From: Ryan Cresawn <cresawn@vaquero.LaRC.NASA.GOV>
To: ultralinux@vger.kernel.org
Subject: SCSI strangeness on Ultra2
Date: Wed, 06 Oct 1999 18:08:24 +0000 [thread overview]
Message-ID: <marc-linux-ultrasparc-93923506202161@msgid-missing> (raw)
I'm having some trouble on my Ultra2 with the SCSI busses. If I am
accessing the ZIP 250 drive on the second SCSI bus then it will really
confuse the whole system. Keyboard doesn't take input, programs
freeze their operation, X freezes for minutes and then begins to
work. If you would like more info let me know.
*** output of `uname -a' ***
Linux grimlock.larc.nasa.gov 2.2.12 #1 Wed Oct 6 10:06:57 EDT 1999 sparc64 unknown
*** trimmed output of `dmesg' ***
esp0: IRQ 3,7e0 SCSI ID 7 Clk 40MHz CCF=8 TOut 167 NCR53C9XF(espfast)
esp1: IRQ 7,7c3 SCSI ID 7 Clk 25MHz CCF=5 TOut 167 NCR53C90A(esp100a)
ESP: Total of 2 ESP hosts found, 2 actually in use.
scsi0 : Sparc ESP366-HME
scsi1 : Sparc ESP100A (NCR53C90A)
scsi : 2 hosts.
Vendor: FUJITSU Model: MAB3045S SUN4.2G Rev: 1806
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 1, lun 0
Vendor: FUJITSU Model: MAE3182LC Rev: 0108
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 2, lun 0
Vendor: TOSHIBA Model: XM5701TASUN12XCD Rev: 2395
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0
Vendor: IOMEGA Model: ZIP 250 Rev: H.41
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi removable disk sdc at scsi1, channel 0, id 5, lun 0
scsi : detected 1 SCSI cdrom 3 SCSI disks total.
esp0: target 6 asynchronous
Uniform CDROM driver Revision: 2.55
esp0: target 1 [period 100ns offset 15 20.00MHz FAST-WIDE SCSI-II]
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8385121 [4094 MB] [4.1 GB]
esp0: target 2 [period 100ns offset 15 20.00MHz FAST-WIDE SCSI-II]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 35700480 [17431 MB] [17.4 GB]
scsi : aborting command due to timeout : pid 60, scsi1, channel 0, id 5, lun 0 Read Capacity 00 00 00 00 00 00 00
00 00
esp1: Aborting command
esp1: dumping state
esp1: dma -- cond_reg<94000010> addr<0e010001>
esp1: SW [sreg<06> sstep<01> ireg<10>]
esp1: HW reread [sreg<06> sstep<c1> ireg<10>]
esp1: current command [tgt<05> lun<00> pphase<MSGOUT> cphase<MSGOUTDONE>]
esp1: disconnected
SCSI host 1 abort (pid 60) timed out - resetting
SCSI bus is being reset for host 1 channel 0.
esp1: Resetting scsi bus
esp1: Gross error sreg@
esp1: SCSI bus reset interrupt
esp1: illegal command
esp1: dumping state
esp1: dma -- cond_reg<96000201> addr<0e01000b>
esp1: SW [sreg<06> sstep<01> ireg<40>]
esp1: HW reread [sreg<93> sstep<84> ireg<18>]
esp1: current command [tgt<05> lun<00> pphase<UNISSUED> cphase<SLCTNORM>]
esp1: disconnected
esp1: Forcing async and disabling disconnect for target 5
esp1: Resetting scsi bus
esp1: SCSI bus reset interrupt
esp1: SCSI bus reset interrupt
--
Ryan
next reply other threads:[~1999-10-06 18:08 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
1999-10-06 18:08 Ryan Cresawn [this message]
1999-10-06 18:51 ` SCSI strangeness on Ultra2 David S. Miller
1999-10-06 19:04 ` Ryan Cresawn
1999-10-06 19:20 ` David S. Miller
1999-10-06 19:31 ` Ryan Cresawn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-linux-ultrasparc-93923506202161@msgid-missing \
--to=cresawn@vaquero.larc.nasa.gov \
--cc=ultralinux@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.