* Re: USB CF reader reboots PC
From: Eli Carter @ 2003-01-08 17:50 UTC (permalink / raw)
To: Murray J. Root; +Cc: linux-kernel
In-Reply-To: <20030108173356.GA1189@Master.Wizards>
Murray J. Root wrote:
> Ooops - kernel 2.5.5[234]
>
> On Wed, Jan 08, 2003 at 11:51:30AM -0500, Murray J. Root wrote:
>
>>ASUS P4S533 (SiS645DX chipset)
>>P4 2GHz
>>1G PC2700 RAM
>>SanDisk SDDR-77 ImageMate Dual Card Reader (using only CF cards)
>>
>>----------------------------
>>devfs compiled in to kernel, devfs=nomount in lilo.conf
>>
>>Insert CF card. mount it. cd to it, do reads and/or writes
>>umount card. remove card.
>>insert a different card (does not happen if the same card is used)
>>mount it. system reboots. logs are corrupted
>>
>>Doesn't happen every time for read - sometimes I can read 2 or 3 cards first
>>Happens every time for write - if I write to a card then changing cards
>>causes a reboot
>>
[snip]
Somewhat similar vein, but a different set of symptoms, I've seen a
RedHat box not see that the CF card changed...
(USB SanDisk CF & SD reader, also using only CF cards.)
insert 128MB CF card.
everything is ok.
remove 128MB CF card, still see 128MB partition
insert 256MB CF card.
see 128MB partition.
(based on /proc/partitions)
I've not followed this up to figure out why yet.
You might check that situation to see if yours is related at all.
Eli
--------------------. "If it ain't broke now,
Eli Carter \ it will be soon." -- crypto-gram
eli.carter(a)inet.com `-------------------------------------------------
^ permalink raw reply
* Re: [Linux-ia64] IA-32 emulation issues
From: Bjorn Helgaas @ 2003-01-08 17:42 UTC (permalink / raw)
To: linux-ia64
In-Reply-To: <marc-linux-ia64-105590709805630@msgid-missing>
> I think this has been fixed in 2.5 already: the problem was that the
> x86 version of sys_open() ended up turning on the O_LARGEFILE flag,
> which was wrong (I think Andi Kleen pointed this out, originally).
> The fix was to add the sys32_open() wrapper. I don't recall if this
> has been added to 2.4.xx already. If not, it probably ought to be
> added.
I copied this change from 2.5 into 2.4:
# 02/12/03 davidm@tiger.hpl.hp.com 1.786.149.17
# ia64: For ia32 emulation, do not turn on O_LARGEFILE automatically
# on open(). Reported by Andi Kleen.
^ permalink raw reply
* Re: BDI-2000
From: Kerl, John @ 2003-01-08 17:44 UTC (permalink / raw)
To: 'Marius Groeger', 'cecilia.muaddi@alloptic.com'
Cc: 'linuxppc-embedded@lists.linuxppc.org'
I think Marius' problem and mine were generalizations
of the same issue -- there can't be *any* mappings in
the kernel with virtual address below 0xc0000000.
(This includes regions mapped 1-1 as a special case.)
I couldn't put the IMMR at 0x38000000; I moved it to
0xf0000000. Marius found that on-chip RAM was mapped
at 0x70000000; that was bad too. Also the CPLD on
my board which does LED control is mapped in at
0xf8000000 -- also above the 0xc0000000. So I am
skeptical when Cecilia says she has "some other IO
mapped to miscellaneous addresses". What are those
miscellaneous virtual addresses?
The difference, though, is that Marius & I both had
problems entering user mode. Cecilia's is just a few
lines from the top of head_8xx.S, without yet having
made any subroutine calls to anything more complicated.
There's not much room for anything to have gone wrong
yet, in the Linux kernel code. So I agree that getting
the vxWorks boot ROM out of the picture (e.g. using
PPCBoot instead) would be an interesting test.
-----Original Message-----
From: Marius Groeger [mailto:mag@sysgo.de]
Sent: Wednesday, January 08, 2003 10:21 AM
To: Wells, Charles
Cc: 'linuxppc-embedded@lists.linuxppc.org'
Subject: Re: BDI-2000
On Wed, 8 Jan 2003, Wells, Charles wrote:
> When I read Cecilia's post, I assumed what the statement "proven hardware
> platform" meant was that the vxworks O/S and user tasks exercised all the
> peripheral hardware; i.e., the SDRAM works, the ROM works, the FLASH
works,
> the console works, etc. So, that statement made sense to me. While Linux
vxWorks doesn't use the MMU as much as Linux does. On Linux, the kernel and
all processes run in their own address space. The memory accesses involved
for cache or tlb refills are quite different to what's happening in a
vxWorks setup. Again, I'm probably overly pessimistic here, but we _have_
seen HW problems that just didn't show up when running vxWorks (AFAIR it was
a burst access on some early G4 based system.)
On a related matter, the following might also be interesting, especially
regarding the question of what firmware to use. The vxWorks boot-loader
tends to initialise _a lot_ of things you don't necessarily need. For
instance, on IBM405 based systems it sets up the on-chip RAM at address
0x70000000. Not a good idea when switching to user-mode the first time. Took
me quite some time to find this one... ;-)
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply
* Re: Problem reading directories
From: @ 2003-01-08 17:44 UTC (permalink / raw)
To: Sergey Suleymanov, Linux-MSDOS Mailing list
> Is C: drive lredired linux path or hdimage? How are you
> specify it in dosemu.conf?
>
is in a linux path, /var/lib/dosemu/freedos
in my /etc/dosemu.users my lib_dir is /var/lib/dosmeu
and in my ~/.dosemurc - hdimage=freedos
so, the created dir is something like
/var/lib/dosemu/freedos/#$compac.pro
i have played which the permission of the directory, but the problem
persist.
Jose
^ permalink raw reply
* [PATCH][RESEND x 4] Don't ask about "Enhanced Real Time Clock Support" on some archs
From: Tom Rini @ 2003-01-08 17:53 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Kernel Mailing List
The following patch adds an explicit no list of arches who do not want
to have the "Enhanced Real Time Clock Support" RTC driver asked. This
adds PPC32 (who for a long time had their own 'generic' RTC driver, and
then have adopted the genrtc driver) and PARISC (who have always used
the genrtc driver). Per request of Peter Chubb, IA64 is on this list as
well.
