* Re: [PATCH] regex: do not call `regfree()` if compilation fails
From: Eric Sunshine @ 2018-05-22 2:20 UTC (permalink / raw)
To: Stefan Beller; +Cc: Martin Ågren, git, Johannes Schindelin
In-Reply-To: <CAGZ79kZotwAFauTkCJ6YZ_C-MuaQpNaaS8LCniL_Or=_ccfC4w@mail.gmail.com>
On Mon, May 21, 2018 at 2:43 PM, Stefan Beller <sbeller@google.com> wrote:
> On Sun, May 20, 2018 at 3:50 AM, Martin Ågren <martin.agren@gmail.com> wrote:
>> It is apparently undefined behavior to call `regfree()` on a regex where
>> `regcomp()` failed. [...]
>>
>> diff --git a/diffcore-pickaxe.c b/diffcore-pickaxe.c
>> @@ -215,7 +215,6 @@ static void regcomp_or_die(regex_t *regex, const char *needle, int cflags)
>> /* The POSIX.2 people are surely sick */
>> char errbuf[1024];
>> regerror(err, regex, errbuf, 1024);
>> - regfree(regex);
>> die("invalid regex: %s", errbuf);
>
> While the commit message is very clear why we supposedly introduce a leak here,
> it is hard to be found from the source code (as we only delete code
> there, so digging
> for history is not obvious), so maybe
>
> /* regfree(regex) is invalid here */
>
> instead?
The commit message doesn't say that we are supposedly introducing a
leak (and, indeed, no resources should have been allocated to the
'regex' upon failed compile). It's saying that removing this call
potentially avoids a crash under some implementations.
Given that the very next line is die(), and that the function name has
"_or_die" in it, I'm not sure that an in-code comment about regfree()
being invalid upon failed compile would be all that helpful; indeed,
it could be confusing, causing the reader to wonder why that is
significant if we're just dying anyhow. I find that the patch, as is,
clarifies rather than muddles the situation.
^ permalink raw reply
* Re: OpenBMC Fix-It
From: Andrew Jeffery @ 2018-05-22 2:19 UTC (permalink / raw)
To: Nancy Yuen, OpenBMC Maillist
In-Reply-To: <CADfYTpFfoEe2SvvBAsjL-UAPocC02Z49o-rTDxA7JwA9OagHnw@mail.gmail.com>
On Wed, 9 May 2018, at 04:58, Nancy Yuen wrote:
> Please join my team for an OpenBMC community "fix-it" event in June!
>
> My team is devoting the week of 6/11/-15 to a Google OpenBMC "fix it" as
> part of a larger fix-it initiative. OpenBMC is a large part of our project
> so I'd like to spend part of the week on a fix-it on OpenBMC.
>
> I propose to have the fix it on Tues and Wed 6/12 & 6/13. We could set up
> an IRC channel for the fix it where everyone participating would hang out
> for the day. We could pick one or two areas to focus on for those days,
> put together a list of things to "fix" in those areas ahead of time. On
> the day, we all tackle things on the list (or something not on the list),
> discuss over IRC and do code reviews. Inevitably, people have meetings or
> things they can't get out of, but if you can be available for most of the
> day, that would be enough!
>
> Anyone interested in participating?
Count me in :)
^ permalink raw reply
* Re: [PATCH 2/2] cpan_build.bbclass: tell Module::Build the replacement
From: Khem Raj @ 2018-05-22 2:16 UTC (permalink / raw)
To: Jens Rehsack; +Cc: Patches and discussions about the oe-core layer
In-Reply-To: <F01F1AFA-0DE4-4153-A28B-04C5756825E8@gmail.com>
On Mon, May 21, 2018 at 11:49 AM, Jens Rehsack <rehsack@gmail.com> wrote:
> Instead of patching Module::Build, maybe Module::Build::Tiny and all other
> similar tools, use the official way to tell them which is the target perl
> on target.
>
> Signed-off-by: Jens Rehsack <sno@netbsd.org>
> ---
> meta/classes/cpan_build.bbclass | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/meta/classes/cpan_build.bbclass b/meta/classes/cpan_build.bbclass
> index fac074d610..c2491061fa 100644
> --- a/meta/classes/cpan_build.bbclass
> +++ b/meta/classes/cpan_build.bbclass
> @@ -30,7 +30,7 @@ cpan_build_do_configure () {
> }
>
> cpan_build_do_compile () {
> - perl Build verbose=1
> + perl Build --perl "/usr/bin/perl" verbose=1
perhaps using $[bindir} instead of hardcoding /usr/bin would be better here
> }
>
> cpan_build_do_install () {
> --
> Jens Rehsack - rehsack@gmail.com
>
>
> --
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.openembedded.org/mailman/listinfo/openembedded-core
>
^ permalink raw reply
* Re: nds32 build failures
From: Vincent Chen @ 2018-05-22 2:15 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Greentime Hu, Guenter Roeck, linux-kernel@vger.kernel.org,
Greentime Ying-Han Hu(?????????), Alec I-Wei Wu(?????????),
Chung-Ju Wu, Kito Huang-Jia Cheng(?????????), Vincent Chen
In-Reply-To: <CA+yXCZBqrz5Ftmen8wH5uBWGAKQ0cxPiK_nqKS6meUxXCPQ3Og@mail.gmail.com>
On Fri, May 11, 2018 at 01:17:05PM +0800, Kito Cheng wrote:
> Hi Arnd:
>
> I am GCC guy from Andes, we've missed the release schedule for GCC 8,
> we didn't upstream the Linux support on time.
>
> Our plan is put our GCC 8 on github and continue commit rest patches
> to upstream.
> And we'll put our source on github after our internal testing done.
>
> Thanks.
>
Dear Arnd:
The prebuilt nds32 toochain with gcc 8 is placed here
https://github.com/vincentzwc/prebuilt-nds32-toolchain/releases
The source code of each component for this toolchain is placed here.
a. gcc:
path: https://github.com/andestech/gcc.git
branch: nds32-8.1.0-upstream
b. binutils
path: https://github.com/andestech/binutils.git
branch: nds32-binutils-2.30-branch-open
c. glibc
path: https://github.com/andestech/glibc.git
branch: nds32-glibc-2.27-v0
d. Linux
path: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
branch: master
This toolchain also can be manually generated by the following script
https://github.com/andestech/build_script/blob/master/build_toolchain.sh
We successfully generate a bootable kernel image with nds32 defconfig by this
toolchain. However, we find a new compiler warning, Wstringop-overflow, when
building arch/nds32/kernel/vdso.o. We have sent a patch to fix it.
Best regards
Vincent
> On Fri, May 11, 2018 at 10:40 AM, Arnd Bergmann <arnd@arndb.de> wrote:
> > On Wed, Apr 18, 2018 at 3:19 AM, Greentime Hu <green.hu@gmail.com> wrote:
> >> 2018-04-17 20:47 GMT+08:00 Arnd Bergmann <arnd@arndb.de>:
> >>> On Mon, Apr 16, 2018 at 11:06 AM, Greentime Hu <green.hu@gmail.com> wrote:
> >>>> 2018-04-16 11:58 GMT+08:00 Guenter Roeck <private@roeck-us.net>:
> >>>>
> >>>> This built failure is because the toolchain version you used is not
> >>>> supported the latest intrinsic function/macro.
> >>>> We are sending the latest patchset now and we expect the whole new
> >>>> features will be supported in gcc8.0.0 and binutil2.31+.
> >>>>
> >>>> If you'd like to get these new features of toolchain, you may use the
> >>>> github version.
> >>>> This is the built-script repo. https://github.com/andestech/build_script.git
> >>>
> >>> I've taken the gcc-6.3 sources from there, and updated them to gcc-6.4.0
> >>> in order to build a nds32le-linux toolchain based on the same version as
> >>> the other ones.
> >>>
> >>> Unfortunately neither the usual binutils-2.29.1 nor your binutils worked
> >>> for me, but I eventually managed to get a build using the binutils-2.30
> >>> release.
> >>>
> >>> With this, I could build a mainline kernel with a couple of warnings,
> >>> but an 'allmodconfig' build still failed.
> >>>
> >>> Guenter, can you try my binary from
> >>> www.kernel.org/pub/tools/crosstool/files/bin/x86_64/6.4.0/x86_64-gcc-6.4.0-nolibc-nds32le-linux.tar.xz
> >>> ?
> >>>
> >>> If that works for you, I'll update the front-page and remove the nds32-elf
> >>> toolchains.
> >>>
> >>> Greentime, do you have a patch set for gcc-7.3 as well, or are 6.3 and 8.0 the
> >>> only working compilers for nds32le-linux?
> >>>
> >>
> >> Hi, all:
> >>
> >> I just discuss with our toolchain colleagues. We have only gcc6.3 and
> >> gcc8.0 for nds32le-linux.
> >> I have the ld segmentation fault issue too when building kernel with
> >> 'allmodconfig'. We are dealing with it.
> >
> > I've tried building the mainline gcc-8.1 sources for nds32le-linux and
> > still got a failure with those (building gcc), building a nds32le-elf gcc-8.1.0
> > worked fine, but that fails to build the vdso (no support for -fPIC), so
> > it's again unusable for building kernels. Any other ideas?
> >
> > Arnd
^ permalink raw reply
* Re: which files are "known to git"?
From: Junio C Hamano @ 2018-05-22 2:14 UTC (permalink / raw)
To: Jonathan Nieder; +Cc: Robert P. J. Day, Elijah Newren, Git Mailing list
In-Reply-To: <20180521175335.GC10623@aiede.svl.corp.google.com>
Jonathan Nieder <jrnieder@gmail.com> writes:
> My understanding was the same as Elijah's.
>
> I would be in favor of a patch that replaces the phrase "known to Git"
> in Git's documentation with something less confusing.
One possible twist I recall was that normally we only pay attention
to the index (i.e. the term "tracked files" means "paths shown in
ls-files (no args) output"), but there was a desire to take a union
of paths in the index and paths in the HEAD (the obvious difference
is those that are removed from the index), and we may have called
these "known to Git" in the discussion to distinguish them from
"paths in the index".
Clearly the phrase we are discussing (e.g. the ones used in "git
clean" documentation) has been used _without_ such a desire but
merely is used carelessly and confusingly. So I am all for finding
"known to Git" and replace them with "tracked" and/or "added to the
index" when the phrase is not used to mean "union of paths in the
index and in the HEAD".
Thanks.
^ permalink raw reply
* Re: [meta-openstack][PATCH] python-requests: remove PREFERRED_VERSION limit
From: Bruce Ashfield @ 2018-05-22 2:12 UTC (permalink / raw)
To: mingli.yu, mark.asselstine, yocto
In-Reply-To: <1526623601-452418-1-git-send-email-mingli.yu@windriver.com>
merged.
Bruce
On 2018-05-18 2:06 AM, mingli.yu@windriver.com wrote:
> From: Mingli Yu <Mingli.Yu@windriver.com>
>
> * Previously, add PREFERRED_VERSION for python-requests
> as we want to use version >=2.10.0 and the full commit
> message as below:
>
> commit 185eccef8964632f5b255265a0a8e59fe5858397
> Author: Mark Asselstine <mark.asselstine@windriver.com>
> Date: Fri Jan 20 16:59:31 2017 -0500
>
> python-requests: use version from meta-openembedded
>
> We want to use a version >=2.10.0 as required by python-keystoneauth1
> so set a PREF so we don't get the older version found in
> meta-virtualization and used by docker.
>
> Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
>
> * Now meta-oe upreved python-requests to 2.18.4, remove
> PREFERRED_VERSION limit to avoid bitbake messages like:
>
> "NOTE: preferred version 2.13.0 of python-requests not available"
>
> Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
> ---
> meta-openstack/conf/layer.conf | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/meta-openstack/conf/layer.conf b/meta-openstack/conf/layer.conf
> index 55df509..c376d58 100644
> --- a/meta-openstack/conf/layer.conf
> +++ b/meta-openstack/conf/layer.conf
> @@ -31,7 +31,6 @@ PREFERRED_VERSION_python-futures = "3.0.3%"
> PREFERRED_VERSION_python-django = "1.8.6"
> PREFERRED_VERSION_python-netaddr = "0.7.19"
> PREFERRED_VERSION_python-sqlalchemy = "1.0.16"
> -PREFERRED_VERSION_python-requests = "2.13.0"
> PREFERRED_VERSION_python-eventlet = "0.20.0"
> PREFERRED_VERSION_python-warlock = "1.2.0"
> PREFERRED_VERSION_python-jsonschema = "2.6.0"
>
^ permalink raw reply
* Re: [PATCH] ASoC: Intel: cht_bsw_nau8824: Fix jack_type to include SND_JACK_MICROPHONE
From: John Hsu @ 2018-05-22 2:12 UTC (permalink / raw)
To: Hans de Goede
Cc: alsa-devel, Takashi Iwai, Pierre-Louis Bossart, Liam Girdwood,
Mark Brown
In-Reply-To: <20180521124251.10535-1-hdegoede@redhat.com>
On 5/21/2018 8:42 PM, Hans de Goede wrote:
> The nau8824 codec can detect whether a headset or plain headphones is
> inserted (as well as button presses on the headset) as such the jack_type
> passed to snd_soc_card_jack_new() should include SND_JACK_MICROPHONE.
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> sound/soc/intel/boards/cht_bsw_nau8824.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/sound/soc/intel/boards/cht_bsw_nau8824.c b/sound/soc/intel/boards/cht_bsw_nau8824.c
> index 072e94b69e57..30c46977d53c 100644
> --- a/sound/soc/intel/boards/cht_bsw_nau8824.c
> +++ b/sound/soc/intel/boards/cht_bsw_nau8824.c
> @@ -120,7 +120,7 @@ static int cht_codec_init(struct snd_soc_pcm_runtime *runtime)
> * KEY_VOLUMEUP
> * KEY_VOLUMEDOWN
> */
> - jack_type = SND_JACK_HEADPHONE | SND_JACK_BTN_0 | SND_JACK_BTN_1 |
> + jack_type = SND_JACK_HEADSET | SND_JACK_BTN_0 | SND_JACK_BTN_1 |
> SND_JACK_BTN_2 | SND_JACK_BTN_3;
> ret = snd_soc_card_jack_new(runtime->card, "Headset", jack_type, jack,
> cht_bsw_jack_pins, ARRAY_SIZE(cht_bsw_jack_pins));
It's good for me.
===========================================================================================
The privileged confidential information contained in this email is intended for use only by the addressees as indicated by the original sender of this email. If you are not the addressee indicated in this email or are not responsible for delivery of the email to such a person, please kindly reply to the sender indicating this fact and delete all copies of it from your computer and network server immediately. Your cooperation is highly appreciated. It is advised that any unauthorized use of confidential information of Nuvoton is strictly prohibited; and any information in this email irrelevant to the official business of Nuvoton shall be deemed as neither given nor endorsed by Nuvoton.
^ permalink raw reply
* Re: [tpm2] tpm2-tss 2.0.0 release candidate
From: Philip Tricca @ 2018-05-22 2:12 UTC (permalink / raw)
To: tpm2
[-- Attachment #1: Type: text/plain, Size: 926 bytes --]
On Mon, May 21, 2018 at 04:04:13PM -0700, Philip Tricca wrote:
> On Fri, May 11, 2018 at 04:18:41PM -0700, Philip Tricca wrote:
> > Hello again,
> >
> > On Fri, May 04, 2018 at 03:44:15PM -0700, Philip Tricca wrote:
> > > The first release candidate for version 2.0.0 was just tagged. Please
> > > take whatever time you can spare to give it some testing.
> > > https://github.com/tpm2-software/tpm2-tss/releases/tag/2.0.0_rc0
> >
> > A few minor fixes during the RC0 window: specifically two fixes for issues
> > identified by static analysis / coverity. These were merged yesterday
> > and RC1 tagged today.
>
> During the RC1 window Tadeusz identified a number of issues one of which
> affected the public API. As a result RC2 was just tagged and we're
> kicking off another review window for the next week.
