* [PATCH v7 12/12] Add maintainers for the PECI subsystem
From: Jae Hyun Yoo @ 2018-07-23 21:47 UTC (permalink / raw)
To: Jean Delvare, Guenter Roeck, Rob Herring, Mark Rutland, Lee Jones,
Joel Stanley, Andrew Jeffery, Jonathan Corbet, Greg Kroah-Hartman,
Gustavo Pimentel, Kishon Vijay Abraham I, Lorenzo Pieralisi,
Darrick J . Wong, Eric Sandeen, Arnd Bergmann, Wu Hao,
Tomohiro Kusumi, Bryant G . Ly, Frederic Barrat, David
Cc: linux-hwmon, devicetree, linux-kernel, linux-arm-kernel,
linux-aspeed, linux-doc, openbmc, Jae Hyun Yoo, Linus Walleij,
Jason M Biils
In-Reply-To: <20180723214751.1733-1-jae.hyun.yoo@linux.intel.com>
This commit adds maintainer information for the PECI subsystem.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Reviewed-by: James Feist <james.feist@linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
---
MAINTAINERS | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 7afb9ad5a85c..28a87cb77723 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1266,6 +1266,14 @@ F: arch/arm/mach-aspeed/
F: arch/arm/boot/dts/aspeed-*
N: aspeed
+ARM/ASPEED PECI DRIVER
+M: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
+M: Jason M Biils <jason.m.bills@linux.intel.com>
+L: linux-aspeed@lists.ozlabs.org (moderated for non-subscribers)
+S: Maintained
+F: Documentation/devicetree/bindings/peci/peci-aspeed.txt
+F: drivers/peci/peci-aspeed.c
+
ARM/CALXEDA HIGHBANK ARCHITECTURE
M: Rob Herring <robh@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -11254,6 +11262,19 @@ L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/peaq-wmi.c
+PECI SUBSYSTEM
+M: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
+M: Jason M Biils <jason.m.bills@linux.intel.com>
+L: openbmc@lists.ozlabs.org (moderated for non-subscribers)
+S: Maintained
+F: Documentation/devicetree/bindings/peci/
+F: drivers/mfd/intel-peci-client.c
+F: drivers/peci/
+F: drivers/hwmon/peci-*.c
+F: include/linux/mfd/intel-peci-client.h
+F: include/linux/peci.h
+F: include/uapi/linux/peci-ioctl.h
+
PER-CPU MEMORY ALLOCATOR
M: Tejun Heo <tj@kernel.org>
M: Christoph Lameter <cl@linux.com>
--
2.18.0
^ permalink raw reply related
* [PATCH v7 12/12] Add maintainers for the PECI subsystem
From: Jae Hyun Yoo @ 2018-07-23 21:47 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180723214751.1733-1-jae.hyun.yoo@linux.intel.com>
This commit adds maintainer information for the PECI subsystem.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Reviewed-by: James Feist <james.feist@linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
---
MAINTAINERS | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 7afb9ad5a85c..28a87cb77723 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1266,6 +1266,14 @@ F: arch/arm/mach-aspeed/
F: arch/arm/boot/dts/aspeed-*
N: aspeed
+ARM/ASPEED PECI DRIVER
+M: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
+M: Jason M Biils <jason.m.bills@linux.intel.com>
+L: linux-aspeed at lists.ozlabs.org (moderated for non-subscribers)
+S: Maintained
+F: Documentation/devicetree/bindings/peci/peci-aspeed.txt
+F: drivers/peci/peci-aspeed.c
+
ARM/CALXEDA HIGHBANK ARCHITECTURE
M: Rob Herring <robh@kernel.org>
L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
@@ -11254,6 +11262,19 @@ L: platform-driver-x86 at vger.kernel.org
S: Maintained
F: drivers/platform/x86/peaq-wmi.c
+PECI SUBSYSTEM
+M: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
+M: Jason M Biils <jason.m.bills@linux.intel.com>
+L: openbmc at lists.ozlabs.org (moderated for non-subscribers)
+S: Maintained
+F: Documentation/devicetree/bindings/peci/
+F: drivers/mfd/intel-peci-client.c
+F: drivers/peci/
+F: drivers/hwmon/peci-*.c
+F: include/linux/mfd/intel-peci-client.h
+F: include/linux/peci.h
+F: include/uapi/linux/peci-ioctl.h
+
PER-CPU MEMORY ALLOCATOR
M: Tejun Heo <tj@kernel.org>
M: Christoph Lameter <cl@linux.com>
--
2.18.0
^ permalink raw reply related
* [PATCH v7 12/12] Add maintainers for the PECI subsystem
From: Jae Hyun Yoo @ 2018-07-23 21:47 UTC (permalink / raw)
To: linux-aspeed
In-Reply-To: <20180723214751.1733-1-jae.hyun.yoo@linux.intel.com>
This commit adds maintainer information for the PECI subsystem.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Reviewed-by: James Feist <james.feist@linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
---
MAINTAINERS | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 7afb9ad5a85c..28a87cb77723 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1266,6 +1266,14 @@ F: arch/arm/mach-aspeed/
F: arch/arm/boot/dts/aspeed-*
N: aspeed
+ARM/ASPEED PECI DRIVER
+M: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
+M: Jason M Biils <jason.m.bills@linux.intel.com>
+L: linux-aspeed at lists.ozlabs.org (moderated for non-subscribers)
+S: Maintained
+F: Documentation/devicetree/bindings/peci/peci-aspeed.txt
+F: drivers/peci/peci-aspeed.c
+
ARM/CALXEDA HIGHBANK ARCHITECTURE
M: Rob Herring <robh@kernel.org>
L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
@@ -11254,6 +11262,19 @@ L: platform-driver-x86 at vger.kernel.org
S: Maintained
F: drivers/platform/x86/peaq-wmi.c
+PECI SUBSYSTEM
+M: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
+M: Jason M Biils <jason.m.bills@linux.intel.com>
+L: openbmc at lists.ozlabs.org (moderated for non-subscribers)
+S: Maintained
+F: Documentation/devicetree/bindings/peci/
+F: drivers/mfd/intel-peci-client.c
+F: drivers/peci/
+F: drivers/hwmon/peci-*.c
+F: include/linux/mfd/intel-peci-client.h
+F: include/linux/peci.h
+F: include/uapi/linux/peci-ioctl.h
+
PER-CPU MEMORY ALLOCATOR
M: Tejun Heo <tj@kernel.org>
M: Christoph Lameter <cl@linux.com>
--
2.18.0
^ permalink raw reply related
* [PATCH v7 11/12] hwmon: Add PECI dimmtemp driver
From: Jae Hyun Yoo @ 2018-07-23 21:47 UTC (permalink / raw)
To: Jean Delvare, Guenter Roeck, Rob Herring, Mark Rutland, Lee Jones,
Joel Stanley, Andrew Jeffery, Jonathan Corbet, Greg Kroah-Hartman,
Gustavo Pimentel, Kishon Vijay Abraham I, Lorenzo Pieralisi,
Darrick J . Wong, Eric Sandeen, Arnd Bergmann, Wu Hao,
Tomohiro Kusumi, Bryant G . Ly, Frederic Barrat, David
Cc: linux-hwmon, devicetree, linux-kernel, linux-arm-kernel,
linux-aspeed, linux-doc, openbmc, Jae Hyun Yoo, Alan Cox,
Andy Shevchenko, Jason M Biils, Miguel Ojeda, Andrew Lunn,
Stef van Os
In-Reply-To: <20180723214751.1733-1-jae.hyun.yoo@linux.intel.com>
This commit adds PECI dimmtemp hwmon driver.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Reviewed-by: James Feist <james.feist@linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Stef van Os <stef.van.os@prodrive-technologies.com>
---
drivers/hwmon/Kconfig | 14 ++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/peci-dimmtemp.c | 295 ++++++++++++++++++++++++++++++++++
3 files changed, 310 insertions(+)
create mode 100644 drivers/hwmon/peci-dimmtemp.c
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index f08b4a670ac5..d2299d850508 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1320,6 +1320,20 @@ config SENSORS_PECI_CPUTEMP
This driver can also be built as a module. If so, the module
will be called peci-cputemp.
+config SENSORS_PECI_DIMMTEMP
+ tristate "PECI DIMM temperature monitoring support"
+ depends on PECI
+ select MFD_INTEL_PECI_CLIENT
+ help
+ If you say yes here you get support for the generic Intel PECI hwmon
+ driver which provides Digital Thermal Sensor (DTS) thermal readings of
+ DIMM components that are accessible using the PECI Client Command
+ Suite via the processor PECI client.
+ Check Documentation/hwmon/peci-dimmtemp for details.
+
+ This driver can also be built as a module. If so, the module
+ will be called peci-dimmtemp.
+
source drivers/hwmon/pmbus/Kconfig
config SENSORS_PWM_FAN
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 13ebde089ad5..b7cf35bcfbaf 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -142,6 +142,7 @@ obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
obj-$(CONFIG_SENSORS_PECI_CPUTEMP) += peci-cputemp.o
+obj-$(CONFIG_SENSORS_PECI_DIMMTEMP) += peci-dimmtemp.o
obj-$(CONFIG_SENSORS_POWR1220) += powr1220.o
obj-$(CONFIG_SENSORS_PWM_FAN) += pwm-fan.o
obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON) += raspberrypi-hwmon.o
diff --git a/drivers/hwmon/peci-dimmtemp.c b/drivers/hwmon/peci-dimmtemp.c
new file mode 100644
index 000000000000..b098cb483b21
--- /dev/null
+++ b/drivers/hwmon/peci-dimmtemp.c
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Intel Corporation
+
+#include <linux/hwmon.h>
+#include <linux/jiffies.h>
+#include <linux/mfd/intel-peci-client.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+
+#define DIMM_MASK_CHECK_DELAY_JIFFIES msecs_to_jiffies(5000)
+#define DIMM_MASK_CHECK_RETRY_MAX 60 /* 60 x 5 secs = 5 minutes */
+
+struct peci_dimmtemp {
+ struct peci_mfd *mfd;
+ struct device *dev;
+ char name[PECI_NAME_SIZE];
+ u8 addr;
+ const struct cpu_gen_info *gen_info;
+ struct workqueue_struct *work_queue;
+ struct delayed_work work_handler;
+ struct temp_data temp[DIMM_NUMS_MAX];
+ u32 dimm_mask;
+ int retry_count;
+ u32 temp_config[DIMM_NUMS_MAX + 1];
+ struct hwmon_channel_info temp_info;
+ const struct hwmon_channel_info *info[2];
+ struct hwmon_chip_info chip;
+};
+
+static const char *dimmtemp_label[CHAN_RANK_MAX][DIMM_IDX_MAX] = {
+ { "DIMM A1", "DIMM A2", "DIMM A3" },
+ { "DIMM B1", "DIMM B2", "DIMM B3" },
+ { "DIMM C1", "DIMM C2", "DIMM C3" },
+ { "DIMM D1", "DIMM D2", "DIMM D3" },
+ { "DIMM E1", "DIMM E2", "DIMM E3" },
+ { "DIMM F1", "DIMM F2", "DIMM F3" },
+ { "DIMM G1", "DIMM G2", "DIMM G3" },
+ { "DIMM H1", "DIMM H2", "DIMM H3" },
+};
+
+static int get_dimm_temp(struct peci_dimmtemp *priv, int dimm_no)
+{
+ int dimm_order = dimm_no % priv->gen_info->dimm_idx_max;
+ int chan_rank = dimm_no / priv->gen_info->dimm_idx_max;
+ u8 cfg_data[4];
+ int rc;
+
+ if (!peci_temp_need_update(&priv->temp[dimm_no]))
+ return 0;
+
+ rc = peci_client_rd_pkg_cfg_cmd(priv->mfd, MBX_INDEX_DDR_DIMM_TEMP,
+ chan_rank, cfg_data);
+ if (rc)
+ return rc;
+
+ priv->temp[dimm_no].value = cfg_data[dimm_order] * 1000;
+
+ peci_temp_mark_updated(&priv->temp[dimm_no]);
+
+ return 0;
+}
+
+static int dimmtemp_read_string(struct device *dev,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel, const char **str)
+{
+ struct peci_dimmtemp *priv = dev_get_drvdata(dev);
+ u32 dimm_idx_max = priv->gen_info->dimm_idx_max;
+ int chan_rank, dimm_idx;
+
+ if (attr != hwmon_temp_label)
+ return -EOPNOTSUPP;
+
+ chan_rank = channel / dimm_idx_max;
+ dimm_idx = channel % dimm_idx_max;
+ *str = dimmtemp_label[chan_rank][dimm_idx];
+ return 0;
+}
+
+static int dimmtemp_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct peci_dimmtemp *priv = dev_get_drvdata(dev);
+ int rc;
+
+ if (attr != hwmon_temp_input)
+ return -EOPNOTSUPP;
+
+ rc = get_dimm_temp(priv, channel);
+ if (rc)
+ return rc;
+
+ *val = priv->temp[channel].value;
+ return 0;
+}
+
+static umode_t dimmtemp_is_visible(const void *data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ const struct peci_dimmtemp *priv = data;
+
+ if (priv->temp_config[channel] & BIT(attr) &&
+ priv->dimm_mask & BIT(channel))
+ return 0444;
+
+ return 0;
+}
+
+static const struct hwmon_ops dimmtemp_ops = {
+ .is_visible = dimmtemp_is_visible,
+ .read_string = dimmtemp_read_string,
+ .read = dimmtemp_read,
+};
+
+static int check_populated_dimms(struct peci_dimmtemp *priv)
+{
+ u32 chan_rank_max = priv->gen_info->chan_rank_max;
+ u32 dimm_idx_max = priv->gen_info->dimm_idx_max;
+ int chan_rank, dimm_idx, rc;
+ u8 cfg_data[4];
+
+ for (chan_rank = 0; chan_rank < chan_rank_max; chan_rank++) {
+ rc = peci_client_rd_pkg_cfg_cmd(priv->mfd,
+ MBX_INDEX_DDR_DIMM_TEMP,
+ chan_rank, cfg_data);
+ if (rc) {
+ priv->dimm_mask = 0;
+ return rc;
+ }
+
+ for (dimm_idx = 0; dimm_idx < dimm_idx_max; dimm_idx++)
+ if (cfg_data[dimm_idx])
+ priv->dimm_mask |= BIT(chan_rank *
+ dimm_idx_max +
+ dimm_idx);
+ }
+
+ if (!priv->dimm_mask)
+ return -EAGAIN;
+
+ dev_dbg(priv->dev, "Scanned populated DIMMs: 0x%x\n", priv->dimm_mask);
+ return 0;
+}
+
+static int create_dimm_temp_info(struct peci_dimmtemp *priv)
+{
+ int rc, i, config_idx, channels;
+ struct device *hwmon_dev;
+
+ rc = check_populated_dimms(priv);
+ if (rc) {
+ if (rc == -EAGAIN) {
+ if (priv->retry_count < DIMM_MASK_CHECK_RETRY_MAX) {
+ queue_delayed_work(priv->work_queue,
+ &priv->work_handler,
+ DIMM_MASK_CHECK_DELAY_JIFFIES);
+ priv->retry_count++;
+ dev_dbg(priv->dev,
+ "Deferred DIMM temp info creation\n");
+ } else {
+ dev_err(priv->dev,
+ "Timeout DIMM temp info creation\n");
+ rc = -ETIMEDOUT;
+ }
+ }
+
+ return rc;
+ }
+
+ channels = priv->gen_info->chan_rank_max *
+ priv->gen_info->dimm_idx_max;
+ for (i = 0, config_idx = 0; i < channels; i++)
+ if (priv->dimm_mask & BIT(i))
+ while (i >= config_idx)
+ priv->temp_config[config_idx++] =
+ HWMON_T_LABEL | HWMON_T_INPUT;
+
+ priv->chip.ops = &dimmtemp_ops;
+ priv->chip.info = priv->info;
+
+ priv->info[0] = &priv->temp_info;
+
+ priv->temp_info.type = hwmon_temp;
+ priv->temp_info.config = priv->temp_config;
+
+ hwmon_dev = devm_hwmon_device_register_with_info(priv->dev,
+ priv->name,
+ priv,
+ &priv->chip,
+ NULL);
+ rc = PTR_ERR_OR_ZERO(hwmon_dev);
+ if (!rc)
+ dev_dbg(priv->dev, "%s: sensor '%s'\n",
+ dev_name(hwmon_dev), priv->name);
+
+ return rc;
+}
+
+static void create_dimm_temp_info_delayed(struct work_struct *work)
+{
+ struct delayed_work *dwork = to_delayed_work(work);
+ struct peci_dimmtemp *priv = container_of(dwork, struct peci_dimmtemp,
+ work_handler);
+ int rc;
+
+ rc = create_dimm_temp_info(priv);
+ if (rc && rc != -EAGAIN)
+ dev_dbg(priv->dev, "Failed to create DIMM temp info\n");
+}
+
+static int peci_dimmtemp_probe(struct platform_device *pdev)
+{
+ struct peci_mfd *mfd = dev_get_drvdata(pdev->dev.parent);
+ struct device *dev = &pdev->dev;
+ struct peci_dimmtemp *priv;
+ int rc;
+
+ if ((mfd->adapter->cmd_mask &
+ (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG))) !=
+ (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG)))
+ return -ENODEV;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, priv);
+ priv->mfd = mfd;
+ priv->dev = dev;
+ priv->addr = mfd->addr;
+ priv->gen_info = mfd->gen_info;
+
+ snprintf(priv->name, PECI_NAME_SIZE, "peci_dimmtemp.cpu%d",
+ priv->mfd->cpu_no);
+
+ priv->work_queue = alloc_ordered_workqueue(priv->name, 0);
+ if (!priv->work_queue)
+ return -ENOMEM;
+
+ INIT_DELAYED_WORK(&priv->work_handler, create_dimm_temp_info_delayed);
+
+ rc = create_dimm_temp_info(priv);
+ if (rc && rc != -EAGAIN) {
+ dev_err(dev, "Failed to create DIMM temp info\n");
+ goto err_free_wq;
+ }
+
+ return 0;
+
+err_free_wq:
+ destroy_workqueue(priv->work_queue);
+ return rc;
+}
+
+static int peci_dimmtemp_remove(struct platform_device *pdev)
+{
+ struct peci_dimmtemp *priv = dev_get_drvdata(&pdev->dev);
+
+ cancel_delayed_work_sync(&priv->work_handler);
+ destroy_workqueue(priv->work_queue);
+
+ return 0;
+}
+
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id peci_dimmtemp_of_table[] = {
+ { .compatible = "intel,peci-dimmtemp" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, peci_dimmtemp_of_table);
+#endif
+
+static const struct platform_device_id peci_dimmtemp_ids[] = {
+ { .name = "peci-dimmtemp", .driver_data = 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, peci_dimmtemp_ids);
+
+static struct platform_driver peci_dimmtemp_driver = {
+ .probe = peci_dimmtemp_probe,
+ .remove = peci_dimmtemp_remove,
+ .id_table = peci_dimmtemp_ids,
+ .driver = {
+ .name = "peci-dimmtemp",
+ .of_match_table = of_match_ptr(peci_dimmtemp_of_table),
+ },
+};
+module_platform_driver(peci_dimmtemp_driver);
+
+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");
+MODULE_DESCRIPTION("PECI dimmtemp driver");
+MODULE_LICENSE("GPL v2");
--
2.18.0
^ permalink raw reply related
* [PATCH v7 11/12] hwmon: Add PECI dimmtemp driver
From: Jae Hyun Yoo @ 2018-07-23 21:47 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180723214751.1733-1-jae.hyun.yoo@linux.intel.com>
This commit adds PECI dimmtemp hwmon driver.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Reviewed-by: James Feist <james.feist@linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Stef van Os <stef.van.os@prodrive-technologies.com>
---
drivers/hwmon/Kconfig | 14 ++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/peci-dimmtemp.c | 295 ++++++++++++++++++++++++++++++++++
3 files changed, 310 insertions(+)
create mode 100644 drivers/hwmon/peci-dimmtemp.c
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index f08b4a670ac5..d2299d850508 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1320,6 +1320,20 @@ config SENSORS_PECI_CPUTEMP
This driver can also be built as a module. If so, the module
will be called peci-cputemp.
+config SENSORS_PECI_DIMMTEMP
+ tristate "PECI DIMM temperature monitoring support"
+ depends on PECI
+ select MFD_INTEL_PECI_CLIENT
+ help
+ If you say yes here you get support for the generic Intel PECI hwmon
+ driver which provides Digital Thermal Sensor (DTS) thermal readings of
+ DIMM components that are accessible using the PECI Client Command
+ Suite via the processor PECI client.
+ Check Documentation/hwmon/peci-dimmtemp for details.
+
+ This driver can also be built as a module. If so, the module
+ will be called peci-dimmtemp.
+
source drivers/hwmon/pmbus/Kconfig
config SENSORS_PWM_FAN
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 13ebde089ad5..b7cf35bcfbaf 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -142,6 +142,7 @@ obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
obj-$(CONFIG_SENSORS_PECI_CPUTEMP) += peci-cputemp.o
+obj-$(CONFIG_SENSORS_PECI_DIMMTEMP) += peci-dimmtemp.o
obj-$(CONFIG_SENSORS_POWR1220) += powr1220.o
obj-$(CONFIG_SENSORS_PWM_FAN) += pwm-fan.o
obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON) += raspberrypi-hwmon.o
diff --git a/drivers/hwmon/peci-dimmtemp.c b/drivers/hwmon/peci-dimmtemp.c
new file mode 100644
index 000000000000..b098cb483b21
--- /dev/null
+++ b/drivers/hwmon/peci-dimmtemp.c
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Intel Corporation
+
+#include <linux/hwmon.h>
+#include <linux/jiffies.h>
+#include <linux/mfd/intel-peci-client.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+
+#define DIMM_MASK_CHECK_DELAY_JIFFIES msecs_to_jiffies(5000)
+#define DIMM_MASK_CHECK_RETRY_MAX 60 /* 60 x 5 secs = 5 minutes */
+
+struct peci_dimmtemp {
+ struct peci_mfd *mfd;
+ struct device *dev;
+ char name[PECI_NAME_SIZE];
+ u8 addr;
+ const struct cpu_gen_info *gen_info;
+ struct workqueue_struct *work_queue;
+ struct delayed_work work_handler;
+ struct temp_data temp[DIMM_NUMS_MAX];
+ u32 dimm_mask;
+ int retry_count;
+ u32 temp_config[DIMM_NUMS_MAX + 1];
+ struct hwmon_channel_info temp_info;
+ const struct hwmon_channel_info *info[2];
+ struct hwmon_chip_info chip;
+};
+
+static const char *dimmtemp_label[CHAN_RANK_MAX][DIMM_IDX_MAX] = {
+ { "DIMM A1", "DIMM A2", "DIMM A3" },
+ { "DIMM B1", "DIMM B2", "DIMM B3" },
+ { "DIMM C1", "DIMM C2", "DIMM C3" },
+ { "DIMM D1", "DIMM D2", "DIMM D3" },
+ { "DIMM E1", "DIMM E2", "DIMM E3" },
+ { "DIMM F1", "DIMM F2", "DIMM F3" },
+ { "DIMM G1", "DIMM G2", "DIMM G3" },
+ { "DIMM H1", "DIMM H2", "DIMM H3" },
+};
+
+static int get_dimm_temp(struct peci_dimmtemp *priv, int dimm_no)
+{
+ int dimm_order = dimm_no % priv->gen_info->dimm_idx_max;
+ int chan_rank = dimm_no / priv->gen_info->dimm_idx_max;
+ u8 cfg_data[4];
+ int rc;
+
+ if (!peci_temp_need_update(&priv->temp[dimm_no]))
+ return 0;
+
+ rc = peci_client_rd_pkg_cfg_cmd(priv->mfd, MBX_INDEX_DDR_DIMM_TEMP,
+ chan_rank, cfg_data);
+ if (rc)
+ return rc;
+
+ priv->temp[dimm_no].value = cfg_data[dimm_order] * 1000;
+
+ peci_temp_mark_updated(&priv->temp[dimm_no]);
+
+ return 0;
+}
+
+static int dimmtemp_read_string(struct device *dev,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel, const char **str)
+{
+ struct peci_dimmtemp *priv = dev_get_drvdata(dev);
+ u32 dimm_idx_max = priv->gen_info->dimm_idx_max;
+ int chan_rank, dimm_idx;
+
+ if (attr != hwmon_temp_label)
+ return -EOPNOTSUPP;
+
+ chan_rank = channel / dimm_idx_max;
+ dimm_idx = channel % dimm_idx_max;
+ *str = dimmtemp_label[chan_rank][dimm_idx];
+ return 0;
+}
+
+static int dimmtemp_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct peci_dimmtemp *priv = dev_get_drvdata(dev);
+ int rc;
+
+ if (attr != hwmon_temp_input)
+ return -EOPNOTSUPP;
+
+ rc = get_dimm_temp(priv, channel);
+ if (rc)
+ return rc;
+
+ *val = priv->temp[channel].value;
+ return 0;
+}
+
+static umode_t dimmtemp_is_visible(const void *data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ const struct peci_dimmtemp *priv = data;
+
+ if (priv->temp_config[channel] & BIT(attr) &&
+ priv->dimm_mask & BIT(channel))
+ return 0444;
+
+ return 0;
+}
+
+static const struct hwmon_ops dimmtemp_ops = {
+ .is_visible = dimmtemp_is_visible,
+ .read_string = dimmtemp_read_string,
+ .read = dimmtemp_read,
+};
+
+static int check_populated_dimms(struct peci_dimmtemp *priv)
+{
+ u32 chan_rank_max = priv->gen_info->chan_rank_max;
+ u32 dimm_idx_max = priv->gen_info->dimm_idx_max;
+ int chan_rank, dimm_idx, rc;
+ u8 cfg_data[4];
+
+ for (chan_rank = 0; chan_rank < chan_rank_max; chan_rank++) {
+ rc = peci_client_rd_pkg_cfg_cmd(priv->mfd,
+ MBX_INDEX_DDR_DIMM_TEMP,
+ chan_rank, cfg_data);
+ if (rc) {
+ priv->dimm_mask = 0;
+ return rc;
+ }
+
+ for (dimm_idx = 0; dimm_idx < dimm_idx_max; dimm_idx++)
+ if (cfg_data[dimm_idx])
+ priv->dimm_mask |= BIT(chan_rank *
+ dimm_idx_max +
+ dimm_idx);
+ }
+
+ if (!priv->dimm_mask)
+ return -EAGAIN;
+
+ dev_dbg(priv->dev, "Scanned populated DIMMs: 0x%x\n", priv->dimm_mask);
+ return 0;
+}
+
+static int create_dimm_temp_info(struct peci_dimmtemp *priv)
+{
+ int rc, i, config_idx, channels;
+ struct device *hwmon_dev;
+
+ rc = check_populated_dimms(priv);
+ if (rc) {
+ if (rc == -EAGAIN) {
+ if (priv->retry_count < DIMM_MASK_CHECK_RETRY_MAX) {
+ queue_delayed_work(priv->work_queue,
+ &priv->work_handler,
+ DIMM_MASK_CHECK_DELAY_JIFFIES);
+ priv->retry_count++;
+ dev_dbg(priv->dev,
+ "Deferred DIMM temp info creation\n");
+ } else {
+ dev_err(priv->dev,
+ "Timeout DIMM temp info creation\n");
+ rc = -ETIMEDOUT;
+ }
+ }
+
+ return rc;
+ }
+
+ channels = priv->gen_info->chan_rank_max *
+ priv->gen_info->dimm_idx_max;
+ for (i = 0, config_idx = 0; i < channels; i++)
+ if (priv->dimm_mask & BIT(i))
+ while (i >= config_idx)
+ priv->temp_config[config_idx++] =
+ HWMON_T_LABEL | HWMON_T_INPUT;
+
+ priv->chip.ops = &dimmtemp_ops;
+ priv->chip.info = priv->info;
+
+ priv->info[0] = &priv->temp_info;
+
+ priv->temp_info.type = hwmon_temp;
+ priv->temp_info.config = priv->temp_config;
+
+ hwmon_dev = devm_hwmon_device_register_with_info(priv->dev,
+ priv->name,
+ priv,
+ &priv->chip,
+ NULL);
+ rc = PTR_ERR_OR_ZERO(hwmon_dev);
+ if (!rc)
+ dev_dbg(priv->dev, "%s: sensor '%s'\n",
+ dev_name(hwmon_dev), priv->name);
+
+ return rc;
+}
+
+static void create_dimm_temp_info_delayed(struct work_struct *work)
+{
+ struct delayed_work *dwork = to_delayed_work(work);
+ struct peci_dimmtemp *priv = container_of(dwork, struct peci_dimmtemp,
+ work_handler);
+ int rc;
+
+ rc = create_dimm_temp_info(priv);
+ if (rc && rc != -EAGAIN)
+ dev_dbg(priv->dev, "Failed to create DIMM temp info\n");
+}
+
+static int peci_dimmtemp_probe(struct platform_device *pdev)
+{
+ struct peci_mfd *mfd = dev_get_drvdata(pdev->dev.parent);
+ struct device *dev = &pdev->dev;
+ struct peci_dimmtemp *priv;
+ int rc;
+
+ if ((mfd->adapter->cmd_mask &
+ (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG))) !=
+ (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG)))
+ return -ENODEV;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, priv);
+ priv->mfd = mfd;
+ priv->dev = dev;
+ priv->addr = mfd->addr;
+ priv->gen_info = mfd->gen_info;
+
+ snprintf(priv->name, PECI_NAME_SIZE, "peci_dimmtemp.cpu%d",
+ priv->mfd->cpu_no);
+
+ priv->work_queue = alloc_ordered_workqueue(priv->name, 0);
+ if (!priv->work_queue)
+ return -ENOMEM;
+
+ INIT_DELAYED_WORK(&priv->work_handler, create_dimm_temp_info_delayed);
+
+ rc = create_dimm_temp_info(priv);
+ if (rc && rc != -EAGAIN) {
+ dev_err(dev, "Failed to create DIMM temp info\n");
+ goto err_free_wq;
+ }
+
+ return 0;
+
+err_free_wq:
+ destroy_workqueue(priv->work_queue);
+ return rc;
+}
+
+static int peci_dimmtemp_remove(struct platform_device *pdev)
+{
+ struct peci_dimmtemp *priv = dev_get_drvdata(&pdev->dev);
+
+ cancel_delayed_work_sync(&priv->work_handler);
+ destroy_workqueue(priv->work_queue);
+
+ return 0;
+}
+
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id peci_dimmtemp_of_table[] = {
+ { .compatible = "intel,peci-dimmtemp" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, peci_dimmtemp_of_table);
+#endif
+
+static const struct platform_device_id peci_dimmtemp_ids[] = {
+ { .name = "peci-dimmtemp", .driver_data = 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, peci_dimmtemp_ids);
+
+static struct platform_driver peci_dimmtemp_driver = {
+ .probe = peci_dimmtemp_probe,
+ .remove = peci_dimmtemp_remove,
+ .id_table = peci_dimmtemp_ids,
+ .driver = {
+ .name = "peci-dimmtemp",
+ .of_match_table = of_match_ptr(peci_dimmtemp_of_table),
+ },
+};
+module_platform_driver(peci_dimmtemp_driver);
+
+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");
+MODULE_DESCRIPTION("PECI dimmtemp driver");
+MODULE_LICENSE("GPL v2");
--
2.18.0
^ permalink raw reply related
* [PATCH v7 11/12] hwmon: Add PECI dimmtemp driver
From: Jae Hyun Yoo @ 2018-07-23 21:47 UTC (permalink / raw)
To: Jean Delvare, Guenter Roeck, Rob Herring, Mark Rutland, Lee Jones,
Joel Stanley, Andrew Jeffery, Jonathan Corbet, Greg Kroah-Hartman,
Gustavo Pimentel, Kishon Vijay Abraham I, Lorenzo Pieralisi,
Darrick J . Wong, Eric Sandeen, Arnd Bergmann, Wu Hao,
Tomohiro Kusumi, Bryant G . Ly, Frederic Barrat, David S . Miller,
Mauro Carvalho Chehab, Andrew Morton, Randy Dunlap,
Philippe Ombredanne, Vinod Koul, Stephen Boyd, David Kershner,
Uwe Kleine-Konig, Sagar Dharia, Johan Hovold, Thomas Gleixner,
Juergen Gross, Cyrille Pitchen
Cc: linux-hwmon, devicetree, linux-kernel, linux-arm-kernel,
linux-aspeed, linux-doc, openbmc, Jae Hyun Yoo, Alan Cox,
Andy Shevchenko, Jason M Biils, Miguel Ojeda, Andrew Lunn,
Stef van Os
In-Reply-To: <20180723214751.1733-1-jae.hyun.yoo@linux.intel.com>
This commit adds PECI dimmtemp hwmon driver.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Reviewed-by: James Feist <james.feist@linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Stef van Os <stef.van.os@prodrive-technologies.com>
---
drivers/hwmon/Kconfig | 14 ++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/peci-dimmtemp.c | 295 ++++++++++++++++++++++++++++++++++
3 files changed, 310 insertions(+)
create mode 100644 drivers/hwmon/peci-dimmtemp.c
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index f08b4a670ac5..d2299d850508 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1320,6 +1320,20 @@ config SENSORS_PECI_CPUTEMP
This driver can also be built as a module. If so, the module
will be called peci-cputemp.
+config SENSORS_PECI_DIMMTEMP
+ tristate "PECI DIMM temperature monitoring support"
+ depends on PECI
+ select MFD_INTEL_PECI_CLIENT
+ help
+ If you say yes here you get support for the generic Intel PECI hwmon
+ driver which provides Digital Thermal Sensor (DTS) thermal readings of
+ DIMM components that are accessible using the PECI Client Command
+ Suite via the processor PECI client.