The problem is that on some archs there is no hope of this driver
working, and having it compiled into the kernel can cause many different
problems. On the other hand, there are some arches for whom that driver
does work, on some platforms. So having an explicit yes list would
result in some rather ugly statements.
--
Tom Rini (TR1265)
http://gate.crashing.org/~trini/
===== drivers/char/Kconfig 1.1 vs edited =====
--- 1.1/drivers/char/Kconfig Tue Oct 29 18:16:55 2002
+++ edited/drivers/char/Kconfig Wed Nov 13 07:56:39 2002
@@ -1053,6 +1053,7 @@
config RTC
tristate "Enhanced Real Time Clock Support"
+ depends on !PPC32 && !PARISC && !IA64
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
^ permalink raw reply
* Re: Why is Nvidia given GPL'd code to use in closed source drivers?
From: Ranjeet Shetye @ 2003-01-08 18:10 UTC (permalink / raw)
To: linux-kernel
In-Reply-To: <E18WB8O-0004jy-00@fencepost.gnu.org>
Richard,
The last time I tried installing the GNU Operating System without the
Linux Kernel, it wouldn't boot. Dont know why. I had my /bin/ls and my
/bin/make installed but they just wouldn't boot the computer.
I finally installed a Windows 98 kernel to help the GNU operating system
(i.e. ls and make) and now I can happily state that my computer is
running a GNU Operating System with a Windows 98 kernel.
Doesn't that sound silly ???????
Know why ? cos (Operating System == kernel), in this case, its Linux,
and the GNU stuff refers to the utilities only.
Mind you, they are VERY IMPORTANT utilities, but utilities nonetheless.
To call them an operating system is ridiculous, as I think I proved in
the earlier part of my mail.
Ranjeet Shetye.
Senior Software Engineer.
^ permalink raw reply
* [linux-lvm] LVM2 snapshot creation problem
From: Gary Windham @ 2003-01-08 17:48 UTC (permalink / raw)
To: linux-lvm
I am testing LVM2 under the 2.4.20 (vanilla) kernel running on RedHat
8.0. I'm Using device-mapper0.96.07 and the userspace tools
LVM2.1.95.13 packages. I applied the device-mapper kernel patches
located at
http://people.sistina.com/~thornber/patches/2.4-stable/2.4.20/2.4.20-dm-2.tar.bz2.
My problem is that I have not been able to create LV snapshots under
LVM2. Here's an example (command and output follow):
===
# /lvm2/sbin/lvcreate -s -L 20g -n snap -v mytestvg/testlv
Setting chunksize to 16 sectors.
Finding volume group "mytestvg"
Creating logical volume snap
Archiving volume group "mytestvg" metadata.
Found volume group "mytestvg"
Loading mytestvg-snap
Found volume group "mytestvg"
Zeroing start of logical volume "snap"
Found volume group "mytestvg"
Removing mytestvg-snap
Found volume group "mytestvg"
Found volume group "mytestvg"
Found volume group "mytestvg"
Loading mytestvg-testlv-real
Loading mytestvg-testlv
Loading mytestvg-snap-cow
Loading mytestvg-snap
device-mapper ioctl cmd 2 failed: Invalid argument
Couldn't load device 'mytestvg-snap'.
Creating volume group backup "/etc/lvm/backup/mytestvg"
Logical volume "snap" created
===
The logical volume is then in an "INACTIVE destination" for my original
LV, and cannot be activated. All I can do is "lvremove" it.
Any advice would be most appreciated!
Thanks,
--Gary
--
Gary Windham
Systems Programmer, Principal
The University of Arizona, CCIT
^ permalink raw reply
* Re: USB CF reader reboots PC
From: Murray J. Root @ 2003-01-08 17:59 UTC (permalink / raw)
To: linux-kernel
In-Reply-To: <3E1C64CE.8050709@inet.com>
On Wed, Jan 08, 2003 at 11:50:06AM -0600, Eli Carter wrote:
> Murray J. Root wrote:
> >Ooops - kernel 2.5.5[234]
> >
> >On Wed, Jan 08, 2003 at 11:51:30AM -0500, Murray J. Root wrote:
> >
> >>ASUS P4S533 (SiS645DX chipset)
> >>P4 2GHz
> >>1G PC2700 RAM
> >>SanDisk SDDR-77 ImageMate Dual Card Reader (using only CF cards)
> >>
> >>----------------------------
> >>devfs compiled in to kernel, devfs=nomount in lilo.conf
> >>
> >>Insert CF card. mount it. cd to it, do reads and/or writes
> >>umount card. remove card.
> >>insert a different card (does not happen if the same card is used)
> >>mount it. system reboots. logs are corrupted
> >>
> >>Doesn't happen every time for read - sometimes I can read 2 or 3 cards
> >>first
> >>Happens every time for write - if I write to a card then changing cards
> >>causes a reboot
> >>
> [snip]
>
> Somewhat similar vein, but a different set of symptoms, I've seen a
> RedHat box not see that the CF card changed...
> (USB SanDisk CF & SD reader, also using only CF cards.)
>
> insert 128MB CF card.
> everything is ok.
> remove 128MB CF card, still see 128MB partition
> insert 256MB CF card.
> see 128MB partition.
> (based on /proc/partitions)
>
> I've not followed this up to figure out why yet.
> You might check that situation to see if yours is related at all.
Using Mandrake Cooker and nope - it sees the change
That's actually part of the symptoms - if I put the
same card back in, no problem. It's only if I use a
different card that it reboots.