Forgot the link:
https://github.com/tpm2-software/tpm2-tss/releases/tag/2.0.0_rc2
Philip
^ permalink raw reply
* [PATCH V3] webkitgtk: Upgrade to 2.20.2
From: Khem Raj @ 2018-05-22 2:11 UTC (permalink / raw)
To: openembedded-core
Backport a patch to fix build
clang 6.0+ driver can correclty detect corss gold linker now
Signed-off-by: Khem Raj <raj.khem@gmail.com>
---
V2:
- Remove code to disable gold with clang instead of commenting, and describe why remove
V3:
- Mark patch status properly as backport
.../0012-soup-Forward-declare-URL-class.patch | 31 +++++++++++++++++++
...ebkitgtk_2.20.1.bb => webkitgtk_2.20.2.bb} | 6 ++--
2 files changed, 34 insertions(+), 3 deletions(-)
create mode 100644 meta/recipes-sato/webkit/webkitgtk/0012-soup-Forward-declare-URL-class.patch
rename meta/recipes-sato/webkit/{webkitgtk_2.20.1.bb => webkitgtk_2.20.2.bb} (96%)
diff --git a/meta/recipes-sato/webkit/webkitgtk/0012-soup-Forward-declare-URL-class.patch b/meta/recipes-sato/webkit/webkitgtk/0012-soup-Forward-declare-URL-class.patch
new file mode 100644
index 0000000000..78fd4dc79b
--- /dev/null
+++ b/meta/recipes-sato/webkit/webkitgtk/0012-soup-Forward-declare-URL-class.patch
@@ -0,0 +1,31 @@
+From 59f6903ad96f3213f248b672d5fd526cc0d666ce Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem@gmail.com>
+Date: Sun, 20 May 2018 14:28:27 -0700
+Subject: [PATCH] soup: Forward declare URL class
+
+This helps getting away with compiler errors seen with clang
+
+/mnt/a/oe/workspace/sources/webkitgtk/Source/WebCore/platform/network/soup/SoupNetworkSession.h:68:62:
+error: unknown type name 'URL'
+ static std::optional<ResourceError> checkTLSErrors(const URL&,
+GTlsCertificate*, GTlsCertificateFlags);
+ ^
+Upstream-Status: Backport [https://trac.webkit.org/changeset/231876/webkit]
+
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+---
+ Source/WebCore/platform/network/soup/SoupNetworkSession.h | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/Source/WebCore/platform/network/soup/SoupNetworkSession.h b/Source/WebCore/platform/network/soup/SoupNetworkSession.h
+index 03bd72ba..7ca8792d 100644
+--- a/Source/WebCore/platform/network/soup/SoupNetworkSession.h
++++ b/Source/WebCore/platform/network/soup/SoupNetworkSession.h
+@@ -43,6 +43,7 @@ namespace WebCore {
+
+ class CertificateInfo;
+ class ResourceError;
++class URL;
+ struct SoupNetworkProxySettings;
+
+ class SoupNetworkSession {
diff --git a/meta/recipes-sato/webkit/webkitgtk_2.20.1.bb b/meta/recipes-sato/webkit/webkitgtk_2.20.2.bb
similarity index 96%
rename from meta/recipes-sato/webkit/webkitgtk_2.20.1.bb
rename to meta/recipes-sato/webkit/webkitgtk_2.20.2.bb
index 360ab8e69b..a68a69f43c 100644
--- a/meta/recipes-sato/webkit/webkitgtk_2.20.1.bb
+++ b/meta/recipes-sato/webkit/webkitgtk_2.20.2.bb
@@ -21,10 +21,11 @@ SRC_URI = "http://www.webkitgtk.org/releases/${BPN}-${PV}.tar.xz \
file://0001-WebKitMacros-Append-to-I-and-not-to-isystem.patch \
file://0001-Fix-build-with-musl.patch \
file://detect-gstreamer-gl.patch \
+ file://0012-soup-Forward-declare-URL-class.patch \
"
-SRC_URI[md5sum] = "0cd9b9ae1f48c04de5314f77806eceb4"
-SRC_URI[sha256sum] = "43e43285fa4e393080cc4fbd5ad8644749a75b1e0b811b230b63ae56806c8959"
+SRC_URI[md5sum] = "3fdda40dc10eb2a00d5fba4219b83967"
+SRC_URI[sha256sum] = "dffe93a241f03f1c73b369f4e323e4d8f12e39d33d5515948cbf454ca4b526e2"
inherit cmake pkgconfig gobject-introspection perlnative distro_features_check upstream-version-is-even gtk-doc
@@ -85,7 +86,6 @@ EXTRA_OECMAKE_append_armv4 = " -DENABLE_JIT=OFF "
EXTRA_OECMAKE_append_aarch64 = " -DUSE_LD_GOLD=OFF "
EXTRA_OECMAKE_append_mipsarch = " -DUSE_LD_GOLD=OFF "
EXTRA_OECMAKE_append_powerpc = " -DUSE_LD_GOLD=OFF "
-EXTRA_OECMAKE_append_toolchain-clang = " -DUSE_LD_GOLD=OFF "
EXTRA_OECMAKE_append_aarch64 = " -DWTF_CPU_ARM64_CORTEXA53=ON"
--
2.17.0
^ permalink raw reply related
* Re: Why do we let munmap fail?
From: Matthew Wilcox @ 2018-05-22 2:11 UTC (permalink / raw)
To: Daniel Colascione; +Cc: tytso, dave.hansen, linux-mm, Tim Murray, Minchan Kim
In-Reply-To: <CAKOZuev5kMc88VOvwELv4aAwKB0n2x+uiSK8-XcNHstABcc=7w@mail.gmail.com>
On Mon, May 21, 2018 at 06:41:12PM -0700, Daniel Colascione wrote:
> On Mon, May 21, 2018 at 6:19 PM Theodore Y. Ts'o <tytso@mit.edu> wrote:
>
> > On Mon, May 21, 2018 at 05:38:06PM -0700, Daniel Colascione wrote:
> > >
> > > One approach to dealing with this badness, the one I proposed earlier,
> is
> > > to prevent that giant mmap from appearing in the first place (because
> we'd
> > > cap vsize). If that giant mmap never appears, you can't generate a huge
> VMA
> > > tree by splitting it.
> > >
> > > Maybe that's not a good approach. Maybe processes really need mappings
> that
> > > big. If they do, then maybe the right approach is to just make 8 billion
> > > VMAs not "DoS the system". What actually goes wrong if we just let the
> VMA
> > > tree grow that large? So what if VMA lookup ends up taking a while ---
> the
> > > process with the pathological allocation pattern is paying the cost,
> right?
> > >
>
> > Fine. Let's pick a more reasonable size --- say, 1GB. That's still
> > 2**18 4k pages. Someone who munmap's every other 4k page is going to
> > create 2**17 VMA's. That's a lot of VMA's. So now the question is do
> > we pre-preserve enough VMA's for this worst case scenario, for all
> > processes in the system? Or do we fail or otherwise kill the process
> > who is clearly attempting a DOS attack on the system?
>
> > If your goal is that munmap must ***never*** fail, then effectively
> > you have to preserve enough resources for 50% of all 4k pages in all
> > of the virtual address spaces in use by all of the processes in the
> > system. That's a horrible waste of resources, just to guarantee that
> > munmap(2) must never fail.
>
> To be clear, I'm not suggesting that we actually perform this
> preallocation. (Maybe in the distant future, with strict commit accounting,
> it'd be useful.) I'm just suggesting that we perform the accounting as if
> we did. But I think Matthew's convinced me that there's no vsize cap small
> enough to be safe and still large enough to be useful, so I'll retract the
> vsize cap idea.
>
> > Personally, I think it's not worth it.
>
> > Why is it so important to you that munmap(2) must not fail? Is it not
> > enough to say that if you mmap(2) a region, if you munmap(2) that
> > exact same size region as you mmap(2)'ed, it must not fail? That's a
> > much easier guarantee to make....
>
> That'd be good too, but I don't see how this guarantee would be easier to
> make. If you call mmap three times, those three allocations might end up
> merged into the same VMA, and if you called munmap on the middle
> allocation, you'd still have to split. Am I misunderstanding something?
What I think Ted's proposing (and I was too) is that we either preallocate
or make a note of how many VMAs we've merged. So you can unmap as many
times as you've mapped without risking failure. If you start unmapping
in the middle, then you might see munmap failures, but if you only unmap
things that you already mapped, we can guarantee that munmap won't fail.
^ permalink raw reply
* Re: [PATCH] LXC LICENSE is LGPLv2.1 not GPLv2.
From: Bruce Ashfield @ 2018-05-22 2:11 UTC (permalink / raw)
To: Dave Smith; +Cc: meta-virtualization
In-Reply-To: <20180521140701.51481-1-smithdm@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 1317 bytes --]
merged.
Bruce
On Mon, May 21, 2018 at 10:07 AM, Dave Smith <smithdm@gmail.com> wrote:
> From: David Smith <smithdm@gmail.com>
>
> LXC is licensed under LGPLv2.1 not GPLv2. The COPYING file
> referenced in the LXC recipe on all branches have the same content,
> checksum and all define LICENSE="GPLv2" rather than "LGPLv2.1".
> ---
> recipes-containers/lxc/lxc_2.0.8.bb | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/recipes-containers/lxc/lxc_2.0.8.bb b/recipes-containers/lxc/
> lxc_2.0.8.bb
> index c87b875..4918d91 100644
> --- a/recipes-containers/lxc/lxc_2.0.8.bb
> +++ b/recipes-containers/lxc/lxc_2.0.8.bb
> @@ -1,6 +1,6 @@
> DESCRIPTION = "lxc aims to use these new functionnalities to provide an
> userspace container object"
> SECTION = "console/utils"
> -LICENSE = "GPLv2"
> +LICENSE = "LGPLv2.1"
> LIC_FILES_CHKSUM = "file://COPYING;md5=4fbd65380cdd255951079008b364516c"
> DEPENDS = "libxml2 libcap"
> RDEPENDS_${PN} = " \
> --
> 2.17.0
>
> --
> _______________________________________________
> meta-virtualization mailing list
> meta-virtualization@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-virtualization
>
--
"Thou shalt not follow the NULL pointer, for chaos and madness await thee
at its end"
[-- Attachment #2: Type: text/html, Size: 2540 bytes --]
^ permalink raw reply
* Re: [m-c-s][PATCH] Add LAYERSERIES_COMPAT
From: Bruce Ashfield @ 2018-05-22 2:10 UTC (permalink / raw)
To: Jeremy Puhlman; +Cc: meta-virtualization
In-Reply-To: <1526931357-7652-1-git-send-email-jpuhlman@mvista.com>
[-- Attachment #1: Type: text/plain, Size: 6424 bytes --]
merged.
Bruce
On Mon, May 21, 2018 at 3:35 PM, Jeremy Puhlman <jpuhlman@mvista.com> wrote:
> From: "Jeremy A. Puhlman" <jpuhlman@mvista.com>
>
> Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com>
> ---
> conf/layer.conf | 1 +
> meta-openstack-aio-deploy/conf/layer.conf | 2 +-
> meta-openstack-compute-deploy/conf/layer.conf | 1 +
> meta-openstack-compute-test-config/conf/layer.conf | 1 +
> meta-openstack-controller-deploy/conf/layer.conf | 1 +
> meta-openstack-controller-test-config/conf/layer.conf | 1 +
> meta-openstack-qemu/conf/layer.conf | 1 +
> meta-openstack-swift-deploy/conf/layer.conf | 1 +
> meta-openstack/conf/layer.conf | 2 +-
> 9 files changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/conf/layer.conf b/conf/layer.conf
> index b30a99f..f69e8b1 100644
> --- a/conf/layer.conf
> +++ b/conf/layer.conf
> @@ -7,3 +7,4 @@ BBFILES += "${LAYERDIR}/recipes*/*/*.bb
> ${LAYERDIR}/recipes*/*/*.bbappend"
> BBFILE_COLLECTIONS += "cloud-services-layer"
> BBFILE_PATTERN_cloud-services-layer := "^${LAYERDIR}/"
> BBFILE_PRIORITY_cloud-services-layer = "5"
> +LAYERSERIES_COMPAT_cloud-services-layer = "sumo"
> diff --git a/meta-openstack-aio-deploy/conf/layer.conf
> b/meta-openstack-aio-deploy/conf/layer.conf
> index 154a98d..6d256c4 100644
> --- a/meta-openstack-aio-deploy/conf/layer.conf
> +++ b/meta-openstack-aio-deploy/conf/layer.conf
> @@ -7,4 +7,4 @@ BBFILES += "${LAYERDIR}/recipes*/*/*.bb
> ${LAYERDIR}/recipes*/*/*.bbappend"
> BBFILE_COLLECTIONS += "openstack-aio-deploy-layer"
> BBFILE_PATTERN_openstack-aio-deploy-layer := "^${LAYERDIR}/"
> BBFILE_PRIORITY_openstack-aio-deploy-layer = "6"
> -
> +LAYERSERIES_COMPAT_openstack-aio-deploy-layer = "sumo"
> diff --git a/meta-openstack-compute-deploy/conf/layer.conf
> b/meta-openstack-compute-deploy/conf/layer.conf
> index 44a035b..91a83e6 100644
> --- a/meta-openstack-compute-deploy/conf/layer.conf
> +++ b/meta-openstack-compute-deploy/conf/layer.conf
> @@ -7,3 +7,4 @@ BBFILES += "${LAYERDIR}/recipes*/*/*.bb
> ${LAYERDIR}/recipes*/*/*.bbappend"
> BBFILE_COLLECTIONS += "openstack-compute-deploy-layer"
> BBFILE_PATTERN_openstack-compute-deploy-layer := "^${LAYERDIR}/"
> BBFILE_PRIORITY_openstack-compute-deploy-layer = "6"
> +LAYERSERIES_COMPAT_openstack-compute-deploy-layer = "sumo"
> diff --git a/meta-openstack-compute-test-config/conf/layer.conf
> b/meta-openstack-compute-test-config/conf/layer.conf
> index f3b7bcb..bc070d8 100644
> --- a/meta-openstack-compute-test-config/conf/layer.conf
> +++ b/meta-openstack-compute-test-config/conf/layer.conf
> @@ -8,3 +8,4 @@ BBFILE_COLLECTIONS += "openstack-compute-test-
> config-layer"
> BBFILE_PATTERN_openstack-compute-test-config-layer := "^${LAYERDIR}/"
> # We want this layer to have higher priority than any other
> meta-openstack layers
> BBFILE_PRIORITY_openstack-compute-test-config-layer = "100"
> +LAYERSERIES_COMPAT_openstack-compute-test-config-layer = "sumo"
> diff --git a/meta-openstack-controller-deploy/conf/layer.conf
> b/meta-openstack-controller-deploy/conf/layer.conf
> index de8f435..a2c9d16 100644
> --- a/meta-openstack-controller-deploy/conf/layer.conf
> +++ b/meta-openstack-controller-deploy/conf/layer.conf
> @@ -7,3 +7,4 @@ BBFILES += "${LAYERDIR}/recipes*/*/*.bb
> ${LAYERDIR}/recipes*/*/*.bbappend"
> BBFILE_COLLECTIONS += "openstack-controller-deploy-layer"
> BBFILE_PATTERN_openstack-controller-deploy-layer := "^${LAYERDIR}/"
> BBFILE_PRIORITY_openstack-controller-deploy-layer = "6"
> +LAYERSERIES_COMPAT_openstack-controller-deploy-layer = "sumo"
> diff --git a/meta-openstack-controller-test-config/conf/layer.conf
> b/meta-openstack-controller-test-config/conf/layer.conf
> index 8a6cfcb..dcae15d 100644
> --- a/meta-openstack-controller-test-config/conf/layer.conf
> +++ b/meta-openstack-controller-test-config/conf/layer.conf
> @@ -8,3 +8,4 @@ BBFILE_COLLECTIONS += "openstack-controller-test-
> config-layer"
> BBFILE_PATTERN_openstack-controller-test-config-layer := "^${LAYERDIR}/"
> # We want this layer to have higher priority than any other
> meta-openstack layers
> BBFILE_PRIORITY_openstack-controller-test-config-layer = "100"
> +LAYERSERIES_COMPAT_openstack-controller-test-config-layer = "sumo"
> diff --git a/meta-openstack-qemu/conf/layer.conf
> b/meta-openstack-qemu/conf/layer.conf
> index 6761143..b6d45ba 100644
> --- a/meta-openstack-qemu/conf/layer.conf
> +++ b/meta-openstack-qemu/conf/layer.conf
> @@ -7,3 +7,4 @@ BBFILES += "${LAYERDIR}/recipes*/*/*.bb
> ${LAYERDIR}/recipes*/*/*.bbappend"
> BBFILE_COLLECTIONS += "openstack-qemu-layer"
> BBFILE_PATTERN_openstack-qemu-layer := "^${LAYERDIR}/"
> BBFILE_PRIORITY_openstack-qemu-layer = "6"
> +LAYERSERIES_COMPAT_openstack-qemu-layer = "sumo"
> diff --git a/meta-openstack-swift-deploy/conf/layer.conf
> b/meta-openstack-swift-deploy/conf/layer.conf
> index 45f9ee8..d021fcc 100644
> --- a/meta-openstack-swift-deploy/conf/layer.conf
> +++ b/meta-openstack-swift-deploy/conf/layer.conf
> @@ -7,3 +7,4 @@ BBFILES += "${LAYERDIR}/recipes*/*/*.bb
> ${LAYERDIR}/recipes*/*/*.bbappend"
> BBFILE_COLLECTIONS += "openstack-swift-deploy-layer"
> BBFILE_PATTERN_openstack-swift-deploy-layer := "^${LAYERDIR}/"
> BBFILE_PRIORITY_openstack-swift-deploy-layer = "6"
> +LAYERSERIES_COMPAT_openstack-swift-deploy-layer = "sumo"
> diff --git a/meta-openstack/conf/layer.conf b/meta-openstack/conf/layer.
> conf
> index 2565b92..f9443e2 100644
> --- a/meta-openstack/conf/layer.conf
> +++ b/meta-openstack/conf/layer.conf
> @@ -7,7 +7,7 @@ BBFILES += "${LAYERDIR}/recipes*/*/*.bb
> ${LAYERDIR}/recipes*/*/*.bbappend"
> BBFILE_COLLECTIONS += "openstack-layer"
> BBFILE_PATTERN_openstack-layer := "^${LAYERDIR}/"
> BBFILE_PRIORITY_openstack-layer = "5"
> -
> +LAYERSERIES_COMPAT_openstack-layer = "sumo"
> BB_DANGLINGAPPENDS_WARNONLY ?= "true"
>
> # pre 0.4.0 greenlet versions segfault python
> --
> 2.6.2
>
> --
> _______________________________________________
> meta-virtualization mailing list
> meta-virtualization@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-virtualization
>
--
"Thou shalt not follow the NULL pointer, for chaos and madness await thee
at its end"
[-- Attachment #2: Type: text/html, Size: 8309 bytes --]
^ permalink raw reply
* [PATCH] EDAC, ghes: Make platform-based whitelisting x86-only
From: Tyler Baicar @ 2018-05-22 2:10 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180521204439.GC14289@pd.tnic>
On 5/21/2018 4:44 PM, Borislav Petkov wrote:
> On Mon, May 21, 2018 at 04:34:11PM -0400, Tyler Baicar wrote:
>> Agreed. Sounds good to me.