+ Check Documentation/hwmon/peci-dimmtemp for details.
+
+ This driver can also be built as a module. If so, the module
+ will be called peci-dimmtemp.
+
source drivers/hwmon/pmbus/Kconfig
config SENSORS_PWM_FAN
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 13ebde089ad5..b7cf35bcfbaf 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -142,6 +142,7 @@ obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
obj-$(CONFIG_SENSORS_PECI_CPUTEMP) += peci-cputemp.o
+obj-$(CONFIG_SENSORS_PECI_DIMMTEMP) += peci-dimmtemp.o
obj-$(CONFIG_SENSORS_POWR1220) += powr1220.o
obj-$(CONFIG_SENSORS_PWM_FAN) += pwm-fan.o
obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON) += raspberrypi-hwmon.o
diff --git a/drivers/hwmon/peci-dimmtemp.c b/drivers/hwmon/peci-dimmtemp.c
new file mode 100644
index 000000000000..b098cb483b21
--- /dev/null
+++ b/drivers/hwmon/peci-dimmtemp.c
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Intel Corporation
+
+#include <linux/hwmon.h>
+#include <linux/jiffies.h>
+#include <linux/mfd/intel-peci-client.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+
+#define DIMM_MASK_CHECK_DELAY_JIFFIES msecs_to_jiffies(5000)
+#define DIMM_MASK_CHECK_RETRY_MAX 60 /* 60 x 5 secs = 5 minutes */
+
+struct peci_dimmtemp {
+ struct peci_mfd *mfd;
+ struct device *dev;
+ char name[PECI_NAME_SIZE];
+ u8 addr;
+ const struct cpu_gen_info *gen_info;
+ struct workqueue_struct *work_queue;
+ struct delayed_work work_handler;
+ struct temp_data temp[DIMM_NUMS_MAX];
+ u32 dimm_mask;
+ int retry_count;
+ u32 temp_config[DIMM_NUMS_MAX + 1];
+ struct hwmon_channel_info temp_info;
+ const struct hwmon_channel_info *info[2];
+ struct hwmon_chip_info chip;
+};
+
+static const char *dimmtemp_label[CHAN_RANK_MAX][DIMM_IDX_MAX] = {
+ { "DIMM A1", "DIMM A2", "DIMM A3" },
+ { "DIMM B1", "DIMM B2", "DIMM B3" },
+ { "DIMM C1", "DIMM C2", "DIMM C3" },
+ { "DIMM D1", "DIMM D2", "DIMM D3" },
+ { "DIMM E1", "DIMM E2", "DIMM E3" },
+ { "DIMM F1", "DIMM F2", "DIMM F3" },
+ { "DIMM G1", "DIMM G2", "DIMM G3" },
+ { "DIMM H1", "DIMM H2", "DIMM H3" },
+};
+
+static int get_dimm_temp(struct peci_dimmtemp *priv, int dimm_no)
+{
+ int dimm_order = dimm_no % priv->gen_info->dimm_idx_max;
+ int chan_rank = dimm_no / priv->gen_info->dimm_idx_max;
+ u8 cfg_data[4];
+ int rc;
+
+ if (!peci_temp_need_update(&priv->temp[dimm_no]))
+ return 0;
+
+ rc = peci_client_rd_pkg_cfg_cmd(priv->mfd, MBX_INDEX_DDR_DIMM_TEMP,
+ chan_rank, cfg_data);
+ if (rc)
+ return rc;
+
+ priv->temp[dimm_no].value = cfg_data[dimm_order] * 1000;
+
+ peci_temp_mark_updated(&priv->temp[dimm_no]);
+
+ return 0;
+}
+
+static int dimmtemp_read_string(struct device *dev,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel, const char **str)
+{
+ struct peci_dimmtemp *priv = dev_get_drvdata(dev);
+ u32 dimm_idx_max = priv->gen_info->dimm_idx_max;
+ int chan_rank, dimm_idx;
+
+ if (attr != hwmon_temp_label)
+ return -EOPNOTSUPP;
+
+ chan_rank = channel / dimm_idx_max;
+ dimm_idx = channel % dimm_idx_max;
+ *str = dimmtemp_label[chan_rank][dimm_idx];
+ return 0;
+}
+
+static int dimmtemp_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct peci_dimmtemp *priv = dev_get_drvdata(dev);
+ int rc;
+
+ if (attr != hwmon_temp_input)
+ return -EOPNOTSUPP;
+
+ rc = get_dimm_temp(priv, channel);
+ if (rc)
+ return rc;
+
+ *val = priv->temp[channel].value;
+ return 0;
+}
+
+static umode_t dimmtemp_is_visible(const void *data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ const struct peci_dimmtemp *priv = data;
+
+ if (priv->temp_config[channel] & BIT(attr) &&
+ priv->dimm_mask & BIT(channel))
+ return 0444;
+
+ return 0;
+}
+
+static const struct hwmon_ops dimmtemp_ops = {
+ .is_visible = dimmtemp_is_visible,
+ .read_string = dimmtemp_read_string,
+ .read = dimmtemp_read,
+};
+
+static int check_populated_dimms(struct peci_dimmtemp *priv)
+{
+ u32 chan_rank_max = priv->gen_info->chan_rank_max;
+ u32 dimm_idx_max = priv->gen_info->dimm_idx_max;
+ int chan_rank, dimm_idx, rc;
+ u8 cfg_data[4];
+
+ for (chan_rank = 0; chan_rank < chan_rank_max; chan_rank++) {
+ rc = peci_client_rd_pkg_cfg_cmd(priv->mfd,
+ MBX_INDEX_DDR_DIMM_TEMP,
+ chan_rank, cfg_data);
+ if (rc) {
+ priv->dimm_mask = 0;
+ return rc;
+ }
+
+ for (dimm_idx = 0; dimm_idx < dimm_idx_max; dimm_idx++)
+ if (cfg_data[dimm_idx])
+ priv->dimm_mask |= BIT(chan_rank *
+ dimm_idx_max +
+ dimm_idx);
+ }
+
+ if (!priv->dimm_mask)
+ return -EAGAIN;
+
+ dev_dbg(priv->dev, "Scanned populated DIMMs: 0x%x\n", priv->dimm_mask);
+ return 0;
+}
+
+static int create_dimm_temp_info(struct peci_dimmtemp *priv)
+{
+ int rc, i, config_idx, channels;
+ struct device *hwmon_dev;
+
+ rc = check_populated_dimms(priv);
+ if (rc) {
+ if (rc == -EAGAIN) {
+ if (priv->retry_count < DIMM_MASK_CHECK_RETRY_MAX) {
+ queue_delayed_work(priv->work_queue,
+ &priv->work_handler,
+ DIMM_MASK_CHECK_DELAY_JIFFIES);
+ priv->retry_count++;
+ dev_dbg(priv->dev,
+ "Deferred DIMM temp info creation\n");
+ } else {
+ dev_err(priv->dev,
+ "Timeout DIMM temp info creation\n");
+ rc = -ETIMEDOUT;
+ }
+ }
+
+ return rc;
+ }
+
+ channels = priv->gen_info->chan_rank_max *
+ priv->gen_info->dimm_idx_max;
+ for (i = 0, config_idx = 0; i < channels; i++)
+ if (priv->dimm_mask & BIT(i))
+ while (i >= config_idx)
+ priv->temp_config[config_idx++] =
+ HWMON_T_LABEL | HWMON_T_INPUT;
+
+ priv->chip.ops = &dimmtemp_ops;
+ priv->chip.info = priv->info;
+
+ priv->info[0] = &priv->temp_info;
+
+ priv->temp_info.type = hwmon_temp;
+ priv->temp_info.config = priv->temp_config;
+
+ hwmon_dev = devm_hwmon_device_register_with_info(priv->dev,
+ priv->name,
+ priv,
+ &priv->chip,
+ NULL);
+ rc = PTR_ERR_OR_ZERO(hwmon_dev);
+ if (!rc)
+ dev_dbg(priv->dev, "%s: sensor '%s'\n",
+ dev_name(hwmon_dev), priv->name);
+
+ return rc;
+}
+
+static void create_dimm_temp_info_delayed(struct work_struct *work)
+{
+ struct delayed_work *dwork = to_delayed_work(work);
+ struct peci_dimmtemp *priv = container_of(dwork, struct peci_dimmtemp,
+ work_handler);
+ int rc;
+
+ rc = create_dimm_temp_info(priv);
+ if (rc && rc != -EAGAIN)
+ dev_dbg(priv->dev, "Failed to create DIMM temp info\n");
+}
+
+static int peci_dimmtemp_probe(struct platform_device *pdev)
+{
+ struct peci_mfd *mfd = dev_get_drvdata(pdev->dev.parent);
+ struct device *dev = &pdev->dev;
+ struct peci_dimmtemp *priv;
+ int rc;
+
+ if ((mfd->adapter->cmd_mask &
+ (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG))) !=
+ (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG)))
+ return -ENODEV;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, priv);
+ priv->mfd = mfd;
+ priv->dev = dev;
+ priv->addr = mfd->addr;
+ priv->gen_info = mfd->gen_info;
+
+ snprintf(priv->name, PECI_NAME_SIZE, "peci_dimmtemp.cpu%d",
+ priv->mfd->cpu_no);
+
+ priv->work_queue = alloc_ordered_workqueue(priv->name, 0);
+ if (!priv->work_queue)
+ return -ENOMEM;
+
+ INIT_DELAYED_WORK(&priv->work_handler, create_dimm_temp_info_delayed);
+
+ rc = create_dimm_temp_info(priv);
+ if (rc && rc != -EAGAIN) {
+ dev_err(dev, "Failed to create DIMM temp info\n");
+ goto err_free_wq;
+ }
+
+ return 0;
+
+err_free_wq:
+ destroy_workqueue(priv->work_queue);
+ return rc;
+}
+
+static int peci_dimmtemp_remove(struct platform_device *pdev)
+{
+ struct peci_dimmtemp *priv = dev_get_drvdata(&pdev->dev);
+
+ cancel_delayed_work_sync(&priv->work_handler);
+ destroy_workqueue(priv->work_queue);
+
+ return 0;
+}
+
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id peci_dimmtemp_of_table[] = {
+ { .compatible = "intel,peci-dimmtemp" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, peci_dimmtemp_of_table);
+#endif
+
+static const struct platform_device_id peci_dimmtemp_ids[] = {
+ { .name = "peci-dimmtemp", .driver_data = 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, peci_dimmtemp_ids);
+
+static struct platform_driver peci_dimmtemp_driver = {
+ .probe = peci_dimmtemp_probe,
+ .remove = peci_dimmtemp_remove,
+ .id_table = peci_dimmtemp_ids,
+ .driver = {
+ .name = "peci-dimmtemp",
+ .of_match_table = of_match_ptr(peci_dimmtemp_of_table),
+ },
+};
+module_platform_driver(peci_dimmtemp_driver);
+
+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");
+MODULE_DESCRIPTION("PECI dimmtemp driver");
+MODULE_LICENSE("GPL v2");
--
2.18.0
^ permalink raw reply related
* [PATCH v7 11/12] hwmon: Add PECI dimmtemp driver
From: Jae Hyun Yoo @ 2018-07-23 21:47 UTC (permalink / raw)
To: linux-aspeed
In-Reply-To: <20180723214751.1733-1-jae.hyun.yoo@linux.intel.com>
This commit adds PECI dimmtemp hwmon driver.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Reviewed-by: James Feist <james.feist@linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Stef van Os <stef.van.os@prodrive-technologies.com>
---
drivers/hwmon/Kconfig | 14 ++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/peci-dimmtemp.c | 295 ++++++++++++++++++++++++++++++++++
3 files changed, 310 insertions(+)
create mode 100644 drivers/hwmon/peci-dimmtemp.c
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index f08b4a670ac5..d2299d850508 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1320,6 +1320,20 @@ config SENSORS_PECI_CPUTEMP
This driver can also be built as a module. If so, the module
will be called peci-cputemp.
+config SENSORS_PECI_DIMMTEMP
+ tristate "PECI DIMM temperature monitoring support"
+ depends on PECI
+ select MFD_INTEL_PECI_CLIENT
+ help
+ If you say yes here you get support for the generic Intel PECI hwmon
+ driver which provides Digital Thermal Sensor (DTS) thermal readings of
+ DIMM components that are accessible using the PECI Client Command
+ Suite via the processor PECI client.
+ Check Documentation/hwmon/peci-dimmtemp for details.
+
+ This driver can also be built as a module. If so, the module
+ will be called peci-dimmtemp.
+
source drivers/hwmon/pmbus/Kconfig
config SENSORS_PWM_FAN
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 13ebde089ad5..b7cf35bcfbaf 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -142,6 +142,7 @@ obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
obj-$(CONFIG_SENSORS_PECI_CPUTEMP) += peci-cputemp.o
+obj-$(CONFIG_SENSORS_PECI_DIMMTEMP) += peci-dimmtemp.o
obj-$(CONFIG_SENSORS_POWR1220) += powr1220.o
obj-$(CONFIG_SENSORS_PWM_FAN) += pwm-fan.o
obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON) += raspberrypi-hwmon.o
diff --git a/drivers/hwmon/peci-dimmtemp.c b/drivers/hwmon/peci-dimmtemp.c
new file mode 100644
index 000000000000..b098cb483b21
--- /dev/null
+++ b/drivers/hwmon/peci-dimmtemp.c
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Intel Corporation
+
+#include <linux/hwmon.h>
+#include <linux/jiffies.h>
+#include <linux/mfd/intel-peci-client.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+
+#define DIMM_MASK_CHECK_DELAY_JIFFIES msecs_to_jiffies(5000)
+#define DIMM_MASK_CHECK_RETRY_MAX 60 /* 60 x 5 secs = 5 minutes */
+
+struct peci_dimmtemp {
+ struct peci_mfd *mfd;
+ struct device *dev;
+ char name[PECI_NAME_SIZE];
+ u8 addr;
+ const struct cpu_gen_info *gen_info;
+ struct workqueue_struct *work_queue;
+ struct delayed_work work_handler;
+ struct temp_data temp[DIMM_NUMS_MAX];
+ u32 dimm_mask;
+ int retry_count;
+ u32 temp_config[DIMM_NUMS_MAX + 1];
+ struct hwmon_channel_info temp_info;
+ const struct hwmon_channel_info *info[2];
+ struct hwmon_chip_info chip;
+};
+
+static const char *dimmtemp_label[CHAN_RANK_MAX][DIMM_IDX_MAX] = {
+ { "DIMM A1", "DIMM A2", "DIMM A3" },
+ { "DIMM B1", "DIMM B2", "DIMM B3" },
+ { "DIMM C1", "DIMM C2", "DIMM C3" },
+ { "DIMM D1", "DIMM D2", "DIMM D3" },
+ { "DIMM E1", "DIMM E2", "DIMM E3" },
+ { "DIMM F1", "DIMM F2", "DIMM F3" },
+ { "DIMM G1", "DIMM G2", "DIMM G3" },
+ { "DIMM H1", "DIMM H2", "DIMM H3" },
+};
+
+static int get_dimm_temp(struct peci_dimmtemp *priv, int dimm_no)
+{
+ int dimm_order = dimm_no % priv->gen_info->dimm_idx_max;
+ int chan_rank = dimm_no / priv->gen_info->dimm_idx_max;
+ u8 cfg_data[4];
+ int rc;
+
+ if (!peci_temp_need_update(&priv->temp[dimm_no]))
+ return 0;
+
+ rc = peci_client_rd_pkg_cfg_cmd(priv->mfd, MBX_INDEX_DDR_DIMM_TEMP,
+ chan_rank, cfg_data);
+ if (rc)
+ return rc;
+
+ priv->temp[dimm_no].value = cfg_data[dimm_order] * 1000;
+
+ peci_temp_mark_updated(&priv->temp[dimm_no]);
+
+ return 0;
+}
+
+static int dimmtemp_read_string(struct device *dev,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel, const char **str)
+{
+ struct peci_dimmtemp *priv = dev_get_drvdata(dev);
+ u32 dimm_idx_max = priv->gen_info->dimm_idx_max;
+ int chan_rank, dimm_idx;
+
+ if (attr != hwmon_temp_label)
+ return -EOPNOTSUPP;
+
+ chan_rank = channel / dimm_idx_max;
+ dimm_idx = channel % dimm_idx_max;
+ *str = dimmtemp_label[chan_rank][dimm_idx];
+ return 0;
+}
+
+static int dimmtemp_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct peci_dimmtemp *priv = dev_get_drvdata(dev);
+ int rc;
+
+ if (attr != hwmon_temp_input)
+ return -EOPNOTSUPP;
+
+ rc = get_dimm_temp(priv, channel);
+ if (rc)
+ return rc;
+
+ *val = priv->temp[channel].value;
+ return 0;
+}
+
+static umode_t dimmtemp_is_visible(const void *data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ const struct peci_dimmtemp *priv = data;
+
+ if (priv->temp_config[channel] & BIT(attr) &&
+ priv->dimm_mask & BIT(channel))
+ return 0444;
+
+ return 0;
+}
+
+static const struct hwmon_ops dimmtemp_ops = {
+ .is_visible = dimmtemp_is_visible,
+ .read_string = dimmtemp_read_string,
+ .read = dimmtemp_read,
+};
+
+static int check_populated_dimms(struct peci_dimmtemp *priv)
+{
+ u32 chan_rank_max = priv->gen_info->chan_rank_max;
+ u32 dimm_idx_max = priv->gen_info->dimm_idx_max;
+ int chan_rank, dimm_idx, rc;
+ u8 cfg_data[4];
+
+ for (chan_rank = 0; chan_rank < chan_rank_max; chan_rank++) {
+ rc = peci_client_rd_pkg_cfg_cmd(priv->mfd,
+ MBX_INDEX_DDR_DIMM_TEMP,
+ chan_rank, cfg_data);
+ if (rc) {
+ priv->dimm_mask = 0;
+ return rc;
+ }
+
+ for (dimm_idx = 0; dimm_idx < dimm_idx_max; dimm_idx++)
+ if (cfg_data[dimm_idx])
+ priv->dimm_mask |= BIT(chan_rank *
+ dimm_idx_max +
+ dimm_idx);
+ }
+
+ if (!priv->dimm_mask)
+ return -EAGAIN;
+
+ dev_dbg(priv->dev, "Scanned populated DIMMs: 0x%x\n", priv->dimm_mask);
+ return 0;
+}
+
+static int create_dimm_temp_info(struct peci_dimmtemp *priv)
+{
+ int rc, i, config_idx, channels;
+ struct device *hwmon_dev;
+
+ rc = check_populated_dimms(priv);
+ if (rc) {
+ if (rc == -EAGAIN) {
+ if (priv->retry_count < DIMM_MASK_CHECK_RETRY_MAX) {
+ queue_delayed_work(priv->work_queue,
+ &priv->work_handler,
+ DIMM_MASK_CHECK_DELAY_JIFFIES);
+ priv->retry_count++;
+ dev_dbg(priv->dev,
+ "Deferred DIMM temp info creation\n");
+ } else {
+ dev_err(priv->dev,
+ "Timeout DIMM temp info creation\n");
+ rc = -ETIMEDOUT;
+ }
+ }
+
+ return rc;
+ }
+
+ channels = priv->gen_info->chan_rank_max *
+ priv->gen_info->dimm_idx_max;
+ for (i = 0, config_idx = 0; i < channels; i++)
+ if (priv->dimm_mask & BIT(i))
+ while (i >= config_idx)
+ priv->temp_config[config_idx++] =
+ HWMON_T_LABEL | HWMON_T_INPUT;
+
+ priv->chip.ops = &dimmtemp_ops;
+ priv->chip.info = priv->info;
+
+ priv->info[0] = &priv->temp_info;
+
+ priv->temp_info.type = hwmon_temp;
+ priv->temp_info.config = priv->temp_config;
+
+ hwmon_dev = devm_hwmon_device_register_with_info(priv->dev,
+ priv->name,
+ priv,
+ &priv->chip,
+ NULL);
+ rc = PTR_ERR_OR_ZERO(hwmon_dev);
+ if (!rc)
+ dev_dbg(priv->dev, "%s: sensor '%s'\n",
+ dev_name(hwmon_dev), priv->name);
+
+ return rc;
+}
+
+static void create_dimm_temp_info_delayed(struct work_struct *work)
+{
+ struct delayed_work *dwork = to_delayed_work(work);
+ struct peci_dimmtemp *priv = container_of(dwork, struct peci_dimmtemp,
+ work_handler);
+ int rc;
+
+ rc = create_dimm_temp_info(priv);
+ if (rc && rc != -EAGAIN)
+ dev_dbg(priv->dev, "Failed to create DIMM temp info\n");
+}
+
+static int peci_dimmtemp_probe(struct platform_device *pdev)
+{
+ struct peci_mfd *mfd = dev_get_drvdata(pdev->dev.parent);
+ struct device *dev = &pdev->dev;
+ struct peci_dimmtemp *priv;
+ int rc;
+
+ if ((mfd->adapter->cmd_mask &
+ (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG))) !=
+ (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG)))
+ return -ENODEV;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, priv);
+ priv->mfd = mfd;
+ priv->dev = dev;
+ priv->addr = mfd->addr;
+ priv->gen_info = mfd->gen_info;
+
+ snprintf(priv->name, PECI_NAME_SIZE, "peci_dimmtemp.cpu%d",
+ priv->mfd->cpu_no);
+
+ priv->work_queue = alloc_ordered_workqueue(priv->name, 0);
+ if (!priv->work_queue)
+ return -ENOMEM;
+
+ INIT_DELAYED_WORK(&priv->work_handler, create_dimm_temp_info_delayed);
+
+ rc = create_dimm_temp_info(priv);
+ if (rc && rc != -EAGAIN) {
+ dev_err(dev, "Failed to create DIMM temp info\n");
+ goto err_free_wq;
+ }
+
+ return 0;
+
+err_free_wq:
+ destroy_workqueue(priv->work_queue);
+ return rc;
+}
+
+static int peci_dimmtemp_remove(struct platform_device *pdev)
+{
+ struct peci_dimmtemp *priv = dev_get_drvdata(&pdev->dev);
+
+ cancel_delayed_work_sync(&priv->work_handler);
+ destroy_workqueue(priv->work_queue);
+
+ return 0;
+}
+
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id peci_dimmtemp_of_table[] = {
+ { .compatible = "intel,peci-dimmtemp" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, peci_dimmtemp_of_table);
+#endif
+
+static const struct platform_device_id peci_dimmtemp_ids[] = {
+ { .name = "peci-dimmtemp", .driver_data = 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, peci_dimmtemp_ids);
+
+static struct platform_driver peci_dimmtemp_driver = {
+ .probe = peci_dimmtemp_probe,
+ .remove = peci_dimmtemp_remove,
+ .id_table = peci_dimmtemp_ids,
+ .driver = {
+ .name = "peci-dimmtemp",
+ .of_match_table = of_match_ptr(peci_dimmtemp_of_table),
+ },
+};
+module_platform_driver(peci_dimmtemp_driver);
+
+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");
+MODULE_DESCRIPTION("PECI dimmtemp driver");
+MODULE_LICENSE("GPL v2");
--
2.18.0
^ permalink raw reply related
* [PATCH v7 10/12] hwmon: Add PECI cputemp driver
From: Jae Hyun Yoo @ 2018-07-23 21:47 UTC (permalink / raw)
To: Jean Delvare, Guenter Roeck, Rob Herring, Mark Rutland, Lee Jones,
Joel Stanley, Andrew Jeffery, Jonathan Corbet, Greg Kroah-Hartman,
Gustavo Pimentel, Kishon Vijay Abraham I, Lorenzo Pieralisi,
Darrick J . Wong, Eric Sandeen, Arnd Bergmann, Wu Hao,
Tomohiro Kusumi, Bryant G . Ly, Frederic Barrat, David
Cc: linux-hwmon, devicetree, linux-kernel, linux-arm-kernel,
linux-aspeed, linux-doc, openbmc, Jae Hyun Yoo, Alan Cox,
Andy Shevchenko, Jason M Biils, Miguel Ojeda, Andrew Lunn,
Stef van Os
In-Reply-To: <20180723214751.1733-1-jae.hyun.yoo@linux.intel.com>
This commit adds PECI cputemp hwmon driver.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Reviewed-by: James Feist <james.feist@linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Stef van Os <stef.van.os@prodrive-technologies.com>
---
drivers/hwmon/Kconfig | 14 ++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/peci-cputemp.c | 401 +++++++++++++++++++++++++++++++++++
3 files changed, 416 insertions(+)
create mode 100644 drivers/hwmon/peci-cputemp.c
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 81da17a42dc9..f08b4a670ac5 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1306,6 +1306,20 @@ config SENSORS_PCF8591
These devices are hard to detect and rarely found on mainstream
hardware. If unsure, say N.
+config SENSORS_PECI_CPUTEMP
+ tristate "PECI CPU temperature monitoring support"
+ depends on PECI
+ select MFD_INTEL_PECI_CLIENT
+ help
+ If you say yes here you get support for the generic Intel PECI
+ cputemp driver which provides Digital Thermal Sensor (DTS) thermal
+ readings of the CPU package and CPU cores that are accessible using
+ the PECI Client Command Suite via the processor PECI client.
+ Check Documentation/hwmon/peci-cputemp for details.
+
+ This driver can also be built as a module. If so, the module
+ will be called peci-cputemp.
+
source drivers/hwmon/pmbus/Kconfig
config SENSORS_PWM_FAN
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 93f7f41ea4ad..13ebde089ad5 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -141,6 +141,7 @@ obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
+obj-$(CONFIG_SENSORS_PECI_CPUTEMP) += peci-cputemp.o
obj-$(CONFIG_SENSORS_POWR1220) += powr1220.o
obj-$(CONFIG_SENSORS_PWM_FAN) += pwm-fan.o
obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON) += raspberrypi-hwmon.o
diff --git a/drivers/hwmon/peci-cputemp.c b/drivers/hwmon/peci-cputemp.c
new file mode 100644
index 000000000000..d92b31678876
--- /dev/null
+++ b/drivers/hwmon/peci-cputemp.c
@@ -0,0 +1,401 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Intel Corporation
+
+#include <linux/hwmon.h>
+#include <linux/jiffies.h>
+#include <linux/mfd/intel-peci-client.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#define DEFAULT_CHANNEL_NUMS 4
+#define CORETEMP_CHANNEL_NUMS CORE_NUMS_MAX
+#define CPUTEMP_CHANNEL_NUMS (DEFAULT_CHANNEL_NUMS + CORETEMP_CHANNEL_NUMS)
+
+/* The RESOLVED_CORES register in PCU of a client CPU */
+#define REG_RESOLVED_CORES_BUS 1
+#define REG_RESOLVED_CORES_DEVICE 30
+#define REG_RESOLVED_CORES_FUNCTION 3
+#define REG_RESOLVED_CORES_OFFSET 0xB4
+
+struct temp_group {
+ struct temp_data die;
+ struct temp_data tcontrol;
+ struct temp_data tthrottle;
+ struct temp_data tjmax;
+ struct temp_data core[CORETEMP_CHANNEL_NUMS];
+};
+
+struct peci_cputemp {
+ struct peci_mfd *mfd;
+ struct device *dev;
+ char name[PECI_NAME_SIZE];
+ u8 addr;
+ const struct cpu_gen_info *gen_info;
+ struct temp_group temp;
+ u32 core_mask;
+ u32 temp_config[CPUTEMP_CHANNEL_NUMS + 1];
+ uint config_idx;
+ struct hwmon_channel_info temp_info;
+ const struct hwmon_channel_info *info[2];
+ struct hwmon_chip_info chip;
+};
+
+enum cputemp_channels {
+ channel_die,
+ channel_tcontrol,
+ channel_tthrottle,
+ channel_tjmax,
+ channel_core,
+};
+
+static const u32 config_table[DEFAULT_CHANNEL_NUMS + 1] = {
+ /* Die temperature */
+ HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
+ HWMON_T_CRIT_HYST,
+
+ /* Tcontrol temperature */
+ HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_CRIT,
+
+ /* Tthrottle temperature */
+ HWMON_T_LABEL | HWMON_T_INPUT,
+
+ /* Tjmax temperature */
+ HWMON_T_LABEL | HWMON_T_INPUT,
+
+ /* Core temperature - for all core channels */
+ HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
+ HWMON_T_CRIT_HYST,
+};
+
+static const char *cputemp_label[CPUTEMP_CHANNEL_NUMS] = {
+ "Die",
+ "Tcontrol",
+ "Tthrottle",
+ "Tjmax",
+ "Core 0", "Core 1", "Core 2", "Core 3",
+ "Core 4", "Core 5", "Core 6", "Core 7",
+ "Core 8", "Core 9", "Core 10", "Core 11",
+ "Core 12", "Core 13", "Core 14", "Core 15",
+ "Core 16", "Core 17", "Core 18", "Core 19",
+ "Core 20", "Core 21", "Core 22", "Core 23",
+};
+
+static s32 ten_dot_six_to_millidegree(s32 val)
+{
+ return ((val ^ 0x8000) - 0x8000) * 1000 / 64;
+}
+
+static int get_temp_targets(struct peci_cputemp *priv)
+{
+ s32 tthrottle_offset;
+ s32 tcontrol_margin;
+ u8 pkg_cfg[4];
+ int rc;
+
+ /**
+ * Just use only the tcontrol marker to determine if target values need
+ * update.
+ */
+ if (!peci_temp_need_update(&priv->temp.tcontrol))
+ return 0;
+
+ rc = peci_client_rd_pkg_cfg_cmd(priv->mfd, MBX_INDEX_TEMP_TARGET,
+ 0, pkg_cfg);
+ if (rc)
+ return rc;
+
+ priv->temp.tjmax.value = pkg_cfg[2] * 1000;
+
+ tcontrol_margin = pkg_cfg[1];
+ tcontrol_margin = ((tcontrol_margin ^ 0x80) - 0x80) * 1000;
+ priv->temp.tcontrol.value = priv->temp.tjmax.value - tcontrol_margin;
+
+ tthrottle_offset = (pkg_cfg[3] & 0x2f) * 1000;
+ priv->temp.tthrottle.value = priv->temp.tjmax.value - tthrottle_offset;
+
+ peci_temp_mark_updated(&priv->temp.tcontrol);
+
+ return 0;
+}
+
+static int get_die_temp(struct peci_cputemp *priv)
+{
+ struct peci_get_temp_msg msg;
+ int rc;
+
+ if (!peci_temp_need_update(&priv->temp.die))
+ return 0;
+
+ msg.addr = priv->addr;
+
+ rc = peci_client_command(priv->mfd, PECI_CMD_GET_TEMP, &msg);
+ if (rc)
+ return rc;
+
+ /* Note that the tjmax should be available before calling it */
+ priv->temp.die.value = priv->temp.tjmax.value +
+ (msg.temp_raw * 1000 / 64);
+
+ peci_temp_mark_updated(&priv->temp.die);
+
+ return 0;
+}
+
+static int get_core_temp(struct peci_cputemp *priv, int core_index)
+{
+ s32 core_dts_margin;
+ u8 pkg_cfg[4];
+ int rc;
+
+ if (!peci_temp_need_update(&priv->temp.core[core_index]))
+ return 0;
+
+ rc = peci_client_rd_pkg_cfg_cmd(priv->mfd, MBX_INDEX_PER_CORE_DTS_TEMP,
+ core_index, pkg_cfg);
+ if (rc)
+ return rc;
+
+ core_dts_margin = le16_to_cpup((__le16 *)pkg_cfg);
+
+ /**
+ * Processors return a value of the core DTS reading in 10.6 format
+ * (10 bits signed decimal, 6 bits fractional).