--
Murray J. Root
------------------------------------------------
DISCLAIMER: http://www.goldmark.org/jeff/stupid-disclaimers/
------------------------------------------------
Mandrake on irc.freenode.net:
#mandrake & #mandrake-linux = help for newbies
#mdk-cooker = Mandrake Cooker
#cooker = moderated Mandrake Cooker
^ permalink raw reply
* Re: [Lustre-devel] Re: fixing redundant network opens on Linux file creation
From: Bryan Henderson @ 2003-01-08 17:52 UTC (permalink / raw)
To: Andreas Dilger
Cc: Jan Hudec, linux-fsdevel, linux-fsdevel-owner,
Lustre Development Mailing List, Richard Sharpe, samba-technical,
Mike Shaver, Steven French
In-Reply-To: <20030107115056.U31555@schatzie.adilger.int>
>I don't see where you are coming from here. Could you be more specific on
>whether you think the entity declaring an "intent" is user-space, the VFS
>code in fs/*.c, the filesystem driver code in fs/*/*.c or what?
As a general principle, any of those things could declare intent. In the
Lustre design we're talking about, I don't believe any of them does. Hence
my objection to the term "intent." Based on that word, I thought at first
I might just have missed something in the definition of the interface, but
I don't think so anymore.
>I don't
>really see where you can "change your mind" in the middle of creating a
>file, unless there was an error somewhere along the way.
I don't either. (And apparently, simple errors are no exception in the
Lustre design). Hence, you have declared significantly more than an intent
when you did the lookup.
>If you call
>sys_mkdir() you have declared an "intent" to create a directory
Not as "intent" is usually understood. If you call sys_mkdir(), you have
commanded the kernel to create the directory. That's a lot different from
declaring that you intend to create the directory.
I believe the lustre patch works. I also believe it uses the wrong
terminology, creates an interface to filesystem drivers that is brittle and
hard to understand, and doesn't solve as wide a range of problems as it
could. I believe that what it calls a declaration of intent is really a
declaration of what POSIX system call the caller is in the middle of
performing.
On the other hand, it has been pointed out that one of its goals was to
minimize the changes to fs/*.c. I agree the patch is a good way to achieve
that goal.
If it were my decision, I would solve the Lustre problem, and the Samba
problem, and some of my own as well, by putting higher level filesystem
driver interfaces into Linux, such as some other kernels do. Let the
filesystem driver do the whole "lookup, create directory, add directory
entry" operation if it wants to, and in that case make just that one call
to the filesystem driver and be done. Let the filesystem driver deal with
the problems of failures halfway through the sequence.
But suggestions I've made to give more power to filesystem drivers have in
the past met resistance from those who want to keep centralized control and
maintain uniformity among the various filesystem types).
^ permalink raw reply
* Newbie - Where is my kernel? Can't run POM
From: Timothy Harryman @ 2003-01-08 17:53 UTC (permalink / raw)
To: netfilter
It certainly is not in /usr/src/linux (nautilus & terminal show that
/usr/src is empty - yes, I am showing all hidden/system files), nor
anywhere else I have looked.
I have a default installation of RH 8.0, and through rhupdate, it has
updated the kernel to 2.4.18-19.8.0
I am trying to install patch-o-matic 20030107, and the script prompts me
for the KERNEL_DIR.
This is extremely frustrating, and any help is hugely appreciated!
<>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <><
Timothy
timothy@woodlandscenics.com
^ permalink raw reply
* Re: [apache-modules] Best HTML Parser
From: Charles Reitzel @ 2003-01-08 17:53 UTC (permalink / raw)
Cc: apache-modules, DCOM, Linux Kernel, modssl-users, netfilter,
TEAMICE
In-Reply-To: <5.2.0.9.0.20030108124223.009f3e00@mail.SoftHome.net>
I am partial to HTML Tidy for a few reasons:
1) cross-platform, reentrant C library
2) very forgiving of sloppy, malformed markup
3) produces clean markup - XHTML if requested
4) C++, Perl, Pascal, COM and .NET bindings available,
others easily done with SWIG
But I must admit, as one of the primary developers, I am probably
biased. But if you need to get your markup cleaned up so that you can
apply XML tools to it, it is probably the best game in town.
For more info: http://tidy.sourceforge.net/
take it easy,
Charlie
At 12:43 PM 1/8/2003 +0530, Blesson Paul wrote:
>Hi all
> Which is the Best HTML Parser in C/C++
>
>regards
>Blesson Paul
^ permalink raw reply
* Re: ipv6 stack seems to forget to send ACKs
From: Fabio Massimo Di Nitto @ 2003-01-08 18:05 UTC (permalink / raw)
To: Wichert Akkerman; +Cc: netdev, linux-kernel
In-Reply-To: <20030108130850.GQ22951@wiggy.net>
I was able to reproduce the problem again. I have been using ethereal to
sniff instead of tcpdump and gave out some more info.
basically the icecast server at certain time (but i can't predict
exactly in which situations) just send a FIN, ACK packet to the client.
Basically to close the connection and after a few packets the client of
course answer.What is strange that in the meanwhile there are still 3/4
data packets coming from the server to the client.
Regarding the network side I noticed the following:
an average of 500ms to ping6 the server and 0 pkt loss
few seconds before the FIN, ACK (server->client) and for about 6 pkts the
average jumped to 2000ms
I suspect that this network flap made the server thinking about
<insert_here_whatever_term_is_more_appropriate> and decided to close
the connection.
The full ethereal dump is available at
http://www.fabbione.net/ice-xmms-ipv6.dump.bz2
but PLEASE note that it is a 10MB file and Im on a slow adsl line so be
"nice".
Fabio
PS Im afraid/happy that anyway the problem is not related to the kernel
version we are running.
--
vega:~# apt-get install life
Reading Package Lists... Done
Building Dependency Tree... Done
E: Couldn't find package life
^ permalink raw reply
* [STATUS 2.5] January 8, 2002
From: Guillaume Boissiere @ 2003-01-08 18:05 UTC (permalink / raw)
To: linux-kernel
Of note this week the merge of lm_sensors (drivers for health monitoring
hardware) and support for AGP 3.0.
See http://www.kernelnewbies.org/status/ for details.
Also, many more bugs have been entered in bugzilla, mostly compile problems
for broken drivers (http://bugzilla.kernel.org/)
-- Guillaume
List of the bugs up for adoption (i.e. noone is working on):
If you want to work on a bug, it is polite to mark it as 'Assigned' so
other people know you are working on it.