> Meaning you're sending me a patch soon or ...?
>
> :-D
>
Yes, I'll put a patch together and send it out tomorrow.
--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.
^ permalink raw reply
* EDAC, ghes: Make platform-based whitelisting x86-only
From: Tyler Baicar @ 2018-05-22 2:10 UTC (permalink / raw)
To: Borislav Petkov
Cc: James Morse, Zhengqiang, mchehab, toshi.kani, linux-edac,
linuxarm, linux-arm-kernel@lists.infradead.org
On 5/21/2018 4:44 PM, Borislav Petkov wrote:
> On Mon, May 21, 2018 at 04:34:11PM -0400, Tyler Baicar wrote:
>> Agreed. Sounds good to me.
> Meaning you're sending me a patch soon or ...?
>
> :-D
>
Yes, I'll put a patch together and send it out tomorrow.
^ permalink raw reply
* Re: Why do we let munmap fail?
From: Daniel Colascione @ 2018-05-22 2:09 UTC (permalink / raw)
To: tytso; +Cc: willy, dave.hansen, linux-mm, Tim Murray, Minchan Kim
In-Reply-To: <CAKOZuev5kMc88VOvwELv4aAwKB0n2x+uiSK8-XcNHstABcc=7w@mail.gmail.com>
On Mon, May 21, 2018 at 6:41 PM Daniel Colascione <dancol@google.com> wrote:
> That'd be good too, but I don't see how this guarantee would be easier to
> make. If you call mmap three times, those three allocations might end up
> merged into the same VMA, and if you called munmap on the middle
> allocation, you'd still have to split. Am I misunderstanding something?
Oh: a sequence number stored in the VMA, combined with a refusal to merge
across sequence number differences.
^ permalink raw reply
* Re: [PATCH] xen: add xendriverdomain systemd unit to devd
From: Bruce Ashfield @ 2018-05-22 2:09 UTC (permalink / raw)
To: Chris Patterson; +Cc: meta-virtualization, Chris Patterson
In-Reply-To: <1526041972-30695-1-git-send-email-cjp256@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 1577 bytes --]
merged
Bruce
On Fri, May 11, 2018 at 8:32 AM, Chris Patterson <cjp256@gmail.com> wrote:
> From: Chris Patterson <pattersonc@ainfosec.com>
>
> Matches sysvinit packaging.
>
> Signed-off-by: Chris Patterson <pattersonc@ainfosec.com>
> ---
> recipes-extended/xen/xen.inc | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/recipes-extended/xen/xen.inc b/recipes-extended/xen/xen.inc
> index 8dfe589..cadbd78 100644
> --- a/recipes-extended/xen/xen.inc
> +++ b/recipes-extended/xen/xen.inc
> @@ -438,6 +438,7 @@ FILES_${PN}-cpuid = "\
>
> FILES_${PN}-devd = "\
> ${sysconfdir}/init.d/xendriverdomain \
> + ${systemd_unitdir}/system/xendriverdomain.service \
> "
>
> FILES_${PN}-flask = "\
> @@ -778,7 +779,8 @@ INITSCRIPT_NAME_${PN}-devd = "xendriverdomain"
> INITSCRIPT_PARAMS_${PN}-devd = "defaults 82"
>
> # systemd packages
> -SYSTEMD_PACKAGES = "${PN}-xen-watchdog ${PN}-xencommons ${PN}-xendomains"
> +SYSTEMD_PACKAGES = "${PN}-xen-watchdog ${PN}-xencommons ${PN}-xendomains
> ${PN}-devd"
> +SYSTEMD_SERVICE_${PN}-devd = "xendriverdomain.service"
> SYSTEMD_SERVICE_${PN}-xen-watchdog = "xen-watchdog.service"
> SYSTEMD_SERVICE_${PN}-xencommons = " \
> proc-xen.mount \
> --
> 2.1.4
>
> --
> _______________________________________________
> meta-virtualization mailing list
> meta-virtualization@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-virtualization
>
--
"Thou shalt not follow the NULL pointer, for chaos and madness await thee
at its end"
[-- Attachment #2: Type: text/html, Size: 2545 bytes --]
^ permalink raw reply
* Re: [PATCH v2 02/18] Add a new builtin: branch-diff
From: Junio C Hamano @ 2018-05-22 2:08 UTC (permalink / raw)
To: Jeff King
Cc: Brandon Williams, Stefan Beller, Johannes Schindelin,
Igor Djordjevic, Eric Sunshine, Git List, Thomas Rast,
Thomas Gummerer, Ævar Arnfjörð Bjarmason,
Ramsay Jones, Jacob Keller
In-Reply-To: <20180521215216.GB16623@sigill.intra.peff.net>
Jeff King <peff@peff.net> writes:
>> I haven't really been following all of the discussion but from what I
>> can tell the point of this command is to generate a diff based on two
>> different versions of a series, so why not call it 'series-diff'? :)
>
> That's OK with me, though I prefer "range" as I think we use that term
> elsewhere ("series" is usually part of "patch series", but many people
> do not use a workflow with that term).
FWIW, I am OK with either, with a bit of preference to "range" over
"series". As long as this stays to be an independent command (as
opposed to be made into a new mode to existing command) and the
command name is not overly hard to type, I am OK with anything ;-)
^ permalink raw reply
* [virtio-dev] [PATCH net-next v11 3/5] net: Introduce net_failover driver
From: Sridhar Samudrala @ 2018-05-22 2:06 UTC (permalink / raw)
To: mst, stephen, davem, netdev, virtualization, virtio-dev,
jesse.brandeburg, alexander.h.duyck, kubakici, sridhar.samudrala,
jasowang, loseweigh, jiri, aaron.f.brown, anjali.singhai
In-Reply-To: <1526954781-35359-1-git-send-email-sridhar.samudrala@intel.com>
The net_failover driver provides an automated failover mechanism via APIs
to create and destroy a failover master netdev and mananges a primary and
standby slave netdevs that get registered via the generic failover
infrastructure.
The failover netdev acts a master device and controls 2 slave devices. The
original paravirtual interface gets registered as 'standby' slave netdev and
a passthru/vf device with the same MAC gets registered as 'primary' slave
netdev. Both 'standby' and 'failover' netdevs are associated with the same
'pci' device. The user accesses the network interface via 'failover' netdev.
The 'failover' netdev chooses 'primary' netdev as default for transmits when
it is available with link up and running.
This can be used by paravirtual drivers to enable an alternate low latency
datapath. It also enables hypervisor controlled live migration of a VM with
direct attached VF by failing over to the paravirtual datapath when the VF
is unplugged.
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
---
Documentation/networking/net_failover.rst | 26 +
MAINTAINERS | 8 +
drivers/net/Kconfig | 12 +
drivers/net/Makefile | 1 +
drivers/net/net_failover.c | 836 ++++++++++++++++++++++++++++++
include/net/net_failover.h | 40 ++
6 files changed, 923 insertions(+)
create mode 100644 Documentation/networking/net_failover.rst
create mode 100644 drivers/net/net_failover.c
create mode 100644 include/net/net_failover.h
diff --git a/Documentation/networking/net_failover.rst b/Documentation/networking/net_failover.rst
new file mode 100644
index 000000000000..6764c3b1eec8
--- /dev/null
+++ b/Documentation/networking/net_failover.rst
@@ -0,0 +1,26 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============
+NET_FAILOVER
+============
+
+Overview
+========
+
+The net_failover driver provides an automated failover mechanism via APIs
+to create and destroy a failover master netdev and mananges a primary and
+standby slave netdevs that get registered via the generic failover
+infrastructrure.
+
+The failover netdev acts a master device and controls 2 slave devices. The
+original paravirtual interface is registered as 'standby' slave netdev and
+a passthru/vf device with the same MAC gets registered as 'primary' slave
+netdev. Both 'standby' and 'failover' netdevs are associated with the same
+'pci' device. The user accesses the network interface via 'failover' netdev.
+The 'failover' netdev chooses 'primary' netdev as default for transmits when
+it is available with link up and running.
+
+This can be used by paravirtual drivers to enable an alternate low latency
+datapath. It also enables hypervisor controlled live migration of a VM with
+direct attached VF by failing over to the paravirtual datapath when the VF
+is unplugged.
diff --git a/MAINTAINERS b/MAINTAINERS
index aed9575ddc53..ad172b1a7d57 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9642,6 +9642,14 @@ S: Maintained
F: Documentation/hwmon/nct6775
F: drivers/hwmon/nct6775.c
+NET_FAILOVER MODULE
+M: Sridhar Samudrala <sridhar.samudrala@intel.com>
+L: netdev@vger.kernel.org
+S: Supported
+F: driver/net/net_failover.c
+F: include/net/net_failover.h
+F: Documentation/networking/net_failover.rst
+
NETEFFECT IWARP RNIC DRIVER (IW_NES)
M: Faisal Latif <faisal.latif@intel.com>
L: linux-rdma@vger.kernel.org
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index a029b27fd002..1cf29c5ed510 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -510,4 +510,16 @@ config NETDEVSIM
To compile this driver as a module, choose M here: the module
will be called netdevsim.
+config NET_FAILOVER
+ tristate "Failover driver"
+ select FAILOVER
+ help
+ This provides an automated failover mechanism via APIs to create
+ and destroy a failover master netdev and manages a primary and
+ standby slave netdevs that get registered via the generic failover
+ infrastructure. This can be used by paravirtual drivers to enable
+ an alternate low latency datapath. It alsoenables live migration of
+ a VM with direct attached VF by failing over to the paravirtual
+ datapath when the VF is unplugged.
+
endif # NETDEVICES
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 91e67e375dd4..21cde7e78621 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -78,3 +78,4 @@ obj-$(CONFIG_FUJITSU_ES) += fjes/
thunderbolt-net-y += thunderbolt.o
obj-$(CONFIG_THUNDERBOLT_NET) += thunderbolt-net.o
obj-$(CONFIG_NETDEVSIM) += netdevsim/
+obj-$(CONFIG_NET_FAILOVER) += net_failover.o
diff --git a/drivers/net/net_failover.c b/drivers/net/net_failover.c
new file mode 100644
index 000000000000..ae47bdb363c9
--- /dev/null
+++ b/drivers/net/net_failover.c
@@ -0,0 +1,836 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2018, Intel Corporation. */
+
+/* This provides a net_failover interface for paravirtual drivers to
+ * provide an alternate datapath by exporting APIs to create and
+ * destroy a upper 'net_failover' netdev. The upper dev manages the
+ * original paravirtual interface as a 'standby' netdev and uses the
+ * generic failover infrastructure to register and manage a direct
+ * attached VF as a 'primary' netdev. This enables live migration of
+ * a VM with direct attached VF by failing over to the paravirtual
+ * datapath when the VF is unplugged.
+ *
+ * Some of the netdev management routines are based on bond/team driver as
+ * this driver provides active-backup functionality similar to those drivers.
+ */
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/netdevice.h>
+#include <linux/netpoll.h>
+#include <linux/rtnetlink.h>
+#include <linux/if_vlan.h>
+#include <linux/pci.h>
+#include <net/sch_generic.h>
+#include <uapi/linux/if_arp.h>
+#include <net/net_failover.h>
+
+static bool net_failover_xmit_ready(struct net_device *dev)
+{
+ return netif_running(dev) && netif_carrier_ok(dev);
+}
+
+static int net_failover_open(struct net_device *dev)
+{
+ struct net_failover_info *nfo_info = netdev_priv(dev);
+ struct net_device *primary_dev, *standby_dev;
+ int err;
+
+ primary_dev = rtnl_dereference(nfo_info->primary_dev);
+ if (primary_dev) {
+ err = dev_open(primary_dev);
+ if (err)
+ goto err_primary_open;
+ }
+
+ standby_dev = rtnl_dereference(nfo_info->standby_dev);
+ if (standby_dev) {
+ err = dev_open(standby_dev);
+ if (err)
+ goto err_standby_open;
+ }
+
+ if ((primary_dev && net_failover_xmit_ready(primary_dev)) ||
+ (standby_dev && net_failover_xmit_ready(standby_dev))) {
+ netif_carrier_on(dev);
+ netif_tx_wake_all_queues(dev);
+ }
+
+ return 0;
+
+err_standby_open:
+ dev_close(primary_dev);
+err_primary_open:
+ netif_tx_disable(dev);
+ return err;
+}
+
+static int net_failover_close(struct net_device *dev)
+{
+ struct net_failover_info *nfo_info = netdev_priv(dev);
+ struct net_device *slave_dev;
+
+ netif_tx_disable(dev);
+
+ slave_dev = rtnl_dereference(nfo_info->primary_dev);
+ if (slave_dev)
+ dev_close(slave_dev);
+
+ slave_dev = rtnl_dereference(nfo_info->standby_dev);
+ if (slave_dev)
+ dev_close(slave_dev);
+
+ return 0;
+}
+
+static netdev_tx_t net_failover_drop_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ atomic_long_inc(&dev->tx_dropped);
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+}
+
+static netdev_tx_t net_failover_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct net_failover_info *nfo_info = netdev_priv(dev);
+ struct net_device *xmit_dev;
+
+ /* Try xmit via primary netdev followed by standby netdev */
+ xmit_dev = rcu_dereference_bh(nfo_info->primary_dev);
+ if (!xmit_dev || !net_failover_xmit_ready(xmit_dev)) {
+ xmit_dev = rcu_dereference_bh(nfo_info->standby_dev);
+ if (!xmit_dev || !net_failover_xmit_ready(xmit_dev))
+ return net_failover_drop_xmit(skb, dev);
+ }
+
+ skb->dev = xmit_dev;
+ skb->queue_mapping = qdisc_skb_cb(skb)->slave_dev_queue_mapping;
+
+ return dev_queue_xmit(skb);
+}
+
+static u16 net_failover_select_queue(struct net_device *dev,
+ struct sk_buff *skb, void *accel_priv,
+ select_queue_fallback_t fallback)
+{
+ struct net_failover_info *nfo_info = netdev_priv(dev);
+ struct net_device *primary_dev;
+ u16 txq;
+
+ primary_dev = rcu_dereference(nfo_info->primary_dev);
+ if (primary_dev) {
+ const struct net_device_ops *ops = primary_dev->netdev_ops;
+
+ if (ops->ndo_select_queue)
+ txq = ops->ndo_select_queue(primary_dev, skb,
+ accel_priv, fallback);
+ else
+ txq = fallback(primary_dev, skb);
+
+ qdisc_skb_cb(skb)->slave_dev_queue_mapping = skb->queue_mapping;
+
+ return txq;
+ }
+
+ txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : 0;
+
+ /* Save the original txq to restore before passing to the driver */
+ qdisc_skb_cb(skb)->slave_dev_queue_mapping = skb->queue_mapping;
+
+ if (unlikely(txq >= dev->real_num_tx_queues)) {
+ do {
+ txq -= dev->real_num_tx_queues;
+ } while (txq >= dev->real_num_tx_queues);
+ }
+
+ return txq;
+}
+
+/* fold stats, assuming all rtnl_link_stats64 fields are u64, but
+ * that some drivers can provide 32bit values only.
+ */
+static void net_failover_fold_stats(struct rtnl_link_stats64 *_res,
+ const struct rtnl_link_stats64 *_new,
+ const struct rtnl_link_stats64 *_old)
+{
+ const u64 *new = (const u64 *)_new;
+ const u64 *old = (const u64 *)_old;
+ u64 *res = (u64 *)_res;
+ int i;
+
+ for (i = 0; i < sizeof(*_res) / sizeof(u64); i++) {
+ u64 nv = new[i];
+ u64 ov = old[i];
+ s64 delta = nv - ov;
+
+ /* detects if this particular field is 32bit only */
+ if (((nv | ov) >> 32) == 0)
+ delta = (s64)(s32)((u32)nv - (u32)ov);
+
+ /* filter anomalies, some drivers reset their stats
+ * at down/up events.