+ * Error codes:
+ * 0x8000: General sensor error
+ * 0x8001: Reserved
+ * 0x8002: Underflow on reading value
+ * 0x8003-0x81ff: Reserved
+ */
+ if (core_dts_margin >= 0x8000 && core_dts_margin <= 0x81ff)
+ return -EIO;
+
+ core_dts_margin = ten_dot_six_to_millidegree(core_dts_margin);
+
+ /* Note that the tjmax should be available before calling it */
+ priv->temp.core[core_index].value = priv->temp.tjmax.value +
+ core_dts_margin;
+
+ peci_temp_mark_updated(&priv->temp.core[core_index]);
+
+ return 0;
+}
+
+static int cputemp_read_string(struct device *dev,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel, const char **str)
+{
+ if (attr != hwmon_temp_label)
+ return -EOPNOTSUPP;
+
+ *str = cputemp_label[channel];
+ return 0;
+}
+
+static int cputemp_read(struct device *dev,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct peci_cputemp *priv = dev_get_drvdata(dev);
+ int rc, core_index;
+
+ if (channel >= CPUTEMP_CHANNEL_NUMS ||
+ !(priv->temp_config[channel] & BIT(attr)))
+ return -EOPNOTSUPP;
+
+ rc = get_temp_targets(priv);
+ if (rc)
+ return rc;
+
+ switch (attr) {
+ case hwmon_temp_input:
+ switch (channel) {
+ case channel_die:
+ rc = get_die_temp(priv);
+ if (rc)
+ break;
+
+ *val = priv->temp.die.value;
+ break;
+ case channel_tcontrol:
+ *val = priv->temp.tcontrol.value;
+ break;
+ case channel_tthrottle:
+ *val = priv->temp.tthrottle.value;
+ break;
+ case channel_tjmax:
+ *val = priv->temp.tjmax.value;
+ break;
+ default:
+ core_index = channel - DEFAULT_CHANNEL_NUMS;
+ rc = get_core_temp(priv, core_index);
+ if (rc)
+ break;
+
+ *val = priv->temp.core[core_index].value;
+ break;
+ }
+ break;
+ case hwmon_temp_max:
+ *val = priv->temp.tcontrol.value;
+ break;
+ case hwmon_temp_crit:
+ *val = priv->temp.tjmax.value;
+ break;
+ case hwmon_temp_crit_hyst:
+ *val = priv->temp.tjmax.value - priv->temp.tcontrol.value;
+ break;
+ default:
+ rc = -EOPNOTSUPP;
+ break;
+ }
+
+ return rc;
+}
+
+static umode_t cputemp_is_visible(const void *data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ const struct peci_cputemp *priv = data;
+
+ if (priv->temp_config[channel] & BIT(attr))
+ if (channel < DEFAULT_CHANNEL_NUMS ||
+ (channel >= DEFAULT_CHANNEL_NUMS &&
+ (priv->core_mask & BIT(channel - DEFAULT_CHANNEL_NUMS))))
+ return 0444;
+
+ return 0;
+}
+
+static const struct hwmon_ops cputemp_ops = {
+ .is_visible = cputemp_is_visible,
+ .read_string = cputemp_read_string,
+ .read = cputemp_read,
+};
+
+static int check_resolved_cores(struct peci_cputemp *priv)
+{
+ struct peci_rd_pci_cfg_local_msg msg;
+ int rc;
+
+ /* Get the RESOLVED_CORES register value */
+ msg.addr = priv->addr;
+ msg.bus = REG_RESOLVED_CORES_BUS;
+ msg.device = REG_RESOLVED_CORES_DEVICE;
+ msg.function = REG_RESOLVED_CORES_FUNCTION;
+ msg.reg = REG_RESOLVED_CORES_OFFSET;
+ msg.rx_len = 4;
+
+ rc = peci_client_command(priv->mfd, PECI_CMD_RD_PCI_CFG_LOCAL, &msg);
+ if (rc)
+ return rc;
+
+ priv->core_mask = le32_to_cpup((__le32 *)msg.pci_config);
+ if (!priv->core_mask)
+ return -EAGAIN;
+
+ dev_dbg(priv->dev, "Scanned resolved cores: 0x%x\n", priv->core_mask);
+ return 0;
+}
+
+static int create_core_temp_info(struct peci_cputemp *priv)
+{
+ int rc, i;
+
+ rc = check_resolved_cores(priv);
+ if (rc)
+ return rc;
+
+ for (i = 0; i < priv->gen_info->core_max; i++)
+ if (priv->core_mask & BIT(i))
+ while (i + DEFAULT_CHANNEL_NUMS >= priv->config_idx)
+ priv->temp_config[priv->config_idx++] =
+ config_table[channel_core];
+
+ return 0;
+}
+
+static int peci_cputemp_probe(struct platform_device *pdev)
+{
+ struct peci_mfd *mfd = dev_get_drvdata(pdev->dev.parent);
+ struct device *dev = &pdev->dev;
+ struct peci_cputemp *priv;
+ struct device *hwmon_dev;
+ int rc;
+
+ if ((mfd->adapter->cmd_mask &
+ (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG))) !=
+ (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG)))
+ return -ENODEV;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, priv);
+ priv->mfd = mfd;
+ priv->dev = dev;
+ priv->addr = mfd->addr;
+ priv->gen_info = mfd->gen_info;
+
+ snprintf(priv->name, PECI_NAME_SIZE, "peci_cputemp.cpu%d", mfd->cpu_no);
+
+ priv->temp_config[priv->config_idx++] = config_table[channel_die];
+ priv->temp_config[priv->config_idx++] = config_table[channel_tcontrol];
+ priv->temp_config[priv->config_idx++] = config_table[channel_tthrottle];
+ priv->temp_config[priv->config_idx++] = config_table[channel_tjmax];
+
+ rc = create_core_temp_info(priv);
+ if (rc)
+ dev_dbg(dev, "Skipped creating core temp info\n");
+
+ priv->chip.ops = &cputemp_ops;
+ priv->chip.info = priv->info;
+
+ priv->info[0] = &priv->temp_info;
+
+ priv->temp_info.type = hwmon_temp;
+ priv->temp_info.config = priv->temp_config;
+
+ hwmon_dev = devm_hwmon_device_register_with_info(priv->dev,
+ priv->name,
+ priv,
+ &priv->chip,
+ NULL);
+
+ if (IS_ERR(hwmon_dev))
+ return PTR_ERR(hwmon_dev);
+
+ dev_dbg(dev, "%s: sensor '%s'\n", dev_name(hwmon_dev), priv->name);
+
+ return 0;
+}
+
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id peci_cputemp_of_table[] = {
+ { .compatible = "intel,peci-cputemp" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, peci_cputemp_of_table);
+#endif
+
+static const struct platform_device_id peci_cputemp_ids[] = {
+ { .name = "peci-cputemp", .driver_data = 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, peci_cputemp_ids);
+
+static struct platform_driver peci_cputemp_driver = {
+ .probe = peci_cputemp_probe,
+ .id_table = peci_cputemp_ids,
+ .driver = {
+ .name = "peci-cputemp",
+ .of_match_table = of_match_ptr(peci_cputemp_of_table),
+ },
+};
+module_platform_driver(peci_cputemp_driver);
+
+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");
+MODULE_DESCRIPTION("PECI cputemp driver");
+MODULE_LICENSE("GPL v2");
--
2.18.0
^ permalink raw reply related
* [PATCH v7 10/12] hwmon: Add PECI cputemp driver
From: Jae Hyun Yoo @ 2018-07-23 21:47 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180723214751.1733-1-jae.hyun.yoo@linux.intel.com>
This commit adds PECI cputemp hwmon driver.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Reviewed-by: James Feist <james.feist@linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Stef van Os <stef.van.os@prodrive-technologies.com>
---
drivers/hwmon/Kconfig | 14 ++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/peci-cputemp.c | 401 +++++++++++++++++++++++++++++++++++
3 files changed, 416 insertions(+)
create mode 100644 drivers/hwmon/peci-cputemp.c
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 81da17a42dc9..f08b4a670ac5 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1306,6 +1306,20 @@ config SENSORS_PCF8591
These devices are hard to detect and rarely found on mainstream
hardware. If unsure, say N.
+config SENSORS_PECI_CPUTEMP
+ tristate "PECI CPU temperature monitoring support"
+ depends on PECI
+ select MFD_INTEL_PECI_CLIENT
+ help
+ If you say yes here you get support for the generic Intel PECI
+ cputemp driver which provides Digital Thermal Sensor (DTS) thermal
+ readings of the CPU package and CPU cores that are accessible using
+ the PECI Client Command Suite via the processor PECI client.
+ Check Documentation/hwmon/peci-cputemp for details.
+
+ This driver can also be built as a module. If so, the module
+ will be called peci-cputemp.
+
source drivers/hwmon/pmbus/Kconfig
config SENSORS_PWM_FAN
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 93f7f41ea4ad..13ebde089ad5 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -141,6 +141,7 @@ obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
+obj-$(CONFIG_SENSORS_PECI_CPUTEMP) += peci-cputemp.o
obj-$(CONFIG_SENSORS_POWR1220) += powr1220.o
obj-$(CONFIG_SENSORS_PWM_FAN) += pwm-fan.o
obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON) += raspberrypi-hwmon.o
diff --git a/drivers/hwmon/peci-cputemp.c b/drivers/hwmon/peci-cputemp.c
new file mode 100644
index 000000000000..d92b31678876
--- /dev/null
+++ b/drivers/hwmon/peci-cputemp.c
@@ -0,0 +1,401 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Intel Corporation
+
+#include <linux/hwmon.h>
+#include <linux/jiffies.h>
+#include <linux/mfd/intel-peci-client.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#define DEFAULT_CHANNEL_NUMS 4
+#define CORETEMP_CHANNEL_NUMS CORE_NUMS_MAX
+#define CPUTEMP_CHANNEL_NUMS (DEFAULT_CHANNEL_NUMS + CORETEMP_CHANNEL_NUMS)
+
+/* The RESOLVED_CORES register in PCU of a client CPU */
+#define REG_RESOLVED_CORES_BUS 1
+#define REG_RESOLVED_CORES_DEVICE 30
+#define REG_RESOLVED_CORES_FUNCTION 3
+#define REG_RESOLVED_CORES_OFFSET 0xB4
+
+struct temp_group {
+ struct temp_data die;
+ struct temp_data tcontrol;
+ struct temp_data tthrottle;
+ struct temp_data tjmax;
+ struct temp_data core[CORETEMP_CHANNEL_NUMS];
+};
+
+struct peci_cputemp {
+ struct peci_mfd *mfd;
+ struct device *dev;
+ char name[PECI_NAME_SIZE];
+ u8 addr;
+ const struct cpu_gen_info *gen_info;
+ struct temp_group temp;
+ u32 core_mask;
+ u32 temp_config[CPUTEMP_CHANNEL_NUMS + 1];
+ uint config_idx;
+ struct hwmon_channel_info temp_info;
+ const struct hwmon_channel_info *info[2];
+ struct hwmon_chip_info chip;
+};
+
+enum cputemp_channels {
+ channel_die,
+ channel_tcontrol,
+ channel_tthrottle,
+ channel_tjmax,
+ channel_core,
+};
+
+static const u32 config_table[DEFAULT_CHANNEL_NUMS + 1] = {
+ /* Die temperature */
+ HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
+ HWMON_T_CRIT_HYST,
+
+ /* Tcontrol temperature */
+ HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_CRIT,
+
+ /* Tthrottle temperature */
+ HWMON_T_LABEL | HWMON_T_INPUT,
+
+ /* Tjmax temperature */
+ HWMON_T_LABEL | HWMON_T_INPUT,
+
+ /* Core temperature - for all core channels */
+ HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
+ HWMON_T_CRIT_HYST,
+};
+
+static const char *cputemp_label[CPUTEMP_CHANNEL_NUMS] = {
+ "Die",
+ "Tcontrol",
+ "Tthrottle",
+ "Tjmax",
+ "Core 0", "Core 1", "Core 2", "Core 3",
+ "Core 4", "Core 5", "Core 6", "Core 7",
+ "Core 8", "Core 9", "Core 10", "Core 11",
+ "Core 12", "Core 13", "Core 14", "Core 15",
+ "Core 16", "Core 17", "Core 18", "Core 19",
+ "Core 20", "Core 21", "Core 22", "Core 23",
+};
+
+static s32 ten_dot_six_to_millidegree(s32 val)
+{
+ return ((val ^ 0x8000) - 0x8000) * 1000 / 64;
+}
+
+static int get_temp_targets(struct peci_cputemp *priv)
+{
+ s32 tthrottle_offset;
+ s32 tcontrol_margin;
+ u8 pkg_cfg[4];
+ int rc;
+
+ /**
+ * Just use only the tcontrol marker to determine if target values need
+ * update.
+ */
+ if (!peci_temp_need_update(&priv->temp.tcontrol))
+ return 0;
+
+ rc = peci_client_rd_pkg_cfg_cmd(priv->mfd, MBX_INDEX_TEMP_TARGET,
+ 0, pkg_cfg);
+ if (rc)
+ return rc;
+
+ priv->temp.tjmax.value = pkg_cfg[2] * 1000;
+
+ tcontrol_margin = pkg_cfg[1];
+ tcontrol_margin = ((tcontrol_margin ^ 0x80) - 0x80) * 1000;
+ priv->temp.tcontrol.value = priv->temp.tjmax.value - tcontrol_margin;
+
+ tthrottle_offset = (pkg_cfg[3] & 0x2f) * 1000;
+ priv->temp.tthrottle.value = priv->temp.tjmax.value - tthrottle_offset;
+
+ peci_temp_mark_updated(&priv->temp.tcontrol);
+
+ return 0;
+}
+
+static int get_die_temp(struct peci_cputemp *priv)
+{
+ struct peci_get_temp_msg msg;
+ int rc;
+
+ if (!peci_temp_need_update(&priv->temp.die))
+ return 0;
+
+ msg.addr = priv->addr;
+
+ rc = peci_client_command(priv->mfd, PECI_CMD_GET_TEMP, &msg);
+ if (rc)
+ return rc;
+
+ /* Note that the tjmax should be available before calling it */
+ priv->temp.die.value = priv->temp.tjmax.value +
+ (msg.temp_raw * 1000 / 64);
+
+ peci_temp_mark_updated(&priv->temp.die);
+
+ return 0;
+}
+
+static int get_core_temp(struct peci_cputemp *priv, int core_index)
+{
+ s32 core_dts_margin;
+ u8 pkg_cfg[4];
+ int rc;
+
+ if (!peci_temp_need_update(&priv->temp.core[core_index]))
+ return 0;
+
+ rc = peci_client_rd_pkg_cfg_cmd(priv->mfd, MBX_INDEX_PER_CORE_DTS_TEMP,
+ core_index, pkg_cfg);
+ if (rc)
+ return rc;
+
+ core_dts_margin = le16_to_cpup((__le16 *)pkg_cfg);
+
+ /**
+ * Processors return a value of the core DTS reading in 10.6 format
+ * (10 bits signed decimal, 6 bits fractional).
+ * Error codes:
+ * 0x8000: General sensor error
+ * 0x8001: Reserved
+ * 0x8002: Underflow on reading value
+ * 0x8003-0x81ff: Reserved
+ */
+ if (core_dts_margin >= 0x8000 && core_dts_margin <= 0x81ff)
+ return -EIO;
+
+ core_dts_margin = ten_dot_six_to_millidegree(core_dts_margin);
+
+ /* Note that the tjmax should be available before calling it */
+ priv->temp.core[core_index].value = priv->temp.tjmax.value +
+ core_dts_margin;
+
+ peci_temp_mark_updated(&priv->temp.core[core_index]);
+
+ return 0;
+}
+
+static int cputemp_read_string(struct device *dev,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel, const char **str)
+{
+ if (attr != hwmon_temp_label)
+ return -EOPNOTSUPP;
+
+ *str = cputemp_label[channel];
+ return 0;
+}
+
+static int cputemp_read(struct device *dev,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct peci_cputemp *priv = dev_get_drvdata(dev);
+ int rc, core_index;
+
+ if (channel >= CPUTEMP_CHANNEL_NUMS ||
+ !(priv->temp_config[channel] & BIT(attr)))
+ return -EOPNOTSUPP;
+
+ rc = get_temp_targets(priv);
+ if (rc)
+ return rc;
+
+ switch (attr) {
+ case hwmon_temp_input:
+ switch (channel) {
+ case channel_die:
+ rc = get_die_temp(priv);
+ if (rc)
+ break;
+
+ *val = priv->temp.die.value;
+ break;
+ case channel_tcontrol:
+ *val = priv->temp.tcontrol.value;
+ break;
+ case channel_tthrottle:
+ *val = priv->temp.tthrottle.value;
+ break;
+ case channel_tjmax:
+ *val = priv->temp.tjmax.value;
+ break;
+ default:
+ core_index = channel - DEFAULT_CHANNEL_NUMS;
+ rc = get_core_temp(priv, core_index);
+ if (rc)
+ break;
+
+ *val = priv->temp.core[core_index].value;
+ break;
+ }
+ break;
+ case hwmon_temp_max:
+ *val = priv->temp.tcontrol.value;
+ break;
+ case hwmon_temp_crit:
+ *val = priv->temp.tjmax.value;
+ break;
+ case hwmon_temp_crit_hyst:
+ *val = priv->temp.tjmax.value - priv->temp.tcontrol.value;
+ break;
+ default:
+ rc = -EOPNOTSUPP;
+ break;
+ }
+
+ return rc;
+}
+
+static umode_t cputemp_is_visible(const void *data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ const struct peci_cputemp *priv = data;
+
+ if (priv->temp_config[channel] & BIT(attr))
+ if (channel < DEFAULT_CHANNEL_NUMS ||
+ (channel >= DEFAULT_CHANNEL_NUMS &&
+ (priv->core_mask & BIT(channel - DEFAULT_CHANNEL_NUMS))))
+ return 0444;
+
+ return 0;
+}
+
+static const struct hwmon_ops cputemp_ops = {
+ .is_visible = cputemp_is_visible,
+ .read_string = cputemp_read_string,
+ .read = cputemp_read,
+};
+
+static int check_resolved_cores(struct peci_cputemp *priv)
+{
+ struct peci_rd_pci_cfg_local_msg msg;
+ int rc;
+
+ /* Get the RESOLVED_CORES register value */
+ msg.addr = priv->addr;
+ msg.bus = REG_RESOLVED_CORES_BUS;
+ msg.device = REG_RESOLVED_CORES_DEVICE;
+ msg.function = REG_RESOLVED_CORES_FUNCTION;
+ msg.reg = REG_RESOLVED_CORES_OFFSET;
+ msg.rx_len = 4;
+
+ rc = peci_client_command(priv->mfd, PECI_CMD_RD_PCI_CFG_LOCAL, &msg);
+ if (rc)
+ return rc;
+
+ priv->core_mask = le32_to_cpup((__le32 *)msg.pci_config);
+ if (!priv->core_mask)
+ return -EAGAIN;
+
+ dev_dbg(priv->dev, "Scanned resolved cores: 0x%x\n", priv->core_mask);
+ return 0;
+}
+
+static int create_core_temp_info(struct peci_cputemp *priv)
+{
+ int rc, i;
+
+ rc = check_resolved_cores(priv);
+ if (rc)
+ return rc;
+
+ for (i = 0; i < priv->gen_info->core_max; i++)
+ if (priv->core_mask & BIT(i))
+ while (i + DEFAULT_CHANNEL_NUMS >= priv->config_idx)
+ priv->temp_config[priv->config_idx++] =
+ config_table[channel_core];
+
+ return 0;
+}
+
+static int peci_cputemp_probe(struct platform_device *pdev)
+{
+ struct peci_mfd *mfd = dev_get_drvdata(pdev->dev.parent);
+ struct device *dev = &pdev->dev;
+ struct peci_cputemp *priv;
+ struct device *hwmon_dev;
+ int rc;
+
+ if ((mfd->adapter->cmd_mask &
+ (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG))) !=
+ (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG)))
+ return -ENODEV;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, priv);
+ priv->mfd = mfd;
+ priv->dev = dev;
+ priv->addr = mfd->addr;
+ priv->gen_info = mfd->gen_info;
+
+ snprintf(priv->name, PECI_NAME_SIZE, "peci_cputemp.cpu%d", mfd->cpu_no);
+
+ priv->temp_config[priv->config_idx++] = config_table[channel_die];
+ priv->temp_config[priv->config_idx++] = config_table[channel_tcontrol];
+ priv->temp_config[priv->config_idx++] = config_table[channel_tthrottle];
+ priv->temp_config[priv->config_idx++] = config_table[channel_tjmax];
+
+ rc = create_core_temp_info(priv);
+ if (rc)
+ dev_dbg(dev, "Skipped creating core temp info\n");
+
+ priv->chip.ops = &cputemp_ops;
+ priv->chip.info = priv->info;
+
+ priv->info[0] = &priv->temp_info;
+
+ priv->temp_info.type = hwmon_temp;
+ priv->temp_info.config = priv->temp_config;
+
+ hwmon_dev = devm_hwmon_device_register_with_info(priv->dev,
+ priv->name,
+ priv,
+ &priv->chip,
+ NULL);
+
+ if (IS_ERR(hwmon_dev))
+ return PTR_ERR(hwmon_dev);
+
+ dev_dbg(dev, "%s: sensor '%s'\n", dev_name(hwmon_dev), priv->name);
+
+ return 0;
+}
+
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id peci_cputemp_of_table[] = {
+ { .compatible = "intel,peci-cputemp" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, peci_cputemp_of_table);
+#endif
+
+static const struct platform_device_id peci_cputemp_ids[] = {
+ { .name = "peci-cputemp", .driver_data = 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, peci_cputemp_ids);
+
+static struct platform_driver peci_cputemp_driver = {
+ .probe = peci_cputemp_probe,
+ .id_table = peci_cputemp_ids,
+ .driver = {
+ .name = "peci-cputemp",
+ .of_match_table = of_match_ptr(peci_cputemp_of_table),
+ },
+};
+module_platform_driver(peci_cputemp_driver);
+
+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");
+MODULE_DESCRIPTION("PECI cputemp driver");
+MODULE_LICENSE("GPL v2");
--
2.18.0
^ permalink raw reply related
* [PATCH v7 10/12] hwmon: Add PECI cputemp driver
From: Jae Hyun Yoo @ 2018-07-23 21:47 UTC (permalink / raw)
To: Jean Delvare, Guenter Roeck, Rob Herring, Mark Rutland, Lee Jones,
Joel Stanley, Andrew Jeffery, Jonathan Corbet, Greg Kroah-Hartman,
Gustavo Pimentel, Kishon Vijay Abraham I, Lorenzo Pieralisi,
Darrick J . Wong, Eric Sandeen, Arnd Bergmann, Wu Hao,
Tomohiro Kusumi, Bryant G . Ly, Frederic Barrat, David S . Miller,
Mauro Carvalho Chehab, Andrew Morton, Randy Dunlap,
Philippe Ombredanne, Vinod Koul, Stephen Boyd, David Kershner,
Uwe Kleine-Konig, Sagar Dharia, Johan Hovold, Thomas Gleixner,
Juergen Gross, Cyrille Pitchen
Cc: linux-hwmon, devicetree, linux-kernel, linux-arm-kernel,
linux-aspeed, linux-doc, openbmc, Jae Hyun Yoo, Alan Cox,
Andy Shevchenko, Jason M Biils, Miguel Ojeda, Andrew Lunn,
Stef van Os
In-Reply-To: <20180723214751.1733-1-jae.hyun.yoo@linux.intel.com>
This commit adds PECI cputemp hwmon driver.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Reviewed-by: James Feist <james.feist@linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Stef van Os <stef.van.os@prodrive-technologies.com>
---
drivers/hwmon/Kconfig | 14 ++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/peci-cputemp.c | 401 +++++++++++++++++++++++++++++++++++
3 files changed, 416 insertions(+)
create mode 100644 drivers/hwmon/peci-cputemp.c
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 81da17a42dc9..f08b4a670ac5 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1306,6 +1306,20 @@ config SENSORS_PCF8591
These devices are hard to detect and rarely found on mainstream
hardware. If unsure, say N.
+config SENSORS_PECI_CPUTEMP
+ tristate "PECI CPU temperature monitoring support"
+ depends on PECI
+ select MFD_INTEL_PECI_CLIENT
+ help
+ If you say yes here you get support for the generic Intel PECI
+ cputemp driver which provides Digital Thermal Sensor (DTS) thermal
+ readings of the CPU package and CPU cores that are accessible using
+ the PECI Client Command Suite via the processor PECI client.
+ Check Documentation/hwmon/peci-cputemp for details.
+
+ This driver can also be built as a module. If so, the module
+ will be called peci-cputemp.
+
source drivers/hwmon/pmbus/Kconfig
config SENSORS_PWM_FAN
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 93f7f41ea4ad..13ebde089ad5 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -141,6 +141,7 @@ obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
+obj-$(CONFIG_SENSORS_PECI_CPUTEMP) += peci-cputemp.o
obj-$(CONFIG_SENSORS_POWR1220) += powr1220.o
obj-$(CONFIG_SENSORS_PWM_FAN) += pwm-fan.o
obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON) += raspberrypi-hwmon.o
diff --git a/drivers/hwmon/peci-cputemp.c b/drivers/hwmon/peci-cputemp.c
new file mode 100644
index 000000000000..d92b31678876
--- /dev/null
+++ b/drivers/hwmon/peci-cputemp.c
@@ -0,0 +1,401 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Intel Corporation
+
+#include <linux/hwmon.h>
+#include <linux/jiffies.h>
+#include <linux/mfd/intel-peci-client.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#define DEFAULT_CHANNEL_NUMS 4
+#define CORETEMP_CHANNEL_NUMS CORE_NUMS_MAX
+#define CPUTEMP_CHANNEL_NUMS (DEFAULT_CHANNEL_NUMS + CORETEMP_CHANNEL_NUMS)
+
+/* The RESOLVED_CORES register in PCU of a client CPU */
+#define REG_RESOLVED_CORES_BUS 1
+#define REG_RESOLVED_CORES_DEVICE 30
+#define REG_RESOLVED_CORES_FUNCTION 3
+#define REG_RESOLVED_CORES_OFFSET 0xB4
+
+struct temp_group {
+ struct temp_data die;
+ struct temp_data tcontrol;
+ struct temp_data tthrottle;
+ struct temp_data tjmax;
+ struct temp_data core[CORETEMP_CHANNEL_NUMS];
+};
+
+struct peci_cputemp {
+ struct peci_mfd *mfd;
+ struct device *dev;
+ char name[PECI_NAME_SIZE];
+ u8 addr;
+ const struct cpu_gen_info *gen_info;
+ struct temp_group temp;
+ u32 core_mask;
+ u32 temp_config[CPUTEMP_CHANNEL_NUMS + 1];
+ uint config_idx;
+ struct hwmon_channel_info temp_info;
+ const struct hwmon_channel_info *info[2];
+ struct hwmon_chip_info chip;
+};
+
+enum cputemp_channels {
+ channel_die,
+ channel_tcontrol,
+ channel_tthrottle,
+ channel_tjmax,
+ channel_core,
+};
+
+static const u32 config_table[DEFAULT_CHANNEL_NUMS + 1] = {
+ /* Die temperature */
+ HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
+ HWMON_T_CRIT_HYST,
+
+ /* Tcontrol temperature */
+ HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_CRIT,
+
+ /* Tthrottle temperature */
+ HWMON_T_LABEL | HWMON_T_INPUT,
+
+ /* Tjmax temperature */
+ HWMON_T_LABEL | HWMON_T_INPUT,
+
+ /* Core temperature - for all core channels */
+ HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
+ HWMON_T_CRIT_HYST,
+};
+
+static const char *cputemp_label[CPUTEMP_CHANNEL_NUMS] = {
+ "Die",
+ "Tcontrol",
+ "Tthrottle",
+ "Tjmax",
+ "Core 0", "Core 1", "Core 2", "Core 3",
+ "Core 4", "Core 5", "Core 6", "Core 7",
+ "Core 8", "Core 9", "Core 10", "Core 11",
+ "Core 12", "Core 13", "Core 14", "Core 15",
+ "Core 16", "Core 17", "Core 18", "Core 19",
+ "Core 20", "Core 21", "Core 22", "Core 23",
+};
+
+static s32 ten_dot_six_to_millidegree(s32 val)
+{
+ return ((val ^ 0x8000) - 0x8000) * 1000 / 64;
+}
+
+static int get_temp_targets(struct peci_cputemp *priv)
+{
+ s32 tthrottle_offset;
+ s32 tcontrol_margin;
+ u8 pkg_cfg[4];
+ int rc;
+
+ /**
+ * Just use only the tcontrol marker to determine if target values need
+ * update.
+ */
+ if (!peci_temp_need_update(&priv->temp.tcontrol))
+ return 0;
+
+ rc = peci_client_rd_pkg_cfg_cmd(priv->mfd, MBX_INDEX_TEMP_TARGET,
+ 0, pkg_cfg);
+ if (rc)
+ return rc;
+
+ priv->temp.tjmax.value = pkg_cfg[2] * 1000;
+
+ tcontrol_margin = pkg_cfg[1];
+ tcontrol_margin = ((tcontrol_margin ^ 0x80) - 0x80) * 1000;
+ priv->temp.tcontrol.value = priv->temp.tjmax.value - tcontrol_margin;
+
+ tthrottle_offset = (pkg_cfg[3] & 0x2f) * 1000;
+ priv->temp.tthrottle.value = priv->temp.tjmax.value - tthrottle_offset;
+
+ peci_temp_mark_updated(&priv->temp.tcontrol);
+
+ return 0;
+}
+
+static int get_die_temp(struct peci_cputemp *priv)
+{
+ struct peci_get_temp_msg msg;
+ int rc;
+
+ if (!peci_temp_need_update(&priv->temp.die))
+ return 0;
+
+ msg.addr = priv->addr;
+
+ rc = peci_client_command(priv->mfd, PECI_CMD_GET_TEMP, &msg);
+ if (rc)
+ return rc;
+
+ /* Note that the tjmax should be available before calling it */
+ priv->temp.die.value = priv->temp.tjmax.value +
+ (msg.temp_raw * 1000 / 64);
+
+ peci_temp_mark_updated(&priv->temp.die);
+
+ return 0;
+}
+
+static int get_core_temp(struct peci_cputemp *priv, int core_index)
+{
+ s32 core_dts_margin;
+ u8 pkg_cfg[4];
+ int rc;
+
+ if (!peci_temp_need_update(&priv->temp.core[core_index]))
+ return 0;
+
+ rc = peci_client_rd_pkg_cfg_cmd(priv->mfd, MBX_INDEX_PER_CORE_DTS_TEMP,
+ core_index, pkg_cfg);
+ if (rc)
+ return rc;
+
+ core_dts_margin = le16_to_cpup((__le16 *)pkg_cfg);
+
+ /**
+ * Processors return a value of the core DTS reading in 10.6 format
+ * (10 bits signed decimal, 6 bits fractional).
+ * Error codes:
+ * 0x8000: General sensor error
+ * 0x8001: Reserved
+ * 0x8002: Underflow on reading value
+ * 0x8003-0x81ff: Reserved
+ */
+ if (core_dts_margin >= 0x8000 && core_dts_margin <= 0x81ff)
+ return -EIO;
+
+ core_dts_margin = ten_dot_six_to_millidegree(core_dts_margin);
+
+ /* Note that the tjmax should be available before calling it */
+ priv->temp.core[core_index].value = priv->temp.tjmax.value +
+ core_dts_margin;
+
+ peci_temp_mark_updated(&priv->temp.core[core_index]);
+
+ return 0;
+}
+
+static int cputemp_read_string(struct device *dev,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel, const char **str)
+{
+ if (attr != hwmon_temp_label)
+ return -EOPNOTSUPP;
+
+ *str = cputemp_label[channel];
+ return 0;
+}
+
+static int cputemp_read(struct device *dev,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct peci_cputemp *priv = dev_get_drvdata(dev);
+ int rc, core_index;
+
+ if (channel >= CPUTEMP_CHANNEL_NUMS ||
+ !(priv->temp_config[channel] & BIT(attr)))
+ return -EOPNOTSUPP;
+
+ rc = get_temp_targets(priv);
+ if (rc)
+ return rc;
+
+ switch (attr) {
+ case hwmon_temp_input:
+ switch (channel) {
+ case channel_die:
+ rc = get_die_temp(priv);
+ if (rc)
+ break;
+
+ *val = priv->temp.die.value;
+ break;
+ case channel_tcontrol:
+ *val = priv->temp.tcontrol.value;
+ break;
+ case channel_tthrottle:
+ *val = priv->temp.tthrottle.value;
+ break;
+ case channel_tjmax:
+ *val = priv->temp.tjmax.value;
+ break;
+ default:
+ core_index = channel - DEFAULT_CHANNEL_NUMS;
+ rc = get_core_temp(priv, core_index);
+ if (rc)
+ break;
+
+ *val = priv->temp.core[core_index].value;
+ break;
+ }
+ break;
+ case hwmon_temp_max:
+ *val = priv->temp.tcontrol.value;
+ break;
+ case hwmon_temp_crit:
+ *val = priv->temp.tjmax.value;
+ break;
+ case hwmon_temp_crit_hyst:
+ *val = priv->temp.tjmax.value - priv->temp.tcontrol.value;
+ break;
+ default:
+ rc = -EOPNOTSUPP;
+ break;
+ }
+
+ return rc;
+}
+
+static umode_t cputemp_is_visible(const void *data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ const struct peci_cputemp *priv = data;
+
+ if (priv->temp_config[channel] & BIT(attr))
+ if (channel < DEFAULT_CHANNEL_NUMS ||
+ (channel >= DEFAULT_CHANNEL_NUMS &&
+ (priv->core_mask & BIT(channel - DEFAULT_CHANNEL_NUMS))))
+ return 0444;
+
+ return 0;
+}
+
+static const struct hwmon_ops cputemp_ops = {
+ .is_visible = cputemp_is_visible,
+ .read_string = cputemp_read_string,
+ .read = cputemp_read,
+};
+
+static int check_resolved_cores(struct peci_cputemp *priv)
+{
+ struct peci_rd_pci_cfg_local_msg msg;
+ int rc;
+
+ /* Get the RESOLVED_CORES register value */
+ msg.addr = priv->addr;
+ msg.bus = REG_RESOLVED_CORES_BUS;
+ msg.device = REG_RESOLVED_CORES_DEVICE;
+ msg.function = REG_RESOLVED_CORES_FUNCTION;
+ msg.reg = REG_RESOLVED_CORES_OFFSET;
+ msg.rx_len = 4;
+
+ rc = peci_client_command(priv->mfd, PECI_CMD_RD_PCI_CFG_LOCAL, &msg);
+ if (rc)
+ return rc;
+
+ priv->core_mask = le32_to_cpup((__le32 *)msg.pci_config);
+ if (!priv->core_mask)
+ return -EAGAIN;
+
+ dev_dbg(priv->dev, "Scanned resolved cores: 0x%x\n", priv->core_mask);
+ return 0;
+}
+
+static int create_core_temp_info(struct peci_cputemp *priv)
+{
+ int rc, i;
+
+ rc = check_resolved_cores(priv);
+ if (rc)
+ return rc;
+
+ for (i = 0; i < priv->gen_info->core_max; i++)
+ if (priv->core_mask & BIT(i))
+ while (i + DEFAULT_CHANNEL_NUMS >= priv->config_idx)
+ priv->temp_config[priv->config_idx++] =
+ config_table[channel_core];
+
+ return 0;
+}
+
+static int peci_cputemp_probe(struct platform_device *pdev)
+{
+ struct peci_mfd *mfd = dev_get_drvdata(pdev->dev.parent);
+ struct device *dev = &pdev->dev;
+ struct peci_cputemp *priv;
+ struct device *hwmon_dev;
+ int rc;
+
+ if ((mfd->adapter->cmd_mask &
+ (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG))) !=
+ (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG)))
+ return -ENODEV;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, priv);
+ priv->mfd = mfd;
+ priv->dev = dev;
+ priv->addr = mfd->addr;
+ priv->gen_info = mfd->gen_info;
+
+ snprintf(priv->name, PECI_NAME_SIZE, "peci_cputemp.cpu%d", mfd->cpu_no);
+
+ priv->temp_config[priv->config_idx++] = config_table[channel_die];
+ priv->temp_config[priv->config_idx++] = config_table[channel_tcontrol];
+ priv->temp_config[priv->config_idx++] = config_table[channel_tthrottle];
+ priv->temp_config[priv->config_idx++] = config_table[channel_tjmax];
+
+ rc = create_core_temp_info(priv);
+ if (rc)
+ dev_dbg(dev, "Skipped creating core temp info\n");
+
+ priv->chip.ops = &cputemp_ops;
+ priv->chip.info = priv->info;
+
+ priv->info[0] = &priv->temp_info;
+
+ priv->temp_info.type = hwmon_temp;
+ priv->temp_info.config = priv->temp_config;
+
+ hwmon_dev = devm_hwmon_device_register_with_info(priv->dev,
+ priv->name,
+ priv,
+ &priv->chip,
+ NULL);
+
+ if (IS_ERR(hwmon_dev))
+ return PTR_ERR(hwmon_dev);
+
+ dev_dbg(dev, "%s: sensor '%s'\n", dev_name(hwmon_dev), priv->name);
+
+ return 0;
+}
+
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id peci_cputemp_of_table[] = {
+ { .compatible = "intel,peci-cputemp" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, peci_cputemp_of_table);
+#endif
+
+static const struct platform_device_id peci_cputemp_ids[] = {
+ { .name = "peci-cputemp", .driver_data = 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, peci_cputemp_ids);
+
+static struct platform_driver peci_cputemp_driver = {
+ .probe = peci_cputemp_probe,
+ .id_table = peci_cputemp_ids,
+ .driver = {
+ .name = "peci-cputemp",
+ .of_match_table = of_match_ptr(peci_cputemp_of_table),
+ },
+};
+module_platform_driver(peci_cputemp_driver);
+
+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");
+MODULE_DESCRIPTION("PECI cputemp driver");
+MODULE_LICENSE("GPL v2");
--
2.18.0
^ permalink raw reply related
* [PATCH v7 10/12] hwmon: Add PECI cputemp driver
From: Jae Hyun Yoo @ 2018-07-23 21:47 UTC (permalink / raw)
To: linux-aspeed
In-Reply-To: <20180723214751.1733-1-jae.hyun.yoo@linux.intel.com>
This commit adds PECI cputemp hwmon driver.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Reviewed-by: James Feist <james.feist@linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Stef van Os <stef.van.os@prodrive-technologies.com>
---
drivers/hwmon/Kconfig | 14 ++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/peci-cputemp.c | 401 +++++++++++++++++++++++++++++++++++
3 files changed, 416 insertions(+)
create mode 100644 drivers/hwmon/peci-cputemp.c
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 81da17a42dc9..f08b4a670ac5 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1306,6 +1306,20 @@ config SENSORS_PCF8591
These devices are hard to detect and rarely found on mainstream
hardware. If unsure, say N.
