* [PATCH v5] media: dvb-frontends: add Socionext MN88443x ISDB-S/T demodulator driver
From: kbuild test robot @ 2018-07-23 22:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180723085150.24266-1-suzuki.katsuhiro@socionext.com>
Hi Katsuhiro,
I love your patch! Yet something to improve:
[auto build test ERROR on linuxtv-media/master]
[also build test ERROR on v4.18-rc6 next-20180723]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Katsuhiro-Suzuki/media-dvb-frontends-add-Socionext-MN88443x-ISDB-S-T-demodulator-driver/20180724-050011
base: git://linuxtv.org/media_tree.git master
config: i386-randconfig-i1-201829 (attached as .config)
compiler: gcc-7 (Debian 7.3.0-16) 7.3.0
reproduce:
# save the attached .config to linux build tree
make ARCH=i386
All errors (new ones prefixed by >>):
>> drivers/media/dvb-frontends/mn88443x.c:15:10: fatal error: sc1501a.h: No such file or directory
#include "sc1501a.h"
^~~~~~~~~~~
compilation terminated.
vim +15 drivers/media/dvb-frontends/mn88443x.c
14
> 15 #include "sc1501a.h"
16
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
-------------- next part --------------
A non-text attachment was scrubbed...
Name: .config.gz
Type: application/gzip
Size: 27693 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180724/6fbfffe0/attachment-0001.gz>
^ permalink raw reply
* Re: [Qemu-devel] [PATCH 05/99] s390-ccw: force diag 308 subcode to unsigned long
From: Michael Roth @ 2018-07-23 22:14 UTC (permalink / raw)
To: qemu-devel; +Cc: qemu-stable, Cornelia Huck, Thomas Huth
In-Reply-To: <20180723201748.25573-6-mdroth@linux.vnet.ibm.com>
Quoting Michael Roth (2018-07-23 15:16:14)
> From: Cornelia Huck <cohuck@redhat.com>
>
> We currently pass an integer as the subcode parameter. However,
> the upper bits of the register containing the subcode need to
> be 0, which is not guaranteed unless we explicitly specify the
> subcode to be an unsigned long value.
>
> Fixes: d046c51dad3 ("pc-bios/s390-ccw: Get device address via diag 308/6")
> Cc: qemu-stable@nongnu.org
> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
> Tested-by: Thomas Huth <thuth@redhat.com>
> Signed-off-by: Thomas Huth <thuth@redhat.com>
> (cherry picked from commit 63d8b5ace31c1e1f3996fe4cd551d6d377594d5a)
> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Hi Cornelia,
Would you be able to do an s390 BIOS build for this one as well?
> ---
> pc-bios/s390-ccw/iplb.h | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/pc-bios/s390-ccw/iplb.h b/pc-bios/s390-ccw/iplb.h
> index 5357a36d51..ded20c834e 100644
> --- a/pc-bios/s390-ccw/iplb.h
> +++ b/pc-bios/s390-ccw/iplb.h
> @@ -101,10 +101,11 @@ static inline bool manage_iplb(IplParameterBlock *iplb, bool store)
> {
> register unsigned long addr asm("0") = (unsigned long) iplb;
> register unsigned long rc asm("1") = 0;
> + unsigned long subcode = store ? 6 : 5;
>
> asm volatile ("diag %0,%2,0x308\n"
> : "+d" (addr), "+d" (rc)
> - : "d" (store ? 6 : 5)
> + : "d" (subcode)
> : "memory", "cc");
> return rc == 0x01;
> }
> --
> 2.17.1
>
^ permalink raw reply
* Re: [PATCH 4.4 000/107] 4.4.144-stable review
From: Dan Rue @ 2018-07-23 22:14 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, torvalds, akpm, linux, shuah, patches,
ben.hutchings, lkft-triage, stable
In-Reply-To: <20180723122413.003644357@linuxfoundation.org>
On Mon, Jul 23, 2018 at 02:40:54PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.144 release.
> There are 107 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed Jul 25 12:23:53 UTC 2018.
> Anything received after that time might be too late.
Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.
Summary
------------------------------------------------------------------------
kernel: 4.4.144-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.4.y
git commit: 189cc8cb2eefebfa921f0ea038e3190d48559829
git describe: v4.4.143-108-g189cc8cb2eef
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.4-oe/build/v4.4.143-108-g189cc8cb2eef
No regressions (compared to build v4.4.142-32-g6c3754d773f4)
Ran 12126 total tests in the following environments and test suites.
Environments
--------------
- juno-r2 - arm64
- qemu_arm
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* boot
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-cve-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
Summary
------------------------------------------------------------------------
kernel: 4.4.144-rc1
git repo: https://git.linaro.org/lkft/arm64-stable-rc.git
git branch: 4.4.144-rc1-hikey-20180723-241
git commit: 74ff347a1f4bd5b91588a4025bfd29ae7a28329d
git describe: 4.4.144-rc1-hikey-20180723-241
Test details: https://qa-reports.linaro.org/lkft/linaro-hikey-stable-rc-4.4-oe/build/4.4.144-rc1-hikey-20180723-241
No regressions (compared to build 4.4.143-rc1-hikey-20180720-238)
Ran 2648 total tests in the following environments and test suites.
Environments
--------------
- hi6220-hikey - arm64
- qemu_arm64
Test Suites
-----------
* boot
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-cve-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-syscalls-tests
* ltp-securebits-tests
* ltp-timers-tests
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply
* Re: [PATCH v4 net-next 0/8] lan743x: Add features to lan743x driver
From: David Miller @ 2018-07-23 21:11 UTC (permalink / raw)
To: Bryan.Whitehead; +Cc: netdev, UNGLinuxDriver
In-Reply-To: <1532376993-20765-1-git-send-email-Bryan.Whitehead@microchip.com>
From: Bryan Whitehead <Bryan.Whitehead@microchip.com>
Date: Mon, 23 Jul 2018 16:16:25 -0400
> This patch series adds extra features to the lan743x driver.
Series applied, thank you.
^ permalink raw reply
* [PATCH] msm: add msm drm uapi header
From: Tanmay Shah @ 2018-07-23 22:14 UTC (permalink / raw)
To: dri-devel; +Cc: ryadav, seanpaul, manojavm, Tanmay Shah, chandanu
file derived from msm-next kernel uapi header.
Change-Id: Idcaa1ad6fc13e0c1d2d0a2e619121d2c5450f7da
---
Makefile.sources | 1 +
include/drm/msm_drm.h | 308 ++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 309 insertions(+)
create mode 100644 include/drm/msm_drm.h
diff --git a/Makefile.sources b/Makefile.sources
index 1f8372b..55290fe 100644
--- a/Makefile.sources
+++ b/Makefile.sources
@@ -25,6 +25,7 @@ LIBDRM_INCLUDE_H_FILES := \
include/drm/i915_drm.h \
include/drm/mach64_drm.h \
include/drm/mga_drm.h \
+ include/drm/msm_drm.h \
include/drm/nouveau_drm.h \
include/drm/qxl_drm.h \
include/drm/r128_drm.h \
diff --git a/include/drm/msm_drm.h b/include/drm/msm_drm.h
new file mode 100644
index 0000000..c06d0a5
--- /dev/null
+++ b/include/drm/msm_drm.h
@@ -0,0 +1,308 @@
+/*
+ * Copyright (C) 2013 Red Hat
+ * Author: Rob Clark <robdclark@gmail.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef __MSM_DRM_H__
+#define __MSM_DRM_H__
+
+#include "drm.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/* Please note that modifications to all structs defined here are
+ * subject to backwards-compatibility constraints:
+ * 1) Do not use pointers, use __u64 instead for 32 bit / 64 bit
+ * user/kernel compatibility
+ * 2) Keep fields aligned to their size
+ * 3) Because of how drm_ioctl() works, we can add new fields at
+ * the end of an ioctl if some care is taken: drm_ioctl() will
+ * zero out the new fields at the tail of the ioctl, so a zero
+ * value should have a backwards compatible meaning. And for
+ * output params, userspace won't see the newly added output
+ * fields.. so that has to be somehow ok.
+ */
+
+#define MSM_PIPE_NONE 0x00
+#define MSM_PIPE_2D0 0x01
+#define MSM_PIPE_2D1 0x02
+#define MSM_PIPE_3D0 0x10
+
+/* The pipe-id just uses the lower bits, so can be OR'd with flags in
+ * the upper 16 bits (which could be extended further, if needed, maybe
+ * we extend/overload the pipe-id some day to deal with multiple rings,
+ * but even then I don't think we need the full lower 16 bits).
+ */
+#define MSM_PIPE_ID_MASK 0xffff
+#define MSM_PIPE_ID(x) ((x) & MSM_PIPE_ID_MASK)
+#define MSM_PIPE_FLAGS(x) ((x) & ~MSM_PIPE_ID_MASK)
+
+/* timeouts are specified in clock-monotonic absolute times (to simplify
+ * restarting interrupted ioctls). The following struct is logically the
+ * same as 'struct timespec' but 32/64b ABI safe.
+ */
+struct drm_msm_timespec {
+ __s64 tv_sec; /* seconds */
+ __s64 tv_nsec; /* nanoseconds */
+};
+
+#define MSM_PARAM_GPU_ID 0x01
+#define MSM_PARAM_GMEM_SIZE 0x02
+#define MSM_PARAM_CHIP_ID 0x03
+#define MSM_PARAM_MAX_FREQ 0x04
+#define MSM_PARAM_TIMESTAMP 0x05
+#define MSM_PARAM_GMEM_BASE 0x06
+#define MSM_PARAM_NR_RINGS 0x07
+
+struct drm_msm_param {
+ __u32 pipe; /* in, MSM_PIPE_x */
+ __u32 param; /* in, MSM_PARAM_x */
+ __u64 value; /* out (get_param) or in (set_param) */
+};
+
+/*
+ * GEM buffers:
+ */
+
+#define MSM_BO_SCANOUT 0x00000001 /* scanout capable */
+#define MSM_BO_GPU_READONLY 0x00000002
+#define MSM_BO_CACHE_MASK 0x000f0000
+/* cache modes */
+#define MSM_BO_CACHED 0x00010000
+#define MSM_BO_WC 0x00020000
+#define MSM_BO_UNCACHED 0x00040000
+
+#define MSM_BO_FLAGS (MSM_BO_SCANOUT | \
+ MSM_BO_GPU_READONLY | \
+ MSM_BO_CACHED | \
+ MSM_BO_WC | \
+ MSM_BO_UNCACHED)
+
+struct drm_msm_gem_new {
+ __u64 size; /* in */
+ __u32 flags; /* in, mask of MSM_BO_x */
+ __u32 handle; /* out */
+};
+
+#define MSM_INFO_IOVA 0x01
+
+#define MSM_INFO_FLAGS (MSM_INFO_IOVA)
+
+struct drm_msm_gem_info {
+ __u32 handle; /* in */
+ __u32 flags; /* in - combination of MSM_INFO_* flags */
+ __u64 offset; /* out, mmap() offset or iova */
+};
+
+#define MSM_PREP_READ 0x01
+#define MSM_PREP_WRITE 0x02
+#define MSM_PREP_NOSYNC 0x04
+
+#define MSM_PREP_FLAGS (MSM_PREP_READ | MSM_PREP_WRITE | MSM_PREP_NOSYNC)
+
+struct drm_msm_gem_cpu_prep {
+ __u32 handle; /* in */
+ __u32 op; /* in, mask of MSM_PREP_x */
+ struct drm_msm_timespec timeout; /* in */
+};
+
+struct drm_msm_gem_cpu_fini {
+ __u32 handle; /* in */
+};
+
+/*
+ * Cmdstream Submission:
+ */
+
+/* The value written into the cmdstream is logically:
+ *
+ * ((relocbuf->gpuaddr + reloc_offset) << shift) | or
+ *
+ * When we have GPU's w/ >32bit ptrs, it should be possible to deal
+ * with this by emit'ing two reloc entries with appropriate shift
+ * values. Or a new MSM_SUBMIT_CMD_x type would also be an option.