+ */
+ if (delta > 0)
+ res[i] += delta;
+ }
+}
+
+static void net_failover_get_stats(struct net_device *dev,
+ struct rtnl_link_stats64 *stats)
+{
+ struct net_failover_info *nfo_info = netdev_priv(dev);
+ const struct rtnl_link_stats64 *new;
+ struct rtnl_link_stats64 temp;
+ struct net_device *slave_dev;
+
+ spin_lock(&nfo_info->stats_lock);
+ memcpy(stats, &nfo_info->failover_stats, sizeof(*stats));
+
+ rcu_read_lock();
+
+ slave_dev = rcu_dereference(nfo_info->primary_dev);
+ if (slave_dev) {
+ new = dev_get_stats(slave_dev, &temp);
+ net_failover_fold_stats(stats, new, &nfo_info->primary_stats);
+ memcpy(&nfo_info->primary_stats, new, sizeof(*new));
+ }
+
+ slave_dev = rcu_dereference(nfo_info->standby_dev);
+ if (slave_dev) {
+ new = dev_get_stats(slave_dev, &temp);
+ net_failover_fold_stats(stats, new, &nfo_info->standby_stats);
+ memcpy(&nfo_info->standby_stats, new, sizeof(*new));
+ }
+
+ rcu_read_unlock();
+
+ memcpy(&nfo_info->failover_stats, stats, sizeof(*stats));
+ spin_unlock(&nfo_info->stats_lock);
+}
+
+static int net_failover_change_mtu(struct net_device *dev, int new_mtu)
+{
+ struct net_failover_info *nfo_info = netdev_priv(dev);
+ struct net_device *primary_dev, *standby_dev;
+ int ret = 0;
+
+ primary_dev = rcu_dereference(nfo_info->primary_dev);
+ if (primary_dev) {
+ ret = dev_set_mtu(primary_dev, new_mtu);
+ if (ret)
+ return ret;
+ }
+
+ standby_dev = rcu_dereference(nfo_info->standby_dev);
+ if (standby_dev) {
+ ret = dev_set_mtu(standby_dev, new_mtu);
+ if (ret) {
+ if (primary_dev)
+ dev_set_mtu(primary_dev, dev->mtu);
+ return ret;
+ }
+ }
+
+ dev->mtu = new_mtu;
+
+ return 0;
+}
+
+static void net_failover_set_rx_mode(struct net_device *dev)
+{
+ struct net_failover_info *nfo_info = netdev_priv(dev);
+ struct net_device *slave_dev;
+
+ rcu_read_lock();
+
+ slave_dev = rcu_dereference(nfo_info->primary_dev);
+ if (slave_dev) {
+ dev_uc_sync_multiple(slave_dev, dev);
+ dev_mc_sync_multiple(slave_dev, dev);
+ }
+
+ slave_dev = rcu_dereference(nfo_info->standby_dev);
+ if (slave_dev) {
+ dev_uc_sync_multiple(slave_dev, dev);
+ dev_mc_sync_multiple(slave_dev, dev);
+ }
+
+ rcu_read_unlock();
+}
+
+static int net_failover_vlan_rx_add_vid(struct net_device *dev, __be16 proto,
+ u16 vid)
+{
+ struct net_failover_info *nfo_info = netdev_priv(dev);
+ struct net_device *primary_dev, *standby_dev;
+ int ret = 0;
+
+ primary_dev = rcu_dereference(nfo_info->primary_dev);
+ if (primary_dev) {
+ ret = vlan_vid_add(primary_dev, proto, vid);
+ if (ret)
+ return ret;
+ }
+
+ standby_dev = rcu_dereference(nfo_info->standby_dev);
+ if (standby_dev) {
+ ret = vlan_vid_add(standby_dev, proto, vid);
+ if (ret)
+ if (primary_dev)
+ vlan_vid_del(primary_dev, proto, vid);
+ }
+
+ return ret;
+}
+
+static int net_failover_vlan_rx_kill_vid(struct net_device *dev, __be16 proto,
+ u16 vid)
+{
+ struct net_failover_info *nfo_info = netdev_priv(dev);
+ struct net_device *slave_dev;
+
+ slave_dev = rcu_dereference(nfo_info->primary_dev);
+ if (slave_dev)
+ vlan_vid_del(slave_dev, proto, vid);
+
+ slave_dev = rcu_dereference(nfo_info->standby_dev);
+ if (slave_dev)
+ vlan_vid_del(slave_dev, proto, vid);
+
+ return 0;
+}
+
+static const struct net_device_ops failover_dev_ops = {
+ .ndo_open = net_failover_open,
+ .ndo_stop = net_failover_close,
+ .ndo_start_xmit = net_failover_start_xmit,
+ .ndo_select_queue = net_failover_select_queue,
+ .ndo_get_stats64 = net_failover_get_stats,
+ .ndo_change_mtu = net_failover_change_mtu,
+ .ndo_set_rx_mode = net_failover_set_rx_mode,
+ .ndo_vlan_rx_add_vid = net_failover_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = net_failover_vlan_rx_kill_vid,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_features_check = passthru_features_check,
+};
+
+#define FAILOVER_NAME "net_failover"
+#define FAILOVER_VERSION "0.1"
+
+static void nfo_ethtool_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ strlcpy(drvinfo->driver, FAILOVER_NAME, sizeof(drvinfo->driver));
+ strlcpy(drvinfo->version, FAILOVER_VERSION, sizeof(drvinfo->version));
+}
+
+static int nfo_ethtool_get_link_ksettings(struct net_device *dev,
+ struct ethtool_link_ksettings *cmd)
+{
+ struct net_failover_info *nfo_info = netdev_priv(dev);
+ struct net_device *slave_dev;
+
+ slave_dev = rtnl_dereference(nfo_info->primary_dev);
+ if (!slave_dev || !net_failover_xmit_ready(slave_dev)) {
+ slave_dev = rtnl_dereference(nfo_info->standby_dev);
+ if (!slave_dev || !net_failover_xmit_ready(slave_dev)) {
+ cmd->base.duplex = DUPLEX_UNKNOWN;
+ cmd->base.port = PORT_OTHER;
+ cmd->base.speed = SPEED_UNKNOWN;
+
+ return 0;
+ }
+ }
+
+ return __ethtool_get_link_ksettings(slave_dev, cmd);
+}
+
+static const struct ethtool_ops failover_ethtool_ops = {
+ .get_drvinfo = nfo_ethtool_get_drvinfo,
+ .get_link = ethtool_op_get_link,
+ .get_link_ksettings = nfo_ethtool_get_link_ksettings,
+};
+
+/* Called when slave dev is injecting data into network stack.
+ * Change the associated network device from lower dev to failover dev.
+ * note: already called with rcu_read_lock
+ */
+static rx_handler_result_t net_failover_handle_frame(struct sk_buff **pskb)
+{
+ struct sk_buff *skb = *pskb;
+ struct net_device *dev = rcu_dereference(skb->dev->rx_handler_data);
+ struct net_failover_info *nfo_info = netdev_priv(dev);
+ struct net_device *primary_dev, *standby_dev;
+
+ primary_dev = rcu_dereference(nfo_info->primary_dev);
+ standby_dev = rcu_dereference(nfo_info->standby_dev);
+
+ if (primary_dev && skb->dev == standby_dev)
+ return RX_HANDLER_EXACT;
+
+ skb->dev = dev;
+
+ return RX_HANDLER_ANOTHER;
+}
+
+static void net_failover_compute_features(struct net_device *dev)
+{
+ u32 vlan_features = FAILOVER_VLAN_FEATURES & NETIF_F_ALL_FOR_ALL;
+ netdev_features_t enc_features = FAILOVER_ENC_FEATURES;
+ unsigned short max_hard_header_len = ETH_HLEN;
+ unsigned int dst_release_flag = IFF_XMIT_DST_RELEASE |
+ IFF_XMIT_DST_RELEASE_PERM;
+ struct net_failover_info *nfo_info = netdev_priv(dev);
+ struct net_device *primary_dev, *standby_dev;
+
+ primary_dev = rcu_dereference(nfo_info->primary_dev);
+ if (primary_dev) {
+ vlan_features =
+ netdev_increment_features(vlan_features,
+ primary_dev->vlan_features,
+ FAILOVER_VLAN_FEATURES);
+ enc_features =
+ netdev_increment_features(enc_features,
+ primary_dev->hw_enc_features,
+ FAILOVER_ENC_FEATURES);
+
+ dst_release_flag &= primary_dev->priv_flags;
+ if (primary_dev->hard_header_len > max_hard_header_len)
+ max_hard_header_len = primary_dev->hard_header_len;
+ }
+
+ standby_dev = rcu_dereference(nfo_info->standby_dev);
+ if (standby_dev) {
+ vlan_features =
+ netdev_increment_features(vlan_features,
+ standby_dev->vlan_features,
+ FAILOVER_VLAN_FEATURES);
+ enc_features =
+ netdev_increment_features(enc_features,
+ standby_dev->hw_enc_features,
+ FAILOVER_ENC_FEATURES);
+
+ dst_release_flag &= standby_dev->priv_flags;
+ if (standby_dev->hard_header_len > max_hard_header_len)
+ max_hard_header_len = standby_dev->hard_header_len;
+ }
+
+ dev->vlan_features = vlan_features;
+ dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL;
+ dev->hard_header_len = max_hard_header_len;
+
+ dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
+ if (dst_release_flag == (IFF_XMIT_DST_RELEASE |
+ IFF_XMIT_DST_RELEASE_PERM))
+ dev->priv_flags |= IFF_XMIT_DST_RELEASE;
+
+ netdev_change_features(dev);
+}
+
+static void net_failover_lower_state_changed(struct net_device *slave_dev,
+ struct net_device *primary_dev,
+ struct net_device *standby_dev)
+{
+ struct netdev_lag_lower_state_info info;
+
+ if (netif_carrier_ok(slave_dev))
+ info.link_up = true;
+ else
+ info.link_up = false;
+
+ if (slave_dev == primary_dev) {
+ if (netif_running(primary_dev))
+ info.tx_enabled = true;
+ else
+ info.tx_enabled = false;
+ } else {
+ if ((primary_dev && netif_running(primary_dev)) ||
+ (!netif_running(standby_dev)))
+ info.tx_enabled = false;
+ else
+ info.tx_enabled = true;
+ }
+
+ netdev_lower_state_changed(slave_dev, &info);
+}
+
+static int net_failover_slave_register(struct net_device *slave_dev,
+ struct net_device *failover_dev)
+{
+ struct net_device *standby_dev, *primary_dev;
+ struct netdev_lag_upper_info lag_upper_info;
+ struct net_failover_info *nfo_info;
+ bool slave_is_standby;
+ u32 orig_mtu;
+ int err;
+
+ nfo_info = netdev_priv(failover_dev);
+ standby_dev = rtnl_dereference(nfo_info->standby_dev);
+ primary_dev = rtnl_dereference(nfo_info->primary_dev);
+ slave_is_standby = slave_dev->dev.parent == failover_dev->dev.parent;
+ if (slave_is_standby ? standby_dev : primary_dev) {
+ netdev_err(failover_dev, "%s attempting to register as slave dev when %s already present\n",
+ slave_dev->name,
+ slave_is_standby ? "standby" : "primary");
+ goto done;
+ }
+
+ /* We want to allow only a direct attached VF device as a primary
+ * netdev. As there is no easy way to check for a VF device, restrict
+ * this to a pci device.
+ */
+ if (!slave_is_standby && (!slave_dev->dev.parent ||
+ !dev_is_pci(slave_dev->dev.parent)))
+ goto done;
+
+ if (failover_dev->features & NETIF_F_VLAN_CHALLENGED &&
+ vlan_uses_dev(failover_dev)) {
+ netdev_err(failover_dev, "Device %s is VLAN challenged and failover device has VLAN set up\n",
+ failover_dev->name);
+ goto done;
+ }
+
+ /* Align MTU of slave with failover dev */
+ orig_mtu = slave_dev->mtu;
+ err = dev_set_mtu(slave_dev, failover_dev->mtu);
+ if (err) {
+ netdev_err(failover_dev, "unable to change mtu of %s to %u register failed\n",
+ slave_dev->name, failover_dev->mtu);
+ goto done;
+ }
+
+ dev_hold(slave_dev);
+
+ if (netif_running(failover_dev)) {
+ err = dev_open(slave_dev);
+ if (err && (err != -EBUSY)) {
+ netdev_err(failover_dev, "Opening slave %s failed err:%d\n",
+ slave_dev->name, err);
+ goto err_dev_open;
+ }
+ }
+
+ netif_addr_lock_bh(failover_dev);
+ dev_uc_sync_multiple(slave_dev, failover_dev);
+ dev_uc_sync_multiple(slave_dev, failover_dev);
+ netif_addr_unlock_bh(failover_dev);
+
+ err = vlan_vids_add_by_dev(slave_dev, failover_dev);
+ if (err) {
+ netdev_err(failover_dev, "Failed to add vlan ids to device %s err:%d\n",
+ slave_dev->name, err);
+ goto err_vlan_add;
+ }
+
+ err = netdev_rx_handler_register(slave_dev, net_failover_handle_frame,
+ failover_dev);
+ if (err) {
+ netdev_err(slave_dev, "can not register failover rx handler (err = %d)\n",
+ err);
+ goto err_handler_register;
+ }
+
+ lag_upper_info.tx_type = NETDEV_LAG_TX_TYPE_ACTIVEBACKUP;
+ err = netdev_master_upper_dev_link(slave_dev, failover_dev, NULL,
+ &lag_upper_info, NULL);
+ if (err) {
+ netdev_err(slave_dev, "can not set failover device %s (err = %d)\n",
+ failover_dev->name, err);
+ goto err_upper_link;
+ }
+
+ slave_dev->priv_flags |= IFF_FAILOVER_SLAVE;
+
+ if (slave_is_standby) {
+ rcu_assign_pointer(nfo_info->standby_dev, slave_dev);
+ standby_dev = slave_dev;
+ dev_get_stats(standby_dev, &nfo_info->standby_stats);
+ } else {
+ rcu_assign_pointer(nfo_info->primary_dev, slave_dev);
+ primary_dev = slave_dev;
+ dev_get_stats(primary_dev, &nfo_info->primary_stats);
+ failover_dev->min_mtu = slave_dev->min_mtu;
+ failover_dev->max_mtu = slave_dev->max_mtu;
+ }
+
+ net_failover_lower_state_changed(slave_dev, primary_dev, standby_dev);
+ net_failover_compute_features(failover_dev);
+
+ call_netdevice_notifiers(NETDEV_JOIN, slave_dev);
+
+ netdev_info(failover_dev, "failover %s slave:%s registered\n",
+ slave_is_standby ? "standby" : "primary", slave_dev->name);
+
+ goto done;
+
+err_upper_link:
+ netdev_rx_handler_unregister(slave_dev);
+err_handler_register:
+ vlan_vids_del_by_dev(slave_dev, failover_dev);
+err_vlan_add:
+ dev_uc_unsync(slave_dev, failover_dev);
+ dev_mc_unsync(slave_dev, failover_dev);
+ dev_close(slave_dev);
+err_dev_open:
+ dev_put(slave_dev);
+ dev_set_mtu(slave_dev, orig_mtu);
+done:
+ return NOTIFY_DONE;
+}
+
+static int net_failover_slave_unregister(struct net_device *slave_dev,
+ struct net_device *failover_dev)
+{
+ struct net_device *standby_dev, *primary_dev;
+ struct net_failover_info *nfo_info;
+ bool slave_is_standby;
+
+ nfo_info = netdev_priv(failover_dev);
+ primary_dev = rtnl_dereference(nfo_info->primary_dev);
+ standby_dev = rtnl_dereference(nfo_info->standby_dev);
+
+ if (slave_dev != primary_dev && slave_dev != standby_dev)
+ goto done;
+
+ slave_is_standby = slave_dev->dev.parent == failover_dev->dev.parent;
+
+ netdev_rx_handler_unregister(slave_dev);
+ netdev_upper_dev_unlink(slave_dev, failover_dev);
+ vlan_vids_del_by_dev(slave_dev, failover_dev);
+ dev_uc_unsync(slave_dev, failover_dev);
+ dev_mc_unsync(slave_dev, failover_dev);
+ dev_close(slave_dev);
+ slave_dev->priv_flags &= ~IFF_FAILOVER_SLAVE;
+
+ nfo_info = netdev_priv(failover_dev);
+ dev_get_stats(failover_dev, &nfo_info->failover_stats);
+
+ if (slave_is_standby) {
+ RCU_INIT_POINTER(nfo_info->standby_dev, NULL);
+ } else {
+ RCU_INIT_POINTER(nfo_info->primary_dev, NULL);
+ if (standby_dev) {
+ failover_dev->min_mtu = standby_dev->min_mtu;
+ failover_dev->max_mtu = standby_dev->max_mtu;
+ }
+ }
+
+ dev_put(slave_dev);
+
+ net_failover_compute_features(failover_dev);
+
+ netdev_info(failover_dev, "failover %s slave:%s unregistered\n",
+ slave_is_standby ? "standby" : "primary", slave_dev->name);
+
+done:
+ return NOTIFY_DONE;
+}
+
+static int net_failover_slave_link_change(struct net_device *slave_dev,
+ struct net_device *failover_dev)
+{
+ struct net_device *primary_dev, *standby_dev;
+ struct net_failover_info *nfo_info;
+
+ nfo_info = netdev_priv(failover_dev);
+
+ primary_dev = rtnl_dereference(nfo_info->primary_dev);
+ standby_dev = rtnl_dereference(nfo_info->standby_dev);
+
+ if (slave_dev != primary_dev && slave_dev != standby_dev)
+ goto done;
+
+ if ((primary_dev && net_failover_xmit_ready(primary_dev)) ||
+ (standby_dev && net_failover_xmit_ready(standby_dev))) {
+ netif_carrier_on(failover_dev);
+ netif_tx_wake_all_queues(failover_dev);
+ } else {
+ dev_get_stats(failover_dev, &nfo_info->failover_stats);
+ netif_carrier_off(failover_dev);
+ netif_tx_stop_all_queues(failover_dev);
+ }
+
+ net_failover_lower_state_changed(slave_dev, primary_dev, standby_dev);
+
+done:
+ return NOTIFY_DONE;
+}
+
+static int net_failover_slave_name_change(struct net_device *slave_dev,
+ struct net_device *failover_dev)
+{
+ struct net_device *primary_dev, *standby_dev;
+ struct net_failover_info *nfo_info;
+
+ nfo_info = netdev_priv(failover_dev);
+
+ primary_dev = rtnl_dereference(nfo_info->primary_dev);
+ standby_dev = rtnl_dereference(nfo_info->standby_dev);
+
+ if (slave_dev != primary_dev && slave_dev != standby_dev)
+ goto done;
+
+ /* We need to bring up the slave after the rename by udev in case
+ * open failed with EBUSY when it was registered.