18 nor vojtech@suse.cz OPEN Synaptics touchpad driver
46 nor vojtech@suse.cz OPEN ide-scsi causing (Two mice: unwanted double-clicks & erra...
48 nor bugme-janitors@lists.osdl.org OPEN APM suspend and PCMCIA not cooperating
49 nor jsimmons@infradead.org OPEN register_console() called in illegal context
54 nor bugme-janitors@lists.osdl.org OPEN 100% reproduceable "null TTY for (####) in tty_fasync"
58 nor bcollins@debian.org OPEN OHCI-1394: sleeping function called from illegal context ...
69 nor jsimmons@infradead.org OPEN Framebuffer bug
72 nor jsimmons@infradead.org OPEN Framebuffer scrolls at the wrong times/places
79 nor jsimmons@infradead.org OPEN Framebuffer scrolling problem
93 nor khoa@us.ibm.com OPEN 2.5.48 bttv module compile error
94 nor bugme-janitors@lists.osdl.org OPEN file remain locked after sapdb process exist.
104 nor bugme-janitors@lists.osdl.org OPEN MIPS fails to build: asm/thread_info.h doesn't exist
110 nor bugme-janitors@lists.osdl.org OPEN Current bk Linux-2.5, VFS Kernel Panic from Devfs + NO UN...
115 nor bugme-janitors@lists.osdl.org OPEN Kernel modules won't load
122 nor bugme-janitors@lists.osdl.org OPEN emu10k1 OSS troubles
126 nor vojtech@suse.cz OPEN bzImage build failure on input devices support as module
134 nor bugme-janitors@lists.osdl.org OPEN 2.5.50 breaks pcmcia cards
135 nor bugme-janitors@lists.osdl.org OPEN SB16/Alsa doesn't work
138 nor bugme-janitors@lists.osdl.org OPEN Build error: drivers/video/sis/sis_main.h:299: parse erro...
142 low bugme-janitors@lists.osdl.org OPEN problem with ver_linux script and procps version
143 nor alan@lxorguk.ukuu.org.uk OPEN unable to read cd audio from atapi cdrom/cdrw/dvd device,...
145 nor bugme-janitors@lists.osdl.org OPEN ALSA: SB-AWE ISA detection fails
149 nor vojtech@suse.cz OPEN Laptop with touchpad and "pointer". Pointer never works
153 nor bugme-janitors@lists.osdl.org OPEN compile failure on drivers/char/riscom8.c
154 nor bugme-janitors@lists.osdl.org OPEN compile failure on drivers/char/esp.c
155 nor bugme-janitors@lists.osdl.org OPEN compile failure on drivers/char/specialix.c
157 hig bugme-janitors@lists.osdl.org OPEN Makefile bug? sound/synth/emux/built-in.o
158 nor bugme-janitors@lists.osdl.org OPEN depmod should be in README
159 nor bugme-janitors@lists.osdl.org OPEN compile failure on drivers/isdn/i4l/isdn_net_lib.c
160 nor jgarzik@pobox.com OPEN With 2 different nic on one system, dhcp configuration fails
161 nor jsimmons@infradead.org OPEN VESAfb in 2.5 somehow influences X resolution.
162 nor bugme-janitors@lists.osdl.org OPEN compile failure on drivers/media/video/bttv-cards.c
171 nor vojtech@suse.cz OPEN 2.5.51 at kb driver leaves kb ib state that prevents (sof...
172 nor jsimmons@infradead.org OPEN tdfxfb.c can't be compiled
174 nor bugme-janitors@lists.osdl.org OPEN link failure in function dvb_generic_ioctl: undefined ref...
179 nor bugme-janitors@lists.osdl.org OPEN boot from 21 sec/track floppy
183 nor andmike@us.ibm.com OPEN megaraid driver panics with IBM EXP300 enclosure
184 nor zippel@linux-m68k.org OPEN Unresolved symbols in crypto modules.
189 nor bugme-janitors@lists.osdl.org OPEN sscanf in lib/vsprintf.c ignores field width for numeric ...
191 nor akpm@digeo.com OPEN Panic on shutdown
192 nor axboe@suse.de OPEN loop.c IV calculation is broken since 2.4.x
193 nor bugme-janitors@lists.osdl.org OPEN sysrq umount bad ordering (real before loop)
195 nor bugme-janitors@lists.osdl.org OPEN compile failure on drivers/media/video/zr36067.c
196 nor bugme-janitors@lists.osdl.org OPEN compile failure on drivers/media/video/stradis.c
197 nor bugme-janitors@lists.osdl.org OPEN compile failure on drivers/media/video/tda9887.o
198 nor alan@lxorguk.ukuu.org.uk OPEN compile failure on drivers/message/i2o/i2o_lan.c
199 nor dwmw2@infradead.org OPEN compile failure on drivers/mtd/devices/blkmtd.c
200 nor dwmw2@infradead.org OPEN compile failure on drivers/mtd/ftl.c
201 nor jgarzik@pobox.com OPEN compile failure on drivers/net/fc/iph5526.c
203 nor jgarzik@pobox.com OPEN compile failure on drivers/net/wan/sdlamain.c
204 nor jgarzik@pobox.com OPEN compile failure on drivers/net/rcpci45.c
205 low jsimmons@infradead.org OPEN gpm mouse cursor flips chars on framebuffer console
206 nor jsimmons@infradead.org OPEN broken colors on framebuffer console
207 blo jsimmons@infradead.org OPEN Cirrus Logic Framebuffer -- Does not compile
208 nor jgarzik@pobox.com OPEN Build error in aironet4500_core.c
209 nor jsimmons@infradead.org OPEN Matrox Framebuffer -- Does not compile
211 nor greg@kroah.com OPEN Mounting a SM/CF reader does not work and does not return
213 nor andmike@us.ibm.com OPEN compile failure in drivers/scsi/ini9100u.c
214 nor bugme-janitors@lists.osdl.org OPEN Incorrect disabling of mate drive
215 nor andmike@us.ibm.com OPEN compile failure in drivers/scsi/pci2000.c
216 nor andmike@us.ibm.com OPEN compile failure in drivers/scsi/pci2220i.c
217 nor andmike@us.ibm.com OPEN compile failure in drivers/scsi/dpt_i2o.c
218 nor andmike@us.ibm.com OPEN compile failure in drivers/scsi/53c7,8xx.c
219 nor andmike@us.ibm.com OPEN compile failure in drivers/scsi/tmscsim.c
220 nor andmike@us.ibm.com OPEN compile failure in drivers/scsi/AM53C974.c
221 nor andmike@us.ibm.com OPEN compile failure in drivers/scsi/gdth.c
222 nor andmike@us.ibm.com OPEN compile failure in drivers/scsi/eata_dma.c
223 nor greg@kroah.com OPEN "usbdevfs is depreciated" message always printed even whe...