+ *
+ * NOTE that reloc's must be sorted by order of increasing submit_offset,
+ * otherwise EINVAL.
+ */
+struct drm_msm_gem_submit_reloc {
+ __u32 submit_offset; /* in, offset from submit_bo */
+ __u32 or; /* in, value OR'd with result */
+ __s32 shift; /* in, amount of left shift (can be negative) */
+ __u32 reloc_idx; /* in, index of reloc_bo buffer */
+ __u64 reloc_offset; /* in, offset from start of reloc_bo */
+};
+
+/* submit-types:
+ * BUF - this cmd buffer is executed normally.
+ * IB_TARGET_BUF - this cmd buffer is an IB target. Reloc's are
+ * processed normally, but the kernel does not setup an IB to
+ * this buffer in the first-level ringbuffer
+ * CTX_RESTORE_BUF - only executed if there has been a GPU context
+ * switch since the last SUBMIT ioctl
+ */
+#define MSM_SUBMIT_CMD_BUF 0x0001
+#define MSM_SUBMIT_CMD_IB_TARGET_BUF 0x0002
+#define MSM_SUBMIT_CMD_CTX_RESTORE_BUF 0x0003
+struct drm_msm_gem_submit_cmd {
+ __u32 type; /* in, one of MSM_SUBMIT_CMD_x */
+ __u32 submit_idx; /* in, index of submit_bo cmdstream buffer */
+ __u32 submit_offset; /* in, offset into submit_bo */
+ __u32 size; /* in, cmdstream size */
+ __u32 pad;
+ __u32 nr_relocs; /* in, number of submit_reloc's */
+ __u64 relocs; /* in, ptr to array of submit_reloc's */
+};
+
+/* Each buffer referenced elsewhere in the cmdstream submit (ie. the
+ * cmdstream buffer(s) themselves or reloc entries) has one (and only
+ * one) entry in the submit->bos[] table.
+ *
+ * As a optimization, the current buffer (gpu virtual address) can be
+ * passed back through the 'presumed' field. If on a subsequent reloc,
+ * userspace passes back a 'presumed' address that is still valid,
+ * then patching the cmdstream for this entry is skipped. This can
+ * avoid kernel needing to map/access the cmdstream bo in the common
+ * case.
+ */
+#define MSM_SUBMIT_BO_READ 0x0001
+#define MSM_SUBMIT_BO_WRITE 0x0002
+
+#define MSM_SUBMIT_BO_FLAGS (MSM_SUBMIT_BO_READ | MSM_SUBMIT_BO_WRITE)
+
+struct drm_msm_gem_submit_bo {
+ __u32 flags; /* in, mask of MSM_SUBMIT_BO_x */
+ __u32 handle; /* in, GEM handle */
+ __u64 presumed; /* in/out, presumed buffer address */
+};
+
+/* Valid submit ioctl flags: */
+#define MSM_SUBMIT_NO_IMPLICIT 0x80000000 /* disable implicit sync */
+#define MSM_SUBMIT_FENCE_FD_IN 0x40000000 /* enable input fence_fd */
+#define MSM_SUBMIT_FENCE_FD_OUT 0x20000000 /* enable output fence_fd */
+#define MSM_SUBMIT_SUDO 0x10000000 /* run submitted cmds from RB */
+#define MSM_SUBMIT_FLAGS ( \
+ MSM_SUBMIT_NO_IMPLICIT | \
+ MSM_SUBMIT_FENCE_FD_IN | \
+ MSM_SUBMIT_FENCE_FD_OUT | \
+ MSM_SUBMIT_SUDO | \
+ 0)
+
+/* Each cmdstream submit consists of a table of buffers involved, and
+ * one or more cmdstream buffers. This allows for conditional execution
+ * (context-restore), and IB buffers needed for per tile/bin draw cmds.
+ */
+struct drm_msm_gem_submit {
+ __u32 flags; /* MSM_PIPE_x | MSM_SUBMIT_x */
+ __u32 fence; /* out */
+ __u32 nr_bos; /* in, number of submit_bo's */
+ __u32 nr_cmds; /* in, number of submit_cmd's */
+ __u64 bos; /* in, ptr to array of submit_bo's */
+ __u64 cmds; /* in, ptr to array of submit_cmd's */
+ __s32 fence_fd; /* in/out fence fd (see MSM_SUBMIT_FENCE_FD_IN/OUT) */
+ __u32 queueid; /* in, submitqueue id */
+};
+
+/* The normal way to synchronize with the GPU is just to CPU_PREP on
+ * a buffer if you need to access it from the CPU (other cmdstream
+ * submission from same or other contexts, PAGE_FLIP ioctl, etc, all
+ * handle the required synchronization under the hood). This ioctl
+ * mainly just exists as a way to implement the gallium pipe_fence
+ * APIs without requiring a dummy bo to synchronize on.
+ */
+struct drm_msm_wait_fence {
+ __u32 fence; /* in */
+ __u32 pad;
+ struct drm_msm_timespec timeout; /* in */
+ __u32 queueid; /* in, submitqueue id */
+};
+
+/* madvise provides a way to tell the kernel in case a buffers contents
+ * can be discarded under memory pressure, which is useful for userspace
+ * bo cache where we want to optimistically hold on to buffer allocate
+ * and potential mmap, but allow the pages to be discarded under memory
+ * pressure.
+ *
+ * Typical usage would involve madvise(DONTNEED) when buffer enters BO
+ * cache, and madvise(WILLNEED) if trying to recycle buffer from BO cache.
+ * In the WILLNEED case, 'retained' indicates to userspace whether the
+ * backing pages still exist.
+ */
+#define MSM_MADV_WILLNEED 0 /* backing pages are needed, status returned in 'retained' */
+#define MSM_MADV_DONTNEED 1 /* backing pages not needed */
+#define __MSM_MADV_PURGED 2 /* internal state */
+
+struct drm_msm_gem_madvise {
+ __u32 handle; /* in, GEM handle */
+ __u32 madv; /* in, MSM_MADV_x */
+ __u32 retained; /* out, whether backing store still exists */
+};
+
+/*
+ * Draw queues allow the user to set specific submission parameter. Command
+ * submissions specify a specific submitqueue to use. ID 0 is reserved for
+ * backwards compatibility as a "default" submitqueue
+ */
+
+#define MSM_SUBMITQUEUE_FLAGS (0)
+
+struct drm_msm_submitqueue {
+ __u32 flags; /* in, MSM_SUBMITQUEUE_x */
+ __u32 prio; /* in, Priority level */
+ __u32 id; /* out, identifier */
+};
+
+#define DRM_MSM_GET_PARAM 0x00
+/* placeholder:
+#define DRM_MSM_SET_PARAM 0x01
+ */
+#define DRM_MSM_GEM_NEW 0x02
+#define DRM_MSM_GEM_INFO 0x03
+#define DRM_MSM_GEM_CPU_PREP 0x04
+#define DRM_MSM_GEM_CPU_FINI 0x05
+#define DRM_MSM_GEM_SUBMIT 0x06
+#define DRM_MSM_WAIT_FENCE 0x07
+#define DRM_MSM_GEM_MADVISE 0x08
+/* placeholder:
+#define DRM_MSM_GEM_SVM_NEW 0x09
+ */
+#define DRM_MSM_SUBMITQUEUE_NEW 0x0A
+#define DRM_MSM_SUBMITQUEUE_CLOSE 0x0B
+
+#define DRM_IOCTL_MSM_GET_PARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GET_PARAM, struct drm_msm_param)
+#define DRM_IOCTL_MSM_GEM_NEW DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GEM_NEW, struct drm_msm_gem_new)
+#define DRM_IOCTL_MSM_GEM_INFO DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GEM_INFO, struct drm_msm_gem_info)
+#define DRM_IOCTL_MSM_GEM_CPU_PREP DRM_IOW (DRM_COMMAND_BASE + DRM_MSM_GEM_CPU_PREP, struct drm_msm_gem_cpu_prep)
+#define DRM_IOCTL_MSM_GEM_CPU_FINI DRM_IOW (DRM_COMMAND_BASE + DRM_MSM_GEM_CPU_FINI, struct drm_msm_gem_cpu_fini)
+#define DRM_IOCTL_MSM_GEM_SUBMIT DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GEM_SUBMIT, struct drm_msm_gem_submit)
+#define DRM_IOCTL_MSM_WAIT_FENCE DRM_IOW (DRM_COMMAND_BASE + DRM_MSM_WAIT_FENCE, struct drm_msm_wait_fence)
+#define DRM_IOCTL_MSM_GEM_MADVISE DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GEM_MADVISE, struct drm_msm_gem_madvise)
+#define DRM_IOCTL_MSM_SUBMITQUEUE_NEW DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_SUBMITQUEUE_NEW, struct drm_msm_submitqueue)
+#define DRM_IOCTL_MSM_SUBMITQUEUE_CLOSE DRM_IOW (DRM_COMMAND_BASE + DRM_MSM_SUBMITQUEUE_CLOSE, __u32)
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __MSM_DRM_H__ */
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related
* [ovmf baseline-only test] 74998: tolerable FAIL
From: Platform Team regression test user @ 2018-07-23 22:13 UTC (permalink / raw)
To: xen-devel, osstest-admin
This run is configured for baseline tests only.
flight 74998 ovmf real [real]
http://osstest.xensource.com/osstest/logs/74998/
Failures :-/ but no regressions.
Tests which did not succeed, but are not blocking:
test-amd64-amd64-xl-qemuu-ovmf-amd64 10 debian-hvm-install fail like 74996
test-amd64-i386-xl-qemuu-ovmf-amd64 10 debian-hvm-install fail like 74996
version targeted for testing:
ovmf 549ae85ce1b00228c3abcf6a9e4022c4f4fba5ed
baseline version:
ovmf d9e206d4bf9124fe526baaa0ec56a7d2316ca6b3
Last test of basis 74996 2018-07-23 05:49:46 Z 0 days
Testing same since 74998 2018-07-23 20:20:13 Z 0 days 1 attempts
------------------------------------------------------------
People who touched revisions under test:
Star Zeng <star.zeng@intel.com>
Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Yonghong Zhu <yonghong.zhu@intel.com>
Yunhua Feng <yunhuax.feng@intel.com>
jobs:
build-amd64-xsm pass
build-i386-xsm pass
build-amd64 pass
build-i386 pass
build-amd64-libvirt pass
build-i386-libvirt pass
build-amd64-pvops pass
build-i386-pvops pass
test-amd64-amd64-xl-qemuu-ovmf-amd64 fail
test-amd64-i386-xl-qemuu-ovmf-amd64 fail
------------------------------------------------------------
sg-report-flight on osstest.xs.citrite.net
logs: /home/osstest/logs
images: /home/osstest/images
Logs, config files, etc. are available at
http://osstest.xensource.com/osstest/logs
Test harness code can be found at
http://xenbits.xensource.com/gitweb?p=osstest.git;a=summary
Push not applicable.
------------------------------------------------------------
commit 549ae85ce1b00228c3abcf6a9e4022c4f4fba5ed
Author: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Date: Tue Jul 3 18:00:35 2018 +0800
BaseTools/AutoGen: Update header file for MM modules.
