From: Florian Lohoff <flo@rfc822.org>
To: ultralinux@vger.kernel.org
Subject: Re: RAID is now working...
Date: Sun, 19 Sep 1999 21:02:40 +0000 [thread overview]
Message-ID: <marc-linux-ultrasparc-93777522332062@msgid-missing> (raw)
In-Reply-To: <marc-linux-ultrasparc-93761559712738@msgid-missing>
On Fri, Sep 17, 1999 at 09:50:55PM -0400, David A. Cooley wrote:
> At 06:41 PM 9/17/99 -0700, David S. Miller wrote:
> > Date: Fri, 17 Sep 1999 20:44:54 -0400
> > From: "David A. Cooley" <n5xmt@bellsouth.net>
> >
> > Anyone know where I can get a firmware upgrade for the Qlogic SBUS
> > cards that will flash them under Linux??? (or how to do it from the
> > boot prompt on an Ultra II?????)
> >
> >It needs to be loaded by the driver, so you'd need to update the
> >firmware in the drivers/scsi/qlogicpti_asm.h source file in the
> >kernel, then rebuild the kernel with the new driver and reboot.
> >
> >Matt Jacob has newer firmware in his ISP driver collection, but I have
> >not tried nor tested it on any of my SBUS isp cards so I cannot say if
> >it works or not. In the past, my attempts to load newer firmware or
> >allow firmware loading on newer cards has resulted in one problem or
> >another and this is why it is not updated in the latest drivers, so
> >be forwarned.
>
> Ah..
> Is there a firmware that has problems, or will running 2 different firmware
> levels in 2 cards cause problems?
> My 2 cards are 1.21 and 1.25
As i understand Dave and the Source on every initializing of the Cards
the firmware gets loaded into the chips ... So you will always
end up with the firmware in the driver ...
Flo
PS: I have got problems with the QlogicPTI SBUS too. I have problems
under high raid load where the SCSI bus seems to freeze (The drivers
does ongoing resets of the single targets which does not stop until
i switch the machine off)
PPS: I am also interested in testing new firmware ...
--
Florian Lohoff flo@rfc822.org +49-5241-470566
... The failure can be random; however, when it does occur, it is
catastrophic and is repeatable ... Cisco Field Notice
next prev parent reply other threads:[~1999-09-19 21:02 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
1999-09-18 0:44 RAID is now working David A. Cooley
1999-09-18 1:41 ` David S. Miller
1999-09-18 1:50 ` David A. Cooley
1999-09-19 21:02 ` Florian Lohoff [this message]
1999-09-19 23:40 ` David Cooley
1999-09-21 12:27 ` Florian Lohoff
1999-09-22 1:02 ` Florian Lohoff
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-linux-ultrasparc-93777522332062@msgid-missing \
--to=flo@rfc822.org \
--cc=ultralinux@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.