All of lore.kernel.org
 help / color / mirror / Atom feed
From: David Cooley <n5xmt@bellsouth.net>
To: ultralinux@vger.kernel.org
Subject: Re: RAID is now working...
Date: Sun, 19 Sep 1999 23:40:59 +0000	[thread overview]
Message-ID: <marc-linux-ultrasparc-93778451004968@msgid-missing> (raw)
In-Reply-To: <marc-linux-ultrasparc-93761559712738@msgid-missing>

At 11:02 PM 9/19/1999 +0200, Florian Lohoff wrote:

>As i understand Dave and the Source on every initializing of the Cards
>the firmware gets loaded into the chips ... So you will always
>end up with the firmware in the driver ...

Yep... Looking at the code in qlogicpti.c that's what it does... The 
firmware is in qlogicpti_asm.c



>Flo
>PS: I have got problems with the QlogicPTI SBUS too. I have problems
>     under high raid load where the SCSI bus seems to freeze (The drivers
>     does ongoing resets of the single targets which does not stop until
>     i switch the machine off)


Mine started doing that on the second PTI card I installed... Got looking 
at the boot messages where it first detects the cards... My old one 
(working fine) is detected as ultra scsi... the "new one" is detected as 
fast scsi...  Both cards have the same SUN part number on them, but the 
"new" one has ver 1.71 on the sticker on the prom on the board, and the 
"old" one (the one that works all the time) has 1.73 on it.  The code read 
by the kernel driver in the boards is 1.21 for the one that fails and 1.25 
on the good one.

=============================David Cooley N5XMT Internet: N5XMT@bellsouth.net
Packet: N5XMT@KQ4LO.#INT.NC.USA.NA T.A.P.R. Member #7068
We are Borg... Prepare to be assimilated!
=============================

  parent reply	other threads:[~1999-09-19 23:40 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
1999-09-18  0:44 RAID is now working David A. Cooley
1999-09-18  1:41 ` David S. Miller
1999-09-18  1:50 ` David A. Cooley
1999-09-19 21:02 ` Florian Lohoff
1999-09-19 23:40 ` David Cooley [this message]
1999-09-21 12:27 ` Florian Lohoff
1999-09-22  1:02 ` Florian Lohoff

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=marc-linux-ultrasparc-93778451004968@msgid-missing \
    --to=n5xmt@bellsouth.net \
    --cc=ultralinux@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.