This patch corrects the Module Type Header file for Management Mode(MM)
as specified in PI v1.6 Specification. Also, it updates parameter for
auto generated template functions from EFI_SMM_SYSTEM_TABLE2 to
EFI_MM_SYSTEM_TABLE.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
commit 1794b98f72fb087f012602c4d1450762dd62906d
Author: Yonghong Zhu <yonghong.zhu@intel.com>
Date: Fri Jul 13 11:28:33 2018 +0800
BaseTools: ElfConvert Tool update VerboseMsg to same with the comment
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=994
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
commit 10944bc390f52fcd418670fe0171da1d4f3b05cc
Author: Star Zeng <star.zeng@intel.com>
Date: Fri Jul 13 16:00:15 2018 +0800
MdeModulePkg CapsuleApp: Use EFI_UNSUPPORTED for incorrect Argc case
Align code to use EFI_UNSUPPORTED for all incorrect Argc cases.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
commit d9c640b9282dd3a6ee45bc5886e7d5b0e586c95d
Author: Star Zeng <star.zeng@intel.com>
Date: Fri Jul 13 15:50:16 2018 +0800
MdeModulePkg CapsuleApp: Check capsule header before using its Flags
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
commit 95dd7a6ecd2358208a9f82bb948cafddebd78519
Author: Star Zeng <star.zeng@intel.com>
Date: Fri Jul 13 15:28:21 2018 +0800
MdeModulePkg CapsuleApp: Show clear message when option is unrecognized
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
commit 81e1276adfe88cfbbc39618b52429cf49ef3cbce
Author: Star Zeng <star.zeng@intel.com>
Date: Fri Jul 13 15:16:02 2018 +0800
MdeModulePkg CapsuleApp: Do not parse bits in CapsuleFlags of ESRT
According to UEFI spec, only bits 0-15 of CapsuleFlags are
meaningful and CapsuleGuid specific, CAPSULE_FLAGS_PERSIST_ACROSS_RESET
CAPSULE_FLAGS_POPULATE_SYSTEM_TABLE/CAPSULE_FLAGS_INITIATE_RESET
defined in UEFI spec are in bits 16-31, they should not be parsed in
CapsuleFlags of ESRT.
CapsuleFlags
The capsule flags field contains the CapsuleGuid flags (bits 0-15)
as defined in the EFI_CAPSULE_HEADER that will be set in the capsule
header.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
commit d4d9116775763a7ce4bff894ea06ecef4b17e441
Author: Star Zeng <star.zeng@intel.com>
Date: Fri Jul 13 15:04:16 2018 +0800
MdeModulePkg CapsuleApp: Fix memory leak in DumpFmpImage()
Image buffer should be freed after using.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
commit 5410502f6d7e4bb786ccd6c30c8662ed217bcaba
Author: Star Zeng <star.zeng@intel.com>
Date: Wed Jul 11 16:35:02 2018 +0800
MdeModulePkg CapsuleApp: Check Arg count for -P GET option
Also add help info for CapsuleApp -P GET option.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
commit a10def91653163dbc6a38a609a87b370e9035654
Author: Yunhua Feng <yunhuax.feng@intel.com>
Date: Fri Jul 13 17:05:20 2018 +0800
BaseTools: enable FixedAtBuild (VOID*) PCD use in the [DEPEX] section
V3: Add some invalid type and datum check
V2: limit the PCD used in the [Depex] section should be used in the module
The PCD item used in INF [Depex] section must be defined as FixedAtBuild
type and VOID* datum type, and the size of the PCD must be 16 bytes.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=443
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply
* [PATCH] dt-bindings: remove 'interrupt-parent' from bindings
From: Rob Herring @ 2018-07-23 22:13 UTC (permalink / raw)
To: linux-kernel, devicetree; +Cc: Mark Rutland
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 254977 bytes --]
'interrupt-parent' is often documented as part of define bindings, but
it is really outside the scope of a device binding. It's never required
in a given node as it is often inherited from a parent node. Or it can
be implicit if a parent node is an 'interrupt-controller' node. So
remove it from all the binding files.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
.../arm/freescale/fsl,vf610-mscm-ir.txt | 3 ---
.../devicetree/bindings/arm/omap/crossbar.txt | 1 -
.../devicetree/bindings/arm/samsung/pmu.txt | 3 ---
.../devicetree/bindings/ata/fsl-sata.txt | 1 -
.../devicetree/bindings/ata/pata-arasan.txt | 2 --
.../devicetree/bindings/board/fsl-board.txt | 1 -
.../devicetree/bindings/bus/brcm,gisb-arb.txt | 2 --
.../devicetree/bindings/clock/at91-clock.txt | 7 -------
.../cpufreq/brcm,stb-avs-cpu-freq.txt | 2 --
.../devicetree/bindings/crypto/amd-ccp.txt | 2 --
.../bindings/crypto/arm-cryptocell.txt | 2 --
.../devicetree/bindings/crypto/fsl-sec2.txt | 5 -----
.../devicetree/bindings/crypto/fsl-sec4.txt | 21 -------------------
.../bindings/crypto/picochip-spacc.txt | 2 --
.../bindings/display/bridge/analogix_dp.txt | 2 --
.../bindings/display/bridge/anx7814.txt | 2 --
.../megachips-stdpxxxx-ge-b850v3-fw.txt | 2 --
.../bindings/display/bridge/sii902x.txt | 4 ++--
.../bindings/display/bridge/sii9234.txt | 2 +-
.../bindings/display/bridge/sil-sii8620.txt | 2 +-
.../bindings/display/exynos/exynos7-decon.txt | 3 ---
.../bindings/display/exynos/exynos_dp.txt | 2 --
.../bindings/display/exynos/samsung-fimd.txt | 3 ---
.../devicetree/bindings/display/ht16k33.txt | 2 --
.../devicetree/bindings/display/msm/dsi.txt | 2 --
.../devicetree/bindings/display/msm/edp.txt | 4 ----
.../devicetree/bindings/display/msm/mdp5.txt | 2 --
.../bindings/display/renesas,du.txt | 1 -
.../devicetree/bindings/display/sm501fb.txt | 2 --
.../bindings/display/tilcdc/tilcdc.txt | 2 --
.../devicetree/bindings/dma/jz4780-dma.txt | 1 -
.../bindings/dma/nvidia,tegra210-adma.txt | 1 -
.../bindings/dma/snps,dw-axi-dmac.txt | 2 --
.../devicetree/bindings/dma/snps-dma.txt | 2 --
.../devicetree/bindings/dma/ti-edma.txt | 1 -
.../bindings/dma/xilinx/zynqmp_dma.txt | 1 -
.../bindings/extcon/extcon-rt8973a.txt | 2 --
.../bindings/extcon/extcon-sm5502.txt | 2 --
.../devicetree/bindings/gpio/8xxx_gpio.txt | 2 --
.../bindings/gpio/abilis,tb10x-gpio.txt | 1 -
.../bindings/gpio/brcm,brcmstb-gpio.txt | 3 ---
.../devicetree/bindings/gpio/gpio-adnp.txt | 1 -
.../devicetree/bindings/gpio/gpio-aspeed.txt | 1 -
.../devicetree/bindings/gpio/gpio-ath79.txt | 1 -
.../devicetree/bindings/gpio/gpio-davinci.txt | 2 --
.../devicetree/bindings/gpio/gpio-max732x.txt | 1 -
.../devicetree/bindings/gpio/gpio-pcf857x.txt | 1 -
.../bindings/gpio/gpio-uniphier.txt | 1 -
.../bindings/gpio/gpio-xgene-sb.txt | 1 -
.../devicetree/bindings/gpio/gpio-xilinx.txt | 2 --
.../devicetree/bindings/gpio/gpio-xlp.txt | 1 -
.../devicetree/bindings/gpio/gpio-zynq.txt | 1 -
.../bindings/gpio/nintendo,hollywood-gpio.txt | 1 -
.../bindings/gpio/renesas,gpio-rcar.txt | 1 -
.../bindings/gpio/snps-dwapb-gpio.txt | 1 -
.../devicetree/bindings/hsi/omap-ssi.txt | 1 -
.../devicetree/bindings/i2c/i2c-aspeed.txt | 3 ---
.../devicetree/bindings/i2c/i2c-brcmstb.txt | 2 --
.../devicetree/bindings/i2c/i2c-imx-lpi2c.txt | 1 -
.../devicetree/bindings/i2c/i2c-jz4780.txt | 4 ----
.../devicetree/bindings/i2c/i2c-mpc.txt | 2 --
.../bindings/i2c/i2c-mux-pca954x.txt | 2 --
.../bindings/i2c/i2c-pca-platform.txt | 2 --
.../devicetree/bindings/i2c/i2c-pnx.txt | 2 --
.../devicetree/bindings/i2c/i2c-pxa.txt | 3 ---
.../devicetree/bindings/iio/accel/adxl345.txt | 2 --
.../devicetree/bindings/iio/accel/bma180.txt | 2 --
.../devicetree/bindings/iio/accel/mma8452.txt | 2 --
.../devicetree/bindings/iio/adc/cpcap-adc.txt | 1 -
.../bindings/iio/adc/fsl,imx25-gcq.txt | 1 -
.../bindings/iio/adc/max1027-adc.txt | 2 --
.../bindings/iio/adc/st,stm32-adc.txt | 1 -
.../bindings/iio/adc/xilinx-xadc.txt | 1 -
.../bindings/iio/chemical/atlas,ec-sm.txt | 1 -
.../bindings/iio/chemical/atlas,orp-sm.txt | 1 -
.../bindings/iio/chemical/atlas,ph-sm.txt | 1 -
.../iio/gyroscope/invensense,mpu3050.txt | 1 -
.../bindings/iio/health/afe4403.txt | 1 -
.../bindings/iio/health/afe4404.txt | 1 -
.../bindings/iio/health/max30100.txt | 1 -
.../bindings/iio/health/max30102.txt | 1 -
.../bindings/iio/humidity/hts221.txt | 1 -
.../devicetree/bindings/iio/imu/bmi160.txt | 1 -
.../bindings/iio/imu/inv_mpu6050.txt | 1 -
.../bindings/iio/imu/st_lsm6dsx.txt | 1 -
.../bindings/iio/light/apds9300.txt | 1 -
.../bindings/iio/light/apds9960.txt | 1 -
.../bindings/iio/light/isl29018.txt | 1 -
.../devicetree/bindings/iio/light/opt3001.txt | 1 -
.../devicetree/bindings/iio/light/tsl2583.txt | 1 -
.../devicetree/bindings/iio/light/uvis25.txt | 1 -
.../bindings/iio/magnetometer/bmc150_magn.txt | 1 -
.../bindings/iio/pressure/bmp085.txt | 1 -
.../bindings/iio/pressure/zpa2326.txt | 2 --
.../bindings/iio/proximity/as3935.txt | 1 -
.../bindings/iio/proximity/sx9500.txt | 1 -
.../devicetree/bindings/iio/sensorhub.txt | 1 -
.../bindings/iio/temperature/tmp007.txt | 2 --
.../infiniband/hisilicon-hns-roce.txt | 1 -
.../bindings/input/cypress,cyapa.txt | 2 --
.../bindings/input/cypress,tm2-touchkey.txt | 2 --
.../devicetree/bindings/input/e3x0-button.txt | 2 --
.../devicetree/bindings/input/elan_i2c.txt | 2 --
.../devicetree/bindings/input/elants_i2c.txt | 2 --
.../bindings/input/hid-over-i2c.txt | 1 -
.../bindings/input/raydium_i2c_ts.txt | 1 -
.../bindings/input/rmi4/rmi_i2c.txt | 1 -
.../bindings/input/rmi4/rmi_spi.txt | 1 -
.../bindings/input/ti,palmas-pwrbutton.txt | 1 -
.../bindings/input/touchscreen/ad7879.txt | 1 -
.../bindings/input/touchscreen/ads7846.txt | 1 -
.../bindings/input/touchscreen/ar1021.txt | 1 -
.../input/touchscreen/chipone_icn8318.txt | 2 --
.../input/touchscreen/colibri-vf50-ts.txt | 1 -
.../bindings/input/touchscreen/cyttsp.txt | 2 --
.../bindings/input/touchscreen/edt-ft5x06.txt | 2 --
.../bindings/input/touchscreen/egalax-ts.txt | 1 -
.../bindings/input/touchscreen/ektf2127.txt | 2 --
.../bindings/input/touchscreen/exc3000.txt | 1 -
.../input/touchscreen/fsl-mx25-tcq.txt | 1 -
.../bindings/input/touchscreen/goodix.txt | 1 -
.../bindings/input/touchscreen/hideep.txt | 1 -