+ */
+ dev_open(slave_dev);
+
+done:
+ return NOTIFY_DONE;
+}
+
+static struct failover_ops net_failover_ops = {
+ .slave_register = net_failover_slave_register,
+ .slave_unregister = net_failover_slave_unregister,
+ .slave_link_change = net_failover_slave_link_change,
+ .slave_name_change = net_failover_slave_name_change,
+};
+
+/**
+ * net_failover_create - Create and register a failover instance
+ *
+ * @dev: standby netdev
+ *
+ * Creates a failover netdev and registers a failover instance for a standby
+ * netdev. Used by paravirtual drivers that use 3-netdev model.
+ * The failover netdev acts as a master device and controls 2 slave devices -
+ * the original standby netdev and a VF netdev with the same MAC gets
+ * registered as primary netdev.
+ *
+ * Return: pointer to failover instance
+ */
+struct failover *net_failover_create(struct net_device *standby_dev)
+{
+ struct device *dev = standby_dev->dev.parent;
+ struct net_device *failover_dev;
+ struct failover *failover;
+ int err;
+
+ /* Alloc at least 2 queues, for now we are going with 16 assuming
+ * that VF devices being enslaved won't have too many queues.
+ */
+ failover_dev = alloc_etherdev_mq(sizeof(struct net_failover_info), 16);
+ if (!failover_dev) {
+ dev_err(dev, "Unable to allocate failover_netdev!\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ dev_net_set(failover_dev, dev_net(standby_dev));
+ SET_NETDEV_DEV(failover_dev, dev);
+
+ failover_dev->netdev_ops = &failover_dev_ops;
+ failover_dev->ethtool_ops = &failover_ethtool_ops;
+
+ /* Initialize the device options */
+ failover_dev->priv_flags |= IFF_UNICAST_FLT | IFF_NO_QUEUE;
+ failover_dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE |
+ IFF_TX_SKB_SHARING);
+
+ /* don't acquire failover netdev's netif_tx_lock when transmitting */
+ failover_dev->features |= NETIF_F_LLTX;
+
+ /* Don't allow failover devices to change network namespaces. */
+ failover_dev->features |= NETIF_F_NETNS_LOCAL;
+
+ failover_dev->hw_features = FAILOVER_VLAN_FEATURES |
+ NETIF_F_HW_VLAN_CTAG_TX |
+ NETIF_F_HW_VLAN_CTAG_RX |
+ NETIF_F_HW_VLAN_CTAG_FILTER;
+
+ failover_dev->hw_features |= NETIF_F_GSO_ENCAP_ALL;
+ failover_dev->features |= failover_dev->hw_features;
+
+ memcpy(failover_dev->dev_addr, standby_dev->dev_addr,
+ failover_dev->addr_len);
+
+ failover_dev->min_mtu = standby_dev->min_mtu;
+ failover_dev->max_mtu = standby_dev->max_mtu;
+
+ err = register_netdev(failover_dev);
+ if (err) {
+ dev_err(dev, "Unable to register failover_dev!\n");
+ goto err_register_netdev;
+ }
+
+ netif_carrier_off(failover_dev);
+
+ failover = failover_register(failover_dev, &net_failover_ops);
+ if (IS_ERR(failover))
+ goto err_failover_register;
+
+ return failover;
+
+err_failover_register:
+ unregister_netdev(failover_dev);
+err_register_netdev:
+ free_netdev(failover_dev);
+
+ return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(net_failover_create);
+
+/**
+ * net_failover_destroy - Destroy a failover instance
+ *
+ * @failover: pointer to failover instance
+ *
+ * Unregisters any slave netdevs associated with the failover instance by
+ * calling failover_slave_unregister().
+ * unregisters the failover instance itself and finally frees the failover
+ * netdev. Used by paravirtual drivers that use 3-netdev model.
+ *
+ */
+void net_failover_destroy(struct failover *failover)
+{
+ struct net_failover_info *nfo_info;
+ struct net_device *failover_dev;
+ struct net_device *slave_dev;
+
+ if (!failover)
+ return;
+
+ failover_dev = rcu_dereference(failover->failover_dev);
+ nfo_info = netdev_priv(failover_dev);
+
+ netif_device_detach(failover_dev);
+
+ rtnl_lock();
+
+ slave_dev = rtnl_dereference(nfo_info->primary_dev);
+ if (slave_dev)
+ failover_slave_unregister(slave_dev);
+
+ slave_dev = rtnl_dereference(nfo_info->standby_dev);
+ if (slave_dev)
+ failover_slave_unregister(slave_dev);
+
+ failover_unregister(failover);
+
+ unregister_netdevice(failover_dev);
+
+ rtnl_unlock();
+
+ free_netdev(failover_dev);
+}
+EXPORT_SYMBOL_GPL(net_failover_destroy);
+
+static __init int
+net_failover_init(void)
+{
+ return 0;
+}
+module_init(net_failover_init);
+
+static __exit
+void net_failover_exit(void)
+{
+}
+module_exit(net_failover_exit);
+
+MODULE_DESCRIPTION("Failover driver for Paravirtual drivers");
+MODULE_LICENSE("GPL v2");
diff --git a/include/net/net_failover.h b/include/net/net_failover.h
new file mode 100644
index 000000000000..b12a1c469d1c
--- /dev/null
+++ b/include/net/net_failover.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2018, Intel Corporation. */
+
+#ifndef _NET_FAILOVER_H
+#define _NET_FAILOVER_H
+
+#include <net/failover.h>
+
+/* failover state */
+struct net_failover_info {
+ /* primary netdev with same MAC */
+ struct net_device __rcu *primary_dev;
+
+ /* standby netdev */
+ struct net_device __rcu *standby_dev;
+
+ /* primary netdev stats */
+ struct rtnl_link_stats64 primary_stats;
+
+ /* standby netdev stats */
+ struct rtnl_link_stats64 standby_stats;
+
+ /* aggregated stats */
+ struct rtnl_link_stats64 failover_stats;
+
+ /* spinlock while updating stats */
+ spinlock_t stats_lock;
+};
+
+struct failover *net_failover_create(struct net_device *standby_dev);
+void net_failover_destroy(struct failover *failover);
+
+#define FAILOVER_VLAN_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \
+ NETIF_F_FRAGLIST | NETIF_F_ALL_TSO | \
+ NETIF_F_HIGHDMA | NETIF_F_LRO)
+
+#define FAILOVER_ENC_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \
+ NETIF_F_RXCSUM | NETIF_F_ALL_TSO)
+
+#endif /* _NET_FAILOVER_H */
--
2.14.3
---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org
^ permalink raw reply related
* [virtio-dev] [PATCH net-next v11 2/5] netvsc: refactor notifier/event handling code to use the failover framework
From: Sridhar Samudrala @ 2018-05-22 2:06 UTC (permalink / raw)
To: mst, stephen, davem, netdev, virtualization, virtio-dev,
jesse.brandeburg, alexander.h.duyck, kubakici, sridhar.samudrala,
jasowang, loseweigh, jiri, aaron.f.brown, anjali.singhai
In-Reply-To: <1526954781-35359-1-git-send-email-sridhar.samudrala@intel.com>
Use the registration/notification framework supported by the generic
failover infrastructure.
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
---
drivers/net/hyperv/Kconfig | 1 +
drivers/net/hyperv/hyperv_net.h | 2 +
drivers/net/hyperv/netvsc_drv.c | 133 +++++++---------------------------------
3 files changed, 25 insertions(+), 111 deletions(-)
diff --git a/drivers/net/hyperv/Kconfig b/drivers/net/hyperv/Kconfig
index 0765d5f61714..23a2d145813a 100644
--- a/drivers/net/hyperv/Kconfig
+++ b/drivers/net/hyperv/Kconfig
@@ -2,5 +2,6 @@ config HYPERV_NET
tristate "Microsoft Hyper-V virtual network driver"
depends on HYPERV
select UCS2_STRING
+ select FAILOVER
help
Select this option to enable the Hyper-V virtual network driver.
diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h
index 1be34d2e3563..99d8e7398a5b 100644
--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -932,6 +932,8 @@ struct net_device_context {
u32 vf_alloc;
/* Serial number of the VF to team with */
u32 vf_serial;
+
+ struct failover *failover;
};
/* Per channel data */
diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index da07ccdf84bf..6c77a81b7266 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -43,6 +43,7 @@
#include <net/pkt_sched.h>
#include <net/checksum.h>
#include <net/ip6_checksum.h>
+#include <net/failover.h>
#include "hyperv_net.h"
@@ -1763,46 +1764,6 @@ static void netvsc_link_change(struct work_struct *w)
rtnl_unlock();
}
-static struct net_device *get_netvsc_bymac(const u8 *mac)
-{
- struct net_device *dev;
-
- ASSERT_RTNL();
-
- for_each_netdev(&init_net, dev) {
- if (dev->netdev_ops != &device_ops)
- continue; /* not a netvsc device */
-
- if (ether_addr_equal(mac, dev->perm_addr))
- return dev;
- }
-
- return NULL;
-}
-
-static struct net_device *get_netvsc_byref(struct net_device *vf_netdev)
-{
- struct net_device *dev;
-
- ASSERT_RTNL();
-
- for_each_netdev(&init_net, dev) {
- struct net_device_context *net_device_ctx;
-
- if (dev->netdev_ops != &device_ops)
- continue; /* not a netvsc device */
-
- net_device_ctx = netdev_priv(dev);
- if (!rtnl_dereference(net_device_ctx->nvdev))
- continue; /* device is removed */
-
- if (rtnl_dereference(net_device_ctx->vf_netdev) == vf_netdev)
- return dev; /* a match */
- }
-
- return NULL;
-}
-
/* Called when VF is injecting data into network stack.
* Change the associated network device from VF to netvsc.
* note: already called with rcu_read_lock
@@ -1915,24 +1876,15 @@ static void netvsc_vf_setup(struct work_struct *w)
rtnl_unlock();
}
-static int netvsc_register_vf(struct net_device *vf_netdev)
+static int netvsc_register_vf(struct net_device *vf_netdev,
+ struct net_device *ndev)
{
- struct net_device *ndev;
struct net_device_context *net_device_ctx;
struct netvsc_device *netvsc_dev;
if (vf_netdev->addr_len != ETH_ALEN)
return NOTIFY_DONE;
- /*
- * We will use the MAC address to locate the synthetic interface to
- * associate with the VF interface. If we don't find a matching
- * synthetic interface, move on.
- */
- ndev = get_netvsc_bymac(vf_netdev->perm_addr);
- if (!ndev)
- return NOTIFY_DONE;
-
net_device_ctx = netdev_priv(ndev);
netvsc_dev = rtnl_dereference(net_device_ctx->nvdev);
if (!netvsc_dev || rtnl_dereference(net_device_ctx->vf_netdev))
@@ -1949,17 +1901,13 @@ static int netvsc_register_vf(struct net_device *vf_netdev)
}
/* VF up/down change detected, schedule to change data path */
-static int netvsc_vf_changed(struct net_device *vf_netdev)
+static int netvsc_vf_changed(struct net_device *vf_netdev,
+ struct net_device *ndev)
{
struct net_device_context *net_device_ctx;
struct netvsc_device *netvsc_dev;
- struct net_device *ndev;
bool vf_is_up = netif_running(vf_netdev);
- ndev = get_netvsc_byref(vf_netdev);
- if (!ndev)
- return NOTIFY_DONE;
-
net_device_ctx = netdev_priv(ndev);
netvsc_dev = rtnl_dereference(net_device_ctx->nvdev);
if (!netvsc_dev)
@@ -1972,15 +1920,11 @@ static int netvsc_vf_changed(struct net_device *vf_netdev)
return NOTIFY_OK;
}
-static int netvsc_unregister_vf(struct net_device *vf_netdev)
+static int netvsc_unregister_vf(struct net_device *vf_netdev,
+ struct net_device *ndev)
{
- struct net_device *ndev;
struct net_device_context *net_device_ctx;
- ndev = get_netvsc_byref(vf_netdev);
- if (!ndev)
- return NOTIFY_DONE;
-
net_device_ctx = netdev_priv(ndev);
cancel_delayed_work_sync(&net_device_ctx->vf_takeover);
@@ -1994,6 +1938,12 @@ static int netvsc_unregister_vf(struct net_device *vf_netdev)
return NOTIFY_OK;
}
+static struct failover_ops netvsc_failover_ops = {
+ .slave_register = netvsc_register_vf,
+ .slave_unregister = netvsc_unregister_vf,
+ .slave_link_change = netvsc_vf_changed,
+};
+
static int netvsc_probe(struct hv_device *dev,
const struct hv_vmbus_device_id *dev_id)
{
@@ -2083,8 +2033,14 @@ static int netvsc_probe(struct hv_device *dev,
goto register_failed;
}
+ net_device_ctx->failover = failover_register(net, &netvsc_failover_ops);
+ if (IS_ERR(net_device_ctx->failover))
+ goto err_failover;
+
return ret;
+err_failover:
+ unregister_netdev(net);
register_failed:
rndis_filter_device_remove(dev, nvdev);
rndis_failed:
@@ -2125,13 +2081,15 @@ static int netvsc_remove(struct hv_device *dev)
rtnl_lock();
vf_netdev = rtnl_dereference(ndev_ctx->vf_netdev);
if (vf_netdev)
- netvsc_unregister_vf(vf_netdev);
+ failover_slave_unregister(vf_netdev);
if (nvdev)
rndis_filter_device_remove(dev, nvdev);
unregister_netdevice(net);
+ failover_unregister(ndev_ctx->failover);
+
rtnl_unlock();
rcu_read_unlock();
@@ -2158,54 +2116,8 @@ static struct hv_driver netvsc_drv = {
.remove = netvsc_remove,
};
-/*
- * On Hyper-V, every VF interface is matched with a corresponding
- * synthetic interface. The synthetic interface is presented first
- * to the guest. When the corresponding VF instance is registered,
- * we will take care of switching the data path.
- */
-static int netvsc_netdev_event(struct notifier_block *this,
- unsigned long event, void *ptr)
-{
- struct net_device *event_dev = netdev_notifier_info_to_dev(ptr);
-
- /* Skip our own events */
- if (event_dev->netdev_ops == &device_ops)
- return NOTIFY_DONE;
-
- /* Avoid non-Ethernet type devices */
- if (event_dev->type != ARPHRD_ETHER)
- return NOTIFY_DONE;
-
- /* Avoid Vlan dev with same MAC registering as VF */
- if (is_vlan_dev(event_dev))
- return NOTIFY_DONE;
-
- /* Avoid Bonding master dev with same MAC registering as VF */
- if ((event_dev->priv_flags & IFF_BONDING) &&
- (event_dev->flags & IFF_MASTER))
- return NOTIFY_DONE;
-
- switch (event) {
- case NETDEV_REGISTER:
- return netvsc_register_vf(event_dev);
- case NETDEV_UNREGISTER:
- return netvsc_unregister_vf(event_dev);
- case NETDEV_UP:
- case NETDEV_DOWN:
- return netvsc_vf_changed(event_dev);
- default:
- return NOTIFY_DONE;
- }
-}
-
-static struct notifier_block netvsc_netdev_notifier = {
- .notifier_call = netvsc_netdev_event,
-};
-
static void __exit netvsc_drv_exit(void)
{
- unregister_netdevice_notifier(&netvsc_netdev_notifier);
vmbus_driver_unregister(&netvsc_drv);
}
@@ -2225,7 +2137,6 @@ static int __init netvsc_drv_init(void)
if (ret)
return ret;
- register_netdevice_notifier(&netvsc_netdev_notifier);
return 0;
}
--
2.14.3
---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org
^ permalink raw reply related
* [virtio-dev] [PATCH net-next v11 0/5] Enable virtio_net to act as a standby for a passthru device
From: Sridhar Samudrala @ 2018-05-22 2:06 UTC (permalink / raw)
To: mst, stephen, davem, netdev, virtualization, virtio-dev,
jesse.brandeburg, alexander.h.duyck, kubakici, sridhar.samudrala,
jasowang, loseweigh, jiri, aaron.f.brown, anjali.singhai
The main motivation for this patch is to enable cloud service providers
to provide an accelerated datapath to virtio-net enabled VMs in a
transparent manner with no/minimal guest userspace changes. This also
enables hypervisor controlled live migration to be supported with VMs that
have direct attached SR-IOV VF devices.
Patch 1 introduces a failover module that provides a generic interface for
paravirtual drivers to listen for netdev register/unregister/link change
events from pci ethernet devices with the same MAC and takeover their
datapath. The notifier and event handling code is based on the existing
netvsc implementation.
Patch 2 refactors netvsc to use the registration/notification framework
introduced by failover module.
