All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Jernej Škrabec" <jernej.skrabec@gmail.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Chen-Yu Tsai <wens@kernel.org>,
	Samuel Holland <samuel@sholland.org>,
	Jun Yan <jerrysteve1101@gmail.com>
Cc: Jun Yan <jerrysteve1101@gmail.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] arm64: dts: allwinner: h6: taiqicat-a01: Enable Ethernet
Date: Tue, 17 Nov 2026 17:37:55 +0100	[thread overview]
Message-ID: <n0Gb_HzYRTi_JMXR8vuZwg@gmail.com> (raw)
In-Reply-To: <20261117142122.246986-1-jerrysteve1101@gmail.com>

Dne torek, 17. november 2026 ob 15:21:21 Srednjeevropski standardni čas je Jun Yan napisal(a):
> The TaiqiCat A01 has a 100 Mbit/s Ethernet port, which uses the EPHY
> integrated into the co-packaged AC200 of the Allwinner H6 SoC.
> 
> The AC200 derives its 24 MHz reference clock from PWM1, so enable the
> PWM controller and the pwm-clock node that supplies it. Also enable
> I2C3, over which the AC200 is accessed, and describe the AC200 EPHY
> package on the EMAC MDIO bus, with the EMAC operating in RMII mode.
> 
> Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej

> 
> ---
> The AC200 MFD and EPHY drivers/bindings and the sun50i-h6.dtsi AC200
> description this depends on are already merged in sunxi/dt-for-7.5.
> ---
>  .../dts/allwinner/sun50i-h6-taiqicat-a01.dts  | 40 +++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts
> index 225f42bd3b9e..9b192caeecb2 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts
> @@ -14,6 +14,7 @@ / {
>  	compatible = "ultrapower,taiqicat-a01", "allwinner,sun50i-h6";
>  
>  	aliases {
> +		ethernet0 = &emac;
>  		ethernet1 = &sdio_wifi;
>  		serial0 = &uart0;
>  	};
> @@ -87,6 +88,10 @@ wifi_pwrseq: wifi-pwrseq {
>  	};
>  };
>  
> +&ac200_clk {
> +	status = "okay";
> +};
> +
>  &cpu0 {
>  	cpu-supply = <&reg_dcdca>;
>  };
> @@ -107,6 +112,14 @@ &ehci3 {
>  	status = "okay";
>  };
>  
> +&emac {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&rmii_pins>;
> +	phy-mode = "rmii";
> +	phy-handle = <&ac200_ephy>;
> +	status = "okay";
> +};
> +
>  &gpu {
>  	mali-supply = <&reg_dcdcc>;
>  	status = "okay";
> @@ -123,6 +136,29 @@ hdmi_out_con: endpoint {
>  	};
>  };
>  
> +&i2c3 {
> +	status = "okay";
> +};
> +
> +&mdio {
> +	ethernet-phy-package@1 {
> +		compatible = "x-powers,ac200-ephy-package";
> +		reg = <1>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		vcc-supply = <&reg_aldo2>;
> +		nvmem-cells = <&ephy_calibration>;
> +		nvmem-cell-names = "configuration";
> +		x-powers,ac200 = <&ac200>;
> +		x-powers,xmii-rx-clock-inverted;
> +
> +		ac200_ephy: ethernet-phy@1 {
> +			compatible = "ethernet-phy-id0044.1400";
> +			reg = <1>;
> +		};
> +	};
> +};
> +
>  &mmc0 {
>  	vmmc-supply = <&reg_cldo1>;
>  	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
> @@ -173,6 +209,10 @@ &pio {
>  	vcc-pg-supply = <&reg_bldo3>;
>  };
>  
> +&pwm {
> +	status = "okay";
> +};
> +
>  &r_i2c {
>  	status = "okay";
>  
> 





      parent reply	other threads:[~2026-11-17 16:37 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-17 14:21 [PATCH] arm64: dts: allwinner: h6: taiqicat-a01: Enable Ethernet Jun Yan
2026-11-17 14:38 ` sashiko-bot
2026-11-17 16:37 ` Jernej Škrabec [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=n0Gb_HzYRTi_JMXR8vuZwg@gmail.com \
    --to=jernej.skrabec@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jerrysteve1101@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=robh@kernel.org \
    --cc=samuel@sholland.org \
    --cc=wens@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.