.../input/touchscreen/max11801-ts.txt | 1 -
.../input/touchscreen/melfas_mip4.txt | 1 -
.../input/touchscreen/samsung,s6sy761.txt | 2 --
.../input/touchscreen/silead_gsl1680.txt | 2 --
.../bindings/input/touchscreen/sis_i2c.txt | 2 --
.../bindings/input/touchscreen/st,stmfts.txt | 2 --
.../bindings/input/touchscreen/sx8654.txt | 1 -
.../bindings/input/touchscreen/tsc2007.txt | 2 --
.../bindings/input/touchscreen/zet6223.txt | 2 --
.../abilis,tb10x-ictl.txt | 1 -
.../interrupt-controller/al,alpine-msix.txt | 1 -
.../allwinner,sunxi-nmi.txt | 1 -
.../amlogic,meson-gpio-intc.txt | 3 ---
.../interrupt-controller/atmel,aic.txt | 2 --
.../brcm,bcm2835-armctrl-ic.txt | 2 --
.../brcm,bcm3380-l2-intc.txt | 2 --
.../brcm,bcm6345-l1-intc.txt | 2 --
.../brcm,bcm7038-l1-intc.txt | 2 --
.../brcm,bcm7120-l2-intc.txt | 2 --
.../interrupt-controller/brcm,l2-intc.txt | 2 --
.../interrupt-controller/fsl,ls-scfg-msi.txt | 3 ---
.../hisilicon,mbigen-v2.txt | 2 --
.../interrupt-controller/ingenic,intc.txt | 1 -
.../marvell,odmi-controller.txt | 2 --
.../interrupt-controller/mediatek,cirq.txt | 2 --
.../interrupt-controller/mediatek,sysirq.txt | 2 --
.../mscc,ocelot-icpu-intr.txt | 1 -
.../nvidia,tegra20-ictlr.txt | 2 --
.../interrupt-controller/nxp,lpc3220-mic.txt | 2 --
.../qca,ath79-misc-intc.txt | 1 -
.../interrupt-controller/qcom,pdc.txt | 6 ------
.../samsung,exynos4210-combiner.txt | 2 --
.../sigma,smp8642-intc.txt | 1 -
.../snps,archs-idu-intc.txt | 1 -
.../interrupt-controller/snps,dw-apb-ictl.txt | 1 -
.../socionext,synquacer-exiu.txt | 1 -
.../st,spear3xx-shirq.txt | 4 ----
.../technologic,ts4800.txt | 2 --
.../ti,c64x+megamod-pic.txt | 1 -
.../interrupt-controller/ti,omap4-wugen-mpu | 2 --
.../bindings/iommu/samsung,sysmmu.txt | 1 -
.../bindings/mailbox/altera-mailbox.txt | 1 -
.../bindings/media/i2c/tc358743.txt | 2 +-
.../bindings/media/sh_mobile_ceu.txt | 1 -
.../devicetree/bindings/mfd/ac100.txt | 4 ----
.../devicetree/bindings/mfd/altera-a10sr.txt | 1 -
.../devicetree/bindings/mfd/arizona.txt | 1 -
.../devicetree/bindings/mfd/axp20x.txt | 1 -
.../devicetree/bindings/mfd/bd9571mwv.txt | 1 -
.../devicetree/bindings/mfd/bfticu.txt | 1 -
.../devicetree/bindings/mfd/da9055.txt | 2 --
.../devicetree/bindings/mfd/da9062.txt | 2 --
.../devicetree/bindings/mfd/da9063.txt | 2 --
.../devicetree/bindings/mfd/da9150.txt | 2 --
.../devicetree/bindings/mfd/max14577.txt | 1 -
.../devicetree/bindings/mfd/max77686.txt | 1 -
.../devicetree/bindings/mfd/max77693.txt | 1 -
.../devicetree/bindings/mfd/max77802.txt | 1 -
.../devicetree/bindings/mfd/max8998.txt | 2 --
.../bindings/mfd/motorola-cpcap.txt | 1 -
.../devicetree/bindings/mfd/palmas.txt | 1 -
.../devicetree/bindings/mfd/retu.txt | 1 -
.../devicetree/bindings/mfd/rk808.txt | 1 -
.../bindings/mfd/samsung,sec-core.txt | 2 --
.../devicetree/bindings/mfd/stmpe.txt | 1 -
.../devicetree/bindings/mfd/tc3589x.txt | 1 -
.../devicetree/bindings/mfd/tps65086.txt | 1 -
.../devicetree/bindings/mfd/tps65912.txt | 1 -
.../devicetree/bindings/mfd/twl-familly.txt | 1 -
.../devicetree/bindings/mfd/twl6040.txt | 1 -
.../devicetree/bindings/mfd/wm831x.txt | 1 -
.../devicetree/bindings/mips/cavium/cib.txt | 2 --
.../devicetree/bindings/mmc/arasan,sdhci.txt | 2 --
.../devicetree/bindings/mmc/fsl-esdhc.txt | 1 -
.../devicetree/bindings/mmc/mmc-spi-slot.txt | 2 --
.../devicetree/bindings/mtd/brcm,brcmnand.txt | 1 -
.../devicetree/bindings/mtd/gpmc-nand.txt | 1 -
.../devicetree/bindings/mtd/spear_smi.txt | 2 --
.../devicetree/bindings/net/amd-xgbe.txt | 2 --
.../devicetree/bindings/net/btusb.txt | 1 -
.../bindings/net/can/holt_hi311x.txt | 1 -
.../bindings/net/can/microchip,mcp251x.txt | 1 -
.../bindings/net/can/xilinx_can.txt | 1 -
.../devicetree/bindings/net/cpsw.txt | 1 -
.../bindings/net/davicom-dm9000.txt | 1 -
.../devicetree/bindings/net/dsa/marvell.txt | 1 -
.../bindings/net/hisilicon-hns-dsaf.txt | 1 -
.../devicetree/bindings/net/ibm,emac.txt | 1 -
.../bindings/net/marvell-bt-8xxx.txt | 1 -
.../bindings/net/mediatek,mt7620-gsw.txt | 2 --
.../devicetree/bindings/net/mediatek-net.txt | 3 ---
.../bindings/net/microchip,enc28j60.txt | 3 ---
.../devicetree/bindings/net/nfc/nxp-nci.txt | 1 -
.../devicetree/bindings/net/nfc/pn533-i2c.txt | 1 -
.../devicetree/bindings/net/nfc/pn544.txt | 1 -
.../devicetree/bindings/net/nfc/s3fwrn5.txt | 1 -
.../bindings/net/nfc/st-nci-i2c.txt | 1 -
.../bindings/net/nfc/st-nci-spi.txt | 1 -
.../devicetree/bindings/net/nfc/st21nfca.txt | 2 --
.../devicetree/bindings/net/nfc/st95hf.txt | 3 ---
.../devicetree/bindings/net/nfc/trf7970a.txt | 1 -
Documentation/devicetree/bindings/net/phy.txt | 2 --
.../devicetree/bindings/net/qca,qca7000.txt | 1 -
.../bindings/net/ralink,rt2880-net.txt | 2 --
.../bindings/net/ralink,rt3050-esw.txt | 2 --
.../devicetree/bindings/net/renesas,ravb.txt | 2 --
.../devicetree/bindings/net/samsung-sxgbe.txt | 2 --
.../devicetree/bindings/net/sh_eth.txt | 2 --
.../bindings/net/snps,dwc-qos-ethernet.txt | 2 --
.../devicetree/bindings/net/stmmac.txt | 2 --
.../net/wireless/brcm,bcm43xx-fmac.txt | 2 --
.../bindings/net/wireless/marvell-8xxx.txt | 1 -
.../bindings/net/wireless/ti,wl1251.txt | 2 --
.../bindings/net/wireless/ti,wlcore,spi.txt | 4 +---
.../bindings/net/wireless/ti,wlcore.txt | 2 --
.../bindings/pci/altera-pcie-msi.txt | 1 -
.../devicetree/bindings/pci/altera-pcie.txt | 1 -
.../bindings/pci/brcm,iproc-pcie.txt | 1 -
.../bindings/pci/faraday,ftpci100.txt | 1 -
.../devicetree/bindings/pci/mobiveil-pcie.txt | 3 ---
.../devicetree/bindings/pci/pci-keystone.txt | 3 ---
.../bindings/pci/ralink,rt3883-pci.txt | 3 ---
.../bindings/pinctrl/pinctrl-mt7622.txt | 2 --
.../bindings/pinctrl/pinctrl-sx150x.txt | 2 --
.../bindings/pinctrl/samsung-pinctrl.txt | 6 ------
.../bindings/pinctrl/st,stm32-pinctrl.txt | 2 --
.../power/supply/act8945a-charger.txt | 2 --
.../bindings/power/supply/bq24257.txt | 2 --
.../bindings/power/supply/lp8727_charger.txt | 1 -
.../bindings/power/supply/maxim,max14656.txt | 1 -
.../bindings/power/supply/rt9455_charger.txt | 2 --
.../bindings/power/supply/sbs_sbs-charger.txt | 2 --
.../bindings/powerpc/4xx/akebono.txt | 2 --
.../devicetree/bindings/powerpc/4xx/hsta.txt | 1 -
.../bindings/powerpc/4xx/ppc440spe-adma.txt | 2 --
.../devicetree/bindings/powerpc/fsl/dcsr.txt | 7 -------
.../devicetree/bindings/powerpc/fsl/diu.txt | 2 --
.../devicetree/bindings/powerpc/fsl/dma.txt | 4 ----
.../devicetree/bindings/powerpc/fsl/ecm.txt | 4 ----
.../devicetree/bindings/powerpc/fsl/mcm.txt | 4 ----
.../bindings/powerpc/fsl/mpc5121-psc.txt | 4 ----
.../bindings/powerpc/fsl/msi-pic.txt | 5 -----
.../devicetree/bindings/powerpc/fsl/pamu.txt | 2 --
.../bindings/powerpc/nintendo/wii.txt | 1 -
.../bindings/regulator/max8997-regulator.txt | 2 --
.../bindings/regulator/palmas-pmic.txt | 1 -
.../bindings/remoteproc/ti,davinci-rproc.txt | 6 ------
.../bindings/remoteproc/ti,keystone-rproc.txt | 6 ------
.../bindings/rtc/brcm,brcmstb-waketimer.txt | 2 --
.../devicetree/bindings/rtc/isil,isl12057.txt | 3 ---
.../devicetree/bindings/rtc/rtc-cmos.txt | 1 -
.../devicetree/bindings/rtc/rtc-ds1307.txt | 1 -
.../devicetree/bindings/rtc/rtc-m41t80.txt | 1 -
.../devicetree/bindings/rtc/rtc-omap.txt | 1 -
.../devicetree/bindings/rtc/rtc-palmas.txt | 1 -
.../devicetree/bindings/rtc/spear-rtc.txt | 2 --
.../bindings/rtc/sprd,sc27xx-rtc.txt | 1 -
.../devicetree/bindings/rtc/st,stm32-rtc.txt | 2 --
.../bindings/rtc/stericsson,coh901331.txt | 1 -
.../bindings/security/tpm/st33zp24-i2c.txt | 1 -
.../bindings/security/tpm/st33zp24-spi.txt | 1 -
.../bindings/security/tpm/tpm_tis_mmio.txt | 2 +-
.../bindings/serial/maxim,max310x.txt | 2 --
.../bindings/serial/nxp,sc16is7xx.txt | 4 ----
.../bindings/serial/qca,ar9330-uart.txt | 3 ---
.../bindings/soc/fsl/cpm_qe/gpio.txt | 1 -
.../bindings/soc/fsl/cpm_qe/qe/ucc.txt | 2 --
.../bindings/soc/fsl/cpm_qe/qe/usb.txt | 1 -
.../devicetree/bindings/sound/cs35l33.txt | 2 --
.../devicetree/bindings/sound/cs35l34.txt | 2 --
.../devicetree/bindings/sound/cs35l35.txt | 2 --
.../devicetree/bindings/sound/cs42l42.txt | 5 +----
.../devicetree/bindings/sound/da7218.txt | 2 --
.../devicetree/bindings/sound/da7219.txt | 2 --
.../devicetree/bindings/sound/fsl,ssi.txt | 2 --
.../devicetree/bindings/sound/omap-dmic.txt | 1 -
.../devicetree/bindings/sound/omap-mcbsp.txt | 1 -
.../devicetree/bindings/sound/omap-mcpdm.txt | 1 -
.../sound/qcom,msm8916-wcd-analog.txt | 1 -
.../devicetree/bindings/sound/rt5514.txt | 1 -
.../devicetree/bindings/sound/ts3a227e.txt | 1 -
.../devicetree/bindings/sound/ux500-msp.txt | 1 -
.../devicetree/bindings/sound/wm8994.txt | 1 -
.../devicetree/bindings/spi/fsl-spi.txt | 2 --
.../devicetree/bindings/spi/sh-hspi.txt | 2 --
.../devicetree/bindings/spi/sh-msiof.txt | 2 --
.../devicetree/bindings/spi/spi-cadence.txt | 1 -
.../devicetree/bindings/spi/spi-fsl-lpspi.txt | 1 -
.../devicetree/bindings/spi/spi-rspi.txt | 2 --
.../devicetree/bindings/spi/spi-xilinx.txt | 1 -
.../devicetree/bindings/spi/spi-xlp.txt | 1 -
.../bindings/spi/spi-zynqmp-qspi.txt | 1 -
.../bindings/staging/iio/adc/spear-adc.txt | 2 --
.../bindings/thermal/brcm,avs-tmon.txt | 1 -
.../bindings/thermal/exynos-thermal.txt | 1 -
.../bindings/timer/altr,timer-1.0.txt | 1 -
.../devicetree/bindings/timer/fsl,gtm.txt | 1 -
.../bindings/timer/marvell,orion-timer.txt | 1 -
.../bindings/timer/snps,arc-timer.txt | 4 ----
.../bindings/timer/st,spear-timer.txt | 2 --
.../bindings/timer/ti,c64x+timer64.txt | 1 -
.../devicetree/bindings/usb/fsl-usb.txt | 2 --
.../devicetree/bindings/usb/maxim,max3421.txt | 3 ---
.../bindings/usb/richtek,rt1711h.txt | 2 --
.../devicetree/bindings/usb/samsung-hsotg.txt | 2 --
.../devicetree/bindings/usb/spear-usb.txt | 4 ----
.../bindings/watchdog/cadence-wdt.txt | 1 -