+config SENSORS_PECI_CPUTEMP
+ tristate "PECI CPU temperature monitoring support"
+ depends on PECI
+ select MFD_INTEL_PECI_CLIENT
+ help
+ If you say yes here you get support for the generic Intel PECI
+ cputemp driver which provides Digital Thermal Sensor (DTS) thermal
+ readings of the CPU package and CPU cores that are accessible using
+ the PECI Client Command Suite via the processor PECI client.
+ Check Documentation/hwmon/peci-cputemp for details.
+
+ This driver can also be built as a module. If so, the module
+ will be called peci-cputemp.
+
source drivers/hwmon/pmbus/Kconfig
config SENSORS_PWM_FAN
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 93f7f41ea4ad..13ebde089ad5 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -141,6 +141,7 @@ obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
+obj-$(CONFIG_SENSORS_PECI_CPUTEMP) += peci-cputemp.o
obj-$(CONFIG_SENSORS_POWR1220) += powr1220.o
obj-$(CONFIG_SENSORS_PWM_FAN) += pwm-fan.o
obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON) += raspberrypi-hwmon.o
diff --git a/drivers/hwmon/peci-cputemp.c b/drivers/hwmon/peci-cputemp.c
new file mode 100644
index 000000000000..d92b31678876
--- /dev/null
+++ b/drivers/hwmon/peci-cputemp.c
@@ -0,0 +1,401 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Intel Corporation
+
+#include <linux/hwmon.h>
+#include <linux/jiffies.h>
+#include <linux/mfd/intel-peci-client.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#define DEFAULT_CHANNEL_NUMS 4
+#define CORETEMP_CHANNEL_NUMS CORE_NUMS_MAX
+#define CPUTEMP_CHANNEL_NUMS (DEFAULT_CHANNEL_NUMS + CORETEMP_CHANNEL_NUMS)
+
+/* The RESOLVED_CORES register in PCU of a client CPU */
+#define REG_RESOLVED_CORES_BUS 1
+#define REG_RESOLVED_CORES_DEVICE 30
+#define REG_RESOLVED_CORES_FUNCTION 3
+#define REG_RESOLVED_CORES_OFFSET 0xB4
+
+struct temp_group {
+ struct temp_data die;
+ struct temp_data tcontrol;
+ struct temp_data tthrottle;
+ struct temp_data tjmax;
+ struct temp_data core[CORETEMP_CHANNEL_NUMS];
+};
+
+struct peci_cputemp {
+ struct peci_mfd *mfd;
+ struct device *dev;
+ char name[PECI_NAME_SIZE];
+ u8 addr;
+ const struct cpu_gen_info *gen_info;
+ struct temp_group temp;
+ u32 core_mask;
+ u32 temp_config[CPUTEMP_CHANNEL_NUMS + 1];
+ uint config_idx;
+ struct hwmon_channel_info temp_info;
+ const struct hwmon_channel_info *info[2];
+ struct hwmon_chip_info chip;
+};
+
+enum cputemp_channels {
+ channel_die,
+ channel_tcontrol,
+ channel_tthrottle,
+ channel_tjmax,
+ channel_core,
+};
+
+static const u32 config_table[DEFAULT_CHANNEL_NUMS + 1] = {
+ /* Die temperature */
+ HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
+ HWMON_T_CRIT_HYST,
+
+ /* Tcontrol temperature */
+ HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_CRIT,
+
+ /* Tthrottle temperature */
+ HWMON_T_LABEL | HWMON_T_INPUT,
+
+ /* Tjmax temperature */
+ HWMON_T_LABEL | HWMON_T_INPUT,
+
+ /* Core temperature - for all core channels */
+ HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
+ HWMON_T_CRIT_HYST,
+};
+
+static const char *cputemp_label[CPUTEMP_CHANNEL_NUMS] = {
+ "Die",
+ "Tcontrol",
+ "Tthrottle",
+ "Tjmax",
+ "Core 0", "Core 1", "Core 2", "Core 3",
+ "Core 4", "Core 5", "Core 6", "Core 7",
+ "Core 8", "Core 9", "Core 10", "Core 11",
+ "Core 12", "Core 13", "Core 14", "Core 15",
+ "Core 16", "Core 17", "Core 18", "Core 19",
+ "Core 20", "Core 21", "Core 22", "Core 23",
+};
+
+static s32 ten_dot_six_to_millidegree(s32 val)
+{
+ return ((val ^ 0x8000) - 0x8000) * 1000 / 64;
+}
+
+static int get_temp_targets(struct peci_cputemp *priv)
+{
+ s32 tthrottle_offset;
+ s32 tcontrol_margin;
+ u8 pkg_cfg[4];
+ int rc;
+
+ /**
+ * Just use only the tcontrol marker to determine if target values need
+ * update.
+ */
+ if (!peci_temp_need_update(&priv->temp.tcontrol))
+ return 0;
+
+ rc = peci_client_rd_pkg_cfg_cmd(priv->mfd, MBX_INDEX_TEMP_TARGET,
+ 0, pkg_cfg);
+ if (rc)
+ return rc;
+
+ priv->temp.tjmax.value = pkg_cfg[2] * 1000;
+
+ tcontrol_margin = pkg_cfg[1];
+ tcontrol_margin = ((tcontrol_margin ^ 0x80) - 0x80) * 1000;
+ priv->temp.tcontrol.value = priv->temp.tjmax.value - tcontrol_margin;
+
+ tthrottle_offset = (pkg_cfg[3] & 0x2f) * 1000;
+ priv->temp.tthrottle.value = priv->temp.tjmax.value - tthrottle_offset;
+
+ peci_temp_mark_updated(&priv->temp.tcontrol);
+
+ return 0;
+}
+
+static int get_die_temp(struct peci_cputemp *priv)
+{
+ struct peci_get_temp_msg msg;
+ int rc;
+
+ if (!peci_temp_need_update(&priv->temp.die))
+ return 0;
+
+ msg.addr = priv->addr;
+
+ rc = peci_client_command(priv->mfd, PECI_CMD_GET_TEMP, &msg);
+ if (rc)
+ return rc;
+
+ /* Note that the tjmax should be available before calling it */
+ priv->temp.die.value = priv->temp.tjmax.value +
+ (msg.temp_raw * 1000 / 64);
+
+ peci_temp_mark_updated(&priv->temp.die);
+
+ return 0;
+}
+
+static int get_core_temp(struct peci_cputemp *priv, int core_index)
+{
+ s32 core_dts_margin;
+ u8 pkg_cfg[4];
+ int rc;
+
+ if (!peci_temp_need_update(&priv->temp.core[core_index]))
+ return 0;
+
+ rc = peci_client_rd_pkg_cfg_cmd(priv->mfd, MBX_INDEX_PER_CORE_DTS_TEMP,
+ core_index, pkg_cfg);
+ if (rc)
+ return rc;
+
+ core_dts_margin = le16_to_cpup((__le16 *)pkg_cfg);
+
+ /**
+ * Processors return a value of the core DTS reading in 10.6 format
+ * (10 bits signed decimal, 6 bits fractional).
+ * Error codes:
+ * 0x8000: General sensor error
+ * 0x8001: Reserved
+ * 0x8002: Underflow on reading value
+ * 0x8003-0x81ff: Reserved
+ */
+ if (core_dts_margin >= 0x8000 && core_dts_margin <= 0x81ff)
+ return -EIO;
+
+ core_dts_margin = ten_dot_six_to_millidegree(core_dts_margin);
+
+ /* Note that the tjmax should be available before calling it */
+ priv->temp.core[core_index].value = priv->temp.tjmax.value +
+ core_dts_margin;
+
+ peci_temp_mark_updated(&priv->temp.core[core_index]);
+
+ return 0;
+}
+
+static int cputemp_read_string(struct device *dev,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel, const char **str)
+{
+ if (attr != hwmon_temp_label)
+ return -EOPNOTSUPP;
+
+ *str = cputemp_label[channel];
+ return 0;
+}
+
+static int cputemp_read(struct device *dev,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct peci_cputemp *priv = dev_get_drvdata(dev);
+ int rc, core_index;
+
+ if (channel >= CPUTEMP_CHANNEL_NUMS ||
+ !(priv->temp_config[channel] & BIT(attr)))
+ return -EOPNOTSUPP;
+
+ rc = get_temp_targets(priv);
+ if (rc)
+ return rc;
+
+ switch (attr) {
+ case hwmon_temp_input:
+ switch (channel) {
+ case channel_die:
+ rc = get_die_temp(priv);
+ if (rc)
+ break;
+
+ *val = priv->temp.die.value;
+ break;
+ case channel_tcontrol:
+ *val = priv->temp.tcontrol.value;
+ break;
+ case channel_tthrottle:
+ *val = priv->temp.tthrottle.value;
+ break;
+ case channel_tjmax:
+ *val = priv->temp.tjmax.value;
+ break;
+ default:
+ core_index = channel - DEFAULT_CHANNEL_NUMS;
+ rc = get_core_temp(priv, core_index);
+ if (rc)
+ break;
+
+ *val = priv->temp.core[core_index].value;
+ break;
+ }
+ break;
+ case hwmon_temp_max:
+ *val = priv->temp.tcontrol.value;
+ break;
+ case hwmon_temp_crit:
+ *val = priv->temp.tjmax.value;
+ break;
+ case hwmon_temp_crit_hyst:
+ *val = priv->temp.tjmax.value - priv->temp.tcontrol.value;
+ break;
+ default:
+ rc = -EOPNOTSUPP;
+ break;
+ }
+
+ return rc;
+}
+
+static umode_t cputemp_is_visible(const void *data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ const struct peci_cputemp *priv = data;
+
+ if (priv->temp_config[channel] & BIT(attr))
+ if (channel < DEFAULT_CHANNEL_NUMS ||
+ (channel >= DEFAULT_CHANNEL_NUMS &&
+ (priv->core_mask & BIT(channel - DEFAULT_CHANNEL_NUMS))))
+ return 0444;
+
+ return 0;
+}
+
+static const struct hwmon_ops cputemp_ops = {
+ .is_visible = cputemp_is_visible,
+ .read_string = cputemp_read_string,
+ .read = cputemp_read,
+};
+
+static int check_resolved_cores(struct peci_cputemp *priv)
+{
+ struct peci_rd_pci_cfg_local_msg msg;
+ int rc;
+
+ /* Get the RESOLVED_CORES register value */
+ msg.addr = priv->addr;
+ msg.bus = REG_RESOLVED_CORES_BUS;
+ msg.device = REG_RESOLVED_CORES_DEVICE;
+ msg.function = REG_RESOLVED_CORES_FUNCTION;
+ msg.reg = REG_RESOLVED_CORES_OFFSET;
+ msg.rx_len = 4;
+
+ rc = peci_client_command(priv->mfd, PECI_CMD_RD_PCI_CFG_LOCAL, &msg);
+ if (rc)
+ return rc;
+
+ priv->core_mask = le32_to_cpup((__le32 *)msg.pci_config);
+ if (!priv->core_mask)
+ return -EAGAIN;
+
+ dev_dbg(priv->dev, "Scanned resolved cores: 0x%x\n", priv->core_mask);
+ return 0;
+}
+
+static int create_core_temp_info(struct peci_cputemp *priv)
+{
+ int rc, i;
+
+ rc = check_resolved_cores(priv);
+ if (rc)
+ return rc;
+
+ for (i = 0; i < priv->gen_info->core_max; i++)
+ if (priv->core_mask & BIT(i))
+ while (i + DEFAULT_CHANNEL_NUMS >= priv->config_idx)
+ priv->temp_config[priv->config_idx++] =
+ config_table[channel_core];
+
+ return 0;
+}
+
+static int peci_cputemp_probe(struct platform_device *pdev)
+{
+ struct peci_mfd *mfd = dev_get_drvdata(pdev->dev.parent);
+ struct device *dev = &pdev->dev;
+ struct peci_cputemp *priv;
+ struct device *hwmon_dev;
+ int rc;
+
+ if ((mfd->adapter->cmd_mask &
+ (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG))) !=
+ (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG)))
+ return -ENODEV;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, priv);
+ priv->mfd = mfd;
+ priv->dev = dev;
+ priv->addr = mfd->addr;
+ priv->gen_info = mfd->gen_info;
+
+ snprintf(priv->name, PECI_NAME_SIZE, "peci_cputemp.cpu%d", mfd->cpu_no);
+
+ priv->temp_config[priv->config_idx++] = config_table[channel_die];
+ priv->temp_config[priv->config_idx++] = config_table[channel_tcontrol];
+ priv->temp_config[priv->config_idx++] = config_table[channel_tthrottle];
+ priv->temp_config[priv->config_idx++] = config_table[channel_tjmax];
+
+ rc = create_core_temp_info(priv);
+ if (rc)
+ dev_dbg(dev, "Skipped creating core temp info\n");
+
+ priv->chip.ops = &cputemp_ops;
+ priv->chip.info = priv->info;
+
+ priv->info[0] = &priv->temp_info;
+
+ priv->temp_info.type = hwmon_temp;
+ priv->temp_info.config = priv->temp_config;
+
+ hwmon_dev = devm_hwmon_device_register_with_info(priv->dev,
+ priv->name,
+ priv,
+ &priv->chip,
+ NULL);
+
+ if (IS_ERR(hwmon_dev))
+ return PTR_ERR(hwmon_dev);
+
+ dev_dbg(dev, "%s: sensor '%s'\n", dev_name(hwmon_dev), priv->name);
+
+ return 0;
+}
+
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id peci_cputemp_of_table[] = {
+ { .compatible = "intel,peci-cputemp" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, peci_cputemp_of_table);
+#endif
+
+static const struct platform_device_id peci_cputemp_ids[] = {
+ { .name = "peci-cputemp", .driver_data = 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, peci_cputemp_ids);
+
+static struct platform_driver peci_cputemp_driver = {
+ .probe = peci_cputemp_probe,
+ .id_table = peci_cputemp_ids,
+ .driver = {
+ .name = "peci-cputemp",
+ .of_match_table = of_match_ptr(peci_cputemp_of_table),
+ },
+};
+module_platform_driver(peci_cputemp_driver);
+
+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");
+MODULE_DESCRIPTION("PECI cputemp driver");
+MODULE_LICENSE("GPL v2");
--
2.18.0
^ permalink raw reply related
* [PATCH v7 09/12] Documentation: hwmon: Add documents for PECI hwmon client drivers
From: Jae Hyun Yoo @ 2018-07-23 21:47 UTC (permalink / raw)
To: Jean Delvare, Guenter Roeck, Rob Herring, Mark Rutland, Lee Jones,
Joel Stanley, Andrew Jeffery, Jonathan Corbet, Greg Kroah-Hartman,
Gustavo Pimentel, Kishon Vijay Abraham I, Lorenzo Pieralisi,
Darrick J . Wong, Eric Sandeen, Arnd Bergmann, Wu Hao,
Tomohiro Kusumi, Bryant G . Ly, Frederic Barrat, David
Cc: linux-hwmon, devicetree, linux-kernel, linux-arm-kernel,
linux-aspeed, linux-doc, openbmc, Jae Hyun Yoo, Jason M Biils
In-Reply-To: <20180723214751.1733-1-jae.hyun.yoo@linux.intel.com>
This commit adds hwmon documents for PECI cputemp and dimmtemp drivers.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Reviewed-by: James Feist <james.feist@linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
---
Documentation/hwmon/peci-cputemp | 78 +++++++++++++++++++++++++++++++
Documentation/hwmon/peci-dimmtemp | 50 ++++++++++++++++++++
2 files changed, 128 insertions(+)
create mode 100644 Documentation/hwmon/peci-cputemp
create mode 100644 Documentation/hwmon/peci-dimmtemp
diff --git a/Documentation/hwmon/peci-cputemp b/Documentation/hwmon/peci-cputemp
new file mode 100644
index 000000000000..821a9258f2e6
--- /dev/null
+++ b/Documentation/hwmon/peci-cputemp
@@ -0,0 +1,78 @@
+Kernel driver peci-cputemp
+==========================
+
+Supported chips:
+ One of Intel server CPUs listed below which is connected to a PECI bus.
+ * Intel Xeon E5/E7 v3 server processors
+ Intel Xeon E5-14xx v3 family
+ Intel Xeon E5-24xx v3 family
+ Intel Xeon E5-16xx v3 family
+ Intel Xeon E5-26xx v3 family
+ Intel Xeon E5-46xx v3 family
+ Intel Xeon E7-48xx v3 family
+ Intel Xeon E7-88xx v3 family
+ * Intel Xeon E5/E7 v4 server processors
+ Intel Xeon E5-16xx v4 family
+ Intel Xeon E5-26xx v4 family
+ Intel Xeon E5-46xx v4 family
+ Intel Xeon E7-48xx v4 family
+ Intel Xeon E7-88xx v4 family
+ * Intel Xeon Scalable server processors
+ Intel Xeon Bronze family
+ Intel Xeon Silver family
+ Intel Xeon Gold family
+ Intel Xeon Platinum family
+ Addresses scanned: PECI client address 0x30 - 0x37
+ Datasheet: Available from http://www.intel.com/design/literature.htm
+
+Author:
+ Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
+
+Description
+-----------
+
+This driver implements a generic PECI hwmon feature which provides Digital
+Thermal Sensor (DTS) thermal readings of the CPU package and CPU cores that are
+accessible using the PECI Client Command Suite via the processor PECI client.
+
+All temperature values are given in millidegree Celsius and will be measurable
+only when the target CPU is powered on.
+
+sysfs attributes
+----------------
+
+temp1_label "Die"
+temp1_input Provides current die temperature of the CPU package.
+temp1_max Provides thermal control temperature of the CPU package
+ which is also known as Tcontrol.
+temp1_crit Provides shutdown temperature of the CPU package which
+ is also known as the maximum processor junction
+ temperature, Tjmax or Tprochot.
+temp1_crit_hyst Provides the hysteresis value from Tcontrol to Tjmax of
+ the CPU package.
+
+temp2_label "Tcontrol"
+temp2_input Provides current Tcontrol temperature of the CPU
+ package which is also known as Fan Temperature target.
+ Indicates the relative value from thermal monitor trip
+ temperature at which fans should be engaged.
+temp2_crit Provides Tcontrol critical value of the CPU package
+ which is same to Tjmax.
+
+temp3_label "Tthrottle"
+temp3_input Provides current Tthrottle temperature of the CPU
+ package. Used for throttling temperature. If this value
+ is allowed and lower than Tjmax - the throttle will
+ occur and reported at lower than Tjmax.
+
+temp4_label "Tjmax"
+temp4_input Provides the maximum junction temperature, Tjmax of the
+ CPU package.
+
+temp[5-*]_label Provides string "Core X", where X is resolved core
+ number.
+temp[5-*]_input Provides current temperature of each core.
+temp[5-*]_max Provides thermal control temperature of the core.
+temp[5-*]_crit Provides shutdown temperature of the core.
+temp[5-*]_crit_hyst Provides the hysteresis value from Tcontrol to Tjmax of
+ the core.
diff --git a/Documentation/hwmon/peci-dimmtemp b/Documentation/hwmon/peci-dimmtemp
new file mode 100644
index 000000000000..c54f2526188c
--- /dev/null
+++ b/Documentation/hwmon/peci-dimmtemp
@@ -0,0 +1,50 @@
+Kernel driver peci-dimmtemp
+===========================
+
+Supported chips:
+ One of Intel server CPUs listed below which is connected to a PECI bus.
+ * Intel Xeon E5/E7 v3 server processors
+ Intel Xeon E5-14xx v3 family
+ Intel Xeon E5-24xx v3 family
+ Intel Xeon E5-16xx v3 family
+ Intel Xeon E5-26xx v3 family
+ Intel Xeon E5-46xx v3 family
+ Intel Xeon E7-48xx v3 family
+ Intel Xeon E7-88xx v3 family
+ * Intel Xeon E5/E7 v4 server processors
+ Intel Xeon E5-16xx v4 family
+ Intel Xeon E5-26xx v4 family
+ Intel Xeon E5-46xx v4 family
+ Intel Xeon E7-48xx v4 family
+ Intel Xeon E7-88xx v4 family
+ * Intel Xeon Scalable server processors
+ Intel Xeon Bronze family
+ Intel Xeon Silver family
+ Intel Xeon Gold family
+ Intel Xeon Platinum family
+ Addresses scanned: PECI client address 0x30 - 0x37
+ Datasheet: Available from http://www.intel.com/design/literature.htm
+
+Author:
+ Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
+
+Description
+-----------
+
+This driver implements a generic PECI hwmon feature which provides Digital
+Thermal Sensor (DTS) thermal readings of DIMM components that are accessible
+using the PECI Client Command Suite via the processor PECI client.
+
+All temperature values are given in millidegree Celsius and will be measurable
+only when the target CPU is powered on.
+
+sysfs attributes
+----------------
+
+temp[N]_label Provides string "DIMM CI", where C is DIMM channel and
+ I is DIMM index of the populated DIMM.
+temp[N]_input Provides current temperature of the populated DIMM.
+
+Note:
+ DIMM temperature attributes will appear when the client CPU's BIOS
+ completes memory training and testing.
--
2.18.0
^ permalink raw reply related
* [PATCH v7 09/12] Documentation: hwmon: Add documents for PECI hwmon client drivers
From: Jae Hyun Yoo @ 2018-07-23 21:47 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180723214751.1733-1-jae.hyun.yoo@linux.intel.com>
This commit adds hwmon documents for PECI cputemp and dimmtemp drivers.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Reviewed-by: James Feist <james.feist@linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
---
Documentation/hwmon/peci-cputemp | 78 +++++++++++++++++++++++++++++++
Documentation/hwmon/peci-dimmtemp | 50 ++++++++++++++++++++
2 files changed, 128 insertions(+)
create mode 100644 Documentation/hwmon/peci-cputemp
create mode 100644 Documentation/hwmon/peci-dimmtemp
diff --git a/Documentation/hwmon/peci-cputemp b/Documentation/hwmon/peci-cputemp
new file mode 100644
index 000000000000..821a9258f2e6
--- /dev/null
+++ b/Documentation/hwmon/peci-cputemp
@@ -0,0 +1,78 @@
+Kernel driver peci-cputemp
+==========================
+
+Supported chips:
+ One of Intel server CPUs listed below which is connected to a PECI bus.
+ * Intel Xeon E5/E7 v3 server processors
+ Intel Xeon E5-14xx v3 family
+ Intel Xeon E5-24xx v3 family
+ Intel Xeon E5-16xx v3 family
+ Intel Xeon E5-26xx v3 family
+ Intel Xeon E5-46xx v3 family
+ Intel Xeon E7-48xx v3 family
+ Intel Xeon E7-88xx v3 family
+ * Intel Xeon E5/E7 v4 server processors
+ Intel Xeon E5-16xx v4 family
+ Intel Xeon E5-26xx v4 family
+ Intel Xeon E5-46xx v4 family
+ Intel Xeon E7-48xx v4 family
+ Intel Xeon E7-88xx v4 family
+ * Intel Xeon Scalable server processors
+ Intel Xeon Bronze family
+ Intel Xeon Silver family
+ Intel Xeon Gold family
+ Intel Xeon Platinum family
+ Addresses scanned: PECI client address 0x30 - 0x37
+ Datasheet: Available from http://www.intel.com/design/literature.htm
+
+Author:
+ Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
+
+Description
+-----------
+
+This driver implements a generic PECI hwmon feature which provides Digital
+Thermal Sensor (DTS) thermal readings of the CPU package and CPU cores that are
+accessible using the PECI Client Command Suite via the processor PECI client.
+
+All temperature values are given in millidegree Celsius and will be measurable
+only when the target CPU is powered on.
+
+sysfs attributes
+----------------
+
+temp1_label "Die"
+temp1_input Provides current die temperature of the CPU package.
+temp1_max Provides thermal control temperature of the CPU package
+ which is also known as Tcontrol.
+temp1_crit Provides shutdown temperature of the CPU package which
+ is also known as the maximum processor junction
+ temperature, Tjmax or Tprochot.
+temp1_crit_hyst Provides the hysteresis value from Tcontrol to Tjmax of
+ the CPU package.
+
+temp2_label "Tcontrol"
+temp2_input Provides current Tcontrol temperature of the CPU
+ package which is also known as Fan Temperature target.
+ Indicates the relative value from thermal monitor trip
+ temperature at which fans should be engaged.
+temp2_crit Provides Tcontrol critical value of the CPU package
+ which is same to Tjmax.
+
+temp3_label "Tthrottle"
+temp3_input Provides current Tthrottle temperature of the CPU
+ package. Used for throttling temperature. If this value
+ is allowed and lower than Tjmax - the throttle will
+ occur and reported at lower than Tjmax.
+
+temp4_label "Tjmax"
+temp4_input Provides the maximum junction temperature, Tjmax of the
+ CPU package.
+
+temp[5-*]_label Provides string "Core X", where X is resolved core
+ number.
+temp[5-*]_input Provides current temperature of each core.
+temp[5-*]_max Provides thermal control temperature of the core.
+temp[5-*]_crit Provides shutdown temperature of the core.
+temp[5-*]_crit_hyst Provides the hysteresis value from Tcontrol to Tjmax of
+ the core.
diff --git a/Documentation/hwmon/peci-dimmtemp b/Documentation/hwmon/peci-dimmtemp
new file mode 100644
index 000000000000..c54f2526188c
--- /dev/null
+++ b/Documentation/hwmon/peci-dimmtemp
@@ -0,0 +1,50 @@
+Kernel driver peci-dimmtemp
+===========================
+
+Supported chips:
+ One of Intel server CPUs listed below which is connected to a PECI bus.
+ * Intel Xeon E5/E7 v3 server processors
+ Intel Xeon E5-14xx v3 family
+ Intel Xeon E5-24xx v3 family
+ Intel Xeon E5-16xx v3 family
+ Intel Xeon E5-26xx v3 family
+ Intel Xeon E5-46xx v3 family
+ Intel Xeon E7-48xx v3 family
+ Intel Xeon E7-88xx v3 family
+ * Intel Xeon E5/E7 v4 server processors
+ Intel Xeon E5-16xx v4 family
+ Intel Xeon E5-26xx v4 family
+ Intel Xeon E5-46xx v4 family
+ Intel Xeon E7-48xx v4 family
+ Intel Xeon E7-88xx v4 family
+ * Intel Xeon Scalable server processors
+ Intel Xeon Bronze family
+ Intel Xeon Silver family
+ Intel Xeon Gold family
+ Intel Xeon Platinum family
+ Addresses scanned: PECI client address 0x30 - 0x37
+ Datasheet: Available from http://www.intel.com/design/literature.htm
+
+Author:
+ Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
+
+Description
+-----------
+
+This driver implements a generic PECI hwmon feature which provides Digital
+Thermal Sensor (DTS) thermal readings of DIMM components that are accessible
+using the PECI Client Command Suite via the processor PECI client.
+
+All temperature values are given in millidegree Celsius and will be measurable
+only when the target CPU is powered on.
+
+sysfs attributes
+----------------
+
+temp[N]_label Provides string "DIMM CI", where C is DIMM channel and
+ I is DIMM index of the populated DIMM.
+temp[N]_input Provides current temperature of the populated DIMM.
+
+Note:
+ DIMM temperature attributes will appear when the client CPU's BIOS
+ completes memory training and testing.
--
2.18.0
^ permalink raw reply related
* [PATCH v7 09/12] Documentation: hwmon: Add documents for PECI hwmon client drivers
From: Jae Hyun Yoo @ 2018-07-23 21:47 UTC (permalink / raw)
To: linux-aspeed
In-Reply-To: <20180723214751.1733-1-jae.hyun.yoo@linux.intel.com>
This commit adds hwmon documents for PECI cputemp and dimmtemp drivers.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Reviewed-by: James Feist <james.feist@linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
---
Documentation/hwmon/peci-cputemp | 78 +++++++++++++++++++++++++++++++
Documentation/hwmon/peci-dimmtemp | 50 ++++++++++++++++++++
2 files changed, 128 insertions(+)
create mode 100644 Documentation/hwmon/peci-cputemp
create mode 100644 Documentation/hwmon/peci-dimmtemp
diff --git a/Documentation/hwmon/peci-cputemp b/Documentation/hwmon/peci-cputemp
new file mode 100644
index 000000000000..821a9258f2e6
--- /dev/null
+++ b/Documentation/hwmon/peci-cputemp
@@ -0,0 +1,78 @@
+Kernel driver peci-cputemp
+==========================
+
+Supported chips:
+ One of Intel server CPUs listed below which is connected to a PECI bus.
+ * Intel Xeon E5/E7 v3 server processors
+ Intel Xeon E5-14xx v3 family
+ Intel Xeon E5-24xx v3 family
+ Intel Xeon E5-16xx v3 family
+ Intel Xeon E5-26xx v3 family
+ Intel Xeon E5-46xx v3 family
+ Intel Xeon E7-48xx v3 family
+ Intel Xeon E7-88xx v3 family
+ * Intel Xeon E5/E7 v4 server processors
+ Intel Xeon E5-16xx v4 family
+ Intel Xeon E5-26xx v4 family
+ Intel Xeon E5-46xx v4 family
+ Intel Xeon E7-48xx v4 family
+ Intel Xeon E7-88xx v4 family
+ * Intel Xeon Scalable server processors
+ Intel Xeon Bronze family
+ Intel Xeon Silver family
+ Intel Xeon Gold family
+ Intel Xeon Platinum family
+ Addresses scanned: PECI client address 0x30 - 0x37
+ Datasheet: Available from http://www.intel.com/design/literature.htm
+
+Author:
+ Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
+
+Description
+-----------
+
+This driver implements a generic PECI hwmon feature which provides Digital
+Thermal Sensor (DTS) thermal readings of the CPU package and CPU cores that are
+accessible using the PECI Client Command Suite via the processor PECI client.
+
+All temperature values are given in millidegree Celsius and will be measurable
+only when the target CPU is powered on.
+
+sysfs attributes
+----------------
+
+temp1_label "Die"
+temp1_input Provides current die temperature of the CPU package.
+temp1_max Provides thermal control temperature of the CPU package
+ which is also known as Tcontrol.
+temp1_crit Provides shutdown temperature of the CPU package which
+ is also known as the maximum processor junction
+ temperature, Tjmax or Tprochot.
+temp1_crit_hyst Provides the hysteresis value from Tcontrol to Tjmax of
+ the CPU package.
+
+temp2_label "Tcontrol"
+temp2_input Provides current Tcontrol temperature of the CPU
+ package which is also known as Fan Temperature target.