228 low bugme-janitors@lists.osdl.org OPEN Make pdfdocs/psdocs/htmldoc fail in 2.5.54
232 nor andmike@us.ibm.com OPEN out of bounds according to stanford checker
233 nor bugme-janitors@lists.osdl.org OPEN Out of bounds according to Andy Chou <acc@CS.Stanford.EDU>
234 nor bugme-janitors@lists.osdl.org OPEN Out of bounds according to Andy Chou <acc@cs.stanford.edu>
235 nor alan@lxorguk.ukuu.org.uk OPEN array out of bound according to Andy Chou <acc@cs.stanfor...
236 nor bugme-janitors@lists.osdl.org OPEN conversion error from Andy Chou <acc@cs.stanford.edu>
237 low bugme-janitors@lists.osdl.org OPEN buffer out of bounds from Andy Chou <acc@cs.stanford.edu>
238 low bugme-janitors@lists.osdl.org OPEN buffer out of bounds. From Andy Chou <acc@cs.stanford.edu>
239 low bugme-janitors@lists.osdl.org OPEN buffer out of bounds from Andy Chou <acc@cs.stanford.edu>
240 low bugme-janitors@lists.osdl.org OPEN possible off by one error from Andy Chou <acc@cs.stanford...
241 low ambx1@neo.rr.com OPEN buffer out of bounds from Andy Chou <acc@cs.stanford.edu>
242 low andmike@us.ibm.com OPEN buffer out of bounds in aha1542.c from Andy Chou <acc@cs....
243 low andmike@us.ibm.com OPEN possible out of bounds bug from Andy Chou <acc@cs.stanfor...
244 low andmike@us.ibm.com OPEN Possible bug from Andy Chou <acc@cs.stanford.edu>
245 low andmike@us.ibm.com OPEN Possible out of bound error in sym53c416.c from Andy Chou...
246 low andmike@us.ibm.com OPEN Possible missing assert in sym_malloc.c from acc@cs.stanf...
247 low bugme-janitors@lists.osdl.org OPEN Possible bug in fbgen.c from Stanford Checker
248 low bugme-janitors@lists.osdl.org OPEN Possible bug in sstfb.c from Stanford Checker
249 nor bugme-janitors@lists.osdl.org OPEN uninitialized pointer in sstfb.c from Stanford Checker
250 low bugme-janitors@lists.osdl.org OPEN Possible out of bounds error from Stanford Checker
252 low bugme-janitors@lists.osdl.org OPEN Possible out of bounds bug in sb_mixer.c from Stanford Ch...
253 low bugme-janitors@lists.osdl.org OPEN another possible out of bounds error in sb_mixer.c from S...
254 low bugme-janitors@lists.osdl.org OPEN One more possible out of bounds error in sb_mixer.c from ...
255 low bugme-janitors@lists.osdl.org OPEN Possible out of bounds error in ac97_patch.c from Stanfor...
256 nor jgarzik@pobox.com OPEN 3c509.c wants updating to new pnp model
List of bugs that have been claimed (i.e. someone is working on):
5 nor mbligh@aracnet.com ASSI 64GB highmem BUG()
7 nor willy@debian.org ASSI file lock accounting broken
8 low alan@lxorguk.ukuu.org.uk ASSI i2o_scsi does not handle reset properly
9 nor dbrownell@users.sourceforge... ASSI Ehci do not leave system in a sensible state for bios on ...
10 hig andrew.grover@intel.com ASSI USB HCs may have improper interrupt configuration with AC...
14 nor davej@codemonkey.org.uk ASSI No dri : unsupported Via chipset (device id: 3189)
15 nor alan@lxorguk.ukuu.org.uk ASSI No dma on first hard drive
16 nor willy@debian.org ASSI reproduceable oops in lock_get_status
29 low akpm@digeo.com ASSI Debug: sleeping function called from illegal context at m...
36 nor andmike@us.ibm.com ASSI Long tape rewind causes abort on aic7xxx
37 nor alan@lxorguk.ukuu.org.uk ASSI IDE problems on old pre-PCI HW
39 nor alan@lxorguk.ukuu.org.uk ASSI undefined reference to `boot_gdt_table'
43 nor jgarzik@pobox.com ASSI e100 drivers crashes on non cache-coherent platforms
44 blo khoa@us.ibm.com ASSI radeonfb does not compile at all - seems incomplete? or w...
51 nor paul@laufernet.com ASSI isapnp does not register devices in /proc/isapnp
52 nor andmike@us.ibm.com ASSI aic7xxx driver fails to boot on netfinity 7000
53 nor alan@lxorguk.ukuu.org.uk ASSI IDE cd-rom I/O error
63 nor wli@holomorphy.com ASSI compile error with CONFIG_HUGETLB_PAGE yes
66 blo zaitcev@yahoo.com ASSI SMP Kernel Compile for Sparc32 fails
71 hig andrew.grover@intel.com ASSI RTL8100BL (8139) do not work on acpi UP without local apic
83 low zippel@linux-m68k.org ASSI Wish: ability to quickly cycle through (NEW) config options
100 nor johnstul@us.ibm.com ASSI LTP - gettimeofday02 fails (time is going backwards)
105 nor johnstul@us.ibm.com ASSI gettimeofday cripples system running with notsc
106 nor mochel@osdl.org ASSI sysfs hierarchy can begin to disintegrate
111 hig wli@holomorphy.com ASSI hugetlbfs does not align pages
113 hig alan@lxorguk.ukuu.org.uk ASSI CMD649 or ALI15X3 problem under 2.5.49 and since many pre...