.../bindings/watchdog/rt2880-wdt.txt | 1 -
Documentation/devicetree/bindings/xilinx.txt | 2 +-
.../devicetree/bindings/xillybus/xillybus.txt | 2 --
332 files changed, 9 insertions(+), 588 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt
index 669808b2af49..6dd6f399236d 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt
@@ -18,9 +18,6 @@ Required properties:
assignment of the interrupt router is required.
Flags get passed only when using GIC as parent. Flags
encoding as documented by the GIC bindings.
-- interrupt-parent: Should be the phandle for the interrupt controller of
- the CPU the device tree is intended to be used on. This
- is either the node of the GIC or NVIC controller.
Example:
mscm_ir: interrupt-controller@40001800 {
diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
index ecb360ed0e33..4cd5d873fc3a 100644
--- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt
+++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
@@ -10,7 +10,6 @@ Required properties:
- compatible : Should be "ti,irq-crossbar"
- reg: Base address and the size of the crossbar registers.
- interrupt-controller: indicates that this block is an interrupt controller.
-- interrupt-parent: the interrupt controller this block is connected to.
- ti,max-irqs: Total number of irqs available at the parent interrupt controller.
- ti,max-crossbar-sources: Maximum number of crossbar sources that can be routed.
- ti,reg-size: Size of a individual register in bytes. Every individual
diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
index 16685787d2bd..433bfd7593ac 100644
--- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
@@ -40,9 +40,6 @@ following properties:
- #interrupt-cells: must be identical to the that of the parent interrupt
controller.
-- interrupt-parent: a phandle indicating which interrupt controller
- this PMU signals interrupts to.
-
Optional nodes:
diff --git a/Documentation/devicetree/bindings/ata/fsl-sata.txt b/Documentation/devicetree/bindings/ata/fsl-sata.txt
index b46bcf46c3d8..fd63bb3becc9 100644
--- a/Documentation/devicetree/bindings/ata/fsl-sata.txt
+++ b/Documentation/devicetree/bindings/ata/fsl-sata.txt
@@ -16,7 +16,6 @@ Required properties:
4 for controller @ 0x1b000
Optional properties:
-- interrupt-parent : optional, if needed for interrupt mapping
- reg : <registers mapping>
Example:
diff --git a/Documentation/devicetree/bindings/ata/pata-arasan.txt b/Documentation/devicetree/bindings/ata/pata-arasan.txt
index 2aff154be84e..872edc105680 100644
--- a/Documentation/devicetree/bindings/ata/pata-arasan.txt
+++ b/Documentation/devicetree/bindings/ata/pata-arasan.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible: "arasan,cf-spear1340"
- reg: Address range of the CF registers
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupt: Should contain the CF interrupt number
- clock-frequency: Interface clock rate, in Hz, one of
25000000
diff --git a/Documentation/devicetree/bindings/board/fsl-board.txt b/Documentation/devicetree/bindings/board/fsl-board.txt
index fb7b03ec2071..eb52f6b35159 100644
--- a/Documentation/devicetree/bindings/board/fsl-board.txt
+++ b/Documentation/devicetree/bindings/board/fsl-board.txt
@@ -29,7 +29,6 @@ Required properties:
- reg: should contain the address and the length of the FPGA register set.
Optional properties:
-- interrupt-parent: should specify phandle for the interrupt controller.
- interrupts: should specify event (wakeup) IRQ.
Example (P1022DS):
diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
index 8a6c3c2e58fe..729def62f0c5 100644
--- a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
+++ b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
@@ -9,8 +9,6 @@ Required properties:
"brcm,bcm7400-gisb-arb" for older 40nm chips and all 65nm chips
"brcm,bcm7038-gisb-arb" for 130nm chips
- reg: specifies the base physical address and size of the registers
-- interrupt-parent: specifies the phandle to the parent interrupt controller
- this arbiter gets interrupt line from
- interrupts: specifies the two interrupts (timeout and TEA) to be used from
the parent interrupt controller
diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
index 51c259a92d02..33fe9591e904 100644
--- a/Documentation/devicetree/bindings/clock/at91-clock.txt
+++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
@@ -180,7 +180,6 @@ For example:
};
Required properties for main clock internal RC oscillator:
-- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<0>".
- clock-frequency : define the internal RC oscillator frequency.
@@ -197,7 +196,6 @@ For example:
};
Required properties for main clock oscillator:
-- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<0>".
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : shall encode the main osc source clk sources (see atmel datasheet).
@@ -218,7 +216,6 @@ For example:
};
Required properties for main clock:
-- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<0>".
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : shall encode the main clk sources (see atmel datasheet).
@@ -233,7 +230,6 @@ For example:
};
Required properties for master clock:
-- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<3>".
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : shall be the master clock sources (see atmel datasheet) phandles.
@@ -292,7 +288,6 @@ For example:
Required properties for pll clocks:
-- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<1>".
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : shall be the main clock phandle.
@@ -348,7 +343,6 @@ For example:
};
Required properties for programmable clocks:
-- interrupt-parent : must reference the PMC node.
- #size-cells : shall be 0 (reg is used to encode clk id).
- #address-cells : shall be 1 (reg is used to encode clk id).
- clocks : shall be the programmable clock source phandles.
@@ -451,7 +445,6 @@ For example:
Required properties for utmi clock:
-- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<AT91_PMC_LOCKU IRQ_TYPE_LEVEL_HIGH>".
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : shall be the main clock source phandle.
diff --git a/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
index af2385795d78..73470ecd1f12 100644
--- a/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
+++ b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
@@ -29,8 +29,6 @@ Required properties:
- reg: Specifies base physical address and size of the registers.
- interrupts: The interrupt that the AVS CPU will use to interrupt the host
when a command completed.
-- interrupt-parent: The interrupt controller the above interrupt is routed
- through.
- interrupt-names: The name of the interrupt used to interrupt the host.
Optional properties:
diff --git a/Documentation/devicetree/bindings/crypto/amd-ccp.txt b/Documentation/devicetree/bindings/crypto/amd-ccp.txt
index 8c61183b41e0..d87579d63da6 100644
--- a/Documentation/devicetree/bindings/crypto/amd-ccp.txt
+++ b/Documentation/devicetree/bindings/crypto/amd-ccp.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible: Should be "amd,ccp-seattle-v1a"
- reg: Address and length of the register set for the device
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the CCP interrupt
Optional properties:
diff --git a/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt b/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt
index c2598ab27f2e..999fb2a810f6 100644
--- a/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt
+++ b/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt
@@ -7,8 +7,6 @@ Required properties:
- interrupts: Interrupt number for the device.
Optional properties:
-- interrupt-parent: The phandle for the interrupt controller that services
- interrupts for this device.
- clocks: Reference to the crypto engine clock.
- dma-coherent: Present if dma operations are coherent.
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec2.txt b/Documentation/devicetree/bindings/crypto/fsl-sec2.txt
index f0d926bf9f36..125f155d00d0 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-sec2.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec2.txt
@@ -50,11 +50,6 @@ remaining bits are reserved for future SEC EUs.
..and so on and so forth.
-Optional properties:
-
-- interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
-
Example:
/* MPC8548E */
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
index 3c1f3a229eab..2fe245ca816a 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
@@ -99,13 +99,6 @@ PROPERTIES
of the specifier is defined by the binding document
describing the node's interrupt parent.
- - interrupt-parent
- Usage: (required if interrupt property is defined)
- Value type: <phandle>
- Definition: A single <phandle> value that points
- to the interrupt parent to which the child domain
- is being mapped.
-
- clocks
Usage: required if SEC 4.0 requires explicit enablement of clocks
Value type: <prop_encoded-array>
@@ -199,13 +192,6 @@ Job Ring (JR) Node
of the specifier is defined by the binding document
describing the node's interrupt parent.
- - interrupt-parent
- Usage: (required if interrupt property is defined)
- Value type: <phandle>
- Definition: A single <phandle> value that points
- to the interrupt parent to which the child domain
- is being mapped.
-
EXAMPLE
jr@1000 {
compatible = "fsl,sec-v4.0-job-ring";
@@ -370,13 +356,6 @@ Secure Non-Volatile Storage (SNVS) Node
of the specifier is defined by the binding document
describing the node's interrupt parent.
- - interrupt-parent
- Usage: (required if interrupt property is defined)
- Value type: <phandle>
- Definition: A single <phandle> value that points
- to the interrupt parent to which the child domain
- is being mapped.