Patch 3 introduces a net_failover driver that provides an automated
failover mechanism to paravirtual drivers via APIs to create and destroy
a failover master netdev and mananges a primary and standby slave netdevs
that get registered via the generic failover infrastructure.
Patch 4 introduces a new feature bit VIRTIO_NET_F_STANDBY to virtio-net
that can be used by hypervisor to indicate that virtio_net interface
should act as a standby for another device with the same MAC address.
Patch 5 extends virtio_net to use alternate datapath when available and
registered. When STANDBY feature is enabled, virtio_net driver uese the
net_failover API to create an additional 'failover' netdev that acts as
a master device and controls 2 slave devices. The original virtio_net
netdev is registered as 'standby' netdev and a passthru/vf device with
the same MAC gets registered as 'primary' netdev. Both 'standby' and
'failover' netdevs are associated with the same 'pci' device. The user
accesses the network interface via 'failover' netdev. The 'failover'
netdev chooses 'primary' netdev as default for transmits when it is
available with link up and running.
As this patch series is initially focusing on usecases where hypervisor
fully controls the VM networking and the guest is not expected to directly
configure any hardware settings, it doesn't expose all the ndo/ethtool ops
that are supported by virtio_net at this time. To support additional usecases,
it should be possible to enable additional ops later by caching the state
in failover netdev and replaying when the 'primary' netdev gets registered.
At the time of live migration, the hypervisor needs to unplug the VF device
from the guest on the source host and reset the MAC filter of the VF to
initiate failover of datapath to virtio before starting the migration. After
the migration is completed, the destination hypervisor sets the MAC filter
on the VF and plugs it back to the guest to switch over to VF datapath.
This patch is based on the discussion initiated by Jesse on this thread.
https://marc.info/?l=linux-virtualization&m=151189725224231&w=2
v11:
- Tested live migration with virtio-net/AVF(i40evf) configured in failover
mode while running iperf in background. Tried static ip and dhcp
configurations using 'network' scripts and Network Manager.
- Build tested netvsc module.
Updates:
- Split net_failover module into 2 components.
1. 'failover' module that provides generic failover infrastructure
to register a failover instance and listen for slave events.
2. 'net_failover' driver that provides APIs to create/destroy upper
netdev and supports 3-netdev model used by virtio-net.
- Added documentation
v10:
- Tested live migration with virtio-net/AVF(i40evf) configured in failover
mode while running iperf in background. Tried static ip and dhcp
configurations using 'network' scripts and Network Manager.
- To avoid dhcp requests to be sent over the lower 'standby' and 'primary'
netdevs, ifcfg-xxx scripts for the lower devices can be created.
- Build tested netvsc module.
Updates:
- fix net_failover_open() to update failover CARRIER correctly based on
standby and primary states.
- fix net_failover_handle_frame() to handle frames received on standby
when primary is present.
- replace netdev_upper_dev_link with netdev_master_upper_dev_link and
handle lower dev state changes.
- fix net_failver_create() and net_failover_register() interfaces to
use ERR_PTR and avoid arg **
- disable setting mac address when virtio-net in STANDBY mode
- document exported symbols
- added entry to MAINTAINERS file
v9:
Select NET_FAILOVER automatically when VIRTIO_NET/HYPERV_NET
are enabled. (stephen)
v8:
- Made the failover managment routines more robust by updating the feature
bits/other fields in the failover netdev when slave netdevs are
registered/unregistered. (mst)
- added support for handling vlans.
- Limited the changes in netvsc to only use the notifier/event/lookups
from the failover module. The slave register/unregister/link-change
handlers are only updated to use the getbymac routine to get the
upper netdev. There is no change in their functionality. (stephen)
- renamed structs/function/file names to use net_failover prefix. (mst)
v7
- Rename 'bypass/active/backup' terminology with 'failover/primary/standy'
(jiri, mst)
- re-arranged dev_open() and dev_set_mtu() calls in the register routines
so that they don't get called for 2-netdev model. (stephen)
- fixed select_queue() routine to do queue selection based on VF if it is
registered as primary. (stephen)
- minor bugfixes
v6 RFC:
Simplified virtio_net changes by moving all the ndo_ops of the
bypass_netdev and create/destroy of bypass_netdev to 'bypass' module.
avoided 2 phase registration(driver + instances).
introduced IFF_BYPASS/IFF_BYPASS_SLAVE dev->priv_flags
replaced mutex with a spinlock
v5 RFC:
Based on Jiri's comments, moved the common functionality to a 'bypass'
module so that the same notifier and event handlers to handle child
register/unregister/link change events can be shared between virtio_net
and netvsc.
Improved error handling based on Siwei's comments.
v4:
- Based on the review comments on the v3 version of the RFC patch and
Jakub's suggestion for the naming issue with 3 netdev solution,
proposed 3 netdev in-driver bonding solution for virtio-net.
v3 RFC:
- Introduced 3 netdev model and pointed out a couple of issues with
that model and proposed 2 netdev model to avoid these issues.
- Removed broadcast/multicast optimization and only use virtio as
backup path when VF is unplugged.
v2 RFC:
- Changed VIRTIO_NET_F_MASTER to VIRTIO_NET_F_BACKUP (mst)
- made a small change to the virtio-net xmit path to only use VF datapath
for unicasts. Broadcasts/multicasts use virtio datapath. This avoids
east-west broadcasts to go over the PCI link.
- added suppport for the feature bit in qemu
Sridhar Samudrala (5):
net: Introduce generic failover module
netvsc: refactor notifier/event handling code to use the failover
framework
net: Introduce net_failover driver
virtio_net: Introduce VIRTIO_NET_F_STANDBY feature bit
virtio_net: Extend virtio to use VF datapath when available
Documentation/networking/failover.rst | 18 +
Documentation/networking/net_failover.rst | 116 +++++
MAINTAINERS | 16 +
drivers/net/Kconfig | 13 +
drivers/net/Makefile | 1 +
drivers/net/hyperv/Kconfig | 1 +
drivers/net/hyperv/hyperv_net.h | 2 +
drivers/net/hyperv/netvsc_drv.c | 133 +----
drivers/net/net_failover.c | 836 ++++++++++++++++++++++++++++++
drivers/net/virtio_net.c | 40 +-
include/linux/netdevice.h | 16 +
include/net/failover.h | 31 ++
include/net/net_failover.h | 40 ++
include/uapi/linux/virtio_net.h | 3 +
net/Kconfig | 13 +
net/core/Makefile | 1 +
net/core/failover.c | 273 ++++++++++
17 files changed, 1440 insertions(+), 113 deletions(-)
create mode 100644 Documentation/networking/failover.rst
create mode 100644 Documentation/networking/net_failover.rst
create mode 100644 drivers/net/net_failover.c
create mode 100644 include/net/failover.h
create mode 100644 include/net/net_failover.h
create mode 100644 net/core/failover.c
--
2.14.3
---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org
^ permalink raw reply
* [virtio-dev] [PATCH net-next v11 5/5] virtio_net: Extend virtio to use VF datapath when available
From: Sridhar Samudrala @ 2018-05-22 2:06 UTC (permalink / raw)
To: mst, stephen, davem, netdev, virtualization, virtio-dev,
jesse.brandeburg, alexander.h.duyck, kubakici, sridhar.samudrala,
jasowang, loseweigh, jiri, aaron.f.brown, anjali.singhai
In-Reply-To: <1526954781-35359-1-git-send-email-sridhar.samudrala@intel.com>
This patch enables virtio_net to switch over to a VF datapath when STANDBY
feature is enabled and a VF netdev is present with the same MAC address.
It allows live migration of a VM with a direct attached VF without the need
to setup a bond/team between a VF and virtio net device in the guest.
It uses the API that is exported by the net_failover driver to create and
and destroy a master failover netdev. When STANDBY feature is enabled, an
additional netdev(failover netdev) is created that acts as a master device
and tracks the state of the 2 lower netdevs. The original virtio_net netdev
is marked as 'standby' netdev and a passthru device with the same MAC is
registered as 'primary' netdev.
The hypervisor needs to unplug the VF device from the guest on the source
host and reset the MAC filter of the VF to initiate failover of datapath
to virtio before starting the migration. After the migration is completed,
the destination hypervisor sets the MAC filter on the VF and plugs it back
to the guest to switch over to VF datapath.
This patch is based on the discussion initiated by Jesse on this thread.
https://marc.info/?l=linux-virtualization&m=151189725224231&w=2
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
---
Documentation/networking/net_failover.rst | 90 +++++++++++++++++++++++++++++++
drivers/net/Kconfig | 1 +
drivers/net/virtio_net.c | 38 ++++++++++++-
3 files changed, 128 insertions(+), 1 deletion(-)
diff --git a/Documentation/networking/net_failover.rst b/Documentation/networking/net_failover.rst
index 6764c3b1eec8..3ad8376f8fa7 100644
--- a/Documentation/networking/net_failover.rst
+++ b/Documentation/networking/net_failover.rst
@@ -24,3 +24,93 @@ This can be used by paravirtual drivers to enable an alternate low latency
datapath. It also enables hypervisor controlled live migration of a VM with
direct attached VF by failing over to the paravirtual datapath when the VF
is unplugged.
+
+virtio-net accelerated datapath: STANDBY mode
+=============================================
+
+net_failover enables hypervisor controlled accelerated datapath to virtio-net
+enabled VMs in a transparent manner with no/minimal guest userspace chanages.
+
+To support this, the hypervisor needs to enable VIRTIO_NET_F_STANDBY
+feature on the virtio-net interface and assign the same MAC address to both
+virtio-net and VF interfaces.
+
+Here is an example XML snippet that shows such configuration.
+
+ <interface type='network'>
+ <mac address='52:54:00:00:12:53'/>
+ <source network='enp66s0f0_br'/>
+ <target dev='tap01'/>
+ <model type='virtio'/>
+ <driver name='vhost' queues='4'/>
+ <link state='down'/>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
+ </interface>
+ <interface type='hostdev' managed='yes'>
+ <mac address='52:54:00:00:12:53'/>
+ <source>
+ <address type='pci' domain='0x0000' bus='0x42' slot='0x02' function='0x5'/>
+ </source>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
+ </interface>
+
+Booting a VM with the above configuration will result in the following 3
+netdevs created in the VM.
+
+4: ens10: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
+ link/ether 52:54:00:00:12:53 brd ff:ff:ff:ff:ff:ff
+ inet 192.168.12.53/24 brd 192.168.12.255 scope global dynamic ens10
+ valid_lft 42482sec preferred_lft 42482sec
+ inet6 fe80::97d8:db2:8c10:b6d6/64 scope link
+ valid_lft forever preferred_lft forever
+5: ens10nsby: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master ens10 state UP group default qlen 1000
+ link/ether 52:54:00:00:12:53 brd ff:ff:ff:ff:ff:ff
+7: ens11: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master ens10 state UP group default qlen 1000
+ link/ether 52:54:00:00:12:53 brd ff:ff:ff:ff:ff:ff
+
+ens10 is the 'failover' master netdev, ens10nsby and ens11 are the slave
+'standby' and 'primary' netdevs respectively.
+
+Live Migration of a VM with SR-IOV VF & virtio-net in STANDBY mode
+==================================================================
+
+net_failover also enables hypervisor controlled live migration to be supported
+with VMs that have direct attached SR-IOV VF devices by automatic failover to
+the paravirtual datapath when the VF is unplugged.
+
+Here is a sample script that shows the steps to initiate live migration on
+the source hypervisor.
+
+# cat vf_xml
+<interface type='hostdev' managed='yes'>
+ <mac address='52:54:00:00:12:53'/>
+ <source>
+ <address type='pci' domain='0x0000' bus='0x42' slot='0x02' function='0x5'/>
+ </source>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
+</interface>
+
+# Source Hypervisor
+#!/bin/bash
+
+DOMAIN=fedora27-tap01
+PF=enp66s0f0
+VF_NUM=5
+TAP_IF=tap01
+VF_XML=
+
+MAC=52:54:00:00:12:53
+ZERO_MAC=00:00:00:00:00:00
+
+virsh domif-setlink $DOMAIN $TAP_IF up
+bridge fdb del $MAC dev $PF master
+virsh detach-device $DOMAIN $VF_XML
+ip link set $PF vf $VF_NUM mac $ZERO_MAC
+
+virsh migrate --live $DOMAIN qemu+ssh://$REMOTE_HOST/system
+
+# Destination Hypervisor
+#!/bin/bash
+
+virsh attach-device $DOMAIN $VF_XML
+virsh domif-setlink $DOMAIN $TAP_IF down
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 1cf29c5ed510..148bcf1b4bf9 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -332,6 +332,7 @@ config VETH
config VIRTIO_NET
tristate "Virtio network driver"
depends on VIRTIO
+ select NET_FAILOVER
---help---
This is the virtual network driver for virtio. It can be used with
QEMU based VMMs (like KVM or Xen). Say Y or M.
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 213fddc70fd0..370828c3d114 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -30,8 +30,11 @@
#include <linux/cpu.h>
#include <linux/average.h>
#include <linux/filter.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
#include <net/route.h>
#include <net/xdp.h>
+#include <net/net_failover.h>
static int napi_weight = NAPI_POLL_WEIGHT;
module_param(napi_weight, int, 0444);
@@ -210,6 +213,9 @@ struct virtnet_info {
u32 speed;
unsigned long guest_offloads;
+
+ /* failover when STANDBY feature enabled */
+ struct failover *failover;
};
struct padded_vnet_hdr {
@@ -1523,6 +1529,9 @@ static int virtnet_set_mac_address(struct net_device *dev, void *p)
struct sockaddr *addr;
struct scatterlist sg;
+ if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STANDBY))
+ return -EOPNOTSUPP;
+
addr = kmemdup(p, sizeof(*addr), GFP_KERNEL);
if (!addr)
return -ENOMEM;
@@ -2306,6 +2315,22 @@ static int virtnet_xdp(struct net_device *dev, struct netdev_bpf *xdp)
}
}
+static int virtnet_get_phys_port_name(struct net_device *dev, char *buf,
+ size_t len)
+{
+ struct virtnet_info *vi = netdev_priv(dev);
+ int ret;
+
+ if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_STANDBY))
+ return -EOPNOTSUPP;
+
+ ret = snprintf(buf, len, "sby");
+ if (ret >= len)
+ return -EOPNOTSUPP;
+
+ return 0;
+}
+
static const struct net_device_ops virtnet_netdev = {
.ndo_open = virtnet_open,
.ndo_stop = virtnet_close,
@@ -2323,6 +2348,7 @@ static const struct net_device_ops virtnet_netdev = {
.ndo_xdp_xmit = virtnet_xdp_xmit,
.ndo_xdp_flush = virtnet_xdp_flush,
.ndo_features_check = passthru_features_check,
+ .ndo_get_phys_port_name = virtnet_get_phys_port_name,
};
static void virtnet_config_changed_work(struct work_struct *work)
@@ -2876,10 +2902,16 @@ static int virtnet_probe(struct virtio_device *vdev)
virtnet_init_settings(dev);
+ if (virtio_has_feature(vdev, VIRTIO_NET_F_STANDBY)) {
+ vi->failover = net_failover_create(vi->dev);
+ if (IS_ERR(vi->failover))
+ goto free_vqs;
+ }
+
err = register_netdev(dev);
if (err) {
pr_debug("virtio_net: registering device failed\n");
- goto free_vqs;
+ goto free_failover;
}
virtio_device_ready(vdev);
@@ -2916,6 +2948,8 @@ static int virtnet_probe(struct virtio_device *vdev)
vi->vdev->config->reset(vdev);
unregister_netdev(dev);
+free_failover:
+ net_failover_destroy(vi->failover);
free_vqs:
cancel_delayed_work_sync(&vi->refill);
free_receive_page_frags(vi);
@@ -2950,6 +2984,8 @@ static void virtnet_remove(struct virtio_device *vdev)
unregister_netdev(vi->dev);
+ net_failover_destroy(vi->failover);
+
remove_vq_common(vi);
free_netdev(vi->dev);
--
2.14.3
---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org
^ permalink raw reply related
* [virtio-dev] [PATCH net-next v11 4/5] virtio_net: Introduce VIRTIO_NET_F_STANDBY feature bit
From: Sridhar Samudrala @ 2018-05-22 2:06 UTC (permalink / raw)
To: mst, stephen, davem, netdev, virtualization, virtio-dev,
jesse.brandeburg, alexander.h.duyck, kubakici, sridhar.samudrala,
jasowang, loseweigh, jiri, aaron.f.brown, anjali.singhai
In-Reply-To: <1526954781-35359-1-git-send-email-sridhar.samudrala@intel.com>
This feature bit can be used by hypervisor to indicate virtio_net device to
act as a standby for another device with the same MAC address.
VIRTIO_NET_F_STANDBY is defined as bit 62 as it is a device feature bit.