+ Indicates the relative value from thermal monitor trip
+ temperature at which fans should be engaged.
+temp2_crit Provides Tcontrol critical value of the CPU package
+ which is same to Tjmax.
+
+temp3_label "Tthrottle"
+temp3_input Provides current Tthrottle temperature of the CPU
+ package. Used for throttling temperature. If this value
+ is allowed and lower than Tjmax - the throttle will
+ occur and reported at lower than Tjmax.
+
+temp4_label "Tjmax"
+temp4_input Provides the maximum junction temperature, Tjmax of the
+ CPU package.
+
+temp[5-*]_label Provides string "Core X", where X is resolved core
+ number.
+temp[5-*]_input Provides current temperature of each core.
+temp[5-*]_max Provides thermal control temperature of the core.
+temp[5-*]_crit Provides shutdown temperature of the core.
+temp[5-*]_crit_hyst Provides the hysteresis value from Tcontrol to Tjmax of
+ the core.
diff --git a/Documentation/hwmon/peci-dimmtemp b/Documentation/hwmon/peci-dimmtemp
new file mode 100644
index 000000000000..c54f2526188c
--- /dev/null
+++ b/Documentation/hwmon/peci-dimmtemp
@@ -0,0 +1,50 @@
+Kernel driver peci-dimmtemp
+===========================
+
+Supported chips:
+ One of Intel server CPUs listed below which is connected to a PECI bus.
+ * Intel Xeon E5/E7 v3 server processors
+ Intel Xeon E5-14xx v3 family
+ Intel Xeon E5-24xx v3 family
+ Intel Xeon E5-16xx v3 family
+ Intel Xeon E5-26xx v3 family
+ Intel Xeon E5-46xx v3 family
+ Intel Xeon E7-48xx v3 family
+ Intel Xeon E7-88xx v3 family
+ * Intel Xeon E5/E7 v4 server processors
+ Intel Xeon E5-16xx v4 family
+ Intel Xeon E5-26xx v4 family
+ Intel Xeon E5-46xx v4 family
+ Intel Xeon E7-48xx v4 family
+ Intel Xeon E7-88xx v4 family
+ * Intel Xeon Scalable server processors
+ Intel Xeon Bronze family
+ Intel Xeon Silver family
+ Intel Xeon Gold family
+ Intel Xeon Platinum family
+ Addresses scanned: PECI client address 0x30 - 0x37
+ Datasheet: Available from http://www.intel.com/design/literature.htm
+
+Author:
+ Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
+
+Description
+-----------
+
+This driver implements a generic PECI hwmon feature which provides Digital
+Thermal Sensor (DTS) thermal readings of DIMM components that are accessible
+using the PECI Client Command Suite via the processor PECI client.
+
+All temperature values are given in millidegree Celsius and will be measurable
+only when the target CPU is powered on.
+
+sysfs attributes
+----------------
+
+temp[N]_label Provides string "DIMM CI", where C is DIMM channel and
+ I is DIMM index of the populated DIMM.
+temp[N]_input Provides current temperature of the populated DIMM.
+
+Note:
+ DIMM temperature attributes will appear when the client CPU's BIOS
+ completes memory training and testing.
--
2.18.0
^ permalink raw reply related
* [PATCH v7 08/12] mfd: intel-peci-client: Add PECI client MFD driver
From: Jae Hyun Yoo @ 2018-07-23 21:47 UTC (permalink / raw)
To: Jean Delvare, Guenter Roeck, Rob Herring, Mark Rutland, Lee Jones,
Joel Stanley, Andrew Jeffery, Jonathan Corbet, Greg Kroah-Hartman,
Gustavo Pimentel, Kishon Vijay Abraham I, Lorenzo Pieralisi,
Darrick J . Wong, Eric Sandeen, Arnd Bergmann, Wu Hao,
Tomohiro Kusumi, Bryant G . Ly, Frederic Barrat, David
Cc: linux-hwmon, devicetree, linux-kernel, linux-arm-kernel,
linux-aspeed, linux-doc, openbmc, Jae Hyun Yoo, James Feist,
Jason M Biils, Vernon Mauery
In-Reply-To: <20180723214751.1733-1-jae.hyun.yoo@linux.intel.com>
This commit adds PECI client MFD driver.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: James Feist <james.feist@linux.intel.com>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Vernon Mauery <vernon.mauery@linux.intel.com>
---
drivers/mfd/Kconfig | 14 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/intel-peci-client.c | 182 ++++++++++++++++++++++++++
include/linux/mfd/intel-peci-client.h | 81 ++++++++++++
4 files changed, 278 insertions(+)
create mode 100644 drivers/mfd/intel-peci-client.c
create mode 100644 include/linux/mfd/intel-peci-client.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index f3fa516011ec..e38b591479d4 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -595,6 +595,20 @@ config MFD_INTEL_MSIC
Passage) chip. This chip embeds audio, battery, GPIO, etc.
devices used in Intel Medfield platforms.
+config MFD_INTEL_PECI_CLIENT
+ bool "Intel PECI client"
+ depends on (PECI || COMPILE_TEST)
+ select MFD_CORE
+ help
+ If you say yes to this option, support will be included for the
+ multi-funtional Intel PECI (Platform Environment Control Interface)
+ client. PECI is a one-wire bus interface that provides a communication
+ channel from PECI clients in Intel processors and chipset components
+ to external monitoring or control devices.
+
+ Additional drivers must be enabled in order to use the functionality
+ of the device.
+
config MFD_IPAQ_MICRO
bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support"
depends on SA1100_H3100 || SA1100_H3600
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 2852a6042ecf..29e2cacc58bd 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -203,6 +203,7 @@ obj-$(CONFIG_MFD_INTEL_LPSS) += intel-lpss.o
obj-$(CONFIG_MFD_INTEL_LPSS_PCI) += intel-lpss-pci.o
obj-$(CONFIG_MFD_INTEL_LPSS_ACPI) += intel-lpss-acpi.o
obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
+obj-$(CONFIG_MFD_INTEL_PECI_CLIENT) += intel-peci-client.o
obj-$(CONFIG_MFD_PALMAS) += palmas.o
obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o
obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
diff --git a/drivers/mfd/intel-peci-client.c b/drivers/mfd/intel-peci-client.c
new file mode 100644
index 000000000000..d7702cf1ea50
--- /dev/null
+++ b/drivers/mfd/intel-peci-client.c
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Intel Corporation
+
+#include <linux/bitfield.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/intel-peci-client.h>
+#include <linux/module.h>
+#include <linux/peci.h>
+#include <linux/of_device.h>
+
+enum cpu_gens {
+ CPU_GEN_HSX = 0, /* Haswell Xeon */
+ CPU_GEN_BRX, /* Broadwell Xeon */
+ CPU_GEN_SKX, /* Skylake Xeon */
+};
+
+static struct mfd_cell peci_functions[] = {
+ {
+ .name = "peci-cputemp",
+ .of_compatible = "intel,peci-cputemp",
+ },
+ {
+ .name = "peci-dimmtemp",
+ .of_compatible = "intel,peci-dimmtemp",
+ },
+};
+
+static const struct cpu_gen_info cpu_gen_info_table[] = {
+ [CPU_GEN_HSX] = {
+ .family = 6, /* Family code */
+ .model = INTEL_FAM6_HASWELL_X,
+ .core_max = CORE_MAX_ON_HSX,
+ .chan_rank_max = CHAN_RANK_MAX_ON_HSX,
+ .dimm_idx_max = DIMM_IDX_MAX_ON_HSX },
+ [CPU_GEN_BRX] = {
+ .family = 6, /* Family code */
+ .model = INTEL_FAM6_BROADWELL_X,
+ .core_max = CORE_MAX_ON_BDX,
+ .chan_rank_max = CHAN_RANK_MAX_ON_BDX,
+ .dimm_idx_max = DIMM_IDX_MAX_ON_BDX },
+ [CPU_GEN_SKX] = {
+ .family = 6, /* Family code */
+ .model = INTEL_FAM6_SKYLAKE_X,
+ .core_max = CORE_MAX_ON_SKX,
+ .chan_rank_max = CHAN_RANK_MAX_ON_SKX,
+ .dimm_idx_max = DIMM_IDX_MAX_ON_SKX },
+};
+
+static int peci_client_get_cpu_gen_info(struct peci_mfd *priv)
+{
+ u32 cpu_id;
+ int i, rc;
+
+ rc = peci_get_cpu_id(priv->adapter, priv->addr, &cpu_id);
+ if (rc)
+ return rc;
+
+ for (i = 0; i < ARRAY_SIZE(cpu_gen_info_table); i++) {
+ if (FIELD_GET(CPU_ID_FAMILY_MASK, cpu_id) +
+ FIELD_GET(CPU_ID_EXT_FAMILY_MASK, cpu_id) ==
+ cpu_gen_info_table[i].family &&
+ FIELD_GET(CPU_ID_MODEL_MASK, cpu_id) ==
+ FIELD_GET(LOWER_NIBBLE_MASK,
+ cpu_gen_info_table[i].model) &&
+ FIELD_GET(CPU_ID_EXT_MODEL_MASK, cpu_id) ==
+ FIELD_GET(UPPER_NIBBLE_MASK,
+ cpu_gen_info_table[i].model)) {
+ break;
+ }
+ }
+
+ if (i >= ARRAY_SIZE(cpu_gen_info_table))
+ return -ENODEV;
+
+ priv->gen_info = &cpu_gen_info_table[i];
+
+ return 0;
+}
+
+bool peci_temp_need_update(struct temp_data *temp)
+{
+ if (temp->valid &&
+ time_before(jiffies, temp->last_updated + UPDATE_INTERVAL))
+ return false;
+
+ return true;
+}
+EXPORT_SYMBOL_GPL(peci_temp_need_update);
+
+void peci_temp_mark_updated(struct temp_data *temp)
+{
+ temp->valid = 1;
+ temp->last_updated = jiffies;
+}
+EXPORT_SYMBOL_GPL(peci_temp_mark_updated);
+
+int peci_client_command(struct peci_mfd *priv, enum peci_cmd cmd, void *vmsg)
+{
+ return peci_command(priv->adapter, cmd, vmsg);
+}
+EXPORT_SYMBOL_GPL(peci_client_command);
+
+int peci_client_rd_pkg_cfg_cmd(struct peci_mfd *priv, u8 mbx_idx,
+ u16 param, u8 *data)
+{
+ struct peci_rd_pkg_cfg_msg msg;
+ int rc;
+
+ msg.addr = priv->addr;
+ msg.index = mbx_idx;
+ msg.param = param;
+ msg.rx_len = 4;
+
+ rc = peci_command(priv->adapter, PECI_CMD_RD_PKG_CFG, &msg);
+ if (!rc)
+ memcpy(data, msg.pkg_config, 4);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(peci_client_rd_pkg_cfg_cmd);
+
+static int peci_client_probe(struct peci_client *client)
+{
+ struct device *dev = &client->dev;
+ struct peci_mfd *priv;
+ int rc;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, priv);
+ priv->client = client;
+ priv->dev = dev;
+ priv->adapter = client->adapter;
+ priv->addr = client->addr;
+ priv->cpu_no = client->addr - PECI_BASE_ADDR;
+
+ snprintf(priv->name, PECI_NAME_SIZE, "peci_client.cpu%d", priv->cpu_no);
+
+ rc = peci_client_get_cpu_gen_info(priv);
+ if (rc)
+ return rc;
+
+ rc = devm_mfd_add_devices(priv->dev, priv->cpu_no, peci_functions,
+ ARRAY_SIZE(peci_functions), NULL, 0, NULL);
+ if (rc < 0) {
+ dev_err(priv->dev, "devm_mfd_add_devices failed: %d\n", rc);
+ return rc;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id peci_client_of_table[] = {
+ { .compatible = "intel,peci-client" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, peci_client_of_table);
+#endif
+
+static const struct peci_device_id peci_client_ids[] = {
+ { .name = "peci-client", .driver_data = 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(peci, peci_client_ids);
+
+static struct peci_driver peci_client_driver = {
+ .probe = peci_client_probe,
+ .id_table = peci_client_ids,
+ .driver = {
+ .name = "peci-client",
+ .of_match_table =
+ of_match_ptr(peci_client_of_table),
+ },
+};
+module_peci_driver(peci_client_driver);
+
+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");
+MODULE_DESCRIPTION("PECI client MFD driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/intel-peci-client.h b/include/linux/mfd/intel-peci-client.h
new file mode 100644
index 000000000000..7ec272cddceb
--- /dev/null
+++ b/include/linux/mfd/intel-peci-client.h
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2018 Intel Corporation */
+
+#ifndef __LINUX_MFD_PECI_CLIENT_H
+#define __LINUX_MFD_PECI_CLIENT_H
+
+#include <linux/peci.h>
+
+#if IS_ENABLED(CONFIG_X86)
+#include <asm/intel-family.h>
+#else
+/**
+ * Architectures other than x86 cannot include the header file so define these
+ * at here. These are needed for detecting type of client x86 CPUs behind a PECI
+ * connection.
+ */
+#define INTEL_FAM6_HASWELL_X 0x3F
+#define INTEL_FAM6_BROADWELL_X 0x4F
+#define INTEL_FAM6_SKYLAKE_X 0x55
+#endif
+
+#define LOWER_NIBBLE_MASK GENMASK(3, 0)
+#define UPPER_NIBBLE_MASK GENMASK(7, 4)
+
+#define CPU_ID_MODEL_MASK GENMASK(7, 4)
+#define CPU_ID_FAMILY_MASK GENMASK(11, 8)
+#define CPU_ID_EXT_MODEL_MASK GENMASK(19, 16)
+#define CPU_ID_EXT_FAMILY_MASK GENMASK(27, 20)
+
+#define CORE_MAX_ON_HSX 18 /* Max number of cores on Haswell */
+#define CHAN_RANK_MAX_ON_HSX 8 /* Max number of channel ranks on Haswell */
+#define DIMM_IDX_MAX_ON_HSX 3 /* Max DIMM index per channel on Haswell */
+
+#define CORE_MAX_ON_BDX 24 /* Max number of cores on Broadwell */
+#define CHAN_RANK_MAX_ON_BDX 4 /* Max number of channel ranks on Broadwell */
+#define DIMM_IDX_MAX_ON_BDX 3 /* Max DIMM index per channel on Broadwell */
+
+#define CORE_MAX_ON_SKX 28 /* Max number of cores on Skylake */
+#define CHAN_RANK_MAX_ON_SKX 6 /* Max number of channel ranks on Skylake */
+#define DIMM_IDX_MAX_ON_SKX 2 /* Max DIMM index per channel on Skylake */
+
+#define CORE_NUMS_MAX CORE_MAX_ON_SKX
+#define CHAN_RANK_MAX CHAN_RANK_MAX_ON_HSX
+#define DIMM_IDX_MAX DIMM_IDX_MAX_ON_HSX
+#define DIMM_NUMS_MAX (CHAN_RANK_MAX * DIMM_IDX_MAX)
+
+#define TEMP_TYPE_PECI 6 /* Sensor type 6: Intel PECI */
+
+#define UPDATE_INTERVAL HZ
+
+struct temp_data {
+ uint valid;
+ s32 value;
+ ulong last_updated;
+};
+
+struct cpu_gen_info {
+ u16 family;
+ u8 model;
+ uint core_max;
+ uint chan_rank_max;
+ uint dimm_idx_max;
+};
+
+struct peci_mfd {
+ struct peci_client *client;
+ struct device *dev;
+ struct peci_adapter *adapter;
+ char name[PECI_NAME_SIZE];
+ u8 addr;
+ uint cpu_no;
+ const struct cpu_gen_info *gen_info;
+};
+
+bool peci_temp_need_update(struct temp_data *temp);
+void peci_temp_mark_updated(struct temp_data *temp);
+int peci_client_command(struct peci_mfd *mfd, enum peci_cmd cmd, void *vmsg);
+int peci_client_rd_pkg_cfg_cmd(struct peci_mfd *mfd, u8 mbx_idx,
+ u16 param, u8 *data);
+
+#endif /* __LINUX_MFD_PECI_CLIENT_H */
--
2.18.0
^ permalink raw reply related
* [PATCH v7 08/12] mfd: intel-peci-client: Add PECI client MFD driver
From: Jae Hyun Yoo @ 2018-07-23 21:47 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180723214751.1733-1-jae.hyun.yoo@linux.intel.com>
This commit adds PECI client MFD driver.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: James Feist <james.feist@linux.intel.com>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Vernon Mauery <vernon.mauery@linux.intel.com>
---
drivers/mfd/Kconfig | 14 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/intel-peci-client.c | 182 ++++++++++++++++++++++++++
include/linux/mfd/intel-peci-client.h | 81 ++++++++++++
4 files changed, 278 insertions(+)
create mode 100644 drivers/mfd/intel-peci-client.c
create mode 100644 include/linux/mfd/intel-peci-client.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index f3fa516011ec..e38b591479d4 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -595,6 +595,20 @@ config MFD_INTEL_MSIC
Passage) chip. This chip embeds audio, battery, GPIO, etc.
devices used in Intel Medfield platforms.
+config MFD_INTEL_PECI_CLIENT
+ bool "Intel PECI client"
+ depends on (PECI || COMPILE_TEST)
+ select MFD_CORE
+ help
+ If you say yes to this option, support will be included for the
+ multi-funtional Intel PECI (Platform Environment Control Interface)
+ client. PECI is a one-wire bus interface that provides a communication
+ channel from PECI clients in Intel processors and chipset components
+ to external monitoring or control devices.
+
+ Additional drivers must be enabled in order to use the functionality
+ of the device.
+
config MFD_IPAQ_MICRO
bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support"
depends on SA1100_H3100 || SA1100_H3600
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 2852a6042ecf..29e2cacc58bd 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -203,6 +203,7 @@ obj-$(CONFIG_MFD_INTEL_LPSS) += intel-lpss.o
obj-$(CONFIG_MFD_INTEL_LPSS_PCI) += intel-lpss-pci.o
obj-$(CONFIG_MFD_INTEL_LPSS_ACPI) += intel-lpss-acpi.o
obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
+obj-$(CONFIG_MFD_INTEL_PECI_CLIENT) += intel-peci-client.o
obj-$(CONFIG_MFD_PALMAS) += palmas.o
obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o
obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
diff --git a/drivers/mfd/intel-peci-client.c b/drivers/mfd/intel-peci-client.c
new file mode 100644
index 000000000000..d7702cf1ea50
--- /dev/null
+++ b/drivers/mfd/intel-peci-client.c
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Intel Corporation
+
+#include <linux/bitfield.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/intel-peci-client.h>
+#include <linux/module.h>
+#include <linux/peci.h>
+#include <linux/of_device.h>
+
+enum cpu_gens {
+ CPU_GEN_HSX = 0, /* Haswell Xeon */
+ CPU_GEN_BRX, /* Broadwell Xeon */
+ CPU_GEN_SKX, /* Skylake Xeon */
+};
+
+static struct mfd_cell peci_functions[] = {
+ {
+ .name = "peci-cputemp",
+ .of_compatible = "intel,peci-cputemp",
+ },
+ {
+ .name = "peci-dimmtemp",
+ .of_compatible = "intel,peci-dimmtemp",
+ },
+};
+
+static const struct cpu_gen_info cpu_gen_info_table[] = {
+ [CPU_GEN_HSX] = {
+ .family = 6, /* Family code */
+ .model = INTEL_FAM6_HASWELL_X,
+ .core_max = CORE_MAX_ON_HSX,
+ .chan_rank_max = CHAN_RANK_MAX_ON_HSX,
+ .dimm_idx_max = DIMM_IDX_MAX_ON_HSX },
+ [CPU_GEN_BRX] = {
+ .family = 6, /* Family code */
+ .model = INTEL_FAM6_BROADWELL_X,
+ .core_max = CORE_MAX_ON_BDX,
+ .chan_rank_max = CHAN_RANK_MAX_ON_BDX,
+ .dimm_idx_max = DIMM_IDX_MAX_ON_BDX },
+ [CPU_GEN_SKX] = {
+ .family = 6, /* Family code */
+ .model = INTEL_FAM6_SKYLAKE_X,
+ .core_max = CORE_MAX_ON_SKX,
+ .chan_rank_max = CHAN_RANK_MAX_ON_SKX,
+ .dimm_idx_max = DIMM_IDX_MAX_ON_SKX },
+};
+
+static int peci_client_get_cpu_gen_info(struct peci_mfd *priv)
+{
+ u32 cpu_id;
+ int i, rc;
+
+ rc = peci_get_cpu_id(priv->adapter, priv->addr, &cpu_id);
+ if (rc)
+ return rc;
+
+ for (i = 0; i < ARRAY_SIZE(cpu_gen_info_table); i++) {
+ if (FIELD_GET(CPU_ID_FAMILY_MASK, cpu_id) +
+ FIELD_GET(CPU_ID_EXT_FAMILY_MASK, cpu_id) ==
+ cpu_gen_info_table[i].family &&
+ FIELD_GET(CPU_ID_MODEL_MASK, cpu_id) ==
+ FIELD_GET(LOWER_NIBBLE_MASK,
+ cpu_gen_info_table[i].model) &&
+ FIELD_GET(CPU_ID_EXT_MODEL_MASK, cpu_id) ==
+ FIELD_GET(UPPER_NIBBLE_MASK,
+ cpu_gen_info_table[i].model)) {
+ break;
+ }
+ }
+
+ if (i >= ARRAY_SIZE(cpu_gen_info_table))
+ return -ENODEV;
+
+ priv->gen_info = &cpu_gen_info_table[i];
+
+ return 0;
+}
+
+bool peci_temp_need_update(struct temp_data *temp)
+{
+ if (temp->valid &&
+ time_before(jiffies, temp->last_updated + UPDATE_INTERVAL))
+ return false;
+
+ return true;
+}
+EXPORT_SYMBOL_GPL(peci_temp_need_update);
+
+void peci_temp_mark_updated(struct temp_data *temp)
+{
+ temp->valid = 1;
+ temp->last_updated = jiffies;
+}
+EXPORT_SYMBOL_GPL(peci_temp_mark_updated);
+
+int peci_client_command(struct peci_mfd *priv, enum peci_cmd cmd, void *vmsg)
+{
+ return peci_command(priv->adapter, cmd, vmsg);
+}
+EXPORT_SYMBOL_GPL(peci_client_command);
+
+int peci_client_rd_pkg_cfg_cmd(struct peci_mfd *priv, u8 mbx_idx,
+ u16 param, u8 *data)
+{
+ struct peci_rd_pkg_cfg_msg msg;
+ int rc;
+
+ msg.addr = priv->addr;
+ msg.index = mbx_idx;
+ msg.param = param;
+ msg.rx_len = 4;
+
+ rc = peci_command(priv->adapter, PECI_CMD_RD_PKG_CFG, &msg);
+ if (!rc)
+ memcpy(data, msg.pkg_config, 4);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(peci_client_rd_pkg_cfg_cmd);
+
+static int peci_client_probe(struct peci_client *client)
+{
+ struct device *dev = &client->dev;
+ struct peci_mfd *priv;
+ int rc;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, priv);
+ priv->client = client;
+ priv->dev = dev;
+ priv->adapter = client->adapter;
+ priv->addr = client->addr;
+ priv->cpu_no = client->addr - PECI_BASE_ADDR;
+
+ snprintf(priv->name, PECI_NAME_SIZE, "peci_client.cpu%d", priv->cpu_no);
+
+ rc = peci_client_get_cpu_gen_info(priv);
+ if (rc)
+ return rc;
+
+ rc = devm_mfd_add_devices(priv->dev, priv->cpu_no, peci_functions,
+ ARRAY_SIZE(peci_functions), NULL, 0, NULL);
+ if (rc < 0) {
+ dev_err(priv->dev, "devm_mfd_add_devices failed: %d\n", rc);
+ return rc;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id peci_client_of_table[] = {
+ { .compatible = "intel,peci-client" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, peci_client_of_table);
+#endif
+
+static const struct peci_device_id peci_client_ids[] = {
+ { .name = "peci-client", .driver_data = 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(peci, peci_client_ids);
+
+static struct peci_driver peci_client_driver = {
+ .probe = peci_client_probe,
+ .id_table = peci_client_ids,
+ .driver = {
+ .name = "peci-client",
+ .of_match_table =
+ of_match_ptr(peci_client_of_table),
+ },
+};
+module_peci_driver(peci_client_driver);
+
+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");
+MODULE_DESCRIPTION("PECI client MFD driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/intel-peci-client.h b/include/linux/mfd/intel-peci-client.h
new file mode 100644
index 000000000000..7ec272cddceb
--- /dev/null
+++ b/include/linux/mfd/intel-peci-client.h
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2018 Intel Corporation */
+
+#ifndef __LINUX_MFD_PECI_CLIENT_H
+#define __LINUX_MFD_PECI_CLIENT_H
+
+#include <linux/peci.h>
+
+#if IS_ENABLED(CONFIG_X86)
+#include <asm/intel-family.h>
+#else
+/**
+ * Architectures other than x86 cannot include the header file so define these
+ * at here. These are needed for detecting type of client x86 CPUs behind a PECI
+ * connection.
+ */
+#define INTEL_FAM6_HASWELL_X 0x3F
+#define INTEL_FAM6_BROADWELL_X 0x4F
+#define INTEL_FAM6_SKYLAKE_X 0x55
+#endif
+
+#define LOWER_NIBBLE_MASK GENMASK(3, 0)
+#define UPPER_NIBBLE_MASK GENMASK(7, 4)
+
+#define CPU_ID_MODEL_MASK GENMASK(7, 4)
+#define CPU_ID_FAMILY_MASK GENMASK(11, 8)
+#define CPU_ID_EXT_MODEL_MASK GENMASK(19, 16)
+#define CPU_ID_EXT_FAMILY_MASK GENMASK(27, 20)
+
+#define CORE_MAX_ON_HSX 18 /* Max number of cores on Haswell */
+#define CHAN_RANK_MAX_ON_HSX 8 /* Max number of channel ranks on Haswell */
+#define DIMM_IDX_MAX_ON_HSX 3 /* Max DIMM index per channel on Haswell */
+
+#define CORE_MAX_ON_BDX 24 /* Max number of cores on Broadwell */
+#define CHAN_RANK_MAX_ON_BDX 4 /* Max number of channel ranks on Broadwell */
+#define DIMM_IDX_MAX_ON_BDX 3 /* Max DIMM index per channel on Broadwell */
+
+#define CORE_MAX_ON_SKX 28 /* Max number of cores on Skylake */
+#define CHAN_RANK_MAX_ON_SKX 6 /* Max number of channel ranks on Skylake */
+#define DIMM_IDX_MAX_ON_SKX 2 /* Max DIMM index per channel on Skylake */
+
+#define CORE_NUMS_MAX CORE_MAX_ON_SKX
+#define CHAN_RANK_MAX CHAN_RANK_MAX_ON_HSX
+#define DIMM_IDX_MAX DIMM_IDX_MAX_ON_HSX
+#define DIMM_NUMS_MAX (CHAN_RANK_MAX * DIMM_IDX_MAX)
+
+#define TEMP_TYPE_PECI 6 /* Sensor type 6: Intel PECI */
+
+#define UPDATE_INTERVAL HZ
+
+struct temp_data {
+ uint valid;
+ s32 value;
+ ulong last_updated;
+};
+
+struct cpu_gen_info {
+ u16 family;
+ u8 model;
+ uint core_max;
+ uint chan_rank_max;
+ uint dimm_idx_max;
+};
+
+struct peci_mfd {
+ struct peci_client *client;
+ struct device *dev;
+ struct peci_adapter *adapter;
+ char name[PECI_NAME_SIZE];
+ u8 addr;
+ uint cpu_no;
+ const struct cpu_gen_info *gen_info;
+};
+
+bool peci_temp_need_update(struct temp_data *temp);
+void peci_temp_mark_updated(struct temp_data *temp);
+int peci_client_command(struct peci_mfd *mfd, enum peci_cmd cmd, void *vmsg);
+int peci_client_rd_pkg_cfg_cmd(struct peci_mfd *mfd, u8 mbx_idx,
+ u16 param, u8 *data);
+
+#endif /* __LINUX_MFD_PECI_CLIENT_H */
--
2.18.0
^ permalink raw reply related
* [PATCH v7 08/12] mfd: intel-peci-client: Add PECI client MFD driver
From: Jae Hyun Yoo @ 2018-07-23 21:47 UTC (permalink / raw)
To: Jean Delvare, Guenter Roeck, Rob Herring, Mark Rutland, Lee Jones,
Joel Stanley, Andrew Jeffery, Jonathan Corbet, Greg Kroah-Hartman,
Gustavo Pimentel, Kishon Vijay Abraham I, Lorenzo Pieralisi,
Darrick J . Wong, Eric Sandeen, Arnd Bergmann, Wu Hao,
Tomohiro Kusumi, Bryant G . Ly, Frederic Barrat, David S . Miller,
Mauro Carvalho Chehab, Andrew Morton, Randy Dunlap,
Philippe Ombredanne, Vinod Koul, Stephen Boyd, David Kershner,
Uwe Kleine-Konig, Sagar Dharia, Johan Hovold, Thomas Gleixner,
Juergen Gross, Cyrille Pitchen
Cc: linux-hwmon, devicetree, linux-kernel, linux-arm-kernel,
linux-aspeed, linux-doc, openbmc, Jae Hyun Yoo, James Feist,
Jason M Biils, Vernon Mauery
In-Reply-To: <20180723214751.1733-1-jae.hyun.yoo@linux.intel.com>
This commit adds PECI client MFD driver.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: James Feist <james.feist@linux.intel.com>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Vernon Mauery <vernon.mauery@linux.intel.com>
---
drivers/mfd/Kconfig | 14 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/intel-peci-client.c | 182 ++++++++++++++++++++++++++
include/linux/mfd/intel-peci-client.h | 81 ++++++++++++
4 files changed, 278 insertions(+)
create mode 100644 drivers/mfd/intel-peci-client.c
create mode 100644 include/linux/mfd/intel-peci-client.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index f3fa516011ec..e38b591479d4 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -595,6 +595,20 @@ config MFD_INTEL_MSIC
Passage) chip. This chip embeds audio, battery, GPIO, etc.
devices used in Intel Medfield platforms.
+config MFD_INTEL_PECI_CLIENT
+ bool "Intel PECI client"
+ depends on (PECI || COMPILE_TEST)
+ select MFD_CORE
+ help
+ If you say yes to this option, support will be included for the
+ multi-funtional Intel PECI (Platform Environment Control Interface)
+ client. PECI is a one-wire bus interface that provides a communication
+ channel from PECI clients in Intel processors and chipset components
+ to external monitoring or control devices.
+
+ Additional drivers must be enabled in order to use the functionality
+ of the device.