-
EXAMPLE
sec_mon@314000 {
compatible = "fsl,sec-v4.0-mon", "syscon";
diff --git a/Documentation/devicetree/bindings/crypto/picochip-spacc.txt b/Documentation/devicetree/bindings/crypto/picochip-spacc.txt
index d8609ece1f4c..df1151f87745 100644
--- a/Documentation/devicetree/bindings/crypto/picochip-spacc.txt
+++ b/Documentation/devicetree/bindings/crypto/picochip-spacc.txt
@@ -7,8 +7,6 @@ Required properties:
- compatible : "picochip,spacc-ipsec" for the IPSEC offload engine
"picochip,spacc-l2" for the femtocell layer 2 ciphering engine.
- reg : Offset and length of the register set for this device
- - interrupt-parent : The interrupt controller that controls the SPAcc
- interrupt.
- interrupts : The interrupt line from the SPAcc.
- ref-clock : The input clock that drives the SPAcc.
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
index 0c7473dd0e51..027d76c27a41 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -15,8 +15,6 @@ Required properties for dp-controller:
from common clock binding: handle to dp clock.
-clock-names:
from common clock binding: Shall be "dp".
- -interrupt-parent:
- phandle to Interrupt combiner node.
-phys:
from general PHY binding: the phandle for the PHY device.
-phy-names:
diff --git a/Documentation/devicetree/bindings/display/bridge/anx7814.txt b/Documentation/devicetree/bindings/display/bridge/anx7814.txt
index b2a22c28c9b3..dbd7c84ee584 100644
--- a/Documentation/devicetree/bindings/display/bridge/anx7814.txt
+++ b/Documentation/devicetree/bindings/display/bridge/anx7814.txt
@@ -8,8 +8,6 @@ Required properties:
- compatible : "analogix,anx7814"
- reg : I2C address of the device
- - interrupt-parent : Should be the phandle of the interrupt controller
- that services interrupts for this device
- interrupts : Should contain the INTP interrupt
- hpd-gpios : Which GPIO to use for hpd
- pd-gpios : Which GPIO to use for power down
diff --git a/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
index aacc8b92968c..09e0a21f705e 100644
--- a/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
+++ b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
@@ -19,8 +19,6 @@ hardware are EDID, HPD, and interrupts.
stdp4028-ge-b850v3-fw required properties:
- compatible : "megachips,stdp4028-ge-b850v3-fw"
- reg : I2C bus address
- - interrupt-parent : phandle of the interrupt controller that services
- interrupts to the device
- interrupts : one interrupt should be described here, as in
<0 IRQ_TYPE_LEVEL_HIGH>
- ports : One input port(reg = <0>) and one output port(reg = <1>)
diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
index 56a3e68ccb80..72d2dc6c3e6b 100644
--- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt
+++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
@@ -5,8 +5,8 @@ Required properties:
- reg: i2c address of the bridge
Optional properties:
- - interrupts-extended or interrupt-parent + interrupts: describe
- the interrupt line used to inform the host about hotplug events.
+ - interrupts: describe the interrupt line used to inform the host
+ about hotplug events.
- reset-gpios: OF device-tree gpio specification for RST_N pin.
Optional subnodes:
diff --git a/Documentation/devicetree/bindings/display/bridge/sii9234.txt b/Documentation/devicetree/bindings/display/bridge/sii9234.txt
index 88041ba23d56..a55bf77bd960 100644
--- a/Documentation/devicetree/bindings/display/bridge/sii9234.txt
+++ b/Documentation/devicetree/bindings/display/bridge/sii9234.txt
@@ -7,7 +7,7 @@ Required properties:
- iovcc18-supply : I/O Supply Voltage (1.8V)
- avcc12-supply : TMDS Analog Supply Voltage (1.2V)
- cvcc12-supply : Digital Core Supply Voltage (1.2V)
- - interrupts, interrupt-parent: interrupt specifier of INT pin
+ - interrupts: interrupt specifier of INT pin
- reset-gpios: gpio specifier of RESET pin (active low)
- video interfaces: Device node can contain two video interface port
nodes for HDMI encoder and connector according to [1].
diff --git a/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt b/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt
index 9409d9c6a260..b05052f7d62f 100644
--- a/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt
+++ b/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt
@@ -5,7 +5,7 @@ Required properties:
- reg: i2c address of the bridge
- cvcc10-supply: Digital Core Supply Voltage (1.0V)
- iovcc18-supply: I/O Supply Voltage (1.8V)
- - interrupts, interrupt-parent: interrupt specifier of INT pin
+ - interrupts: interrupt specifier of INT pin
- reset-gpios: gpio specifier of RESET pin
- clocks, clock-names: specification and name of "xtal" clock
- video interfaces: Device node can contain video interface port
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt
index 9e2e7f6f7609..53912c99ec38 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt
@@ -9,9 +9,6 @@ Required properties:
- reg: physical base address and length of the DECON registers set.
-- interrupt-parent: should be the phandle of the decon controller's
- parent interrupt controller.
-
- interrupts: should contain a list of all DECON IP block interrupts in the
order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
format depends on the interrupt controller used.
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
index ade5d8eebf85..9b6cba3f82af 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -25,8 +25,6 @@ Required properties for dp-controller:
from common clock binding: handle to dp clock.
-clock-names:
from common clock binding: Shall be "dp".
- -interrupt-parent:
- phandle to Interrupt combiner node.
-phys:
from general PHY binding: the phandle for the PHY device.
-phy-names:
diff --git a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
index 5837402c3ade..b3096421d42b 100644
--- a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
+++ b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
@@ -16,9 +16,6 @@ Required properties:
- reg: physical base address and length of the FIMD registers set.
-- interrupt-parent: should be the phandle of the fimd controller's
- parent interrupt controller.
-
- interrupts: should contain a list of all FIMD IP block interrupts in the
order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
format depends on the interrupt controller used.
diff --git a/Documentation/devicetree/bindings/display/ht16k33.txt b/Documentation/devicetree/bindings/display/ht16k33.txt
index 8e5b30b87754..d5a8b070b467 100644
--- a/Documentation/devicetree/bindings/display/ht16k33.txt
+++ b/Documentation/devicetree/bindings/display/ht16k33.txt
@@ -4,8 +4,6 @@ Holtek ht16k33 RAM mapping 16*8 LED controller driver with keyscan
Required properties:
- compatible: "holtek,ht16k33"
- reg: I2C slave address of the chip.
-- interrupt-parent: A phandle pointing to the interrupt controller
- serving the interrupt for this chip.
- interrupts: Interrupt specification for the key pressed interrupt.
- refresh-rate-hz: Display update interval in HZ.
- debounce-delay-ms: Debouncing interval time in milliseconds.
diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index 518e9cdf0d4b..5eaffca2e28c 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -43,8 +43,6 @@ Optional properties:
the master link of the 2-DSI panel.
- qcom,sync-dual-dsi: Boolean value indicating if the DSI controller is
driving a 2-DSI panel whose 2 links need receive command simultaneously.
-- interrupt-parent: phandle to the MDP block if the interrupt signal is routed
- through MDP block
- pinctrl-names: the pin control state names; should contain "default"
- pinctrl-0: the default pinctrl state (active)
- pinctrl-n: the "sleep" pinctrl state
diff --git a/Documentation/devicetree/bindings/display/msm/edp.txt b/Documentation/devicetree/bindings/display/msm/edp.txt
index 95ce19ca7bc5..eff9daff418c 100644
--- a/Documentation/devicetree/bindings/display/msm/edp.txt
+++ b/Documentation/devicetree/bindings/display/msm/edp.txt
@@ -25,10 +25,6 @@ Required properties:
- panel-hpd-gpios: GPIO pin used for eDP hpd.
-Optional properties:
-- interrupt-parent: phandle to the MDP block if the interrupt signal is routed
- through MDP block
-
Example:
mdss_edp: qcom,mdss_edp@fd923400 {
compatible = "qcom,mdss-edp";
diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt
index 1b31977a68ba..4e11338548aa 100644
--- a/Documentation/devicetree/bindings/display/msm/mdp5.txt
+++ b/Documentation/devicetree/bindings/display/msm/mdp5.txt
@@ -41,8 +41,6 @@ Required properties:
- reg-names: The names of register regions. The following regions are required:
* "mdp_phys"
- interrupts: Interrupt line from MDP5 to MDSS interrupt controller.
-- interrupt-parent: phandle to the MDSS block
- through MDP block
- clocks: device clocks. See ../clocks/clock-bindings.txt for details.
- clock-names: the following clocks are required.
- * "bus"
diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt
index 7c6854bd0a04..ec9d34be2ff7 100644
--- a/Documentation/devicetree/bindings/display/renesas,du.txt
+++ b/Documentation/devicetree/bindings/display/renesas,du.txt
@@ -19,7 +19,6 @@ Required Properties:
- reg: the memory-mapped I/O registers base address and length
- - interrupt-parent: phandle of the parent interrupt controller.
- interrupts: Interrupt specifiers for the DU interrupts.
- clocks: A list of phandles + clock-specifier pairs, one for each entry in
diff --git a/Documentation/devicetree/bindings/display/sm501fb.txt b/Documentation/devicetree/bindings/display/sm501fb.txt
index 9d9f0098092b..1c79c267a57f 100644
--- a/Documentation/devicetree/bindings/display/sm501fb.txt
+++ b/Documentation/devicetree/bindings/display/sm501fb.txt
@@ -9,8 +9,6 @@ Required properties:
- First entry: System Configuration register
- Second entry: IO space (Display Controller register)
- interrupts : SMI interrupt to the cpu should be described here.
-- interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
Optional properties:
- mode : select a video mode:
diff --git a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
index 3055d5c2c04e..7bf1bb444812 100644
--- a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
+++ b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
@@ -8,8 +8,6 @@ Required properties:
- reg: base address and size of the LCDC device
Recommended properties:
- - interrupt-parent: the phandle for the interrupt controller that
- services interrupts for this device.
- ti,hwmods: Name of the hwmod associated to the LCDC
Optional properties:
diff --git a/Documentation/devicetree/bindings/dma/jz4780-dma.txt b/Documentation/devicetree/bindings/dma/jz4780-dma.txt
index f25feee62b15..03e9cf7b42e0 100644
--- a/Documentation/devicetree/bindings/dma/jz4780-dma.txt
+++ b/Documentation/devicetree/bindings/dma/jz4780-dma.txt
@@ -5,7 +5,6 @@ Required properties:
- compatible: Should be "ingenic,jz4780-dma"
- reg: Should contain the DMA controller registers location and length.
- interrupts: Should contain the interrupt specifier of the DMA controller.
-- interrupt-parent: Should be the phandle of the interrupt controller that
- clocks: Should contain a clock specifier for the JZ4780 PDMA clock.
- #dma-cells: Must be <2>. Number of integer cells in the dmas property of
DMA clients (see below).
diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt
index 1e1dc8f972e4..2f35b047f772 100644
--- a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt
+++ b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt
@@ -8,7 +8,6 @@ Required properties:
- reg: Should contain DMA registers location and length. This should be
a single entry that includes all of the per-channel registers in one
contiguous bank.
-- interrupt-parent: Phandle to the interrupt parent controller.
- interrupts: Should contain all of the per-channel DMA interrupts in
ascending order with respect to the DMA channel index.
- clocks: Must contain one entry for the ADMA module clock
diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
index f237b7928283..dbe160400adc 100644
--- a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
+++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
@@ -5,8 +5,6 @@ Required properties:
- reg: Address range of the DMAC registers. This should include
all of the per-channel registers.
- interrupt: Should contain the DMAC interrupt number.
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device.
- dma-channels: Number of channels supported by hardware.
- snps,dma-masters: Number of AXI masters supported by the hardware.