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
---
drivers/net/virtio_net.c | 2 +-
include/uapi/linux/virtio_net.h | 3 +++
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index f34794a76c4d..213fddc70fd0 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -2999,7 +2999,7 @@ static struct virtio_device_id id_table[] = {
VIRTIO_NET_F_GUEST_ANNOUNCE, VIRTIO_NET_F_MQ, \
VIRTIO_NET_F_CTRL_MAC_ADDR, \
VIRTIO_NET_F_MTU, VIRTIO_NET_F_CTRL_GUEST_OFFLOADS, \
- VIRTIO_NET_F_SPEED_DUPLEX
+ VIRTIO_NET_F_SPEED_DUPLEX, VIRTIO_NET_F_STANDBY
static unsigned int features[] = {
VIRTNET_FEATURES,
diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h
index 5de6ed37695b..a3715a3224c1 100644
--- a/include/uapi/linux/virtio_net.h
+++ b/include/uapi/linux/virtio_net.h
@@ -57,6 +57,9 @@
* Steering */
#define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */
+#define VIRTIO_NET_F_STANDBY 62 /* Act as standby for another device
+ * with the same MAC.
+ */
#define VIRTIO_NET_F_SPEED_DUPLEX 63 /* Device set linkspeed and duplex */
#ifndef VIRTIO_NET_NO_LEGACY
--
2.14.3
---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org
^ permalink raw reply related
* [virtio-dev] [PATCH net-next v11 1/5] net: Introduce generic failover module
From: Sridhar Samudrala @ 2018-05-22 2:06 UTC (permalink / raw)
To: mst, stephen, davem, netdev, virtualization, virtio-dev,
jesse.brandeburg, alexander.h.duyck, kubakici, sridhar.samudrala,
jasowang, loseweigh, jiri, aaron.f.brown, anjali.singhai
In-Reply-To: <1526954781-35359-1-git-send-email-sridhar.samudrala@intel.com>
The failover module provides a generic interface for paravirtual drivers
to register a netdev and a set of ops with a failover instance. The ops
are used as event handlers that get called to handle netdev register/
unregister/link change/name change events on slave pci ethernet devices
with the same mac address as the failover netdev.
This enables paravirtual drivers to use a VF as an accelerated low latency
datapath. It also allows migration of VMs with direct attached VFs by
failing over to the paravirtual datapath when the VF is unplugged.
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
---
Documentation/networking/failover.rst | 18 +++
MAINTAINERS | 8 +
include/linux/netdevice.h | 16 ++
include/net/failover.h | 31 ++++
net/Kconfig | 13 ++
net/core/Makefile | 1 +
net/core/failover.c | 273 ++++++++++++++++++++++++++++++++++
7 files changed, 360 insertions(+)
create mode 100644 Documentation/networking/failover.rst
create mode 100644 include/net/failover.h
create mode 100644 net/core/failover.c
diff --git a/Documentation/networking/failover.rst b/Documentation/networking/failover.rst
new file mode 100644
index 000000000000..f0c8483cdbf5
--- /dev/null
+++ b/Documentation/networking/failover.rst
@@ -0,0 +1,18 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========
+FAILOVER
+========
+
+Overview
+========
+
+The failover module provides a generic interface for paravirtual drivers
+to register a netdev and a set of ops with a failover instance. The ops
+are used as event handlers that get called to handle netdev register/
+unregister/link change/name change events on slave pci ethernet devices
+with the same mac address as the failover netdev.
+
+This enables paravirtual drivers to use a VF as an accelerated low latency
+datapath. It also allows live migration of VMs with direct attached VFs by
+failing over to the paravirtual datapath when the VF is unplugged.
diff --git a/MAINTAINERS b/MAINTAINERS
index 658880464b9d..aed9575ddc53 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5413,6 +5413,14 @@ S: Maintained
F: Documentation/hwmon/f71805f
F: drivers/hwmon/f71805f.c
+FAILOVER MODULE
+M: Sridhar Samudrala <sridhar.samudrala@intel.com>
+L: netdev@vger.kernel.org
+S: Supported
+F: net/core/failover.c
+F: include/net/failover.h
+F: Documentation/networking/failover.rst
+
FANOTIFY
M: Jan Kara <jack@suse.cz>
R: Amir Goldstein <amir73il@gmail.com>
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 03ed492c4e14..0f4ba52b641d 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1421,6 +1421,8 @@ struct net_device_ops {
* entity (i.e. the master device for bridged veth)
* @IFF_MACSEC: device is a MACsec device
* @IFF_NO_RX_HANDLER: device doesn't support the rx_handler hook
+ * @IFF_FAILOVER: device is a failover master device
+ * @IFF_FAILOVER_SLAVE: device is lower dev of a failover master device
*/
enum netdev_priv_flags {
IFF_802_1Q_VLAN = 1<<0,
@@ -1450,6 +1452,8 @@ enum netdev_priv_flags {
IFF_PHONY_HEADROOM = 1<<24,
IFF_MACSEC = 1<<25,
IFF_NO_RX_HANDLER = 1<<26,
+ IFF_FAILOVER = 1<<27,
+ IFF_FAILOVER_SLAVE = 1<<28,
};
#define IFF_802_1Q_VLAN IFF_802_1Q_VLAN
@@ -1478,6 +1482,8 @@ enum netdev_priv_flags {
#define IFF_RXFH_CONFIGURED IFF_RXFH_CONFIGURED
#define IFF_MACSEC IFF_MACSEC
#define IFF_NO_RX_HANDLER IFF_NO_RX_HANDLER
+#define IFF_FAILOVER IFF_FAILOVER
+#define IFF_FAILOVER_SLAVE IFF_FAILOVER_SLAVE
/**
* struct net_device - The DEVICE structure.
@@ -4321,6 +4327,16 @@ static inline bool netif_is_rxfh_configured(const struct net_device *dev)
return dev->priv_flags & IFF_RXFH_CONFIGURED;
}
+static inline bool netif_is_failover(const struct net_device *dev)
+{
+ return dev->priv_flags & IFF_FAILOVER;
+}
+
+static inline bool netif_is_failover_slave(const struct net_device *dev)
+{
+ return dev->priv_flags & IFF_FAILOVER_SLAVE;
+}
+
/* This device needs to keep skb dst for qdisc enqueue or ndo_start_xmit() */
static inline void netif_keep_dst(struct net_device *dev)
{
diff --git a/include/net/failover.h b/include/net/failover.h
new file mode 100644
index 000000000000..fea9d0b978c8
--- /dev/null
+++ b/include/net/failover.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2018, Intel Corporation. */
+
+#ifndef _FAILOVER_H
+#define _FAILOVER_H
+
+#include <linux/netdevice.h>
+
+struct failover_ops {
+ int (*slave_register)(struct net_device *slave_dev,
+ struct net_device *failover_dev);
+ int (*slave_unregister)(struct net_device *slave_dev,
+ struct net_device *failover_dev);
+ int (*slave_link_change)(struct net_device *slave_dev,
+ struct net_device *failover_dev);
+ int (*slave_name_change)(struct net_device *slave_dev,
+ struct net_device *failover_dev);
+};
+
+struct failover {
+ struct list_head list;
+ struct net_device __rcu *failover_dev;
+ struct failover_ops __rcu *ops;
+};
+
+struct failover *failover_register(struct net_device *dev,
+ struct failover_ops *ops);
+void failover_unregister(struct failover *failover);
+int failover_slave_unregister(struct net_device *slave_dev);
+
+#endif /* _FAILOVER_H */
diff --git a/net/Kconfig b/net/Kconfig
index df8d45ef47d8..d581c4f0f1c4 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -430,6 +430,19 @@ config MAY_USE_DEVLINK
config PAGE_POOL
bool
+config FAILOVER
+ tristate "Generic failover module"
+ help
+ The failover module provides a generic interface for paravirtual
+ drivers to register a netdev and a set of ops with a failover
+ instance. The ops are used as event handlers that get called to
+ handle netdev register/unregister/link change/name change events
+ on slave pci ethernet devices with the same mac address as the
+ failover netdev. This enables paravirtual drivers to use a
+ VF as an accelerated low latency datapath. It also allows live
+ migration of VMs with direct attached VFs by failing over to the
+ paravirtual datapath when the VF is unplugged.
+
endif # if NET
# Used by archs to tell that they support BPF JIT compiler plus which flavour.
diff --git a/net/core/Makefile b/net/core/Makefile
index 7080417f8bc8..80175e6a2eb8 100644
--- a/net/core/Makefile
+++ b/net/core/Makefile
@@ -31,3 +31,4 @@ obj-$(CONFIG_DST_CACHE) += dst_cache.o
obj-$(CONFIG_HWBM) += hwbm.o
obj-$(CONFIG_NET_DEVLINK) += devlink.o
obj-$(CONFIG_GRO_CELLS) += gro_cells.o
+obj-$(CONFIG_FAILOVER) += failover.o
diff --git a/net/core/failover.c b/net/core/failover.c
new file mode 100644
index 000000000000..48ee713a1ef4
--- /dev/null
+++ b/net/core/failover.c
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2018, Intel Corporation. */
+
+/* A common module to handle registrations and notifications for paravirtual
+ * drivers to enable accelerated datapath and support VF live migration.
+ *
+ * The notifier and event handling code is based on netvsc driver.
+ */
+
+#include <linux/module.h>
+#include <linux/etherdevice.h>
+#include <uapi/linux/if_arp.h>
+#include <linux/rtnetlink.h>
+#include <net/failover.h>
+
+static LIST_HEAD(failover_list);
+static DEFINE_SPINLOCK(failover_lock);
+
+static struct net_device *failover_get_bymac(u8 *mac, struct failover_ops **ops)
+{
+ struct net_device *failover_dev;
+ struct failover *failover;
+
+ spin_lock(&failover_lock);
+ list_for_each_entry(failover, &failover_list, list) {
+ failover_dev = rtnl_dereference(failover->failover_dev);
+ if (ether_addr_equal(failover_dev->perm_addr, mac)) {
+ *ops = rtnl_dereference(failover->ops);
+ spin_unlock(&failover_lock);
+ return failover_dev;
+ }
+ }
+ spin_unlock(&failover_lock);
+ return NULL;
+}
+
+/**
+ * failover_slave_register - Register a slave netdev
+ *
+ * @slave_dev: slave netdev that is being registered
+ *
+ * Registers a slave device to a failover instance. Only ethernet devices
+ * are supported.
+ */
+static int failover_slave_register(struct net_device *slave_dev)
+{
+ struct net_device *failover_dev;
+ struct failover_ops *fops;
+
+ if (slave_dev->type != ARPHRD_ETHER)
+ goto done;
+
+ ASSERT_RTNL();
+
+ failover_dev = failover_get_bymac(slave_dev->perm_addr, &fops);
+ if (!failover_dev)
+ goto done;
+
+ if (fops && fops->slave_register)
+ return fops->slave_register(slave_dev, failover_dev);
+
+done:
+ return NOTIFY_DONE;
+}
+
+/**
+ * failover_slave_unregister - Unregister a slave netdev
+ *
+ * @slave_dev: slave netdev that is being unregistered
+ *
+ * Unregisters a slave device from a failover instance.
+ */
+int failover_slave_unregister(struct net_device *slave_dev)
+{
+ struct net_device *failover_dev;
+ struct failover_ops *fops;
+
+ if (!netif_is_failover_slave(slave_dev))
+ goto done;
+
+ ASSERT_RTNL();
+
+ failover_dev = failover_get_bymac(slave_dev->perm_addr, &fops);
+ if (!failover_dev)
+ goto done;
+
+ if (fops && fops->slave_unregister)
+ return fops->slave_unregister(slave_dev, failover_dev);
+
+done:
+ return NOTIFY_DONE;
+}
+EXPORT_SYMBOL_GPL(failover_slave_unregister);
+
+static int failover_slave_link_change(struct net_device *slave_dev)
+{
+ struct net_device *failover_dev;
+ struct failover_ops *fops;
+
+ if (!netif_is_failover_slave(slave_dev))
+ goto done;
+
+ ASSERT_RTNL();
+
+ failover_dev = failover_get_bymac(slave_dev->perm_addr, &fops);
+ if (!failover_dev)
+ goto done;
+
+ if (!netif_running(failover_dev))
+ goto done;
+
+ if (fops && fops->slave_link_change)
+ return fops->slave_link_change(slave_dev, failover_dev);
+
+done:
+ return NOTIFY_DONE;
+}
+
+static int failover_slave_name_change(struct net_device *slave_dev)
+{
+ struct net_device *failover_dev;
+ struct failover_ops *fops;
+
+ if (!netif_is_failover_slave(slave_dev))
+ goto done;
+
+ ASSERT_RTNL();
+
+ failover_dev = failover_get_bymac(slave_dev->perm_addr, &fops);
+ if (!failover_dev)
+ goto done;
+
+ if (!netif_running(failover_dev))
+ goto done;
+
+ if (fops && fops->slave_name_change)
+ return fops->slave_name_change(slave_dev, failover_dev);
+
+done:
+ return NOTIFY_DONE;
+}
+
+static int
+failover_event(struct notifier_block *this, unsigned long event, void *ptr)
+{
+ struct net_device *event_dev = netdev_notifier_info_to_dev(ptr);
+
+ /* Skip parent events */
+ if (netif_is_failover(event_dev))
+ return NOTIFY_DONE;
+
+ switch (event) {
+ case NETDEV_REGISTER:
+ return failover_slave_register(event_dev);
+ case NETDEV_UNREGISTER:
+ return failover_slave_unregister(event_dev);
+ case NETDEV_UP:
+ case NETDEV_DOWN:
+ case NETDEV_CHANGE:
+ return failover_slave_link_change(event_dev);
+ case NETDEV_CHANGENAME:
+ return failover_slave_name_change(event_dev);
+ default:
+ return NOTIFY_DONE;
+ }
+}
+
+static struct notifier_block failover_notifier = {
+ .notifier_call = failover_event,
+};
+
+static void
+failover_existing_slave_register(struct net_device *failover_dev)
+{
+ struct net *net = dev_net(failover_dev);
+ struct net_device *dev;
+
+ rtnl_lock();
+ for_each_netdev(net, dev) {
+ if (netif_is_failover(dev))
+ continue;
+ if (ether_addr_equal(failover_dev->perm_addr, dev->perm_addr))
+ failover_slave_register(dev);
+ }
+ rtnl_unlock();
+}
+
+/**
+ * failover_register - Register a failover instance
+ *
+ * @dev: failover netdev
+ * @ops: failover ops
+ *
+ * Allocate and register a failover instance for a failover netdev. ops
+ * provides handlers for slave device register/unregister/link change/
+ * name change events.
+ *
+ * Return: pointer to failover instance
+ */
+struct failover *failover_register(struct net_device *dev,
+ struct failover_ops *ops)
+{
+ struct failover *failover;
+
+ if (dev->type != ARPHRD_ETHER)
+ return ERR_PTR(-EINVAL);
+
+ failover = kzalloc(sizeof(*failover), GFP_KERNEL);
+ if (!failover)
+ return ERR_PTR(-ENOMEM);
+
+ rcu_assign_pointer(failover->ops, ops);
+ dev_hold(dev);
+ dev->priv_flags |= IFF_FAILOVER;
+ rcu_assign_pointer(failover->failover_dev, dev);
+
+ spin_lock(&failover_lock);
+ list_add_tail(&failover->list, &failover_list);
+ spin_unlock(&failover_lock);
+
+ netdev_info(dev, "failover master:%s registered\n", dev->name);
+
+ failover_existing_slave_register(dev);
+
+ return failover;
+}
+EXPORT_SYMBOL_GPL(failover_register);
+
+/**
+ * failover_unregister - Unregister a failover instance
+ *
+ * @failover: pointer to failover instance
+ *
+ * Unregisters and frees a failover instance.
+ */
+void failover_unregister(struct failover *failover)
+{
+ struct net_device *failover_dev;
+
+ failover_dev = rcu_dereference(failover->failover_dev);
+
+ netdev_info(failover_dev, "failover master:%s unregistered\n",
+ failover_dev->name);
+
+ failover_dev->priv_flags &= ~IFF_FAILOVER;
+ dev_put(failover_dev);
+
+ spin_lock(&failover_lock);
+ list_del(&failover->list);
+ spin_unlock(&failover_lock);
+
+ kfree(failover);
+}
+EXPORT_SYMBOL_GPL(failover_unregister);
+
+static __init int
+failover_init(void)
+{
+ register_netdevice_notifier(&failover_notifier);
+
+ return 0;
+}
+module_init(failover_init);
+
+static __exit
+void failover_exit(void)
+{
+ unregister_netdevice_notifier(&failover_notifier);
+}
+module_exit(failover_exit);
+
+MODULE_DESCRIPTION("Generic failover infrastructure/interface");
+MODULE_LICENSE("GPL v2");
--
2.14.3
---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org
^ permalink raw reply related
* [PATCH net-next v11 5/5] virtio_net: Extend virtio to use VF datapath when available
From: Sridhar Samudrala @ 2018-05-22 2:06 UTC (permalink / raw)
To: mst, stephen, davem, netdev, virtualization, virtio-dev,
jesse.brandeburg, alexander.h.duyck, kubakici, sridhar.samudrala,
jasowang, loseweigh, jiri, aaron.f.brown, anjali.singhai
In-Reply-To: <1526954781-35359-1-git-send-email-sridhar.samudrala@intel.com>
This patch enables virtio_net to switch over to a VF datapath when STANDBY
feature is enabled and a VF netdev is present with the same MAC address.
It allows live migration of a VM with a direct attached VF without the need
to setup a bond/team between a VF and virtio net device in the guest.
It uses the API that is exported by the net_failover driver to create and
and destroy a master failover netdev. When STANDBY feature is enabled, an
additional netdev(failover netdev) is created that acts as a master device
and tracks the state of the 2 lower netdevs. The original virtio_net netdev
is marked as 'standby' netdev and a passthru device with the same MAC is
registered as 'primary' netdev.
