* Raid5 on a 450 problem
@ 1999-04-28 15:37 Flavio Pescuma
1999-04-28 16:07 ` David Miller
0 siblings, 1 reply; 2+ messages in thread
From: Flavio Pescuma @ 1999-04-28 15:37 UTC (permalink / raw)
To: ultralinux
Hi
I'm trying to set up a 450 with Ultralinux-1.1.9 kernel 2.2.5 with 3 8Gb
disks using raid5 (software)
Everything seems to go fine, I'm able to create the raid5 with three
disks, make ext2 file system, mount it, etc... but after reboot the
second and third disk on the raid becomes corrupted and the raid doesn't
come up. Even fdisk doesn't recognize the parameters of the disks which
I need to re-enter manually
Suggestions?
Regards,
Flavio
--
WIRE - Web & Internet Resources at Ericsson
Flavio Pescuma phone: +46 (0)8 7263359
L M Ericsson Data AB fax: +46 (0)8 7217207
125 82 Stockholm Sweden http://eriweb.ericsson.se
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Raid5 on a 450 problem
1999-04-28 15:37 Raid5 on a 450 problem Flavio Pescuma
@ 1999-04-28 16:07 ` David Miller
0 siblings, 0 replies; 2+ messages in thread
From: David Miller @ 1999-04-28 16:07 UTC (permalink / raw)
To: ultralinux
Date: Wed, 28 Apr 1999 17:37:03 +0200
From: Flavio Pescuma <edtfopa@malmen.ericsson.se>
Even fdisk doesn't recognize the parameters of the disks which I
need to re-enter manually
Do not start partitions at cylinder 0 which will be part of a raid,
begin them at cylinder 1 instead, the same goes for swap partitions.
Later,
David S. Miller
davem@redhat.com
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~1999-04-28 16:07 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
1999-04-28 15:37 Raid5 on a 450 problem Flavio Pescuma
1999-04-28 16:07 ` David Miller
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.