- snps,data-width: Maximum AXI data width supported by hardware.
diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt
index 99acc712f83a..39e2b26be344 100644
--- a/Documentation/devicetree/bindings/dma/snps-dma.txt
+++ b/Documentation/devicetree/bindings/dma/snps-dma.txt
@@ -23,8 +23,6 @@ Deprecated properties:
Optional properties:
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- is_private: The device channels should be marked as private and not for by the
general purpose DMA channel allocator. False if not passed.
- multi-block: Multi block transfers supported by hardware. Array property with
diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
index 3f15f6644527..4bbc94d829c8 100644
--- a/Documentation/devicetree/bindings/dma/ti-edma.txt
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -201,7 +201,6 @@ Required properties:
- #dma-cells: Should be set to <1>
Clients should use a single channel number per DMA request.
- reg: Memory map for accessing module
-- interrupt-parent: Interrupt controller the interrupt is routed through
- interrupts: Exactly 3 interrupts need to be specified in the order:
1. Transfer completion interrupt.
2. Memory protection interrupt.
diff --git a/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
index a784cdd94790..07a5a7aa9ea0 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
@@ -5,7 +5,6 @@ control and rate control support for slave/peripheral dma access.
Required properties:
- compatible : Should be "xlnx,zynqmp-dma-1.0"
- reg : Memory map for gdma/adma module access.
-- interrupt-parent : Interrupt controller the interrupt is routed through
- interrupts : Should contain DMA channel interrupt.
- xlnx,bus-width : Axi buswidth in bits. Should contain 128 or 64
- clock-names : List of input clocks "clk_main", "clk_apb"
diff --git a/Documentation/devicetree/bindings/extcon/extcon-rt8973a.txt b/Documentation/devicetree/bindings/extcon/extcon-rt8973a.txt
index 6dede7d11532..cfcf455ad4de 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-rt8973a.txt
+++ b/Documentation/devicetree/bindings/extcon/extcon-rt8973a.txt
@@ -11,8 +11,6 @@ for USB D-/D+ switching.
Required properties:
- compatible: Should be "richtek,rt8973a-muic"
- reg: Specifies the I2C slave address of the MUIC block. It should be 0x14
-- interrupt-parent: Specifies the phandle of the interrupt controller to which
- the interrupts from rt8973a are delivered to.
- interrupts: Interrupt specifiers for detection interrupt sources.
Example:
diff --git a/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt b/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt
index 4ecda224955f..fc3888e09549 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt
+++ b/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt
@@ -9,8 +9,6 @@ the host controller using an I2C interface.
Required properties:
- compatible: Should be "siliconmitus,sm5502-muic"
- reg: Specifies the I2C slave address of the MUIC block. It should be 0x25
-- interrupt-parent: Specifies the phandle of the interrupt controller to which
- the interrupts from sm5502 are delivered to.
- interrupts: Interrupt specifiers for detection interrupt sources.
Example:
diff --git a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
index 798cfc9d3839..973362eb3f1e 100644
--- a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
@@ -25,8 +25,6 @@ Required properties:
- #gpio-cells: Should be two. The first cell is the pin number
and the second cell is used to specify optional
parameters (currently unused).
-- interrupt-parent: Phandle for the interrupt controller that
- services interrupts for this device.
- interrupts: Interrupt mapping for GPIO IRQ.
- gpio-controller: Marks the port as GPIO controller.
diff --git a/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt b/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt
index a25c87b650e5..ce19c5660aca 100644
--- a/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt
@@ -14,7 +14,6 @@ Optional Properties:
- #interrupt-cells: Should be <1>. Interrupts are triggered on both edges.
- interrupts: Defines the interrupt line connecting this GPIO controller to
its parent interrupt controller.
-- interrupt-parent: Defines the parent interrupt controller.
GPIO ranges are specified as described in
Documentation/devicetree/bindings/gpio/gpio.txt
diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
index b405b4410bfb..5d468ecd1809 100644
--- a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
@@ -30,9 +30,6 @@ Optional properties:
- interrupts:
The interrupt shared by all GPIO lines for this controller.
-- interrupt-parent:
- phandle of the parent interrupt controller
-
- interrupts-extended:
Alternate form of specifying interrupts and parents that allows for
multiple parents. This takes precedence over 'interrupts' and
diff --git a/Documentation/devicetree/bindings/gpio/gpio-adnp.txt b/Documentation/devicetree/bindings/gpio/gpio-adnp.txt
index af66b2724837..a28902a65a62 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-adnp.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-adnp.txt
@@ -3,7 +3,6 @@ Avionic Design N-bit GPIO expander bindings
Required properties:
- compatible: should be "ad,gpio-adnp"
- reg: The I2C slave address for this device.
-- interrupt-parent: phandle of the parent interrupt controller.
- interrupts: Interrupt specifier for the controllers interrupt.
- #gpio-cells: Should be 2. The first cell is the GPIO number and the
second cell is used to specify optional parameters:
diff --git a/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt b/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
index fc6378c778c5..7e9b586770b0 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
@@ -17,7 +17,6 @@ Required properties:
Optional properties:
-- interrupt-parent : The parent interrupt controller, optional if inherited
- clocks : A phandle to the clock to use for debounce timings
The gpio and interrupt properties are further described in their respective
diff --git a/Documentation/devicetree/bindings/gpio/gpio-ath79.txt b/Documentation/devicetree/bindings/gpio/gpio-ath79.txt
index c522851017ae..cf71f3ec969d 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-ath79.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-ath79.txt
@@ -12,7 +12,6 @@ Required properties:
- ngpios: Should be set to the number of GPIOs available on the SoC.
Optional properties:
-- interrupt-parent: phandle of the parent interrupt controller.
- interrupts: Interrupt specifier for the controllers interrupt.
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode interrupt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
index 8beb0539b6d8..553b92a7e87b 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
@@ -15,8 +15,6 @@ Required Properties:
- first cell is the pin number
- second cell is used to specify optional parameters (unused)
-- interrupt-parent: phandle of the parent interrupt controller.
-
- interrupts: Array of GPIO interrupt number. Only banked or unbanked IRQs are
supported at a time.
diff --git a/Documentation/devicetree/bindings/gpio/gpio-max732x.txt b/Documentation/devicetree/bindings/gpio/gpio-max732x.txt
index 5fdc843b4542..b3a9c0c32823 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-max732x.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-max732x.txt
@@ -30,7 +30,6 @@ Optional properties:
- #interrupt-cells: Number of cells to encode an interrupt source, shall be 2.
- first cell is the pin number
- second cell is used to specify flags
- - interrupt-parent: phandle of the parent interrupt controller.
- interrupts: Interrupt specifier for the controllers interrupt.
Please refer to gpio.txt in this directory for details of the common GPIO
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
index 7d3bd631d011..a482455a205b 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
@@ -49,7 +49,6 @@ Optional Properties:
- interrupt-controller: Identifies the node as an interrupt controller.
- #interrupt-cells: Number of cells to encode an interrupt source, shall be 2.
- - interrupt-parent: phandle of the parent interrupt controller.
- interrupts: Interrupt specifier for the controllers interrupt.
diff --git a/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt b/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt
index fed9158dd913..f281f12dac18 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt
@@ -6,7 +6,6 @@ Required properties:
- gpio-controller: Marks the device node as a GPIO controller.
- #gpio-cells: Should be 2. The first cell is the pin number and the second
cell is used to specify optional parameters.
-- interrupt-parent: Specifies the parent interrupt controller.
- interrupt-controller: Marks the device node as an interrupt controller.
- #interrupt-cells: Should be 2. The first cell defines the interrupt number.
The second cell bits[3:0] is used to specify trigger type as follows:
diff --git a/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt b/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt
index 5490c1d68981..e90fb987e25f 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt
@@ -26,7 +26,6 @@ Required properties:
1 = active low
- gpio-controller: Marks the device node as a GPIO controller.
- interrupts: The EXT_INT_0 parent interrupt resource must be listed first.
-- interrupt-parent: Phandle of the parent interrupt controller.
- interrupt-cells: Should be two.
- first cell is 0-N coresponding for EXT_INT_0 to EXT_INT_N.
- second cell is used to specify flags.
diff --git a/Documentation/devicetree/bindings/gpio/gpio-xilinx.txt b/Documentation/devicetree/bindings/gpio/gpio-xilinx.txt
index 63bf4becd5f0..08eed2335db0 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-xilinx.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-xilinx.txt
@@ -14,8 +14,6 @@ Required properties:
Optional properties:
- interrupts : Interrupt mapping for GPIO IRQ.
-- interrupt-parent : Phandle for the interrupt controller that
- services interrupts for this device.
- xlnx,all-inputs : if n-th bit is setup, GPIO-n is input
- xlnx,dout-default : if n-th bit is 1, GPIO-n default value is 1
- xlnx,gpio-width : gpio width
diff --git a/Documentation/devicetree/bindings/gpio/gpio-xlp.txt b/Documentation/devicetree/bindings/gpio/gpio-xlp.txt
index 28662d83a43e..47fc64922fe0 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-xlp.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-xlp.txt
@@ -30,7 +30,6 @@ Required properties:
4 = active high level-sensitive.
8 = active low level-sensitive.
- interrupts: Interrupt number for this device.
-- interrupt-parent: phandle of the parent interrupt controller.
- interrupt-controller: Identifies the node as an interrupt controller.
Example:
diff --git a/Documentation/devicetree/bindings/gpio/gpio-zynq.txt b/Documentation/devicetree/bindings/gpio/gpio-zynq.txt
index 7b542657f259..4fa4eb5507cd 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-zynq.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-zynq.txt
@@ -11,7 +11,6 @@ Required properties:
- gpio-controller : Marks the device node as a GPIO controller.
- interrupts : Interrupt specifier (see interrupt bindings for
details)
-- interrupt-parent : Must be core interrupt controller
- interrupt-controller : Marks the device node as an interrupt controller.
- #interrupt-cells : Should be 2. The first cell is the GPIO number.
The second cell bits[3:0] is used to specify trigger type and level flags:
diff --git a/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt b/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
index 20fc72d9e61e..8c9e4c3d788d 100644
--- a/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
@@ -14,7 +14,6 @@ Optional properties:
- #interrupt-cells: Should be two.
- interrupts: Interrupt specifier for the controller's Broadway (PowerPC)
interrupt.
-- interrupt-parent: phandle of the parent interrupt controller.
Example:
diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
index 378f1322211e..fe1bf24104d3 100644
--- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
+++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
@@ -31,7 +31,6 @@ Required Properties:
- reg: Base address and length of each memory resource used by the GPIO
controller hardware module.
- - interrupt-parent: phandle of the parent interrupt controller.
- interrupts: Interrupt specifier for the controllers interrupt.
- gpio-controller: Marks the device node as a gpio controller.
diff --git a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
index 3c1118bc67f5..7276b50c3506 100644
--- a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
@@ -25,7 +25,6 @@ controller.
interrupt. Shall be set to 2. The first cell defines the interrupt number,
the second encodes the triger flags encoded as described in
Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-- interrupt-parent : The parent interrupt controller.
- interrupts : The interrupts to the parent controller raised when GPIOs
generate the interrupts. If the controller provides one combined interrupt
for all GPIOs, specify a single interrupt. If the controller provides one
diff --git a/Documentation/devicetree/bindings/hsi/omap-ssi.txt b/Documentation/devicetree/bindings/hsi/omap-ssi.txt
index 955e335e7e56..77a0c3c3036e 100644
--- a/Documentation/devicetree/bindings/hsi/omap-ssi.txt
+++ b/Documentation/devicetree/bindings/hsi/omap-ssi.txt
@@ -33,7 +33,6 @@ Required Port sub-node properties:
- reg-names: Contains the values "tx" and "rx" (in this order).
- reg: Contains a matching register specifier for each entry
in reg-names.