+
config MFD_IPAQ_MICRO
bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support"
depends on SA1100_H3100 || SA1100_H3600
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 2852a6042ecf..29e2cacc58bd 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -203,6 +203,7 @@ obj-$(CONFIG_MFD_INTEL_LPSS) += intel-lpss.o
obj-$(CONFIG_MFD_INTEL_LPSS_PCI) += intel-lpss-pci.o
obj-$(CONFIG_MFD_INTEL_LPSS_ACPI) += intel-lpss-acpi.o
obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
+obj-$(CONFIG_MFD_INTEL_PECI_CLIENT) += intel-peci-client.o
obj-$(CONFIG_MFD_PALMAS) += palmas.o
obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o
obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
diff --git a/drivers/mfd/intel-peci-client.c b/drivers/mfd/intel-peci-client.c
new file mode 100644
index 000000000000..d7702cf1ea50
--- /dev/null
+++ b/drivers/mfd/intel-peci-client.c
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Intel Corporation
+
+#include <linux/bitfield.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/intel-peci-client.h>
+#include <linux/module.h>
+#include <linux/peci.h>
+#include <linux/of_device.h>
+
+enum cpu_gens {
+ CPU_GEN_HSX = 0, /* Haswell Xeon */
+ CPU_GEN_BRX, /* Broadwell Xeon */
+ CPU_GEN_SKX, /* Skylake Xeon */
+};
+
+static struct mfd_cell peci_functions[] = {
+ {
+ .name = "peci-cputemp",
+ .of_compatible = "intel,peci-cputemp",
+ },
+ {
+ .name = "peci-dimmtemp",
+ .of_compatible = "intel,peci-dimmtemp",
+ },
+};
+
+static const struct cpu_gen_info cpu_gen_info_table[] = {
+ [CPU_GEN_HSX] = {
+ .family = 6, /* Family code */
+ .model = INTEL_FAM6_HASWELL_X,
+ .core_max = CORE_MAX_ON_HSX,
+ .chan_rank_max = CHAN_RANK_MAX_ON_HSX,
+ .dimm_idx_max = DIMM_IDX_MAX_ON_HSX },
+ [CPU_GEN_BRX] = {
+ .family = 6, /* Family code */
+ .model = INTEL_FAM6_BROADWELL_X,
+ .core_max = CORE_MAX_ON_BDX,
+ .chan_rank_max = CHAN_RANK_MAX_ON_BDX,
+ .dimm_idx_max = DIMM_IDX_MAX_ON_BDX },
+ [CPU_GEN_SKX] = {
+ .family = 6, /* Family code */
+ .model = INTEL_FAM6_SKYLAKE_X,
+ .core_max = CORE_MAX_ON_SKX,
+ .chan_rank_max = CHAN_RANK_MAX_ON_SKX,
+ .dimm_idx_max = DIMM_IDX_MAX_ON_SKX },
+};
+
+static int peci_client_get_cpu_gen_info(struct peci_mfd *priv)
+{
+ u32 cpu_id;
+ int i, rc;
+
+ rc = peci_get_cpu_id(priv->adapter, priv->addr, &cpu_id);
+ if (rc)
+ return rc;
+
+ for (i = 0; i < ARRAY_SIZE(cpu_gen_info_table); i++) {
+ if (FIELD_GET(CPU_ID_FAMILY_MASK, cpu_id) +
+ FIELD_GET(CPU_ID_EXT_FAMILY_MASK, cpu_id) ==
+ cpu_gen_info_table[i].family &&
+ FIELD_GET(CPU_ID_MODEL_MASK, cpu_id) ==
+ FIELD_GET(LOWER_NIBBLE_MASK,
+ cpu_gen_info_table[i].model) &&
+ FIELD_GET(CPU_ID_EXT_MODEL_MASK, cpu_id) ==
+ FIELD_GET(UPPER_NIBBLE_MASK,
+ cpu_gen_info_table[i].model)) {
+ break;
+ }
+ }
+
+ if (i >= ARRAY_SIZE(cpu_gen_info_table))
+ return -ENODEV;
+
+ priv->gen_info = &cpu_gen_info_table[i];
+
+ return 0;
+}
+
+bool peci_temp_need_update(struct temp_data *temp)
+{
+ if (temp->valid &&
+ time_before(jiffies, temp->last_updated + UPDATE_INTERVAL))
+ return false;
+
+ return true;
+}
+EXPORT_SYMBOL_GPL(peci_temp_need_update);
+
+void peci_temp_mark_updated(struct temp_data *temp)
+{
+ temp->valid = 1;
+ temp->last_updated = jiffies;
+}
+EXPORT_SYMBOL_GPL(peci_temp_mark_updated);
+
+int peci_client_command(struct peci_mfd *priv, enum peci_cmd cmd, void *vmsg)
+{
+ return peci_command(priv->adapter, cmd, vmsg);
+}
+EXPORT_SYMBOL_GPL(peci_client_command);
+
+int peci_client_rd_pkg_cfg_cmd(struct peci_mfd *priv, u8 mbx_idx,
+ u16 param, u8 *data)
+{
+ struct peci_rd_pkg_cfg_msg msg;
+ int rc;
+
+ msg.addr = priv->addr;
+ msg.index = mbx_idx;
+ msg.param = param;
+ msg.rx_len = 4;
+
+ rc = peci_command(priv->adapter, PECI_CMD_RD_PKG_CFG, &msg);
+ if (!rc)
+ memcpy(data, msg.pkg_config, 4);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(peci_client_rd_pkg_cfg_cmd);
+
+static int peci_client_probe(struct peci_client *client)
+{
+ struct device *dev = &client->dev;
+ struct peci_mfd *priv;
+ int rc;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, priv);
+ priv->client = client;
+ priv->dev = dev;
+ priv->adapter = client->adapter;
+ priv->addr = client->addr;
+ priv->cpu_no = client->addr - PECI_BASE_ADDR;
+
+ snprintf(priv->name, PECI_NAME_SIZE, "peci_client.cpu%d", priv->cpu_no);
+
+ rc = peci_client_get_cpu_gen_info(priv);
+ if (rc)
+ return rc;
+
+ rc = devm_mfd_add_devices(priv->dev, priv->cpu_no, peci_functions,
+ ARRAY_SIZE(peci_functions), NULL, 0, NULL);
+ if (rc < 0) {
+ dev_err(priv->dev, "devm_mfd_add_devices failed: %d\n", rc);
+ return rc;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id peci_client_of_table[] = {
+ { .compatible = "intel,peci-client" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, peci_client_of_table);
+#endif
+
+static const struct peci_device_id peci_client_ids[] = {
+ { .name = "peci-client", .driver_data = 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(peci, peci_client_ids);
+
+static struct peci_driver peci_client_driver = {
+ .probe = peci_client_probe,
+ .id_table = peci_client_ids,
+ .driver = {
+ .name = "peci-client",
+ .of_match_table =
+ of_match_ptr(peci_client_of_table),
+ },
+};
+module_peci_driver(peci_client_driver);
+
+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");
+MODULE_DESCRIPTION("PECI client MFD driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/intel-peci-client.h b/include/linux/mfd/intel-peci-client.h
new file mode 100644
index 000000000000..7ec272cddceb
--- /dev/null
+++ b/include/linux/mfd/intel-peci-client.h
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2018 Intel Corporation */
+
+#ifndef __LINUX_MFD_PECI_CLIENT_H
+#define __LINUX_MFD_PECI_CLIENT_H
+
+#include <linux/peci.h>
+
+#if IS_ENABLED(CONFIG_X86)
+#include <asm/intel-family.h>
+#else
+/**
+ * Architectures other than x86 cannot include the header file so define these
+ * at here. These are needed for detecting type of client x86 CPUs behind a PECI
+ * connection.
+ */
+#define INTEL_FAM6_HASWELL_X 0x3F
+#define INTEL_FAM6_BROADWELL_X 0x4F
+#define INTEL_FAM6_SKYLAKE_X 0x55
+#endif
+
+#define LOWER_NIBBLE_MASK GENMASK(3, 0)
+#define UPPER_NIBBLE_MASK GENMASK(7, 4)
+
+#define CPU_ID_MODEL_MASK GENMASK(7, 4)
+#define CPU_ID_FAMILY_MASK GENMASK(11, 8)
+#define CPU_ID_EXT_MODEL_MASK GENMASK(19, 16)
+#define CPU_ID_EXT_FAMILY_MASK GENMASK(27, 20)
+
+#define CORE_MAX_ON_HSX 18 /* Max number of cores on Haswell */
+#define CHAN_RANK_MAX_ON_HSX 8 /* Max number of channel ranks on Haswell */
+#define DIMM_IDX_MAX_ON_HSX 3 /* Max DIMM index per channel on Haswell */
+
+#define CORE_MAX_ON_BDX 24 /* Max number of cores on Broadwell */
+#define CHAN_RANK_MAX_ON_BDX 4 /* Max number of channel ranks on Broadwell */
+#define DIMM_IDX_MAX_ON_BDX 3 /* Max DIMM index per channel on Broadwell */
+
+#define CORE_MAX_ON_SKX 28 /* Max number of cores on Skylake */
+#define CHAN_RANK_MAX_ON_SKX 6 /* Max number of channel ranks on Skylake */
+#define DIMM_IDX_MAX_ON_SKX 2 /* Max DIMM index per channel on Skylake */
+
+#define CORE_NUMS_MAX CORE_MAX_ON_SKX
+#define CHAN_RANK_MAX CHAN_RANK_MAX_ON_HSX
+#define DIMM_IDX_MAX DIMM_IDX_MAX_ON_HSX
+#define DIMM_NUMS_MAX (CHAN_RANK_MAX * DIMM_IDX_MAX)
+
+#define TEMP_TYPE_PECI 6 /* Sensor type 6: Intel PECI */
+
+#define UPDATE_INTERVAL HZ
+
+struct temp_data {
+ uint valid;
+ s32 value;
+ ulong last_updated;
+};
+
+struct cpu_gen_info {
+ u16 family;
+ u8 model;
+ uint core_max;
+ uint chan_rank_max;
+ uint dimm_idx_max;
+};
+
+struct peci_mfd {
+ struct peci_client *client;
+ struct device *dev;
+ struct peci_adapter *adapter;
+ char name[PECI_NAME_SIZE];
+ u8 addr;
+ uint cpu_no;
+ const struct cpu_gen_info *gen_info;
+};
+
+bool peci_temp_need_update(struct temp_data *temp);
+void peci_temp_mark_updated(struct temp_data *temp);
+int peci_client_command(struct peci_mfd *mfd, enum peci_cmd cmd, void *vmsg);
+int peci_client_rd_pkg_cfg_cmd(struct peci_mfd *mfd, u8 mbx_idx,
+ u16 param, u8 *data);
+
+#endif /* __LINUX_MFD_PECI_CLIENT_H */
--
2.18.0
^ permalink raw reply related
* [PATCH v7 08/12] mfd: intel-peci-client: Add PECI client MFD driver
From: Jae Hyun Yoo @ 2018-07-23 21:47 UTC (permalink / raw)
To: linux-aspeed
In-Reply-To: <20180723214751.1733-1-jae.hyun.yoo@linux.intel.com>
This commit adds PECI client MFD driver.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: James Feist <james.feist@linux.intel.com>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Vernon Mauery <vernon.mauery@linux.intel.com>
---
drivers/mfd/Kconfig | 14 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/intel-peci-client.c | 182 ++++++++++++++++++++++++++
include/linux/mfd/intel-peci-client.h | 81 ++++++++++++
4 files changed, 278 insertions(+)
create mode 100644 drivers/mfd/intel-peci-client.c
create mode 100644 include/linux/mfd/intel-peci-client.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index f3fa516011ec..e38b591479d4 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -595,6 +595,20 @@ config MFD_INTEL_MSIC
Passage) chip. This chip embeds audio, battery, GPIO, etc.
devices used in Intel Medfield platforms.
+config MFD_INTEL_PECI_CLIENT
+ bool "Intel PECI client"
+ depends on (PECI || COMPILE_TEST)
+ select MFD_CORE
+ help
+ If you say yes to this option, support will be included for the
+ multi-funtional Intel PECI (Platform Environment Control Interface)
+ client. PECI is a one-wire bus interface that provides a communication
+ channel from PECI clients in Intel processors and chipset components
+ to external monitoring or control devices.
+
+ Additional drivers must be enabled in order to use the functionality
+ of the device.
+
config MFD_IPAQ_MICRO
bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support"
depends on SA1100_H3100 || SA1100_H3600
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 2852a6042ecf..29e2cacc58bd 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -203,6 +203,7 @@ obj-$(CONFIG_MFD_INTEL_LPSS) += intel-lpss.o
obj-$(CONFIG_MFD_INTEL_LPSS_PCI) += intel-lpss-pci.o
obj-$(CONFIG_MFD_INTEL_LPSS_ACPI) += intel-lpss-acpi.o
obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
+obj-$(CONFIG_MFD_INTEL_PECI_CLIENT) += intel-peci-client.o
obj-$(CONFIG_MFD_PALMAS) += palmas.o
obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o
obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
diff --git a/drivers/mfd/intel-peci-client.c b/drivers/mfd/intel-peci-client.c
new file mode 100644
index 000000000000..d7702cf1ea50
--- /dev/null
+++ b/drivers/mfd/intel-peci-client.c
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Intel Corporation
+
+#include <linux/bitfield.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/intel-peci-client.h>
+#include <linux/module.h>
+#include <linux/peci.h>
+#include <linux/of_device.h>
+
+enum cpu_gens {
+ CPU_GEN_HSX = 0, /* Haswell Xeon */
+ CPU_GEN_BRX, /* Broadwell Xeon */
+ CPU_GEN_SKX, /* Skylake Xeon */
+};
+
+static struct mfd_cell peci_functions[] = {
+ {
+ .name = "peci-cputemp",
+ .of_compatible = "intel,peci-cputemp",
+ },
+ {
+ .name = "peci-dimmtemp",
+ .of_compatible = "intel,peci-dimmtemp",
+ },
+};
+
+static const struct cpu_gen_info cpu_gen_info_table[] = {
+ [CPU_GEN_HSX] = {
+ .family = 6, /* Family code */
+ .model = INTEL_FAM6_HASWELL_X,
+ .core_max = CORE_MAX_ON_HSX,
+ .chan_rank_max = CHAN_RANK_MAX_ON_HSX,
+ .dimm_idx_max = DIMM_IDX_MAX_ON_HSX },
+ [CPU_GEN_BRX] = {
+ .family = 6, /* Family code */
+ .model = INTEL_FAM6_BROADWELL_X,
+ .core_max = CORE_MAX_ON_BDX,
+ .chan_rank_max = CHAN_RANK_MAX_ON_BDX,
+ .dimm_idx_max = DIMM_IDX_MAX_ON_BDX },
+ [CPU_GEN_SKX] = {
+ .family = 6, /* Family code */
+ .model = INTEL_FAM6_SKYLAKE_X,
+ .core_max = CORE_MAX_ON_SKX,
+ .chan_rank_max = CHAN_RANK_MAX_ON_SKX,
+ .dimm_idx_max = DIMM_IDX_MAX_ON_SKX },
+};
+
+static int peci_client_get_cpu_gen_info(struct peci_mfd *priv)
+{
+ u32 cpu_id;
+ int i, rc;
+
+ rc = peci_get_cpu_id(priv->adapter, priv->addr, &cpu_id);
+ if (rc)
+ return rc;
+
+ for (i = 0; i < ARRAY_SIZE(cpu_gen_info_table); i++) {
+ if (FIELD_GET(CPU_ID_FAMILY_MASK, cpu_id) +
+ FIELD_GET(CPU_ID_EXT_FAMILY_MASK, cpu_id) ==
+ cpu_gen_info_table[i].family &&
+ FIELD_GET(CPU_ID_MODEL_MASK, cpu_id) ==
+ FIELD_GET(LOWER_NIBBLE_MASK,
+ cpu_gen_info_table[i].model) &&
+ FIELD_GET(CPU_ID_EXT_MODEL_MASK, cpu_id) ==
+ FIELD_GET(UPPER_NIBBLE_MASK,
+ cpu_gen_info_table[i].model)) {
+ break;
+ }
+ }
+
+ if (i >= ARRAY_SIZE(cpu_gen_info_table))
+ return -ENODEV;
+
+ priv->gen_info = &cpu_gen_info_table[i];
+
+ return 0;
+}
+
+bool peci_temp_need_update(struct temp_data *temp)
+{
+ if (temp->valid &&
+ time_before(jiffies, temp->last_updated + UPDATE_INTERVAL))
+ return false;
+
+ return true;
+}
+EXPORT_SYMBOL_GPL(peci_temp_need_update);
+
+void peci_temp_mark_updated(struct temp_data *temp)
+{
+ temp->valid = 1;
+ temp->last_updated = jiffies;
+}
+EXPORT_SYMBOL_GPL(peci_temp_mark_updated);
+
+int peci_client_command(struct peci_mfd *priv, enum peci_cmd cmd, void *vmsg)
+{
+ return peci_command(priv->adapter, cmd, vmsg);
+}
+EXPORT_SYMBOL_GPL(peci_client_command);
+
+int peci_client_rd_pkg_cfg_cmd(struct peci_mfd *priv, u8 mbx_idx,
+ u16 param, u8 *data)
+{
+ struct peci_rd_pkg_cfg_msg msg;
+ int rc;
+
+ msg.addr = priv->addr;
+ msg.index = mbx_idx;
+ msg.param = param;
+ msg.rx_len = 4;
+
+ rc = peci_command(priv->adapter, PECI_CMD_RD_PKG_CFG, &msg);
+ if (!rc)
+ memcpy(data, msg.pkg_config, 4);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(peci_client_rd_pkg_cfg_cmd);
+
+static int peci_client_probe(struct peci_client *client)
+{
+ struct device *dev = &client->dev;
+ struct peci_mfd *priv;
+ int rc;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, priv);
+ priv->client = client;
+ priv->dev = dev;
+ priv->adapter = client->adapter;
+ priv->addr = client->addr;
+ priv->cpu_no = client->addr - PECI_BASE_ADDR;
+
+ snprintf(priv->name, PECI_NAME_SIZE, "peci_client.cpu%d", priv->cpu_no);
+
+ rc = peci_client_get_cpu_gen_info(priv);
+ if (rc)
+ return rc;
+
+ rc = devm_mfd_add_devices(priv->dev, priv->cpu_no, peci_functions,
+ ARRAY_SIZE(peci_functions), NULL, 0, NULL);
+ if (rc < 0) {
+ dev_err(priv->dev, "devm_mfd_add_devices failed: %d\n", rc);
+ return rc;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id peci_client_of_table[] = {
+ { .compatible = "intel,peci-client" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, peci_client_of_table);
+#endif
+
+static const struct peci_device_id peci_client_ids[] = {
+ { .name = "peci-client", .driver_data = 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(peci, peci_client_ids);
+
+static struct peci_driver peci_client_driver = {
+ .probe = peci_client_probe,
+ .id_table = peci_client_ids,
+ .driver = {
+ .name = "peci-client",
+ .of_match_table =
+ of_match_ptr(peci_client_of_table),
+ },
+};
+module_peci_driver(peci_client_driver);
+
+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");
+MODULE_DESCRIPTION("PECI client MFD driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/intel-peci-client.h b/include/linux/mfd/intel-peci-client.h
new file mode 100644
index 000000000000..7ec272cddceb
--- /dev/null
+++ b/include/linux/mfd/intel-peci-client.h
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2018 Intel Corporation */
+
+#ifndef __LINUX_MFD_PECI_CLIENT_H
+#define __LINUX_MFD_PECI_CLIENT_H
+
+#include <linux/peci.h>
+
+#if IS_ENABLED(CONFIG_X86)
+#include <asm/intel-family.h>
+#else
+/**
+ * Architectures other than x86 cannot include the header file so define these
+ * at here. These are needed for detecting type of client x86 CPUs behind a PECI
+ * connection.
+ */
+#define INTEL_FAM6_HASWELL_X 0x3F
+#define INTEL_FAM6_BROADWELL_X 0x4F
+#define INTEL_FAM6_SKYLAKE_X 0x55
+#endif
+
+#define LOWER_NIBBLE_MASK GENMASK(3, 0)
+#define UPPER_NIBBLE_MASK GENMASK(7, 4)
+
+#define CPU_ID_MODEL_MASK GENMASK(7, 4)
+#define CPU_ID_FAMILY_MASK GENMASK(11, 8)
+#define CPU_ID_EXT_MODEL_MASK GENMASK(19, 16)
+#define CPU_ID_EXT_FAMILY_MASK GENMASK(27, 20)
+
+#define CORE_MAX_ON_HSX 18 /* Max number of cores on Haswell */
+#define CHAN_RANK_MAX_ON_HSX 8 /* Max number of channel ranks on Haswell */
+#define DIMM_IDX_MAX_ON_HSX 3 /* Max DIMM index per channel on Haswell */
+
+#define CORE_MAX_ON_BDX 24 /* Max number of cores on Broadwell */
+#define CHAN_RANK_MAX_ON_BDX 4 /* Max number of channel ranks on Broadwell */
+#define DIMM_IDX_MAX_ON_BDX 3 /* Max DIMM index per channel on Broadwell */
+
+#define CORE_MAX_ON_SKX 28 /* Max number of cores on Skylake */
+#define CHAN_RANK_MAX_ON_SKX 6 /* Max number of channel ranks on Skylake */
+#define DIMM_IDX_MAX_ON_SKX 2 /* Max DIMM index per channel on Skylake */
+
+#define CORE_NUMS_MAX CORE_MAX_ON_SKX
+#define CHAN_RANK_MAX CHAN_RANK_MAX_ON_HSX
+#define DIMM_IDX_MAX DIMM_IDX_MAX_ON_HSX
+#define DIMM_NUMS_MAX (CHAN_RANK_MAX * DIMM_IDX_MAX)
+
+#define TEMP_TYPE_PECI 6 /* Sensor type 6: Intel PECI */
+
+#define UPDATE_INTERVAL HZ
+
+struct temp_data {
+ uint valid;
+ s32 value;
+ ulong last_updated;
+};
+
+struct cpu_gen_info {
+ u16 family;
+ u8 model;
+ uint core_max;
+ uint chan_rank_max;
+ uint dimm_idx_max;
+};
+
+struct peci_mfd {
+ struct peci_client *client;
+ struct device *dev;
+ struct peci_adapter *adapter;
+ char name[PECI_NAME_SIZE];
+ u8 addr;
+ uint cpu_no;
+ const struct cpu_gen_info *gen_info;
+};
+
+bool peci_temp_need_update(struct temp_data *temp);
+void peci_temp_mark_updated(struct temp_data *temp);
+int peci_client_command(struct peci_mfd *mfd, enum peci_cmd cmd, void *vmsg);
+int peci_client_rd_pkg_cfg_cmd(struct peci_mfd *mfd, u8 mbx_idx,
+ u16 param, u8 *data);
+
+#endif /* __LINUX_MFD_PECI_CLIENT_H */
--
2.18.0
^ permalink raw reply related
* [PATCH v7 07/12] dt-bindings: mfd: Add a document for PECI client MFD
From: Jae Hyun Yoo @ 2018-07-23 21:47 UTC (permalink / raw)
To: Jean Delvare, Guenter Roeck, Rob Herring, Mark Rutland, Lee Jones,
Joel Stanley, Andrew Jeffery, Jonathan Corbet, Greg Kroah-Hartman,
Gustavo Pimentel, Kishon Vijay Abraham I, Lorenzo Pieralisi,
Darrick J . Wong, Eric Sandeen, Arnd Bergmann, Wu Hao,
Tomohiro Kusumi, Bryant G . Ly, Frederic Barrat, David
Cc: linux-hwmon, devicetree, linux-kernel, linux-arm-kernel,
linux-aspeed, linux-doc, openbmc, Jae Hyun Yoo, James Feist,
Jason M Biils, Vernon Mauery
In-Reply-To: <20180723214751.1733-1-jae.hyun.yoo@linux.intel.com>
This commit adds a dt-bindings document for PECI client MFD.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: James Feist <james.feist@linux.intel.com>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Vernon Mauery <vernon.mauery@linux.intel.com>
---
.../bindings/mfd/intel-peci-client.txt | 34 +++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/intel-peci-client.txt
diff --git a/Documentation/devicetree/bindings/mfd/intel-peci-client.txt b/Documentation/devicetree/bindings/mfd/intel-peci-client.txt
new file mode 100644
index 000000000000..cb341e363add
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/intel-peci-client.txt
@@ -0,0 +1,34 @@
+* Intel PECI client bindings
+
+PECI (Platform Environment Control Interface) is a one-wire bus interface that
+provides a communication channel from PECI clients in Intel processors and
+chipset components to external monitoring or control devices. PECI is designed
+to support the following sideband functions:
+
+- Processor and DRAM thermal management
+- Platform Manageability
+- Processor Interface Tuning and Diagnostics
+- Failure Analysis
+
+Required properties:
+- compatible : Should be "intel,peci-client".
+- reg : Should contain address of a client CPU. Address range of CPU
+ clients starts from 0x30 based on PECI specification.
+
+Example:
+ peci-bus@0 {
+ compatible = "vendor,soc-peci";
+ reg = <0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ peci-client@30 {
+ compatible = "intel,peci-client";
+ reg = <0x30>;
+ };
+
+ peci-client@31 {
+ compatible = "intel,peci-client";
+ reg = <0x31>;
+ };
+ };
--
2.18.0
^ permalink raw reply related
* [PATCH v7 07/12] dt-bindings: mfd: Add a document for PECI client MFD
From: Jae Hyun Yoo @ 2018-07-23 21:47 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180723214751.1733-1-jae.hyun.yoo@linux.intel.com>
This commit adds a dt-bindings document for PECI client MFD.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: James Feist <james.feist@linux.intel.com>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Vernon Mauery <vernon.mauery@linux.intel.com>
---
.../bindings/mfd/intel-peci-client.txt | 34 +++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/intel-peci-client.txt
diff --git a/Documentation/devicetree/bindings/mfd/intel-peci-client.txt b/Documentation/devicetree/bindings/mfd/intel-peci-client.txt
new file mode 100644
index 000000000000..cb341e363add
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/intel-peci-client.txt
@@ -0,0 +1,34 @@
+* Intel PECI client bindings
+
+PECI (Platform Environment Control Interface) is a one-wire bus interface that
+provides a communication channel from PECI clients in Intel processors and
+chipset components to external monitoring or control devices. PECI is designed
+to support the following sideband functions:
+
+- Processor and DRAM thermal management
+- Platform Manageability
+- Processor Interface Tuning and Diagnostics
+- Failure Analysis
+
+Required properties:
+- compatible : Should be "intel,peci-client".
+- reg : Should contain address of a client CPU. Address range of CPU
+ clients starts from 0x30 based on PECI specification.
+
+Example:
+ peci-bus at 0 {
+ compatible = "vendor,soc-peci";
+ reg = <0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ peci-client at 30 {
+ compatible = "intel,peci-client";
+ reg = <0x30>;
+ };
+
+ peci-client at 31 {
+ compatible = "intel,peci-client";
+ reg = <0x31>;
+ };
+ };
--
2.18.0
^ permalink raw reply related
* [PATCH v7 07/12] dt-bindings: mfd: Add a document for PECI client MFD
From: Jae Hyun Yoo @ 2018-07-23 21:47 UTC (permalink / raw)
To: Jean Delvare, Guenter Roeck, Rob Herring, Mark Rutland, Lee Jones,
Joel Stanley, Andrew Jeffery, Jonathan Corbet, Greg Kroah-Hartman,
Gustavo Pimentel, Kishon Vijay Abraham I, Lorenzo Pieralisi,
Darrick J . Wong, Eric Sandeen, Arnd Bergmann, Wu Hao,
Tomohiro Kusumi, Bryant G . Ly, Frederic Barrat, David S . Miller,
Mauro Carvalho Chehab, Andrew Morton, Randy Dunlap,
Philippe Ombredanne, Vinod Koul, Stephen Boyd, David Kershner,
Uwe Kleine-Konig, Sagar Dharia, Johan Hovold, Thomas Gleixner,
Juergen Gross, Cyrille Pitchen
Cc: linux-hwmon, devicetree, linux-kernel, linux-arm-kernel,
linux-aspeed, linux-doc, openbmc, Jae Hyun Yoo, James Feist,
Jason M Biils, Vernon Mauery
In-Reply-To: <20180723214751.1733-1-jae.hyun.yoo@linux.intel.com>
This commit adds a dt-bindings document for PECI client MFD.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: James Feist <james.feist@linux.intel.com>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Vernon Mauery <vernon.mauery@linux.intel.com>
---
.../bindings/mfd/intel-peci-client.txt | 34 +++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/intel-peci-client.txt
diff --git a/Documentation/devicetree/bindings/mfd/intel-peci-client.txt b/Documentation/devicetree/bindings/mfd/intel-peci-client.txt
new file mode 100644
index 000000000000..cb341e363add
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/intel-peci-client.txt
@@ -0,0 +1,34 @@
+* Intel PECI client bindings
+
+PECI (Platform Environment Control Interface) is a one-wire bus interface that
+provides a communication channel from PECI clients in Intel processors and
+chipset components to external monitoring or control devices. PECI is designed
+to support the following sideband functions:
+
+- Processor and DRAM thermal management
+- Platform Manageability
+- Processor Interface Tuning and Diagnostics
+- Failure Analysis
+
+Required properties:
+- compatible : Should be "intel,peci-client".
+- reg : Should contain address of a client CPU. Address range of CPU
+ clients starts from 0x30 based on PECI specification.
+
+Example:
+ peci-bus@0 {
+ compatible = "vendor,soc-peci";
+ reg = <0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ peci-client@30 {
+ compatible = "intel,peci-client";
+ reg = <0x30>;
+ };
+
+ peci-client@31 {
+ compatible = "intel,peci-client";
+ reg = <0x31>;
+ };
+ };
--
2.18.0
^ permalink raw reply related
* [PATCH v7 07/12] dt-bindings: mfd: Add a document for PECI client MFD
From: Jae Hyun Yoo @ 2018-07-23 21:47 UTC (permalink / raw)
To: linux-aspeed
In-Reply-To: <20180723214751.1733-1-jae.hyun.yoo@linux.intel.com>
This commit adds a dt-bindings document for PECI client MFD.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: James Feist <james.feist@linux.intel.com>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Vernon Mauery <vernon.mauery@linux.intel.com>
---
.../bindings/mfd/intel-peci-client.txt | 34 +++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/intel-peci-client.txt
diff --git a/Documentation/devicetree/bindings/mfd/intel-peci-client.txt b/Documentation/devicetree/bindings/mfd/intel-peci-client.txt
new file mode 100644
index 000000000000..cb341e363add
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/intel-peci-client.txt
@@ -0,0 +1,34 @@
+* Intel PECI client bindings
+
+PECI (Platform Environment Control Interface) is a one-wire bus interface that
+provides a communication channel from PECI clients in Intel processors and
+chipset components to external monitoring or control devices. PECI is designed
+to support the following sideband functions:
+
+- Processor and DRAM thermal management
+- Platform Manageability
+- Processor Interface Tuning and Diagnostics
+- Failure Analysis
+
+Required properties:
+- compatible : Should be "intel,peci-client".
+- reg : Should contain address of a client CPU. Address range of CPU
+ clients starts from 0x30 based on PECI specification.
+
+Example:
+ peci-bus at 0 {
+ compatible = "vendor,soc-peci";
+ reg = <0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ peci-client at 30 {
+ compatible = "intel,peci-client";
+ reg = <0x30>;
+ };
+
+ peci-client at 31 {
+ compatible = "intel,peci-client";
+ reg = <0x31>;
+ };
+ };
--
2.18.0
^ permalink raw reply related
* [PATCH v7 06/12] peci: Add a PECI adapter driver for Aspeed AST24xx/AST25xx
From: Jae Hyun Yoo @ 2018-07-23 21:47 UTC (permalink / raw)
To: Jean Delvare, Guenter Roeck, Rob Herring, Mark Rutland, Lee Jones,
Joel Stanley, Andrew Jeffery, Jonathan Corbet, Greg Kroah-Hartman,
Gustavo Pimentel, Kishon Vijay Abraham I, Lorenzo Pieralisi,
Darrick J . Wong, Eric Sandeen, Arnd Bergmann, Wu Hao,
Tomohiro Kusumi, Bryant G . Ly, Frederic Barrat, David
Cc: linux-hwmon, devicetree, linux-kernel, linux-arm-kernel,
linux-aspeed, linux-doc, openbmc, Jae Hyun Yoo, Andy Shevchenko,
Robin Murphy, Ryan Chen
In-Reply-To: <20180723214751.1733-1-jae.hyun.yoo@linux.intel.com>
This commit adds PECI adapter driver implementation for Aspeed
AST24xx/AST25xx SoCs.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Reviewed-by: James Feist <james.feist@linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ryan Chen <ryan_chen@aspeedtech.com>
---
drivers/peci/Kconfig | 27 ++
drivers/peci/Makefile | 3 +
drivers/peci/peci-aspeed.c | 498 +++++++++++++++++++++++++++++++++++++
3 files changed, 528 insertions(+)
create mode 100644 drivers/peci/peci-aspeed.c
diff --git a/drivers/peci/Kconfig b/drivers/peci/Kconfig
index 4ccacb22a356..9e9845ebcff4 100644
--- a/drivers/peci/Kconfig
+++ b/drivers/peci/Kconfig
@@ -10,3 +10,30 @@ config PECI
The Platform Environment Control Interface (PECI) is a one-wire bus
interface that provides a communication channel from Intel processors
and chipset components to external monitoring or control devices.
+
+ If you want PECI support, you should say Y here and also to the
+ specific driver for your bus adapter(s) below.
+
+if PECI
+
+#
+# PECI hardware bus configuration
+#
+
+menu "PECI Hardware Bus support"
+
+config PECI_ASPEED
+ tristate "ASPEED PECI support"
+ select REGMAP_MMIO
+ depends on OF
+ depends on ARCH_ASPEED || COMPILE_TEST
+ help
+ Say Y here if you want support for the Platform Environment Control
+ Interface (PECI) bus adapter driver on the ASPEED SoCs.
+
+ This support is also available as a module. If so, the module
+ will be called peci-aspeed.
+
+endmenu
+
+endif # PECI
diff --git a/drivers/peci/Makefile b/drivers/peci/Makefile
index 9e8615e0d3ff..886285e69765 100644
--- a/drivers/peci/Makefile
+++ b/drivers/peci/Makefile
@@ -4,3 +4,6 @@
# Core functionality
obj-$(CONFIG_PECI) += peci-core.o
+
+# Hardware specific bus drivers
+obj-$(CONFIG_PECI_ASPEED) += peci-aspeed.o
diff --git a/drivers/peci/peci-aspeed.c b/drivers/peci/peci-aspeed.c
new file mode 100644
index 000000000000..8070ec18d484
--- /dev/null
+++ b/drivers/peci/peci-aspeed.c
@@ -0,0 +1,498 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2012-2017 ASPEED Technology Inc.