118 blo alan@lxorguk.ukuu.org.uk ASSI Load IDE-SCSI module causes OOPS in 2.5.49
119 nor andrew.grover@intel.com ASSI 2.5.49 - Dell Latitude weirdness at shutdown
123 blo alan@lxorguk.ukuu.org.uk ASSI SiL 680 IDE controller has "issues"
130 hig green@namesys.com ASSI problems mounting root partition with 2.5.48+ kernels
131 nor alan@lxorguk.ukuu.org.uk ASSI "hda: lost interrupt"; "hda: dma_intr: bad DMA status" on...
132 nor acme@conectiva.com.br ASSI windows ip check ARP packet replied by kernel when proxy_...
136 nor akpm@digeo.com ASSI FSID returned from statvfs always 0
140 nor andmike@us.ibm.com ASSI isp1020 driver reports error
146 low akpm@digeo.com ASSI Assertion failure in do_get_write_access() at fs/jbd/tra...
150 nor ambx1@neo.rr.com ASSI [PNP][2.5] IDE Detection problems (wrong IRQ and wrong ID...
151 nor jejb@hansenpartnership.com ASSI compile failure on drivers/block/ps2esdi.c
156 nor alan@lxorguk.ukuu.org.uk ASSI compile failure on drivers/ide/pci/nvidia.c
165 nor jgarzik@pobox.com ASSI Kernel crashes after stop network and remove e100.
166 nor jgarzik@pobox.com ASSI e100 spits out strange message during startup.
167 nor fdavis@si.rr.com ASSI compile failure on drivers/media/video/zr36120.c
168 nor fdavis@si.rr.com ASSI compile failure on drivers/media/video/saa7185.c
169 nor fdavis@si.rr.com ASSI compile failure on drivers/media/video/bt819.c
170 low akpm@digeo.com ASSI poisoned oops in dump_orphan_list
185 low alan@lxorguk.ukuu.org.uk ASSI mwave init yields: bad: scheduling while atomic!
188 nor wli@holomorphy.com ASSI proc_pid_readdir() holds the tasklist_lock for excessive ...
^ permalink raw reply
* RE: [linux-lvm] Graphical tool to configure LVM for RedHat 8
From: Mike (TrueTel) @ 2003-01-08 17:59 UTC (permalink / raw)
To: linux-lvm
In-Reply-To: <1042065949.3e1caa1d4258e@secure.st-peter.stw.uni-erlangen.de>
Try "lvmgui" , it did work for me
http://www.xs4all.nl/~mmj/lvm/
-----Original Message-----
From: linux-lvm-admin@sistina.com [mailto:linux-lvm-admin@sistina.com]On Behalf Of Svetoslav Slavtchev
Sent: Thursday, January 09, 2003 6:46 AM
To: linux-lvm@sistina.com; Ma, Thanh(IndSys, GE Interlogix)
Subject: RE: [linux-lvm] Graphical tool to configure LVM for RedHat 8
Quoting "Ma, Thanh(IndSys, GE Interlogix)" <Thanh.Ma@ge.com>:
>
>
> -----Original Message-----
> From: Anders Widman [mailto:andewid@tnonline.net]
> Sent: Wednesday, January 08, 2003 3:12 PM
> To: Linux-LVM@sistina.com
> Subject: Re: [linux-lvm] Graphical tool to configure LVM for RedHat 8
>
> * The command line tools are great but I just wonder if there is a
> graphical tool to do the same thing (for RedHat, BTW) ?
>
> I know RedHat 8 (graphical) installation has support for LVM and
> creating of LVM arrays. However, I have no idea if such tools are
> included after the installation.
> *
> * No. they are not.
>
> In any case. I do no recommend using 3rd party tools to configure and
> manage your disks.
> * What 3rd party tools can you suggest. ?
> * I guess this should be part of the FAQ as well.
>
> Thanh
try a google search for
lvmgui [java] and lvmviewer[perl i think]
both were the a bit abandend the last time i tried them,
but hopefully they'll work with RH8
may be( just may be) another solution would be
the tools provided with mandrake (diskdrake) or eventualy
the EVMS GUI (see http://evms.sf.net )
if you find some other pointers, drop a line :)
by the way SuSE had a perfect text(ncurses) installer(manager) for lvm since
SuSE 6.4 (i think about a year or two ago)
a lot of Luck,
svetljo
_______________________________________________
linux-lvm mailing list
linux-lvm@sistina.com
http://lists.sistina.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
^ permalink raw reply
* Re: tenth post about PCI code, need help
From: Ray Lee @ 2003-01-08 18:09 UTC (permalink / raw)
To: fretre3618, Linux Kernel
> 1. which device is at port address 0xCFB? (please note, NOT 0xCF8)
0xcfb ('bee') is the fourth byte of the 32 bit register that sits/starts
at 0xcf8 ('eight'). Note the difference in the code between the outb and
outl calls.
To answer your other questions, I think you'd have better luck reading
the spec for the x86 pc-style PCI bridge chip, rather than the (generic)
PCI v2.0 spec itself. The spec for the actual chip is always the final
authority for what's going on. (Unless, of course, it's wrong...)
Ray
^ permalink raw reply
* RE: Policy Language
From: Frank Mayer @ 2003-01-08 18:02 UTC (permalink / raw)
To: 'Westerman, Mark', 'Stephen D. Smalley', guttman,
selinux
In-Reply-To: <72222DC86846D411ABD300A0C9EB08A1015244A8@csoc-mail-box.csoconline.com>
> That why I am posting to the list to try and get a feel from the
> people who have created the tools.
Without comment on the specific proposal (which I haven't studied yet),
I do have a general request:
I would ask that we only change the policy syntax reluctantly and as
limited as possible, and only for strong need. Every time the language
changes, it can be a lot or little work for us to sync up our parser for
setools. Since we have a requirement to maintain backwards
compatibility with older policy syntax, each change can be a lot of
work.