The hypervisor needs to unplug the VF device from the guest on the source
host and reset the MAC filter of the VF to initiate failover of datapath
to virtio before starting the migration. After the migration is completed,
the destination hypervisor sets the MAC filter on the VF and plugs it back
to the guest to switch over to VF datapath.
This patch is based on the discussion initiated by Jesse on this thread.
https://marc.info/?l=linux-virtualization&m=151189725224231&w=2
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
---
Documentation/networking/net_failover.rst | 90 +++++++++++++++++++++++++++++++
drivers/net/Kconfig | 1 +
drivers/net/virtio_net.c | 38 ++++++++++++-
3 files changed, 128 insertions(+), 1 deletion(-)
diff --git a/Documentation/networking/net_failover.rst b/Documentation/networking/net_failover.rst
index 6764c3b1eec8..3ad8376f8fa7 100644
--- a/Documentation/networking/net_failover.rst
+++ b/Documentation/networking/net_failover.rst
@@ -24,3 +24,93 @@ This can be used by paravirtual drivers to enable an alternate low latency
datapath. It also enables hypervisor controlled live migration of a VM with
direct attached VF by failing over to the paravirtual datapath when the VF
is unplugged.
+
+virtio-net accelerated datapath: STANDBY mode
+=============================================
+
+net_failover enables hypervisor controlled accelerated datapath to virtio-net
+enabled VMs in a transparent manner with no/minimal guest userspace chanages.
+
+To support this, the hypervisor needs to enable VIRTIO_NET_F_STANDBY
+feature on the virtio-net interface and assign the same MAC address to both
+virtio-net and VF interfaces.
+
+Here is an example XML snippet that shows such configuration.
+
+ <interface type='network'>
+ <mac address='52:54:00:00:12:53'/>
+ <source network='enp66s0f0_br'/>
+ <target dev='tap01'/>
+ <model type='virtio'/>
+ <driver name='vhost' queues='4'/>
+ <link state='down'/>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
+ </interface>
+ <interface type='hostdev' managed='yes'>
+ <mac address='52:54:00:00:12:53'/>
+ <source>
+ <address type='pci' domain='0x0000' bus='0x42' slot='0x02' function='0x5'/>
+ </source>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
+ </interface>
+
+Booting a VM with the above configuration will result in the following 3
+netdevs created in the VM.
+
+4: ens10: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
+ link/ether 52:54:00:00:12:53 brd ff:ff:ff:ff:ff:ff
+ inet 192.168.12.53/24 brd 192.168.12.255 scope global dynamic ens10
+ valid_lft 42482sec preferred_lft 42482sec
+ inet6 fe80::97d8:db2:8c10:b6d6/64 scope link
+ valid_lft forever preferred_lft forever
+5: ens10nsby: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master ens10 state UP group default qlen 1000
+ link/ether 52:54:00:00:12:53 brd ff:ff:ff:ff:ff:ff
+7: ens11: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master ens10 state UP group default qlen 1000
+ link/ether 52:54:00:00:12:53 brd ff:ff:ff:ff:ff:ff
+
+ens10 is the 'failover' master netdev, ens10nsby and ens11 are the slave
+'standby' and 'primary' netdevs respectively.
+
+Live Migration of a VM with SR-IOV VF & virtio-net in STANDBY mode
+==================================================================
+
+net_failover also enables hypervisor controlled live migration to be supported
+with VMs that have direct attached SR-IOV VF devices by automatic failover to
+the paravirtual datapath when the VF is unplugged.
+
+Here is a sample script that shows the steps to initiate live migration on
+the source hypervisor.
+
+# cat vf_xml
+<interface type='hostdev' managed='yes'>
+ <mac address='52:54:00:00:12:53'/>
+ <source>
+ <address type='pci' domain='0x0000' bus='0x42' slot='0x02' function='0x5'/>
+ </source>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
+</interface>
+
+# Source Hypervisor
+#!/bin/bash
+
+DOMAIN=fedora27-tap01
+PF=enp66s0f0
+VF_NUM=5
+TAP_IF=tap01
+VF_XML=
+
+MAC=52:54:00:00:12:53
+ZERO_MAC=00:00:00:00:00:00
+
+virsh domif-setlink $DOMAIN $TAP_IF up
+bridge fdb del $MAC dev $PF master
+virsh detach-device $DOMAIN $VF_XML
+ip link set $PF vf $VF_NUM mac $ZERO_MAC
+
+virsh migrate --live $DOMAIN qemu+ssh://$REMOTE_HOST/system
+
+# Destination Hypervisor
+#!/bin/bash
+
+virsh attach-device $DOMAIN $VF_XML
+virsh domif-setlink $DOMAIN $TAP_IF down
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 1cf29c5ed510..148bcf1b4bf9 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -332,6 +332,7 @@ config VETH
config VIRTIO_NET
tristate "Virtio network driver"
depends on VIRTIO
+ select NET_FAILOVER
---help---
This is the virtual network driver for virtio. It can be used with
QEMU based VMMs (like KVM or Xen). Say Y or M.
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 213fddc70fd0..370828c3d114 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -30,8 +30,11 @@
#include <linux/cpu.h>
#include <linux/average.h>
#include <linux/filter.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
#include <net/route.h>
#include <net/xdp.h>
+#include <net/net_failover.h>
static int napi_weight = NAPI_POLL_WEIGHT;
module_param(napi_weight, int, 0444);
@@ -210,6 +213,9 @@ struct virtnet_info {
u32 speed;
unsigned long guest_offloads;
+
+ /* failover when STANDBY feature enabled */
+ struct failover *failover;
};
struct padded_vnet_hdr {
@@ -1523,6 +1529,9 @@ static int virtnet_set_mac_address(struct net_device *dev, void *p)
struct sockaddr *addr;
struct scatterlist sg;
+ if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STANDBY))
+ return -EOPNOTSUPP;
+
addr = kmemdup(p, sizeof(*addr), GFP_KERNEL);
if (!addr)
return -ENOMEM;
@@ -2306,6 +2315,22 @@ static int virtnet_xdp(struct net_device *dev, struct netdev_bpf *xdp)
}
}
+static int virtnet_get_phys_port_name(struct net_device *dev, char *buf,
+ size_t len)
+{
+ struct virtnet_info *vi = netdev_priv(dev);
+ int ret;
+
+ if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_STANDBY))
+ return -EOPNOTSUPP;
+
+ ret = snprintf(buf, len, "sby");
+ if (ret >= len)
+ return -EOPNOTSUPP;
+
+ return 0;
+}
+
static const struct net_device_ops virtnet_netdev = {
.ndo_open = virtnet_open,
.ndo_stop = virtnet_close,
@@ -2323,6 +2348,7 @@ static const struct net_device_ops virtnet_netdev = {
.ndo_xdp_xmit = virtnet_xdp_xmit,
.ndo_xdp_flush = virtnet_xdp_flush,
.ndo_features_check = passthru_features_check,
+ .ndo_get_phys_port_name = virtnet_get_phys_port_name,
};
static void virtnet_config_changed_work(struct work_struct *work)
@@ -2876,10 +2902,16 @@ static int virtnet_probe(struct virtio_device *vdev)
virtnet_init_settings(dev);
+ if (virtio_has_feature(vdev, VIRTIO_NET_F_STANDBY)) {
+ vi->failover = net_failover_create(vi->dev);
+ if (IS_ERR(vi->failover))
+ goto free_vqs;
+ }
+
err = register_netdev(dev);
if (err) {
pr_debug("virtio_net: registering device failed\n");
- goto free_vqs;
+ goto free_failover;
}
virtio_device_ready(vdev);
@@ -2916,6 +2948,8 @@ static int virtnet_probe(struct virtio_device *vdev)
vi->vdev->config->reset(vdev);
unregister_netdev(dev);
+free_failover:
+ net_failover_destroy(vi->failover);
free_vqs:
cancel_delayed_work_sync(&vi->refill);
free_receive_page_frags(vi);
@@ -2950,6 +2984,8 @@ static void virtnet_remove(struct virtio_device *vdev)
unregister_netdev(vi->dev);
+ net_failover_destroy(vi->failover);
+
remove_vq_common(vi);
free_netdev(vi->dev);
--
2.14.3
^ permalink raw reply related
* [PATCH net-next v11 5/5] virtio_net: Extend virtio to use VF datapath when available
From: Sridhar Samudrala @ 2018-05-22 2:06 UTC (permalink / raw)
To: mst, stephen, davem, netdev, virtualization, virtio-dev,
jesse.brandeburg, alexander.h.duyck, kubakici, sridhar.samudrala,
jasowang, loseweigh, jiri, aaron.f.brown, anjali.singhai
In-Reply-To: <1526954781-35359-1-git-send-email-sridhar.samudrala@intel.com>
This patch enables virtio_net to switch over to a VF datapath when STANDBY
feature is enabled and a VF netdev is present with the same MAC address.
It allows live migration of a VM with a direct attached VF without the need
to setup a bond/team between a VF and virtio net device in the guest.
It uses the API that is exported by the net_failover driver to create and
and destroy a master failover netdev. When STANDBY feature is enabled, an
additional netdev(failover netdev) is created that acts as a master device
and tracks the state of the 2 lower netdevs. The original virtio_net netdev
is marked as 'standby' netdev and a passthru device with the same MAC is
registered as 'primary' netdev.
The hypervisor needs to unplug the VF device from the guest on the source
host and reset the MAC filter of the VF to initiate failover of datapath
to virtio before starting the migration. After the migration is completed,
the destination hypervisor sets the MAC filter on the VF and plugs it back
to the guest to switch over to VF datapath.
This patch is based on the discussion initiated by Jesse on this thread.
https://marc.info/?l=linux-virtualization&m=151189725224231&w=2
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
---
Documentation/networking/net_failover.rst | 90 +++++++++++++++++++++++++++++++
drivers/net/Kconfig | 1 +
drivers/net/virtio_net.c | 38 ++++++++++++-
3 files changed, 128 insertions(+), 1 deletion(-)
diff --git a/Documentation/networking/net_failover.rst b/Documentation/networking/net_failover.rst
index 6764c3b1eec8..3ad8376f8fa7 100644
--- a/Documentation/networking/net_failover.rst
+++ b/Documentation/networking/net_failover.rst
@@ -24,3 +24,93 @@ This can be used by paravirtual drivers to enable an alternate low latency
datapath. It also enables hypervisor controlled live migration of a VM with
direct attached VF by failing over to the paravirtual datapath when the VF
is unplugged.
+
+virtio-net accelerated datapath: STANDBY mode
+=============================================
+
+net_failover enables hypervisor controlled accelerated datapath to virtio-net
+enabled VMs in a transparent manner with no/minimal guest userspace chanages.
+
+To support this, the hypervisor needs to enable VIRTIO_NET_F_STANDBY
+feature on the virtio-net interface and assign the same MAC address to both
+virtio-net and VF interfaces.
+
+Here is an example XML snippet that shows such configuration.
+
+ <interface type='network'>
+ <mac address='52:54:00:00:12:53'/>
+ <source network='enp66s0f0_br'/>
+ <target dev='tap01'/>
+ <model type='virtio'/>
+ <driver name='vhost' queues='4'/>
+ <link state='down'/>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
+ </interface>
+ <interface type='hostdev' managed='yes'>
+ <mac address='52:54:00:00:12:53'/>
+ <source>
+ <address type='pci' domain='0x0000' bus='0x42' slot='0x02' function='0x5'/>
+ </source>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
+ </interface>
+
+Booting a VM with the above configuration will result in the following 3
+netdevs created in the VM.
+
+4: ens10: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
+ link/ether 52:54:00:00:12:53 brd ff:ff:ff:ff:ff:ff
+ inet 192.168.12.53/24 brd 192.168.12.255 scope global dynamic ens10
+ valid_lft 42482sec preferred_lft 42482sec
+ inet6 fe80::97d8:db2:8c10:b6d6/64 scope link
+ valid_lft forever preferred_lft forever
+5: ens10nsby: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master ens10 state UP group default qlen 1000
+ link/ether 52:54:00:00:12:53 brd ff:ff:ff:ff:ff:ff
+7: ens11: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master ens10 state UP group default qlen 1000
+ link/ether 52:54:00:00:12:53 brd ff:ff:ff:ff:ff:ff
+
+ens10 is the 'failover' master netdev, ens10nsby and ens11 are the slave
+'standby' and 'primary' netdevs respectively.
+
+Live Migration of a VM with SR-IOV VF & virtio-net in STANDBY mode
+==================================================================
+
+net_failover also enables hypervisor controlled live migration to be supported
+with VMs that have direct attached SR-IOV VF devices by automatic failover to
+the paravirtual datapath when the VF is unplugged.
+
+Here is a sample script that shows the steps to initiate live migration on
+the source hypervisor.
+
+# cat vf_xml
+<interface type='hostdev' managed='yes'>
+ <mac address='52:54:00:00:12:53'/>
+ <source>
+ <address type='pci' domain='0x0000' bus='0x42' slot='0x02' function='0x5'/>
+ </source>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
+</interface>
+
+# Source Hypervisor
+#!/bin/bash
+
+DOMAIN=fedora27-tap01
+PF=enp66s0f0
+VF_NUM=5
+TAP_IF=tap01
+VF_XML=
+
+MAC=52:54:00:00:12:53
+ZERO_MAC=00:00:00:00:00:00
+
+virsh domif-setlink $DOMAIN $TAP_IF up
+bridge fdb del $MAC dev $PF master
+virsh detach-device $DOMAIN $VF_XML
+ip link set $PF vf $VF_NUM mac $ZERO_MAC
+
+virsh migrate --live $DOMAIN qemu+ssh://$REMOTE_HOST/system
+
+# Destination Hypervisor
+#!/bin/bash
+
+virsh attach-device $DOMAIN $VF_XML
+virsh domif-setlink $DOMAIN $TAP_IF down
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 1cf29c5ed510..148bcf1b4bf9 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -332,6 +332,7 @@ config VETH
config VIRTIO_NET
tristate "Virtio network driver"
depends on VIRTIO
+ select NET_FAILOVER
---help---
This is the virtual network driver for virtio. It can be used with
QEMU based VMMs (like KVM or Xen). Say Y or M.
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 213fddc70fd0..370828c3d114 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -30,8 +30,11 @@
#include <linux/cpu.h>
#include <linux/average.h>
#include <linux/filter.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
#include <net/route.h>
#include <net/xdp.h>
+#include <net/net_failover.h>
static int napi_weight = NAPI_POLL_WEIGHT;
module_param(napi_weight, int, 0444);
@@ -210,6 +213,9 @@ struct virtnet_info {
u32 speed;
unsigned long guest_offloads;
+
+ /* failover when STANDBY feature enabled */
+ struct failover *failover;
};
struct padded_vnet_hdr {
@@ -1523,6 +1529,9 @@ static int virtnet_set_mac_address(struct net_device *dev, void *p)
struct sockaddr *addr;
struct scatterlist sg;
+ if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STANDBY))
+ return -EOPNOTSUPP;
+
addr = kmemdup(p, sizeof(*addr), GFP_KERNEL);
if (!addr)
return -ENOMEM;
@@ -2306,6 +2315,22 @@ static int virtnet_xdp(struct net_device *dev, struct netdev_bpf *xdp)
}
}
+static int virtnet_get_phys_port_name(struct net_device *dev, char *buf,
+ size_t len)
+{
+ struct virtnet_info *vi = netdev_priv(dev);
+ int ret;
+
+ if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_STANDBY))
+ return -EOPNOTSUPP;
+
+ ret = snprintf(buf, len, "sby");
+ if (ret >= len)
+ return -EOPNOTSUPP;
+
+ return 0;
+}
+
static const struct net_device_ops virtnet_netdev = {
.ndo_open = virtnet_open,
.ndo_stop = virtnet_close,
@@ -2323,6 +2348,7 @@ static const struct net_device_ops virtnet_netdev = {
.ndo_xdp_xmit = virtnet_xdp_xmit,
.ndo_xdp_flush = virtnet_xdp_flush,
.ndo_features_check = passthru_features_check,
+ .ndo_get_phys_port_name = virtnet_get_phys_port_name,
};
static void virtnet_config_changed_work(struct work_struct *work)
@@ -2876,10 +2902,16 @@ static int virtnet_probe(struct virtio_device *vdev)
virtnet_init_settings(dev);
+ if (virtio_has_feature(vdev, VIRTIO_NET_F_STANDBY)) {
+ vi->failover = net_failover_create(vi->dev);
+ if (IS_ERR(vi->failover))
+ goto free_vqs;
+ }
+
err = register_netdev(dev);
if (err) {
pr_debug("virtio_net: registering device failed\n");
- goto free_vqs;
+ goto free_failover;
}
virtio_device_ready(vdev);
@@ -2916,6 +2948,8 @@ static int virtnet_probe(struct virtio_device *vdev)
vi->vdev->config->reset(vdev);
unregister_netdev(dev);
+free_failover:
+ net_failover_destroy(vi->failover);
free_vqs:
cancel_delayed_work_sync(&vi->refill);
free_receive_page_frags(vi);
@@ -2950,6 +2984,8 @@ static void virtnet_remove(struct virtio_device *vdev)
unregister_netdev(vi->dev);
+ net_failover_destroy(vi->failover);
+
remove_vq_common(vi);
free_netdev(vi->dev);
--
2.14.3
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.