+// Copyright (c) 2018 Intel Corporation
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/peci.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+/* ASPEED PECI Registers */
+#define ASPEED_PECI_CTRL 0x00
+#define ASPEED_PECI_TIMING 0x04
+#define ASPEED_PECI_CMD 0x08
+#define ASPEED_PECI_CMD_CTRL 0x0c
+#define ASPEED_PECI_EXP_FCS 0x10
+#define ASPEED_PECI_CAP_FCS 0x14
+#define ASPEED_PECI_INT_CTRL 0x18
+#define ASPEED_PECI_INT_STS 0x1c
+#define ASPEED_PECI_W_DATA0 0x20
+#define ASPEED_PECI_W_DATA1 0x24
+#define ASPEED_PECI_W_DATA2 0x28
+#define ASPEED_PECI_W_DATA3 0x2c
+#define ASPEED_PECI_R_DATA0 0x30
+#define ASPEED_PECI_R_DATA1 0x34
+#define ASPEED_PECI_R_DATA2 0x38
+#define ASPEED_PECI_R_DATA3 0x3c
+#define ASPEED_PECI_W_DATA4 0x40
+#define ASPEED_PECI_W_DATA5 0x44
+#define ASPEED_PECI_W_DATA6 0x48
+#define ASPEED_PECI_W_DATA7 0x4c
+#define ASPEED_PECI_R_DATA4 0x50
+#define ASPEED_PECI_R_DATA5 0x54
+#define ASPEED_PECI_R_DATA6 0x58
+#define ASPEED_PECI_R_DATA7 0x5c
+
+/* ASPEED_PECI_CTRL - 0x00 : Control Register */
+#define PECI_CTRL_SAMPLING_MASK GENMASK(19, 16)
+#define PECI_CTRL_READ_MODE_MASK GENMASK(13, 12)
+#define PECI_CTRL_READ_MODE_COUNT BIT(12)
+#define PECI_CTRL_READ_MODE_DBG BIT(13)
+#define PECI_CTRL_CLK_SOURCE_MASK BIT(11)
+#define PECI_CTRL_CLK_DIV_MASK GENMASK(10, 8)
+#define PECI_CTRL_INVERT_OUT BIT(7)
+#define PECI_CTRL_INVERT_IN BIT(6)
+#define PECI_CTRL_BUS_CONTENT_EN BIT(5)
+#define PECI_CTRL_PECI_EN BIT(4)
+#define PECI_CTRL_PECI_CLK_EN BIT(0)
+
+/* ASPEED_PECI_TIMING - 0x04 : Timing Negotiation Register */
+#define PECI_TIMING_MESSAGE_MASK GENMASK(15, 8)
+#define PECI_TIMING_ADDRESS_MASK GENMASK(7, 0)
+
+/* ASPEED_PECI_CMD - 0x08 : Command Register */
+#define PECI_CMD_PIN_MON BIT(31)
+#define PECI_CMD_STS_MASK GENMASK(27, 24)
+#define PECI_CMD_IDLE_MASK (PECI_CMD_STS_MASK | PECI_CMD_PIN_MON)
+#define PECI_CMD_FIRE BIT(0)
+
+/* ASPEED_PECI_LEN - 0x0C : Read/Write Length Register */
+#define PECI_AW_FCS_EN BIT(31)
+#define PECI_READ_LEN_MASK GENMASK(23, 16)
+#define PECI_WRITE_LEN_MASK GENMASK(15, 8)
+#define PECI_TAGET_ADDR_MASK GENMASK(7, 0)
+
+/* ASPEED_PECI_EXP_FCS - 0x10 : Expected FCS Data Register */
+#define PECI_EXPECT_READ_FCS_MASK GENMASK(23, 16)
+#define PECI_EXPECT_AW_FCS_AUTO_MASK GENMASK(15, 8)
+#define PECI_EXPECT_WRITE_FCS_MASK GENMASK(7, 0)
+
+/* ASPEED_PECI_CAP_FCS - 0x14 : Captured FCS Data Register */
+#define PECI_CAPTURE_READ_FCS_MASK GENMASK(23, 16)
+#define PECI_CAPTURE_WRITE_FCS_MASK GENMASK(7, 0)
+
+/* ASPEED_PECI_INT_CTRL/STS - 0x18/0x1c : Interrupt Register */
+#define PECI_INT_TIMING_RESULT_MASK GENMASK(31, 30)
+#define PECI_INT_TIMEOUT BIT(4)
+#define PECI_INT_CONNECT BIT(3)
+#define PECI_INT_W_FCS_BAD BIT(2)
+#define PECI_INT_W_FCS_ABORT BIT(1)
+#define PECI_INT_CMD_DONE BIT(0)
+
+#define PECI_INT_MASK (PECI_INT_TIMEOUT | PECI_INT_CONNECT | \
+ PECI_INT_W_FCS_BAD | PECI_INT_W_FCS_ABORT | \
+ PECI_INT_CMD_DONE)
+
+#define PECI_IDLE_CHECK_TIMEOUT_USEC 50000
+#define PECI_IDLE_CHECK_INTERVAL_USEC 10000
+
+#define PECI_RD_SAMPLING_POINT_DEFAULT 8
+#define PECI_RD_SAMPLING_POINT_MAX 15
+#define PECI_CLK_DIV_DEFAULT 0
+#define PECI_CLK_DIV_MAX 7
+#define PECI_MSG_TIMING_DEFAULT 1
+#define PECI_MSG_TIMING_MAX 255
+#define PECI_ADDR_TIMING_DEFAULT 1
+#define PECI_ADDR_TIMING_MAX 255
+#define PECI_CMD_TIMEOUT_MS_DEFAULT 1000
+#define PECI_CMD_TIMEOUT_MS_MAX 60000
+
+struct aspeed_peci {
+ struct peci_adapter *adapter;
+ struct device *dev;
+ struct regmap *regmap;
+ struct reset_control *rst;
+ int irq;
+ spinlock_t lock; /* to sync completion status handling */
+ struct completion xfer_complete;
+ u32 status;
+ u32 cmd_timeout_ms;
+};
+
+static int aspeed_peci_xfer_native(struct aspeed_peci *priv,
+ struct peci_xfer_msg *msg)
+{
+ long err, timeout = msecs_to_jiffies(priv->cmd_timeout_ms);
+ u32 peci_head, peci_state, rx_data, cmd_sts;
+ unsigned long flags;
+ int i, rc;
+ uint reg;
+
+ /* Check command sts and bus idle state */
+ rc = regmap_read_poll_timeout(priv->regmap, ASPEED_PECI_CMD, cmd_sts,
+ !(cmd_sts & PECI_CMD_IDLE_MASK),
+ PECI_IDLE_CHECK_INTERVAL_USEC,
+ PECI_IDLE_CHECK_TIMEOUT_USEC);
+ if (rc)
+ return rc; /* -ETIMEDOUT */
+
+ spin_lock_irqsave(&priv->lock, flags);
+ reinit_completion(&priv->xfer_complete);
+
+ peci_head = FIELD_PREP(PECI_TAGET_ADDR_MASK, msg->addr) |
+ FIELD_PREP(PECI_WRITE_LEN_MASK, msg->tx_len) |
+ FIELD_PREP(PECI_READ_LEN_MASK, msg->rx_len);
+
+ regmap_write(priv->regmap, ASPEED_PECI_CMD_CTRL, peci_head);
+
+ for (i = 0; i < msg->tx_len; i += 4) {
+ reg = i < 16 ? ASPEED_PECI_W_DATA0 + i % 16 :
+ ASPEED_PECI_W_DATA4 + i % 16;
+ regmap_write(priv->regmap, reg,
+ le32_to_cpup((__le32 *)&msg->tx_buf[i]));
+ }
+
+ dev_dbg(priv->dev, "HEAD : 0x%08x\n", peci_head);
+ print_hex_dump_debug("TX : ", DUMP_PREFIX_NONE, 16, 1,
+ msg->tx_buf, msg->tx_len, true);
+
+ priv->status = 0;
+ regmap_write(priv->regmap, ASPEED_PECI_CMD, PECI_CMD_FIRE);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ err = wait_for_completion_interruptible_timeout(&priv->xfer_complete,
+ timeout);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ dev_dbg(priv->dev, "INT_STS : 0x%08x\n", priv->status);
+ regmap_read(priv->regmap, ASPEED_PECI_CMD, &peci_state);
+ dev_dbg(priv->dev, "PECI_STATE : 0x%lx\n",
+ FIELD_GET(PECI_CMD_STS_MASK, peci_state));
+
+ regmap_write(priv->regmap, ASPEED_PECI_CMD, 0);
+
+ if (err <= 0 || priv->status != PECI_INT_CMD_DONE) {
+ if (err < 0) { /* -ERESTARTSYS */
+ rc = (int)err;
+ goto err_irqrestore;
+ } else if (err == 0) {
+ dev_dbg(priv->dev, "Timeout waiting for a response!\n");
+ rc = -ETIMEDOUT;
+ goto err_irqrestore;
+ }
+
+ dev_dbg(priv->dev, "No valid response!\n");
+ rc = -EIO;
+ goto err_irqrestore;
+ }
+
+ /**
+ * Note that rx_len and rx_buf size can be an odd number.
+ * Byte handling is more efficient.
+ */
+ for (i = 0; i < msg->rx_len; i++) {
+ u8 byte_offset = i % 4;
+
+ if (byte_offset == 0) {
+ reg = i < 16 ? ASPEED_PECI_R_DATA0 + i % 16 :
+ ASPEED_PECI_R_DATA4 + i % 16;
+ regmap_read(priv->regmap, reg, &rx_data);
+ }
+
+ msg->rx_buf[i] = (u8)(rx_data >> (byte_offset << 3));
+ }
+
+ print_hex_dump_debug("RX : ", DUMP_PREFIX_NONE, 16, 1,
+ msg->rx_buf, msg->rx_len, true);
+
+ regmap_read(priv->regmap, ASPEED_PECI_CMD, &peci_state);
+ dev_dbg(priv->dev, "PECI_STATE : 0x%lx\n",
+ FIELD_GET(PECI_CMD_STS_MASK, peci_state));
+ dev_dbg(priv->dev, "------------------------\n");
+
+err_irqrestore:
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return rc;
+}
+
+static irqreturn_t aspeed_peci_irq_handler(int irq, void *arg)
+{
+ struct aspeed_peci *priv = arg;
+ u32 status_ack = 0;
+ u32 status;
+
+ spin_lock(&priv->lock);
+ regmap_read(priv->regmap, ASPEED_PECI_INT_STS, &status);
+ priv->status |= (status & PECI_INT_MASK);
+
+ /**
+ * In most cases, interrupt bits will be set one by one but also note
+ * that multiple interrupt bits could be set at the same time.
+ */
+ if (status & PECI_INT_TIMEOUT) {
+ dev_dbg(priv->dev, "PECI_INT_TIMEOUT\n");
+ status_ack |= PECI_INT_TIMEOUT;
+ }
+
+ if (status & PECI_INT_CONNECT) {
+ dev_dbg(priv->dev, "PECI_INT_CONNECT\n");
+ status_ack |= PECI_INT_CONNECT;
+ }
+
+ if (status & PECI_INT_W_FCS_BAD) {
+ dev_dbg(priv->dev, "PECI_INT_W_FCS_BAD\n");
+ status_ack |= PECI_INT_W_FCS_BAD;
+ }
+
+ if (status & PECI_INT_W_FCS_ABORT) {
+ dev_dbg(priv->dev, "PECI_INT_W_FCS_ABORT\n");
+ status_ack |= PECI_INT_W_FCS_ABORT;
+ }
+
+ /**
+ * All commands should be ended up with a PECI_INT_CMD_DONE bit set
+ * even in an error case.
+ */
+ if (status & PECI_INT_CMD_DONE) {
+ dev_dbg(priv->dev, "PECI_INT_CMD_DONE\n");
+ status_ack |= PECI_INT_CMD_DONE;
+ complete(&priv->xfer_complete);
+ }
+
+ regmap_write(priv->regmap, ASPEED_PECI_INT_STS, status_ack);
+ spin_unlock(&priv->lock);
+ return IRQ_HANDLED;
+}
+
+static int aspeed_peci_init_ctrl(struct aspeed_peci *priv)
+{
+ u32 msg_timing, addr_timing, rd_sampling_point;
+ u32 clk_freq, clk_divisor, clk_div_val = 0;
+ struct clk *clkin;
+ int ret;
+
+ clkin = devm_clk_get(priv->dev, NULL);
+ if (IS_ERR(clkin)) {
+ dev_err(priv->dev, "Failed to get clk source.\n");
+ return PTR_ERR(clkin);
+ }
+
+ ret = of_property_read_u32(priv->dev->of_node, "clock-frequency",
+ &clk_freq);
+ if (ret) {
+ dev_err(priv->dev,
+ "Could not read clock-frequency property.\n");
+ return ret;
+ }
+
+ clk_divisor = clk_get_rate(clkin) / clk_freq;
+ devm_clk_put(priv->dev, clkin);
+
+ while ((clk_divisor >> 1) && (clk_div_val < PECI_CLK_DIV_MAX))
+ clk_div_val++;
+
+ ret = of_property_read_u32(priv->dev->of_node, "msg-timing",
+ &msg_timing);
+ if (ret || msg_timing > PECI_MSG_TIMING_MAX) {
+ if (!ret)
+ dev_warn(priv->dev,
+ "Invalid msg-timing : %u, Use default : %u\n",
+ msg_timing, PECI_MSG_TIMING_DEFAULT);
+ msg_timing = PECI_MSG_TIMING_DEFAULT;
+ }
+
+ ret = of_property_read_u32(priv->dev->of_node, "addr-timing",
+ &addr_timing);
+ if (ret || addr_timing > PECI_ADDR_TIMING_MAX) {
+ if (!ret)
+ dev_warn(priv->dev,
+ "Invalid addr-timing : %u, Use default : %u\n",
+ addr_timing, PECI_ADDR_TIMING_DEFAULT);
+ addr_timing = PECI_ADDR_TIMING_DEFAULT;
+ }
+
+ ret = of_property_read_u32(priv->dev->of_node, "rd-sampling-point",
+ &rd_sampling_point);
+ if (ret || rd_sampling_point > PECI_RD_SAMPLING_POINT_MAX) {
+ if (!ret)
+ dev_warn(priv->dev,
+ "Invalid rd-sampling-point : %u. Use default : %u\n",
+ rd_sampling_point,
+ PECI_RD_SAMPLING_POINT_DEFAULT);
+ rd_sampling_point = PECI_RD_SAMPLING_POINT_DEFAULT;
+ }
+
+ ret = of_property_read_u32(priv->dev->of_node, "cmd-timeout-ms",
+ &priv->cmd_timeout_ms);
+ if (ret || priv->cmd_timeout_ms > PECI_CMD_TIMEOUT_MS_MAX ||
+ priv->cmd_timeout_ms == 0) {
+ if (!ret)
+ dev_warn(priv->dev,
+ "Invalid cmd-timeout-ms : %u. Use default : %u\n",
+ priv->cmd_timeout_ms,
+ PECI_CMD_TIMEOUT_MS_DEFAULT);
+ priv->cmd_timeout_ms = PECI_CMD_TIMEOUT_MS_DEFAULT;
+ }
+
+ regmap_write(priv->regmap, ASPEED_PECI_CTRL,
+ FIELD_PREP(PECI_CTRL_CLK_DIV_MASK, PECI_CLK_DIV_DEFAULT) |
+ PECI_CTRL_PECI_CLK_EN);
+
+ /**
+ * Timing negotiation period setting.
+ * The unit of the programmed value is 4 times of PECI clock period.
+ */
+ regmap_write(priv->regmap, ASPEED_PECI_TIMING,
+ FIELD_PREP(PECI_TIMING_MESSAGE_MASK, msg_timing) |
+ FIELD_PREP(PECI_TIMING_ADDRESS_MASK, addr_timing));
+
+ /* Clear interrupts */
+ regmap_write(priv->regmap, ASPEED_PECI_INT_STS, PECI_INT_MASK);
+
+ /* Enable interrupts */
+ regmap_write(priv->regmap, ASPEED_PECI_INT_CTRL, PECI_INT_MASK);
+
+ /* Read sampling point and clock speed setting */
+ regmap_write(priv->regmap, ASPEED_PECI_CTRL,
+ FIELD_PREP(PECI_CTRL_SAMPLING_MASK, rd_sampling_point) |
+ FIELD_PREP(PECI_CTRL_CLK_DIV_MASK, clk_div_val) |
+ PECI_CTRL_PECI_EN | PECI_CTRL_PECI_CLK_EN);
+
+ return 0;
+}
+
+static const struct regmap_config aspeed_peci_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = ASPEED_PECI_R_DATA7,
+ .val_format_endian = REGMAP_ENDIAN_LITTLE,
+ .fast_io = true,
+};
+
+static int aspeed_peci_xfer(struct peci_adapter *adapter,
+ struct peci_xfer_msg *msg)
+{
+ struct aspeed_peci *priv = peci_get_adapdata(adapter);
+
+ return aspeed_peci_xfer_native(priv, msg);
+}
+
+static int aspeed_peci_probe(struct platform_device *pdev)
+{
+ struct peci_adapter *adapter;
+ struct aspeed_peci *priv;
+ struct resource *res;
+ void __iomem *base;
+ u32 cmd_sts;
+ int ret;
+
+ adapter = peci_alloc_adapter(&pdev->dev, sizeof(*priv));
+ if (!adapter)
+ return -ENOMEM;
+
+ priv = peci_get_adapdata(adapter);
+ priv->adapter = adapter;
+ priv->dev = &pdev->dev;
+ dev_set_drvdata(&pdev->dev, priv);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base)) {
+ ret = PTR_ERR(base);
+ goto err_put_adapter_dev;
+ }
+
+ priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
+ &aspeed_peci_regmap_config);
+ if (IS_ERR(priv->regmap)) {
+ ret = PTR_ERR(priv->regmap);
+ goto err_put_adapter_dev;
+ }
+
+ /**
+ * We check that the regmap works on this very first access,
+ * but as this is an MMIO-backed regmap, subsequent regmap
+ * access is not going to fail and we skip error checks from
+ * this point.
+ */
+ ret = regmap_read(priv->regmap, ASPEED_PECI_CMD, &cmd_sts);
+ if (ret) {
+ ret = -EIO;
+ goto err_put_adapter_dev;
+ }
+
+ priv->irq = platform_get_irq(pdev, 0);
+ if (!priv->irq) {
+ ret = -ENODEV;
+ goto err_put_adapter_dev;
+ }
+
+ ret = devm_request_irq(&pdev->dev, priv->irq, aspeed_peci_irq_handler,
+ 0, "peci-aspeed-irq", priv);
+ if (ret)
+ goto err_put_adapter_dev;
+
+ init_completion(&priv->xfer_complete);
+ spin_lock_init(&priv->lock);
+
+ priv->adapter->owner = THIS_MODULE;
+ priv->adapter->dev.of_node = of_node_get(dev_of_node(priv->dev));
+ strlcpy(priv->adapter->name, pdev->name, sizeof(priv->adapter->name));
+ priv->adapter->xfer = aspeed_peci_xfer;
+
+ priv->rst = devm_reset_control_get(&pdev->dev, NULL);
+ if (IS_ERR(priv->rst)) {
+ dev_err(&pdev->dev,
+ "missing or invalid reset controller entry");
+ ret = PTR_ERR(priv->rst);
+ goto err_put_adapter_dev;
+ }
+ reset_control_deassert(priv->rst);
+
+ ret = aspeed_peci_init_ctrl(priv);
+ if (ret)
+ goto err_put_adapter_dev;
+
+ ret = peci_add_adapter(priv->adapter);
+ if (ret)
+ goto err_put_adapter_dev;
+
+ dev_info(&pdev->dev, "peci bus %d registered, irq %d\n",
+ priv->adapter->nr, priv->irq);
+
+ return 0;
+
+err_put_adapter_dev:
+ put_device(&adapter->dev);
+ return ret;
+}
+
+static int aspeed_peci_remove(struct platform_device *pdev)
+{
+ struct aspeed_peci *priv = dev_get_drvdata(&pdev->dev);
+
+ reset_control_assert(priv->rst);
+ peci_del_adapter(priv->adapter);
+ of_node_put(priv->adapter->dev.of_node);
+
+ return 0;
+}
+
+static const struct of_device_id aspeed_peci_of_table[] = {
+ { .compatible = "aspeed,ast2400-peci", },
+ { .compatible = "aspeed,ast2500-peci", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, aspeed_peci_of_table);
+
+static struct platform_driver aspeed_peci_driver = {
+ .probe = aspeed_peci_probe,
+ .remove = aspeed_peci_remove,
+ .driver = {
+ .name = "peci-aspeed",
+ .of_match_table = of_match_ptr(aspeed_peci_of_table),
+ },
+};
+module_platform_driver(aspeed_peci_driver);
+
+MODULE_AUTHOR("Ryan Chen <ryan_chen@aspeedtech.com>");
+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");
+MODULE_DESCRIPTION("ASPEED PECI driver");
+MODULE_LICENSE("GPL v2");
--
2.18.0
^ permalink raw reply related
* [PATCH v7 06/12] peci: Add a PECI adapter driver for Aspeed AST24xx/AST25xx
From: Jae Hyun Yoo @ 2018-07-23 21:47 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180723214751.1733-1-jae.hyun.yoo@linux.intel.com>
This commit adds PECI adapter driver implementation for Aspeed
AST24xx/AST25xx SoCs.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Reviewed-by: James Feist <james.feist@linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ryan Chen <ryan_chen@aspeedtech.com>
---
drivers/peci/Kconfig | 27 ++
drivers/peci/Makefile | 3 +
drivers/peci/peci-aspeed.c | 498 +++++++++++++++++++++++++++++++++++++
3 files changed, 528 insertions(+)
create mode 100644 drivers/peci/peci-aspeed.c
diff --git a/drivers/peci/Kconfig b/drivers/peci/Kconfig
index 4ccacb22a356..9e9845ebcff4 100644
--- a/drivers/peci/Kconfig
+++ b/drivers/peci/Kconfig
@@ -10,3 +10,30 @@ config PECI
The Platform Environment Control Interface (PECI) is a one-wire bus
interface that provides a communication channel from Intel processors
and chipset components to external monitoring or control devices.
+
+ If you want PECI support, you should say Y here and also to the
+ specific driver for your bus adapter(s) below.
+
+if PECI
+
+#
+# PECI hardware bus configuration
+#
+
+menu "PECI Hardware Bus support"
+
+config PECI_ASPEED
+ tristate "ASPEED PECI support"
+ select REGMAP_MMIO
+ depends on OF
+ depends on ARCH_ASPEED || COMPILE_TEST
+ help
+ Say Y here if you want support for the Platform Environment Control
+ Interface (PECI) bus adapter driver on the ASPEED SoCs.
+
+ This support is also available as a module. If so, the module
+ will be called peci-aspeed.
+
+endmenu
+
+endif # PECI
diff --git a/drivers/peci/Makefile b/drivers/peci/Makefile
index 9e8615e0d3ff..886285e69765 100644
--- a/drivers/peci/Makefile
+++ b/drivers/peci/Makefile
@@ -4,3 +4,6 @@
# Core functionality
obj-$(CONFIG_PECI) += peci-core.o
+
+# Hardware specific bus drivers
+obj-$(CONFIG_PECI_ASPEED) += peci-aspeed.o
diff --git a/drivers/peci/peci-aspeed.c b/drivers/peci/peci-aspeed.c
new file mode 100644
index 000000000000..8070ec18d484
--- /dev/null
+++ b/drivers/peci/peci-aspeed.c
@@ -0,0 +1,498 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2012-2017 ASPEED Technology Inc.
+// Copyright (c) 2018 Intel Corporation
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/peci.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+/* ASPEED PECI Registers */
+#define ASPEED_PECI_CTRL 0x00
+#define ASPEED_PECI_TIMING 0x04
+#define ASPEED_PECI_CMD 0x08
+#define ASPEED_PECI_CMD_CTRL 0x0c
+#define ASPEED_PECI_EXP_FCS 0x10
+#define ASPEED_PECI_CAP_FCS 0x14
+#define ASPEED_PECI_INT_CTRL 0x18
+#define ASPEED_PECI_INT_STS 0x1c
+#define ASPEED_PECI_W_DATA0 0x20
+#define ASPEED_PECI_W_DATA1 0x24
+#define ASPEED_PECI_W_DATA2 0x28
+#define ASPEED_PECI_W_DATA3 0x2c
+#define ASPEED_PECI_R_DATA0 0x30
+#define ASPEED_PECI_R_DATA1 0x34
+#define ASPEED_PECI_R_DATA2 0x38
+#define ASPEED_PECI_R_DATA3 0x3c
+#define ASPEED_PECI_W_DATA4 0x40
+#define ASPEED_PECI_W_DATA5 0x44
+#define ASPEED_PECI_W_DATA6 0x48
+#define ASPEED_PECI_W_DATA7 0x4c
+#define ASPEED_PECI_R_DATA4 0x50
+#define ASPEED_PECI_R_DATA5 0x54
+#define ASPEED_PECI_R_DATA6 0x58
+#define ASPEED_PECI_R_DATA7 0x5c
+
+/* ASPEED_PECI_CTRL - 0x00 : Control Register */
+#define PECI_CTRL_SAMPLING_MASK GENMASK(19, 16)
+#define PECI_CTRL_READ_MODE_MASK GENMASK(13, 12)
+#define PECI_CTRL_READ_MODE_COUNT BIT(12)
+#define PECI_CTRL_READ_MODE_DBG BIT(13)
+#define PECI_CTRL_CLK_SOURCE_MASK BIT(11)
+#define PECI_CTRL_CLK_DIV_MASK GENMASK(10, 8)
+#define PECI_CTRL_INVERT_OUT BIT(7)
+#define PECI_CTRL_INVERT_IN BIT(6)
+#define PECI_CTRL_BUS_CONTENT_EN BIT(5)
+#define PECI_CTRL_PECI_EN BIT(4)
+#define PECI_CTRL_PECI_CLK_EN BIT(0)
+
+/* ASPEED_PECI_TIMING - 0x04 : Timing Negotiation Register */
+#define PECI_TIMING_MESSAGE_MASK GENMASK(15, 8)
+#define PECI_TIMING_ADDRESS_MASK GENMASK(7, 0)
+
+/* ASPEED_PECI_CMD - 0x08 : Command Register */
+#define PECI_CMD_PIN_MON BIT(31)
+#define PECI_CMD_STS_MASK GENMASK(27, 24)
+#define PECI_CMD_IDLE_MASK (PECI_CMD_STS_MASK | PECI_CMD_PIN_MON)
+#define PECI_CMD_FIRE BIT(0)
+
+/* ASPEED_PECI_LEN - 0x0C : Read/Write Length Register */
+#define PECI_AW_FCS_EN BIT(31)
+#define PECI_READ_LEN_MASK GENMASK(23, 16)
+#define PECI_WRITE_LEN_MASK GENMASK(15, 8)
+#define PECI_TAGET_ADDR_MASK GENMASK(7, 0)
+
+/* ASPEED_PECI_EXP_FCS - 0x10 : Expected FCS Data Register */
+#define PECI_EXPECT_READ_FCS_MASK GENMASK(23, 16)
+#define PECI_EXPECT_AW_FCS_AUTO_MASK GENMASK(15, 8)
+#define PECI_EXPECT_WRITE_FCS_MASK GENMASK(7, 0)
+
+/* ASPEED_PECI_CAP_FCS - 0x14 : Captured FCS Data Register */
+#define PECI_CAPTURE_READ_FCS_MASK GENMASK(23, 16)
+#define PECI_CAPTURE_WRITE_FCS_MASK GENMASK(7, 0)
+
+/* ASPEED_PECI_INT_CTRL/STS - 0x18/0x1c : Interrupt Register */
+#define PECI_INT_TIMING_RESULT_MASK GENMASK(31, 30)
+#define PECI_INT_TIMEOUT BIT(4)
+#define PECI_INT_CONNECT BIT(3)
+#define PECI_INT_W_FCS_BAD BIT(2)
+#define PECI_INT_W_FCS_ABORT BIT(1)
+#define PECI_INT_CMD_DONE BIT(0)
+
+#define PECI_INT_MASK (PECI_INT_TIMEOUT | PECI_INT_CONNECT | \
+ PECI_INT_W_FCS_BAD | PECI_INT_W_FCS_ABORT | \
+ PECI_INT_CMD_DONE)
+
+#define PECI_IDLE_CHECK_TIMEOUT_USEC 50000
+#define PECI_IDLE_CHECK_INTERVAL_USEC 10000
+
+#define PECI_RD_SAMPLING_POINT_DEFAULT 8
+#define PECI_RD_SAMPLING_POINT_MAX 15
+#define PECI_CLK_DIV_DEFAULT 0
+#define PECI_CLK_DIV_MAX 7
+#define PECI_MSG_TIMING_DEFAULT 1
+#define PECI_MSG_TIMING_MAX 255
+#define PECI_ADDR_TIMING_DEFAULT 1
+#define PECI_ADDR_TIMING_MAX 255
+#define PECI_CMD_TIMEOUT_MS_DEFAULT 1000
+#define PECI_CMD_TIMEOUT_MS_MAX 60000
+
+struct aspeed_peci {
+ struct peci_adapter *adapter;
+ struct device *dev;
+ struct regmap *regmap;
+ struct reset_control *rst;
+ int irq;
+ spinlock_t lock; /* to sync completion status handling */
+ struct completion xfer_complete;
+ u32 status;
+ u32 cmd_timeout_ms;
+};
+
+static int aspeed_peci_xfer_native(struct aspeed_peci *priv,
+ struct peci_xfer_msg *msg)
+{
+ long err, timeout = msecs_to_jiffies(priv->cmd_timeout_ms);
+ u32 peci_head, peci_state, rx_data, cmd_sts;
+ unsigned long flags;
+ int i, rc;
+ uint reg;
+
+ /* Check command sts and bus idle state */
+ rc = regmap_read_poll_timeout(priv->regmap, ASPEED_PECI_CMD, cmd_sts,
+ !(cmd_sts & PECI_CMD_IDLE_MASK),
+ PECI_IDLE_CHECK_INTERVAL_USEC,
+ PECI_IDLE_CHECK_TIMEOUT_USEC);
+ if (rc)
+ return rc; /* -ETIMEDOUT */
+
+ spin_lock_irqsave(&priv->lock, flags);
+ reinit_completion(&priv->xfer_complete);
+
+ peci_head = FIELD_PREP(PECI_TAGET_ADDR_MASK, msg->addr) |
+ FIELD_PREP(PECI_WRITE_LEN_MASK, msg->tx_len) |
+ FIELD_PREP(PECI_READ_LEN_MASK, msg->rx_len);
+
+ regmap_write(priv->regmap, ASPEED_PECI_CMD_CTRL, peci_head);
+
+ for (i = 0; i < msg->tx_len; i += 4) {
+ reg = i < 16 ? ASPEED_PECI_W_DATA0 + i % 16 :
+ ASPEED_PECI_W_DATA4 + i % 16;
+ regmap_write(priv->regmap, reg,
+ le32_to_cpup((__le32 *)&msg->tx_buf[i]));
+ }
+
+ dev_dbg(priv->dev, "HEAD : 0x%08x\n", peci_head);
+ print_hex_dump_debug("TX : ", DUMP_PREFIX_NONE, 16, 1,
+ msg->tx_buf, msg->tx_len, true);
+
+ priv->status = 0;
+ regmap_write(priv->regmap, ASPEED_PECI_CMD, PECI_CMD_FIRE);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ err = wait_for_completion_interruptible_timeout(&priv->xfer_complete,
+ timeout);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ dev_dbg(priv->dev, "INT_STS : 0x%08x\n", priv->status);
+ regmap_read(priv->regmap, ASPEED_PECI_CMD, &peci_state);
+ dev_dbg(priv->dev, "PECI_STATE : 0x%lx\n",
+ FIELD_GET(PECI_CMD_STS_MASK, peci_state));
+
+ regmap_write(priv->regmap, ASPEED_PECI_CMD, 0);
+
+ if (err <= 0 || priv->status != PECI_INT_CMD_DONE) {
+ if (err < 0) { /* -ERESTARTSYS */
+ rc = (int)err;
+ goto err_irqrestore;
+ } else if (err == 0) {
+ dev_dbg(priv->dev, "Timeout waiting for a response!\n");
+ rc = -ETIMEDOUT;
+ goto err_irqrestore;
+ }
+
+ dev_dbg(priv->dev, "No valid response!\n");
+ rc = -EIO;
+ goto err_irqrestore;
+ }
+
+ /**
+ * Note that rx_len and rx_buf size can be an odd number.
+ * Byte handling is more efficient.
+ */
+ for (i = 0; i < msg->rx_len; i++) {
+ u8 byte_offset = i % 4;
+
+ if (byte_offset == 0) {
+ reg = i < 16 ? ASPEED_PECI_R_DATA0 + i % 16 :
+ ASPEED_PECI_R_DATA4 + i % 16;
+ regmap_read(priv->regmap, reg, &rx_data);
+ }
+
+ msg->rx_buf[i] = (u8)(rx_data >> (byte_offset << 3));
+ }
+
+ print_hex_dump_debug("RX : ", DUMP_PREFIX_NONE, 16, 1,
+ msg->rx_buf, msg->rx_len, true);
+
+ regmap_read(priv->regmap, ASPEED_PECI_CMD, &peci_state);
+ dev_dbg(priv->dev, "PECI_STATE : 0x%lx\n",
+ FIELD_GET(PECI_CMD_STS_MASK, peci_state));
+ dev_dbg(priv->dev, "------------------------\n");
+
+err_irqrestore:
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return rc;
+}
+
+static irqreturn_t aspeed_peci_irq_handler(int irq, void *arg)
+{
+ struct aspeed_peci *priv = arg;
+ u32 status_ack = 0;
+ u32 status;
+
+ spin_lock(&priv->lock);
+ regmap_read(priv->regmap, ASPEED_PECI_INT_STS, &status);
+ priv->status |= (status & PECI_INT_MASK);
+
+ /**
+ * In most cases, interrupt bits will be set one by one but also note
+ * that multiple interrupt bits could be set at the same time.
+ */
+ if (status & PECI_INT_TIMEOUT) {
+ dev_dbg(priv->dev, "PECI_INT_TIMEOUT\n");
+ status_ack |= PECI_INT_TIMEOUT;
+ }
+
+ if (status & PECI_INT_CONNECT) {
+ dev_dbg(priv->dev, "PECI_INT_CONNECT\n");
+ status_ack |= PECI_INT_CONNECT;
+ }
+
+ if (status & PECI_INT_W_FCS_BAD) {
+ dev_dbg(priv->dev, "PECI_INT_W_FCS_BAD\n");
+ status_ack |= PECI_INT_W_FCS_BAD;
+ }
+
+ if (status & PECI_INT_W_FCS_ABORT) {
+ dev_dbg(priv->dev, "PECI_INT_W_FCS_ABORT\n");
+ status_ack |= PECI_INT_W_FCS_ABORT;
+ }
+
+ /**
+ * All commands should be ended up with a PECI_INT_CMD_DONE bit set
+ * even in an error case.