Frank
--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.
^ permalink raw reply
* Re: [linux-lvm] LVM2 snapshot creation problem
From: Alasdair G Kergon @ 2003-01-08 18:04 UTC (permalink / raw)
To: linux-lvm
In-Reply-To: <3E1CB9E4.1030704@email.arizona.edu>
On Wed, Jan 08, 2003 at 04:53:08PM -0700, Gary Windham wrote:
> My problem is that I have not been able to create LV snapshots under
> LVM2. Here's an example (command and output follow):
(Assuming you've checked that device-mapper snapshot support
is compiled/loaded into the kernel)
Please turn on full debugging and look for the last few sets
of lines starting with 'Adding target' and 'dm'. [Lines
starting with other things are probably irrelevant here.]
Also check for kernel log messages from device-mapper
(e.g. /var/log/whatever).
See example.conf for details of how to log to a file, or run
with -vvv flags. If you prefer you could send us (dm@uk.sistina.com)
the whole (compressed) log file for the command and we'll take a
look.
Alasdair
--
agk@uk.sistina.com
^ permalink raw reply
* Re: USB CF reader reboots PC
From: Greg KH @ 2003-01-08 18:16 UTC (permalink / raw)
To: linux-kernel
In-Reply-To: <20030108165130.GA1181@Master.Wizards>
On Wed, Jan 08, 2003 at 11:51:30AM -0500, Murray J. Root wrote:
> devfs=mount in lilo.conf
>
> Insert CF card.
> ls /dev shows sda and sda1
> mount it.
> ls /dev shows sda - no sda1
> cd to mounted CF card
> process hangs, sd-mod & usb-storage "busy"
> rmmod -f usb-storage or sd-mod causes PC to stop
> (keyboard & mouse unresponsive, wmfire frozen, net disconnects)
>
> reboot
> Insert CF card.
> ls /dev shows sda & sda1
> mount it.
> ls /dev shows sda - no sda1
> umount it
> ls /dev shows sda - no sda1
> modprobe -r sd-mod && modprobe sd-mod
> ls /dev shows sda & sda1
So if devfs is enabled, everything works just fine?
thanks,
greg k-h
^ permalink raw reply
* Re: [PATCH] 2.4.20 IDE for 2.4.21-pre3
From: Tomas Szepe @ 2003-01-08 18:21 UTC (permalink / raw)
To: Michael Madore; +Cc: linux-kernel
In-Reply-To: <3E1C5EF7.8090004@aslab.com>
> [mmadore@aslab.com]
>
> I get the following oops when running 2.4.21-pre3 +
> 2.4.21-pre3-2420ide-1. The oops occurred after running the Cerberus
> stress test for about 5 hours. The machine uses an ASUS A7N8X single
> AMD Athlon XP motherboard with the Nvidia nforce2 chipset. I had to
> pass ide0=ata66 ide1=ata66 to the kernel in order to use DMA.
Michael,
are you able to reproduce this oops with vanilla 2.4.20?
--
Tomas Szepe <szepe@pinerecords.com>
^ permalink raw reply
* Linux 2.4.21-pre3-ac1
From: Alan Cox @ 2003-01-08 18:24 UTC (permalink / raw)
To: linux-kernel
Its back, its smaller and it wants a lot of testing. Much of the older
stuff has been merged with Marcelo, and some stuff has been dropped out.
+ Handle battery quirk on the Vaio Z600-RE (Paul Mitcheson)
* EHCI USB updates (David Brownell)
+ IDE Raid support for AMI/SI 'Medley' IDE Raid (Arjan van de Ven)
+ NVIDIA nForce2 IDE PCI identifiers (Johannes Deisenhofer,
Tim Krieglstein)
* CPU bitmask truncation fix (Bjorn Helgaas)
o HP100 cleanup (Pavel Machek)
o Fix initial capslock handling on USB keyboard (Pete Zaitcev)
+ Update dscc4 driver for new wan (Francois Romieu)
+ Fix boot on Chaintech 4BEA/4BEA-R and (Alexander Achenbach)
Gigabyte 9EJL by handing wacky E820 memory
reporting
o SysKonnect driver updates (Mirko Lindner)
o Fix memory leak in n_hdlc (Paul Fulghum)
o Fix missing mtd dependancy (Herbert Xu)
+ Clean up ide-tape printk stuff (Pete Zaitcev)
+ IDE tape fixes (Pete Zaitcev)
o Fix size reporting of large disks in scsi (Andries Brouwer)
+ Fix excessive stack usage in NMI handlers (Mikael Pettersson)
+ Add support for Epson 785EPX USB printer pcmcia (Khalid Aziz)
* Quirk handler to sort out IDE compatibility (Ivan Kokshaysky)
mishandling
+ Model 1 is valid for PIV in MP table (Egenera)
+ Ethernet padding fixes for various drivers (me)
o Allow trident codec setup to time out (Ian Soboroff)
This can happen with non PM codecs
o Fix broken documentation link (Henning Meier-Geinitz)
o Update video4linux docbook (William Stimson)
o Correct kmalloc check in dpt_i2o (Pablo Menichini)
o Shrink kmap area to required space only (Manfred Spraul)
o Fix irq balancing (Ben LaHaise)
o CPUfreq updates (Dominik Brodowski)
o Fix typo in pmagb fb (John Bradford)
o EDD backport (Matt Domsch)
o First pass at fixing all the ethernet padding (me)
REMOVED FOR NOW
- RMAP
REMOVED FOR GOOD
- LLC (See 2.5)
- VaryIO (Never accepted mainstream)
^ permalink raw reply
* Re: USB CF reader reboots PC
From: Murray J. Root @ 2003-01-08 18:24 UTC (permalink / raw)
To: linux-kernel
In-Reply-To: <20030108181645.GC3127@kroah.com>
On Wed, Jan 08, 2003 at 10:16:45AM -0800, Greg KH wrote:
> On Wed, Jan 08, 2003 at 11:51:30AM -0500, Murray J. Root wrote:
> > devfs=mount in lilo.conf
> >
> > Insert CF card.
