm and kernel*-2.2.2-3.sparc64.rpm
but floppy still does not work.

5 what is the status for sound ?

Regards
-- 
Karl-Olov Serrander kase@cntw.com

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re:  ultrapenguin-1.1.9 problems
  1999-03-12 10:47 ultrapenguin-1.1.9 problems Karl-Olov Serrander
@ 1999-03-12 10:57 ` Elliott Hughes
  1999-03-12 17:16 ` Jakub Jelinek
  1 sibling, 0 replies; 3+ messages in thread
From: Elliott Hughes @ 1999-03-12 10:57 UTC (permalink / raw)
  To: ultralinux

> 1 During install it was not possible to create a boot floppy.

no, the floppy didn't work on my Ultra10 either.

> 2 silo.conf does not seem to be correct. I can only boot
>   linux, not solaris as i have entered during install.

what i found was that the boot record was written to the
wrong disc. i could boot both Linux and Solaris from silo,
but getting to silo required that i boot from the disc i hadn't
told the install program to put it on.

> 5 what is the status for sound ?

seems to be unimplemented. all the relevant ioctls fail for
me, and i can't write either. "Operation not supported by
device."

-- 
"Plan 9? Ah, yes: Plan 9 deals with the resurrection of the dead."
	http://plan9.bell-labs.com/plan9/

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: ultrapenguin-1.1.9 problems
  1999-03-12 10:47 ultrapenguin-1.1.9 problems Karl-Olov Serrander
  1999-03-12 10:57 ` Elliott Hughes
@ 1999-03-12 17:16 ` Jakub Jelinek
  1 sibling, 0 replies; 3+ messages in thread
From: Jakub Jelinek @ 1999-03-12 17:16 UTC (permalink / raw)
  To: ultralinux

> 
> Hi
> 
> 1 During install it was not possible to create a boot floppy.
>   Later when i try to access /dev/fd0 i get:
>     floppy0: probe failed
>     floppy0: probe failed
>     floppy0: probe failed
>     ...
> 
>   Works ok in solaris7

We'll have a look on it. What I know so far is that floppy boot does not
work on any 64bit sparc with the exception of UltraAX and AXi, and that on
the Ultra5 we have here, which runs solaris7 the floppy does not work at
all.
> 
> 2 silo.conf does not seem to be correct. I can only boot
>   linux, not solaris as i have entered during install.

That's a bug in the installer in that it offers something what does not
work. At the moment one should install Linux with silo -t (or choose install
into partition in the installer) and boot linux from there if he wants dual
boot.
> 
> 3 I can't choose 1152*900 when configuring X. Sun monitors
>   (in my case 20" GDM-20D10) does not seem to be included
>   in configuration script.
> 

There are two issues: first I'd like to use DDC to actually query the
monitor info, second is that Xconfigurator does not handle 1152x900 at all.
If I manage to write DDC support for Mach64 soon enough, I could then
collect all DDC ids of Sun monitors and appropriate modelines.

But you can configure it by hand in /etc/X11/XF86Config and 1152x900 should
work then just fine.

> 
>   I also have a graphics card TECH-SOURCE Raptor GFX 8P
>   which have not tried to use with linux.

Raptor is not yet supported AFAIK.
> 
> 
> 4 prompt$ /sbin/modinfo
>   The insmod/rmmod combined binary is having an identity crisis.
>   Please give it a proper name.

Sorry, will work on fix for this.

> 
> 5 what is the status for sound ?

AFAIK sound on ss5 and Ultra[12] sbus works just fine (I have UltraAX on the
desk, so no sound at all), but ebus cs4231 driver is not finished (that's
what Ultra5/Ultra10 has). Ask Derrick Brashear for more info.

Cheers,
    Jakub
___________________________________________________________________
Jakub Jelinek | jj@sunsite.mff.cuni.cz | http://sunsite.mff.cuni.cz
Administrator of SunSITE Czech Republic, MFF, Charles University
___________________________________________________________________
UltraLinux  |  http://ultra.linux.cz/  |  http://ultra.penguin.cz/
Linux version 2.2.3 on a sparc64 machine (3958.37 BogoMips)
___________________________________________________________________

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~1999-03-12 17:16 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
1999-03-12 10:47 ultrapenguin-1.1.9 problems Karl-Olov Serrander
1999-03-12 10:57 ` Elliott Hughes
1999-03-12 17:16 ` Jakub Jelinek

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.