+ */
+ if (status & PECI_INT_CMD_DONE) {
+ dev_dbg(priv->dev, "PECI_INT_CMD_DONE\n");
+ status_ack |= PECI_INT_CMD_DONE;
+ complete(&priv->xfer_complete);
+ }
+
+ regmap_write(priv->regmap, ASPEED_PECI_INT_STS, status_ack);
+ spin_unlock(&priv->lock);
+ return IRQ_HANDLED;
+}
+
+static int aspeed_peci_init_ctrl(struct aspeed_peci *priv)
+{
+ u32 msg_timing, addr_timing, rd_sampling_point;
+ u32 clk_freq, clk_divisor, clk_div_val = 0;
+ struct clk *clkin;
+ int ret;
+
+ clkin = devm_clk_get(priv->dev, NULL);
+ if (IS_ERR(clkin)) {
+ dev_err(priv->dev, "Failed to get clk source.\n");
+ return PTR_ERR(clkin);
+ }
+
+ ret = of_property_read_u32(priv->dev->of_node, "clock-frequency",
+ &clk_freq);
+ if (ret) {
+ dev_err(priv->dev,
+ "Could not read clock-frequency property.\n");
+ return ret;
+ }
+
+ clk_divisor = clk_get_rate(clkin) / clk_freq;
+ devm_clk_put(priv->dev, clkin);
+
+ while ((clk_divisor >> 1) && (clk_div_val < PECI_CLK_DIV_MAX))
+ clk_div_val++;
+
+ ret = of_property_read_u32(priv->dev->of_node, "msg-timing",
+ &msg_timing);
+ if (ret || msg_timing > PECI_MSG_TIMING_MAX) {
+ if (!ret)
+ dev_warn(priv->dev,
+ "Invalid msg-timing : %u, Use default : %u\n",
+ msg_timing, PECI_MSG_TIMING_DEFAULT);
+ msg_timing = PECI_MSG_TIMING_DEFAULT;
+ }
+
+ ret = of_property_read_u32(priv->dev->of_node, "addr-timing",
+ &addr_timing);
+ if (ret || addr_timing > PECI_ADDR_TIMING_MAX) {
+ if (!ret)
+ dev_warn(priv->dev,
+ "Invalid addr-timing : %u, Use default : %u\n",
+ addr_timing, PECI_ADDR_TIMING_DEFAULT);
+ addr_timing = PECI_ADDR_TIMING_DEFAULT;
+ }
+
+ ret = of_property_read_u32(priv->dev->of_node, "rd-sampling-point",
+ &rd_sampling_point);
+ if (ret || rd_sampling_point > PECI_RD_SAMPLING_POINT_MAX) {
+ if (!ret)
+ dev_warn(priv->dev,
+ "Invalid rd-sampling-point : %u. Use default : %u\n",
+ rd_sampling_point,
+ PECI_RD_SAMPLING_POINT_DEFAULT);
+ rd_sampling_point = PECI_RD_SAMPLING_POINT_DEFAULT;
+ }
+
+ ret = of_property_read_u32(priv->dev->of_node, "cmd-timeout-ms",
+ &priv->cmd_timeout_ms);
+ if (ret || priv->cmd_timeout_ms > PECI_CMD_TIMEOUT_MS_MAX ||
+ priv->cmd_timeout_ms == 0) {
+ if (!ret)
+ dev_warn(priv->dev,
+ "Invalid cmd-timeout-ms : %u. Use default : %u\n",
+ priv->cmd_timeout_ms,
+ PECI_CMD_TIMEOUT_MS_DEFAULT);
+ priv->cmd_timeout_ms = PECI_CMD_TIMEOUT_MS_DEFAULT;
+ }
+
+ regmap_write(priv->regmap, ASPEED_PECI_CTRL,
+ FIELD_PREP(PECI_CTRL_CLK_DIV_MASK, PECI_CLK_DIV_DEFAULT) |
+ PECI_CTRL_PECI_CLK_EN);
+
+ /**
+ * Timing negotiation period setting.
+ * The unit of the programmed value is 4 times of PECI clock period.
+ */
+ regmap_write(priv->regmap, ASPEED_PECI_TIMING,
+ FIELD_PREP(PECI_TIMING_MESSAGE_MASK, msg_timing) |
+ FIELD_PREP(PECI_TIMING_ADDRESS_MASK, addr_timing));
+
+ /* Clear interrupts */
+ regmap_write(priv->regmap, ASPEED_PECI_INT_STS, PECI_INT_MASK);
+
+ /* Enable interrupts */
+ regmap_write(priv->regmap, ASPEED_PECI_INT_CTRL, PECI_INT_MASK);
+
+ /* Read sampling point and clock speed setting */
+ regmap_write(priv->regmap, ASPEED_PECI_CTRL,
+ FIELD_PREP(PECI_CTRL_SAMPLING_MASK, rd_sampling_point) |
+ FIELD_PREP(PECI_CTRL_CLK_DIV_MASK, clk_div_val) |
+ PECI_CTRL_PECI_EN | PECI_CTRL_PECI_CLK_EN);
+
+ return 0;
+}
+
+static const struct regmap_config aspeed_peci_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = ASPEED_PECI_R_DATA7,
+ .val_format_endian = REGMAP_ENDIAN_LITTLE,
+ .fast_io = true,
+};
+
+static int aspeed_peci_xfer(struct peci_adapter *adapter,
+ struct peci_xfer_msg *msg)
+{
+ struct aspeed_peci *priv = peci_get_adapdata(adapter);
+
+ return aspeed_peci_xfer_native(priv, msg);
+}
+
+static int aspeed_peci_probe(struct platform_device *pdev)
+{
+ struct peci_adapter *adapter;
+ struct aspeed_peci *priv;
+ struct resource *res;
+ void __iomem *base;
+ u32 cmd_sts;
+ int ret;
+
+ adapter = peci_alloc_adapter(&pdev->dev, sizeof(*priv));
+ if (!adapter)
+ return -ENOMEM;
+
+ priv = peci_get_adapdata(adapter);
+ priv->adapter = adapter;
+ priv->dev = &pdev->dev;
+ dev_set_drvdata(&pdev->dev, priv);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base)) {
+ ret = PTR_ERR(base);
+ goto err_put_adapter_dev;
+ }
+
+ priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
+ &aspeed_peci_regmap_config);
+ if (IS_ERR(priv->regmap)) {
+ ret = PTR_ERR(priv->regmap);
+ goto err_put_adapter_dev;
+ }
+
+ /**
+ * We check that the regmap works on this very first access,
+ * but as this is an MMIO-backed regmap, subsequent regmap
+ * access is not going to fail and we skip error checks from
+ * this point.
+ */
+ ret = regmap_read(priv->regmap, ASPEED_PECI_CMD, &cmd_sts);
+ if (ret) {
+ ret = -EIO;
+ goto err_put_adapter_dev;
+ }
+
+ priv->irq = platform_get_irq(pdev, 0);
+ if (!priv->irq) {
+ ret = -ENODEV;
+ goto err_put_adapter_dev;
+ }
+
+ ret = devm_request_irq(&pdev->dev, priv->irq, aspeed_peci_irq_handler,
+ 0, "peci-aspeed-irq", priv);
+ if (ret)
+ goto err_put_adapter_dev;
+
+ init_completion(&priv->xfer_complete);
+ spin_lock_init(&priv->lock);
+
+ priv->adapter->owner = THIS_MODULE;
+ priv->adapter->dev.of_node = of_node_get(dev_of_node(priv->dev));
+ strlcpy(priv->adapter->name, pdev->name, sizeof(priv->adapter->name));
+ priv->adapter->xfer = aspeed_peci_xfer;
+
+ priv->rst = devm_reset_control_get(&pdev->dev, NULL);
+ if (IS_ERR(priv->rst)) {
+ dev_err(&pdev->dev,
+ "missing or invalid reset controller entry");
+ ret = PTR_ERR(priv->rst);
+ goto err_put_adapter_dev;
+ }
+ reset_control_deassert(priv->rst);
+
+ ret = aspeed_peci_init_ctrl(priv);
+ if (ret)
+ goto err_put_adapter_dev;
+
+ ret = peci_add_adapter(priv->adapter);
+ if (ret)
+ goto err_put_adapter_dev;
+
+ dev_info(&pdev->dev, "peci bus %d registered, irq %d\n",
+ priv->adapter->nr, priv->irq);
+
+ return 0;
+
+err_put_adapter_dev:
+ put_device(&adapter->dev);
+ return ret;
+}
+
+static int aspeed_peci_remove(struct platform_device *pdev)
+{
+ struct aspeed_peci *priv = dev_get_drvdata(&pdev->dev);
+
+ reset_control_assert(priv->rst);
+ peci_del_adapter(priv->adapter);
+ of_node_put(priv->adapter->dev.of_node);
+
+ return 0;
+}
+
+static const struct of_device_id aspeed_peci_of_table[] = {
+ { .compatible = "aspeed,ast2400-peci", },
+ { .compatible = "aspeed,ast2500-peci", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, aspeed_peci_of_table);
+
+static struct platform_driver aspeed_peci_driver = {
+ .probe = aspeed_peci_probe,
+ .remove = aspeed_peci_remove,
+ .driver = {
+ .name = "peci-aspeed",
+ .of_match_table = of_match_ptr(aspeed_peci_of_table),
+ },
+};
+module_platform_driver(aspeed_peci_driver);
+
+MODULE_AUTHOR("Ryan Chen <ryan_chen@aspeedtech.com>");
+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");
+MODULE_DESCRIPTION("ASPEED PECI driver");
+MODULE_LICENSE("GPL v2");
--
2.18.0
^ permalink raw reply related
* [PATCH v7 06/12] peci: Add a PECI adapter driver for Aspeed AST24xx/AST25xx
From: Jae Hyun Yoo @ 2018-07-23 21:47 UTC (permalink / raw)
To: Jean Delvare, Guenter Roeck, Rob Herring, Mark Rutland, Lee Jones,
Joel Stanley, Andrew Jeffery, Jonathan Corbet, Greg Kroah-Hartman,
Gustavo Pimentel, Kishon Vijay Abraham I, Lorenzo Pieralisi,
Darrick J . Wong, Eric Sandeen, Arnd Bergmann, Wu Hao,
Tomohiro Kusumi, Bryant G . Ly, Frederic Barrat, David S . Miller,
Mauro Carvalho Chehab, Andrew Morton, Randy Dunlap,
Philippe Ombredanne, Vinod Koul, Stephen Boyd, David Kershner,
Uwe Kleine-Konig, Sagar Dharia, Johan Hovold, Thomas Gleixner,
Juergen Gross, Cyrille Pitchen
Cc: linux-hwmon, devicetree, linux-kernel, linux-arm-kernel,
linux-aspeed, linux-doc, openbmc, Jae Hyun Yoo, Andy Shevchenko,
Robin Murphy, Ryan Chen
In-Reply-To: <20180723214751.1733-1-jae.hyun.yoo@linux.intel.com>
This commit adds PECI adapter driver implementation for Aspeed
AST24xx/AST25xx SoCs.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Reviewed-by: James Feist <james.feist@linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ryan Chen <ryan_chen@aspeedtech.com>
---
drivers/peci/Kconfig | 27 ++
drivers/peci/Makefile | 3 +
drivers/peci/peci-aspeed.c | 498 +++++++++++++++++++++++++++++++++++++
3 files changed, 528 insertions(+)
create mode 100644 drivers/peci/peci-aspeed.c
diff --git a/drivers/peci/Kconfig b/drivers/peci/Kconfig
index 4ccacb22a356..9e9845ebcff4 100644
--- a/drivers/peci/Kconfig
+++ b/drivers/peci/Kconfig
@@ -10,3 +10,30 @@ config PECI
The Platform Environment Control Interface (PECI) is a one-wire bus
interface that provides a communication channel from Intel processors
and chipset components to external monitoring or control devices.
+
+ If you want PECI support, you should say Y here and also to the
+ specific driver for your bus adapter(s) below.
+
+if PECI
+
+#
+# PECI hardware bus configuration
+#
+
+menu "PECI Hardware Bus support"
+
+config PECI_ASPEED
+ tristate "ASPEED PECI support"
+ select REGMAP_MMIO
+ depends on OF
+ depends on ARCH_ASPEED || COMPILE_TEST
+ help
+ Say Y here if you want support for the Platform Environment Control
+ Interface (PECI) bus adapter driver on the ASPEED SoCs.
+
+ This support is also available as a module. If so, the module
+ will be called peci-aspeed.
+
+endmenu
+
+endif # PECI
diff --git a/drivers/peci/Makefile b/drivers/peci/Makefile
index 9e8615e0d3ff..886285e69765 100644
--- a/drivers/peci/Makefile
+++ b/drivers/peci/Makefile
@@ -4,3 +4,6 @@
# Core functionality
obj-$(CONFIG_PECI) += peci-core.o
+
+# Hardware specific bus drivers
+obj-$(CONFIG_PECI_ASPEED) += peci-aspeed.o
diff --git a/drivers/peci/peci-aspeed.c b/drivers/peci/peci-aspeed.c
new file mode 100644
index 000000000000..8070ec18d484
--- /dev/null
+++ b/drivers/peci/peci-aspeed.c
@@ -0,0 +1,498 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2012-2017 ASPEED Technology Inc.
+// Copyright (c) 2018 Intel Corporation
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/peci.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+/* ASPEED PECI Registers */
+#define ASPEED_PECI_CTRL 0x00
+#define ASPEED_PECI_TIMING 0x04
+#define ASPEED_PECI_CMD 0x08
+#define ASPEED_PECI_CMD_CTRL 0x0c
+#define ASPEED_PECI_EXP_FCS 0x10
+#define ASPEED_PECI_CAP_FCS 0x14
+#define ASPEED_PECI_INT_CTRL 0x18
+#define ASPEED_PECI_INT_STS 0x1c
+#define ASPEED_PECI_W_DATA0 0x20
+#define ASPEED_PECI_W_DATA1 0x24
+#define ASPEED_PECI_W_DATA2 0x28
+#define ASPEED_PECI_W_DATA3 0x2c
+#define ASPEED_PECI_R_DATA0 0x30
+#define ASPEED_PECI_R_DATA1 0x34
+#define ASPEED_PECI_R_DATA2 0x38
+#define ASPEED_PECI_R_DATA3 0x3c
+#define ASPEED_PECI_W_DATA4 0x40
+#define ASPEED_PECI_W_DATA5 0x44
+#define ASPEED_PECI_W_DATA6 0x48
+#define ASPEED_PECI_W_DATA7 0x4c
+#define ASPEED_PECI_R_DATA4 0x50
+#define ASPEED_PECI_R_DATA5 0x54
+#define ASPEED_PECI_R_DATA6 0x58
+#define ASPEED_PECI_R_DATA7 0x5c
+
+/* ASPEED_PECI_CTRL - 0x00 : Control Register */
+#define PECI_CTRL_SAMPLING_MASK GENMASK(19, 16)
+#define PECI_CTRL_READ_MODE_MASK GENMASK(13, 12)
+#define PECI_CTRL_READ_MODE_COUNT BIT(12)
+#define PECI_CTRL_READ_MODE_DBG BIT(13)
+#define PECI_CTRL_CLK_SOURCE_MASK BIT(11)
+#define PECI_CTRL_CLK_DIV_MASK GENMASK(10, 8)
+#define PECI_CTRL_INVERT_OUT BIT(7)
+#define PECI_CTRL_INVERT_IN BIT(6)
+#define PECI_CTRL_BUS_CONTENT_EN BIT(5)
+#define PECI_CTRL_PECI_EN BIT(4)
+#define PECI_CTRL_PECI_CLK_EN BIT(0)
+
+/* ASPEED_PECI_TIMING - 0x04 : Timing Negotiation Register */
+#define PECI_TIMING_MESSAGE_MASK GENMASK(15, 8)
+#define PECI_TIMING_ADDRESS_MASK GENMASK(7, 0)
+
+/* ASPEED_PECI_CMD - 0x08 : Command Register */
+#define PECI_CMD_PIN_MON BIT(31)
+#define PECI_CMD_STS_MASK GENMASK(27, 24)
+#define PECI_CMD_IDLE_MASK (PECI_CMD_STS_MASK | PECI_CMD_PIN_MON)
+#define PECI_CMD_FIRE BIT(0)
+
+/* ASPEED_PECI_LEN - 0x0C : Read/Write Length Register */
+#define PECI_AW_FCS_EN BIT(31)
+#define PECI_READ_LEN_MASK GENMASK(23, 16)
+#define PECI_WRITE_LEN_MASK GENMASK(15, 8)
+#define PECI_TAGET_ADDR_MASK GENMASK(7, 0)
+
+/* ASPEED_PECI_EXP_FCS - 0x10 : Expected FCS Data Register */
+#define PECI_EXPECT_READ_FCS_MASK GENMASK(23, 16)
+#define PECI_EXPECT_AW_FCS_AUTO_MASK GENMASK(15, 8)
+#define PECI_EXPECT_WRITE_FCS_MASK GENMASK(7, 0)
+
+/* ASPEED_PECI_CAP_FCS - 0x14 : Captured FCS Data Register */
+#define PECI_CAPTURE_READ_FCS_MASK GENMASK(23, 16)
+#define PECI_CAPTURE_WRITE_FCS_MASK GENMASK(7, 0)
+
+/* ASPEED_PECI_INT_CTRL/STS - 0x18/0x1c : Interrupt Register */
+#define PECI_INT_TIMING_RESULT_MASK GENMASK(31, 30)
+#define PECI_INT_TIMEOUT BIT(4)
+#define PECI_INT_CONNECT BIT(3)
+#define PECI_INT_W_FCS_BAD BIT(2)
+#define PECI_INT_W_FCS_ABORT BIT(1)
+#define PECI_INT_CMD_DONE BIT(0)
+
+#define PECI_INT_MASK (PECI_INT_TIMEOUT | PECI_INT_CONNECT | \
+ PECI_INT_W_FCS_BAD | PECI_INT_W_FCS_ABORT | \
+ PECI_INT_CMD_DONE)
+
+#define PECI_IDLE_CHECK_TIMEOUT_USEC 50000
+#define PECI_IDLE_CHECK_INTERVAL_USEC 10000
+
+#define PECI_RD_SAMPLING_POINT_DEFAULT 8
+#define PECI_RD_SAMPLING_POINT_MAX 15
+#define PECI_CLK_DIV_DEFAULT 0
+#define PECI_CLK_DIV_MAX 7
+#define PECI_MSG_TIMING_DEFAULT 1
+#define PECI_MSG_TIMING_MAX 255
+#define PECI_ADDR_TIMING_DEFAULT 1
+#define PECI_ADDR_TIMING_MAX 255
+#define PECI_CMD_TIMEOUT_MS_DEFAULT 1000
+#define PECI_CMD_TIMEOUT_MS_MAX 60000
+
+struct aspeed_peci {
+ struct peci_adapter *adapter;
+ struct device *dev;
+ struct regmap *regmap;
+ struct reset_control *rst;
+ int irq;
+ spinlock_t lock; /* to sync completion status handling */
+ struct completion xfer_complete;
+ u32 status;
+ u32 cmd_timeout_ms;
+};
+
+static int aspeed_peci_xfer_native(struct aspeed_peci *priv,
+ struct peci_xfer_msg *msg)
+{
+ long err, timeout = msecs_to_jiffies(priv->cmd_timeout_ms);
+ u32 peci_head, peci_state, rx_data, cmd_sts;
+ unsigned long flags;
+ int i, rc;
+ uint reg;
+
+ /* Check command sts and bus idle state */
+ rc = regmap_read_poll_timeout(priv->regmap, ASPEED_PECI_CMD, cmd_sts,
+ !(cmd_sts & PECI_CMD_IDLE_MASK),
+ PECI_IDLE_CHECK_INTERVAL_USEC,
+ PECI_IDLE_CHECK_TIMEOUT_USEC);
+ if (rc)
+ return rc; /* -ETIMEDOUT */
+
+ spin_lock_irqsave(&priv->lock, flags);
+ reinit_completion(&priv->xfer_complete);
+
+ peci_head = FIELD_PREP(PECI_TAGET_ADDR_MASK, msg->addr) |
+ FIELD_PREP(PECI_WRITE_LEN_MASK, msg->tx_len) |
+ FIELD_PREP(PECI_READ_LEN_MASK, msg->rx_len);
+
+ regmap_write(priv->regmap, ASPEED_PECI_CMD_CTRL, peci_head);
+
+ for (i = 0; i < msg->tx_len; i += 4) {
+ reg = i < 16 ? ASPEED_PECI_W_DATA0 + i % 16 :
+ ASPEED_PECI_W_DATA4 + i % 16;
+ regmap_write(priv->regmap, reg,
+ le32_to_cpup((__le32 *)&msg->tx_buf[i]));
+ }
+
+ dev_dbg(priv->dev, "HEAD : 0x%08x\n", peci_head);
+ print_hex_dump_debug("TX : ", DUMP_PREFIX_NONE, 16, 1,
+ msg->tx_buf, msg->tx_len, true);
+
+ priv->status = 0;
+ regmap_write(priv->regmap, ASPEED_PECI_CMD, PECI_CMD_FIRE);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ err = wait_for_completion_interruptible_timeout(&priv->xfer_complete,
+ timeout);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ dev_dbg(priv->dev, "INT_STS : 0x%08x\n", priv->status);
+ regmap_read(priv->regmap, ASPEED_PECI_CMD, &peci_state);
+ dev_dbg(priv->dev, "PECI_STATE : 0x%lx\n",
+ FIELD_GET(PECI_CMD_STS_MASK, peci_state));
+
+ regmap_write(priv->regmap, ASPEED_PECI_CMD, 0);
+
+ if (err <= 0 || priv->status != PECI_INT_CMD_DONE) {
+ if (err < 0) { /* -ERESTARTSYS */
+ rc = (int)err;
+ goto err_irqrestore;
+ } else if (err == 0) {
+ dev_dbg(priv->dev, "Timeout waiting for a response!\n");
+ rc = -ETIMEDOUT;
+ goto err_irqrestore;
+ }
+
+ dev_dbg(priv->dev, "No valid response!\n");
+ rc = -EIO;
+ goto err_irqrestore;
+ }
+
+ /**
+ * Note that rx_len and rx_buf size can be an odd number.
+ * Byte handling is more efficient.
+ */
+ for (i = 0; i < msg->rx_len; i++) {
+ u8 byte_offset = i % 4;
+
+ if (byte_offset == 0) {
+ reg = i < 16 ? ASPEED_PECI_R_DATA0 + i % 16 :
+ ASPEED_PECI_R_DATA4 + i % 16;
+ regmap_read(priv->regmap, reg, &rx_data);
+ }
+
+ msg->rx_buf[i] = (u8)(rx_data >> (byte_offset << 3));
+ }
+
+ print_hex_dump_debug("RX : ", DUMP_PREFIX_NONE, 16, 1,
+ msg->rx_buf, msg->rx_len, true);
+
+ regmap_read(priv->regmap, ASPEED_PECI_CMD, &peci_state);
+ dev_dbg(priv->dev, "PECI_STATE : 0x%lx\n",
+ FIELD_GET(PECI_CMD_STS_MASK, peci_state));
+ dev_dbg(priv->dev, "------------------------\n");
+
+err_irqrestore:
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return rc;
+}
+
+static irqreturn_t aspeed_peci_irq_handler(int irq, void *arg)
+{
+ struct aspeed_peci *priv = arg;
+ u32 status_ack = 0;
+ u32 status;
+
+ spin_lock(&priv->lock);
+ regmap_read(priv->regmap, ASPEED_PECI_INT_STS, &status);
+ priv->status |= (status & PECI_INT_MASK);
+
+ /**
+ * In most cases, interrupt bits will be set one by one but also note
+ * that multiple interrupt bits could be set at the same time.
+ */
+ if (status & PECI_INT_TIMEOUT) {
+ dev_dbg(priv->dev, "PECI_INT_TIMEOUT\n");
+ status_ack |= PECI_INT_TIMEOUT;
+ }
+
+ if (status & PECI_INT_CONNECT) {
+ dev_dbg(priv->dev, "PECI_INT_CONNECT\n");
+ status_ack |= PECI_INT_CONNECT;
+ }
+
+ if (status & PECI_INT_W_FCS_BAD) {
+ dev_dbg(priv->dev, "PECI_INT_W_FCS_BAD\n");
+ status_ack |= PECI_INT_W_FCS_BAD;
+ }
+
+ if (status & PECI_INT_W_FCS_ABORT) {
+ dev_dbg(priv->dev, "PECI_INT_W_FCS_ABORT\n");
+ status_ack |= PECI_INT_W_FCS_ABORT;
+ }
+
+ /**
+ * All commands should be ended up with a PECI_INT_CMD_DONE bit set
+ * even in an error case.
+ */
+ if (status & PECI_INT_CMD_DONE) {
+ dev_dbg(priv->dev, "PECI_INT_CMD_DONE\n");
+ status_ack |= PECI_INT_CMD_DONE;
+ complete(&priv->xfer_complete);
+ }
+
+ regmap_write(priv->regmap, ASPEED_PECI_INT_STS, status_ack);
+ spin_unlock(&priv->lock);
+ return IRQ_HANDLED;
+}
+
+static int aspeed_peci_init_ctrl(struct aspeed_peci *priv)
+{
+ u32 msg_timing, addr_timing, rd_sampling_point;
+ u32 clk_freq, clk_divisor, clk_div_val = 0;
+ struct clk *clkin;
+ int ret;
+
+ clkin = devm_clk_get(priv->dev, NULL);
+ if (IS_ERR(clkin)) {
+ dev_err(priv->dev, "Failed to get clk source.\n");
+ return PTR_ERR(clkin);
+ }
+
+ ret = of_property_read_u32(priv->dev->of_node, "clock-frequency",
+ &clk_freq);
+ if (ret) {
+ dev_err(priv->dev,
+ "Could not read clock-frequency property.\n");
+ return ret;
+ }
+
+ clk_divisor = clk_get_rate(clkin) / clk_freq;
+ devm_clk_put(priv->dev, clkin);
+
+ while ((clk_divisor >> 1) && (clk_div_val < PECI_CLK_DIV_MAX))
+ clk_div_val++;
+
+ ret = of_property_read_u32(priv->dev->of_node, "msg-timing",
+ &msg_timing);
+ if (ret || msg_timing > PECI_MSG_TIMING_MAX) {
+ if (!ret)
+ dev_warn(priv->dev,
+ "Invalid msg-timing : %u, Use default : %u\n",
+ msg_timing, PECI_MSG_TIMING_DEFAULT);
+ msg_timing = PECI_MSG_TIMING_DEFAULT;
+ }
+
+ ret = of_property_read_u32(priv->dev->of_node, "addr-timing",
+ &addr_timing);
+ if (ret || addr_timing > PECI_ADDR_TIMING_MAX) {
+ if (!ret)
+ dev_warn(priv->dev,
+ "Invalid addr-timing : %u, Use default : %u\n",
+ addr_timing, PECI_ADDR_TIMING_DEFAULT);
+ addr_timing = PECI_ADDR_TIMING_DEFAULT;
+ }
+
+ ret = of_property_read_u32(priv->dev->of_node, "rd-sampling-point",
+ &rd_sampling_point);
+ if (ret || rd_sampling_point > PECI_RD_SAMPLING_POINT_MAX) {
+ if (!ret)
+ dev_warn(priv->dev,
+ "Invalid rd-sampling-point : %u. Use default : %u\n",
+ rd_sampling_point,
+ PECI_RD_SAMPLING_POINT_DEFAULT);
+ rd_sampling_point = PECI_RD_SAMPLING_POINT_DEFAULT;
+ }
+
+ ret = of_property_read_u32(priv->dev->of_node, "cmd-timeout-ms",
+ &priv->cmd_timeout_ms);
+ if (ret || priv->cmd_timeout_ms > PECI_CMD_TIMEOUT_MS_MAX ||
+ priv->cmd_timeout_ms == 0) {
+ if (!ret)
+ dev_warn(priv->dev,
+ "Invalid cmd-timeout-ms : %u. Use default : %u\n",
+ priv->cmd_timeout_ms,
+ PECI_CMD_TIMEOUT_MS_DEFAULT);
+ priv->cmd_timeout_ms = PECI_CMD_TIMEOUT_MS_DEFAULT;
+ }
+
+ regmap_write(priv->regmap, ASPEED_PECI_CTRL,
+ FIELD_PREP(PECI_CTRL_CLK_DIV_MASK, PECI_CLK_DIV_DEFAULT) |
+ PECI_CTRL_PECI_CLK_EN);
+
+ /**
+ * Timing negotiation period setting.
+ * The unit of the programmed value is 4 times of PECI clock period.
+ */
+ regmap_write(priv->regmap, ASPEED_PECI_TIMING,
+ FIELD_PREP(PECI_TIMING_MESSAGE_MASK, msg_timing) |
+ FIELD_PREP(PECI_TIMING_ADDRESS_MASK, addr_timing));
+
+ /* Clear interrupts */
+ regmap_write(priv->regmap, ASPEED_PECI_INT_STS, PECI_INT_MASK);
+
+ /* Enable interrupts */
+ regmap_write(priv->regmap, ASPEED_PECI_INT_CTRL, PECI_INT_MASK);
+
+ /* Read sampling point and clock speed setting */
+ regmap_write(priv->regmap, ASPEED_PECI_CTRL,
+ FIELD_PREP(PECI_CTRL_SAMPLING_MASK, rd_sampling_point) |
+ FIELD_PREP(PECI_CTRL_CLK_DIV_MASK, clk_div_val) |
+ PECI_CTRL_PECI_EN | PECI_CTRL_PECI_CLK_EN);
+
+ return 0;
+}
+
+static const struct regmap_config aspeed_peci_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = ASPEED_PECI_R_DATA7,
+ .val_format_endian = REGMAP_ENDIAN_LITTLE,
+ .fast_io = true,
+};
+
+static int aspeed_peci_xfer(struct peci_adapter *adapter,
+ struct peci_xfer_msg *msg)
+{
+ struct aspeed_peci *priv = peci_get_adapdata(adapter);
+
+ return aspeed_peci_xfer_native(priv, msg);
+}
+
+static int aspeed_peci_probe(struct platform_device *pdev)
+{
+ struct peci_adapter *adapter;
+ struct aspeed_peci *priv;
+ struct resource *res;
+ void __iomem *base;
+ u32 cmd_sts;
+ int ret;
+
+ adapter = peci_alloc_adapter(&pdev->dev, sizeof(*priv));
+ if (!adapter)
+ return -ENOMEM;
+
+ priv = peci_get_adapdata(adapter);
+ priv->adapter = adapter;
+ priv->dev = &pdev->dev;
+ dev_set_drvdata(&pdev->dev, priv);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base)) {
+ ret = PTR_ERR(base);
+ goto err_put_adapter_dev;
+ }
+
+ priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
+ &aspeed_peci_regmap_config);
+ if (IS_ERR(priv->regmap)) {
+ ret = PTR_ERR(priv->regmap);
+ goto err_put_adapter_dev;
+ }
+
+ /**
+ * We check that the regmap works on this very first access,
+ * but as this is an MMIO-backed regmap, subsequent regmap
+ * access is not going to fail and we skip error checks from
+ * this point.
+ */
+ ret = regmap_read(priv->regmap, ASPEED_PECI_CMD, &cmd_sts);
+ if (ret) {
+ ret = -EIO;
+ goto err_put_adapter_dev;
+ }
+
+ priv->irq = platform_get_irq(pdev, 0);
+ if (!priv->irq) {
+ ret = -ENODEV;
+ goto err_put_adapter_dev;
+ }
+
+ ret = devm_request_irq(&pdev->dev, priv->irq, aspeed_peci_irq_handler,
+ 0, "peci-aspeed-irq", priv);
+ if (ret)
+ goto err_put_adapter_dev;
+
+ init_completion(&priv->xfer_complete);
+ spin_lock_init(&priv->lock);
+
+ priv->adapter->owner = THIS_MODULE;
+ priv->adapter->dev.of_node = of_node_get(dev_of_node(priv->dev));
+ strlcpy(priv->adapter->name, pdev->name, sizeof(priv->adapter->name));
+ priv->adapter->xfer = aspeed_peci_xfer;
+
+ priv->rst = devm_reset_control_get(&pdev->dev, NULL);
+ if (IS_ERR(priv->rst)) {
+ dev_err(&pdev->dev,
+ "missing or invalid reset controller entry");
+ ret = PTR_ERR(priv->rst);
+ goto err_put_adapter_dev;
+ }
+ reset_control_deassert(priv->rst);
+
+ ret = aspeed_peci_init_ctrl(priv);
+ if (ret)
+ goto err_put_adapter_dev;
+
+ ret = peci_add_adapter(priv->adapter);
+ if (ret)
+ goto err_put_adapter_dev;
+
+ dev_info(&pdev->dev, "peci bus %d registered, irq %d\n",
+ priv->adapter->nr, priv->irq);
+
+ return 0;
+
+err_put_adapter_dev:
+ put_device(&adapter->dev);
+ return ret;
+}
+
+static int aspeed_peci_remove(struct platform_device *pdev)
+{
+ struct aspeed_peci *priv = dev_get_drvdata(&pdev->dev);
+
+ reset_control_assert(priv->rst);
+ peci_del_adapter(priv->adapter);
+ of_node_put(priv->adapter->dev.of_node);
+
+ return 0;
+}
+
+static const struct of_device_id aspeed_peci_of_table[] = {
+ { .compatible = "aspeed,ast2400-peci", },
+ { .compatible = "aspeed,ast2500-peci", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, aspeed_peci_of_table);
+
+static struct platform_driver aspeed_peci_driver = {
+ .probe = aspeed_peci_probe,
+ .remove = aspeed_peci_remove,
+ .driver = {
+ .name = "peci-aspeed",
+ .of_match_table = of_match_ptr(aspeed_peci_of_table),
+ },
+};
+module_platform_driver(aspeed_peci_driver);
+
+MODULE_AUTHOR("Ryan Chen <ryan_chen@aspeedtech.com>");
+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");
+MODULE_DESCRIPTION("ASPEED PECI driver");
+MODULE_LICENSE("GPL v2");
--
2.18.0
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.