> > ls /dev shows sda and sda1
> > mount it.
> > ls /dev shows sda - no sda1
> > cd to mounted CF card
> > process hangs, sd-mod & usb-storage "busy"
> > rmmod -f usb-storage or sd-mod causes PC to stop
> > (keyboard & mouse unresponsive, wmfire frozen, net disconnects)
> >
> > reboot
> > Insert CF card.
> > ls /dev shows sda & sda1
> > mount it.
> > ls /dev shows sda - no sda1
> > umount it
> > ls /dev shows sda - no sda1
> > modprobe -r sd-mod && modprobe sd-mod
> > ls /dev shows sda & sda1
>
> So if devfs is enabled, everything works just fine?
>
How did you come to that conclusion?
sda1 is where the data is - when I mount the CF sda1 disappears
from /dev and accessing the mountpoint hangs the process.
--
Murray J. Root
------------------------------------------------
DISCLAIMER: http://www.goldmark.org/jeff/stupid-disclaimers/
------------------------------------------------
Mandrake on irc.freenode.net:
#mandrake & #mandrake-linux = help for newbies
#mdk-cooker = Mandrake Cooker
#cooker = moderated Mandrake Cooker
^ permalink raw reply
* Re: Question for Marcelo
From: Samuel Flory @ 2003-01-08 18:22 UTC (permalink / raw)
To: Alan Cox; +Cc: Linux Kernel Mailing List
In-Reply-To: <1042034152.24099.4.camel@irongate.swansea.linux.org.uk>
Alan Cox wrote:
>On Wed, 2003-01-08 at 02:34, Samuel Flory wrote:
>
>
>> I believe that he would prefer that it get tested in the ac tree 1st.
>> Alan seemed receptive to including it, but he's not doing much with the
>>2.4 ac kernel any more.
>>
>>
>>
>
>I've been working on merging a lot of stuff with Marcelo and cleaning up the
>other changes. 2.4.21pre-ac should be out today, and its a lot smaller than
>before as Marcelo as almost all the apic stuff, IDE updates etc. I've also
>dropped rmap out for now
>
Sorry if that came out like you were slacking off. I know 2.5 and ide
is taking up most of your time.
--
There is no such thing as obsolete hardware.
Merely hardware that other people don't want.
(The Second Rule of Hardware Acquisition)
Sam Flory <sflory@rackable.com>
^ permalink raw reply
* Re: Newbie - Where is my kernel? Can't run POM
From: Athan @ 2003-01-08 18:18 UTC (permalink / raw)
To: Timothy Harryman; +Cc: netfilter
In-Reply-To: <002301c2b73e$e0f36ca0$3f00a8c0@tharryman>
[-- Attachment #1: Type: text/plain, Size: 1145 bytes --]
On Wed, Jan 08, 2003 at 11:53:38AM -0600, Timothy Harryman wrote:
> It certainly is not in /usr/src/linux (nautilus & terminal show that
> /usr/src is empty - yes, I am showing all hidden/system files), nor
> anywhere else I have looked.
>
> I have a default installation of RH 8.0, and through rhupdate, it has
> updated the kernel to 2.4.18-19.8.0
>
> I am trying to install patch-o-matic 20030107, and the script prompts me
> for the KERNEL_DIR.
RH is almost certainly using seperate runtime and source packages for
the kernel. Looking at http://www.rpmfind.net/ I see things like:
kernel-2.4.20-2.6.i686.rpm
kernel-2.4.20-2.6.src.rpm
The first being the compiled kernel and modules, the latter the source
for it. So go find kernel-2.4.18-19.8.0.src.rpm, or even better upgrade
packages to a 2.4.20 kernel the current latest stable release.
HTH,
-Ath
--
- Athanasius = Athanasius(at)miggy.org / http://www.miggy.org/
Finger athan(at)fysh.org for PGP key
"And it's me who is my enemy. Me who beats me up.
Me who makes the monsters. Me who strips my confidence." Paula Cole - ME
[-- Attachment #2: Type: application/pgp-signature, Size: 240 bytes --]
^ permalink raw reply
* Re: Status of linuxppc_2.5
From: Benjamin Herrenschmidt @ 2003-01-08 18:18 UTC (permalink / raw)
To: Boris Bezlaj; +Cc: Pantelis Antoniou, linuxppc-dev
In-Reply-To: <20030108173215.GA1002@bandit.kista.gajba.net>
On Wed, 2003-01-08 at 18:32, Boris Bezlaj wrote:
> On Wed, Jan 08, 2003 at 11:18:10AM +0200, Pantelis Antoniou wrote:
>
> > BTW, are there any gotchas, or anything
> > I should pay attention moving
> > from 2.4 -> 2.5?
>
> AFAIK, you need the new module-init-tools for loading/unloading modules.
>
> I see there is a little patch for swim3 driver. Do you have any problems
> with swim3 driver in 2.4 kernel when writing to floppy? What is the status
> in v2.5?
What patch ? I'm interested ;)
So far, swim3 in 2.5 is not up-to-date to new BIO semantics in 2.5. I've wanted
to do that for some time now but didn't find time yet.
Ben.
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply
* Re: [PATCH] 2.4.20 IDE for 2.4.21-pre3
From: Michael Madore @ 2003-01-08 18:29 UTC (permalink / raw)
To: Tomas Szepe; +Cc: linux-kernel
In-Reply-To: <20030108182112.GQ823@louise.pinerecords.com>
Tomas Szepe wrote:
>>[mmadore@aslab.com]
>>
>>I get the following oops when running 2.4.21-pre3 +
>>2.4.21-pre3-2420ide-1. The oops occurred after running the Cerberus
>>stress test for about 5 hours. The machine uses an ASUS A7N8X single
>>AMD Athlon XP motherboard with the Nvidia nforce2 chipset. I had to
>>pass ide0=ata66 ide1=ata66 to the kernel in order to use DMA.
>>
>>
>
>Michael,
>
>are you able to reproduce this oops with vanilla 2.4.20?
>
>
>
I'll try this and post my results.
Mike
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.