-- interrupt-parent Should be a phandle for the interrupt controller
- interrupts: Should contain interrupt specifiers for mpu interrupts
0 and 1 (in this order).
- ti,ssi-cawake-gpio: Defines which GPIO pin is used to signify CAWAKE
diff --git a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
index e7106bfc1f13..8fbd8633a387 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
@@ -11,9 +11,6 @@ Required Properties:
- resets : phandle to reset controller with the reset number in
the second cell
- interrupts : interrupt number
-- interrupt-parent : interrupt controller for bus, should reference a
- aspeed,ast2400-i2c-ic or aspeed,ast2500-i2c-ic
- interrupt controller
Optional Properties:
- bus-frequency : frequency of the bus clock in Hz defaults to 100 kHz when not
diff --git a/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt b/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt
index aeceaceba3c5..0380609b177a 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt
@@ -10,8 +10,6 @@ Required properties:
Optional properties :
-- interrupt-parent: specifies the phandle to the parent interrupt controller
- this one is cascaded from
- interrupts: specifies the interrupt number, the irq line to be used
- interrupt-names: Interrupt name string
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
index 60fe90d69f4e..00e4365d7206 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
@@ -5,7 +5,6 @@ Required properties:
- "fsl,imx7ulp-lpi2c" for LPI2C compatible with the one integrated on i.MX7ULP soc
- "fsl,imx8dv-lpi2c" for LPI2C compatible with the one integrated on i.MX8DV soc
- reg : address and length of the lpi2c master registers
-- interrupt-parent : core interrupt controller
- interrupts : lpi2c interrupt
- clocks : lpi2c clock specifier
diff --git a/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt b/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt
index d4a082acf92f..3738cfbf863f 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt
@@ -11,10 +11,6 @@ Recommended properties:
- pinctrl-names: should be "default";
- pinctrl-0: phandle to pinctrl function
-Optional properties:
-- interrupt-parent: Should be the phandle of the interrupt controller that
- delivers interrupts to the I2C block.
-
Example
/ {
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.txt b/Documentation/devicetree/bindings/i2c/i2c-mpc.txt
index 1eacd6b20ed5..42a390526957 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mpc.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mpc.txt
@@ -15,8 +15,6 @@ Recommended properties :
information for the interrupt. This should be encoded based on
the information in section 2) depending on the type of interrupt
controller you have.
- - interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
- fsl,preserve-clocking : boolean; if defined, the clock settings
from the bootloader are preserved (not touched).
- clock-frequency : desired I2C bus clock frequency in Hz.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
index 34d91501342e..ccf6c86ed076 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
@@ -28,8 +28,6 @@ Optional Properties:
- i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
children in idle state. This is necessary for example, if there are several
multiplexers on the bus and the devices behind them use same I2C addresses.
- - interrupt-parent: Phandle for the interrupt controller that services
- interrupts for this device.
- interrupts: Interrupt mapping for IRQ.
- interrupt-controller: Marks the device node as an interrupt controller.
- #interrupt-cells : Should be two.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt b/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt
index f1f3876bb8e8..73a693d66ef7 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt
@@ -12,8 +12,6 @@ Required properties :
Optional properties
- interrupts : the interrupt number
- - interrupt-parent : the phandle for the interrupt controller.
- If an interrupt is not specified polling will be used.
- reset-gpios : gpio specifier for gpio connected to RESET_N pin. As the line
is active low, it should be marked GPIO_ACTIVE_LOW.
- clock-frequency : I2C bus frequency.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-pnx.txt b/Documentation/devicetree/bindings/i2c/i2c-pnx.txt
index fe98ada33ee4..2a59006cf79e 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-pnx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-pnx.txt
@@ -7,8 +7,6 @@ Required properties:
- interrupts: configure one interrupt line
- #address-cells: always 1 (for i2c addresses)
- #size-cells: always 0
- - interrupt-parent: the phandle for the interrupt controller that
- services interrupts for this device.
Optional properties:
diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt
index d30f0b11d853..c30783c0eca0 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt
@@ -12,9 +12,6 @@ Required properties :
Recommended properties :
- interrupts : the interrupt number
- - interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device. If the parent is the default
- interrupt controller in device tree, it could be ignored.
- mrvl,i2c-polling : Disable interrupt of i2c controller. Polling
status register of i2c controller instead.
- mrvl,i2c-fast-mode : Enable fast mode of i2c controller.
diff --git a/Documentation/devicetree/bindings/iio/accel/adxl345.txt b/Documentation/devicetree/bindings/iio/accel/adxl345.txt
index e7111b02c02c..ae09a046bc72 100644
--- a/Documentation/devicetree/bindings/iio/accel/adxl345.txt
+++ b/Documentation/devicetree/bindings/iio/accel/adxl345.txt
@@ -11,8 +11,6 @@ Required properties for SPI bus usage:
- spi-cpol and spi-cpha : must be defined for adxl345 to enable SPI mode 3
Optional properties:
- - interrupt-parent : phandle to the parent interrupt controller as documented
- in Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
- interrupts: interrupt mapping for IRQ as documented in
Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
diff --git a/Documentation/devicetree/bindings/iio/accel/bma180.txt b/Documentation/devicetree/bindings/iio/accel/bma180.txt
index 4a3679d54457..3b25b4c4d446 100644
--- a/Documentation/devicetree/bindings/iio/accel/bma180.txt
+++ b/Documentation/devicetree/bindings/iio/accel/bma180.txt
@@ -10,8 +10,6 @@ Required properties:
Optional properties:
- - interrupt-parent : should be the phandle for the interrupt controller
-
- interrupts : interrupt mapping for GPIO IRQ, it should by configured with
flags IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING
For the bma250 the first interrupt listed must be the one
diff --git a/Documentation/devicetree/bindings/iio/accel/mma8452.txt b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
index 45f5c5c5929c..2100e9af379c 100644
--- a/Documentation/devicetree/bindings/iio/accel/mma8452.txt
+++ b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
@@ -15,8 +15,6 @@ Required properties:
Optional properties:
- - interrupt-parent: should be the phandle for the interrupt controller
-
- interrupts: interrupt mapping for GPIO IRQ
- interrupt-names: should contain "INT1" and/or "INT2", the accelerometer's
diff --git a/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt b/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt
index 487ea966858e..ec04008e8f4f 100644
--- a/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt
@@ -2,7 +2,6 @@ Motorola CPCAP PMIC ADC binding
Required properties:
- compatible: Should be "motorola,cpcap-adc" or "motorola,mapphone-cpcap-adc"
-- interrupt-parent: The interrupt controller
- interrupts: The interrupt number for the ADC device
- interrupt-names: Should be "adcdone"
- #io-channel-cells: Number of cells in an IIO specifier
diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt
index b0866d36a307..eebdcec3dab5 100644
--- a/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt
+++ b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt
@@ -8,7 +8,6 @@ Required properties:
- reg: Should be the register range of the module.
- interrupts: Should be the interrupt number of the module.
Typically this is <1>.
- - interrupt-parent: phandle to the tsadc module of the i.MX25.
- #address-cells: Should be <1> (setting for the subnodes)
- #size-cells: Should be <0> (setting for the subnodes)
diff --git a/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt
index a8770cc6bcad..e680c61dfb84 100644
--- a/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible: Should be "maxim,max1027" or "maxim,max1029" or "maxim,max1031"
- reg: SPI chip select number for the device
- - interrupt-parent: phandle to the parent interrupt controller
- see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
- interrupts: IRQ line for the ADC
see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
index f1ead43a1a95..8346bcb04ad7 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
@@ -60,7 +60,6 @@ Required properties:
- reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200).
- clocks: Input clock private to this ADC instance. It's required only on
stm32f4, that has per instance clock input for registers access.
-- interrupt-parent: Phandle to the parent interrupt controller.
- interrupts: IRQ Line for the ADC (e.g. may be 0 for adc@0, 1 for adc@100 or
2 for adc@200).
- st,adc-channels: List of single-ended channels muxed for this ADC.
diff --git a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
index d71258e2d456..e0e0755cabd8 100644
--- a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
@@ -22,7 +22,6 @@ Required properties:
clock to the AXI bus interface of the core.
Optional properties:
- - interrupt-parent: phandle to the parent interrupt controller
- xlnx,external-mux:
* "none": No external multiplexer is used, this is the default
if the property is omitted.
diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt b/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt
index 2962bd9a2b3d..f4320595b851 100644
--- a/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt
+++ b/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt
@@ -6,7 +6,6 @@ Required properties:
- compatible: must be "atlas,ec-sm"
- reg: the I2C address of the sensor
- - interrupt-parent: should be the phandle for the interrupt controller
- interrupts: the sole interrupt generated by the device
Refer to interrupt-controller/interrupts.txt for generic interrupt client
diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt b/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt
index 5d8b687d5edc..af1f5a9aa4da 100644
--- a/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt
+++ b/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt
@@ -6,7 +6,6 @@ Required properties:
- compatible: must be "atlas,orp-sm"
- reg: the I2C address of the sensor
- - interrupt-parent: should be the phandle for the interrupt controller
- interrupts: the sole interrupt generated by the device
Refer to interrupt-controller/interrupts.txt for generic interrupt client
diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt b/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt
index cffa1907463a..79d90f060327 100644
--- a/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt
+++ b/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt
@@ -6,7 +6,6 @@ Required properties:
- compatible: must be "atlas,ph-sm"
- reg: the I2C address of the sensor
- - interrupt-parent: should be the phandle for the interrupt controller
- interrupts: the sole interrupt generated by the device
Refer to interrupt-controller/interrupts.txt for generic interrupt client
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt
index b0d3b59966bc..233fe207aded 100644
--- a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt
+++ b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt
@@ -5,7 +5,6 @@ Required properties:
- reg : the I2C address of the sensor
Optional properties:
- - interrupt-parent : should be the phandle for the interrupt controller
- interrupts : interrupt mapping for the trigger interrupt from the
internal oscillator. The following IRQ modes are supported:
IRQ_TYPE_EDGE_RISING, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH and
diff --git a/Documentation/devicetree/bindings/iio/health/afe4403.txt b/Documentation/devicetree/bindings/iio/health/afe4403.txt
index 2fffd70336ba..8e412054d6d5 100644
--- a/Documentation/devicetree/bindings/iio/health/afe4403.txt
+++ b/Documentation/devicetree/bindings/iio/health/afe4403.txt
@@ -4,7 +4,6 @@ Required properties:
- compatible : Should be "ti,afe4403".
- reg : SPI chip select address of device.
- tx-supply : Regulator supply to transmitting LEDs.
- - interrupt-parent : Phandle to he parent interrupt controller.
- interrupts : The interrupt line the device ADC_RDY pin is
connected to. For details refer to,
../../interrupt-controller/interrupts.txt.
diff --git a/Documentation/devicetree/bindings/iio/health/afe4404.txt b/Documentation/devicetree/bindings/iio/health/afe4404.txt
index de69f203edfa..0b52830a0d9c 100644
--- a/Documentation/devicetree/bindings/iio/health/afe4404.txt
+++ b/Documentation/devicetree/bindings/iio/health/afe4404.txt
@@ -4,7 +4,6 @@ Required properties:
- compatible : Should be "ti,afe4404".
- reg : I2C address of the device.
- tx-supply : Regulator supply to transmitting LEDs.
- - interrupt-parent : Phandle to he parent interrupt controller.
- interrupts : The interrupt line the device ADC_RDY pin is
connected to. For details refer to,
../interrupt-controller/interrupts.txt.
diff --git a/Documentation/devicetree/bindings/iio/health/max30100.txt b/Documentation/devicetree/bindings/iio/health/max30100.txt
index 8d8176459d09..0054908a6e74 100644
--- a/Documentation/devicetree/bindings/iio/health/max30100.txt
+++ b/Documentation/devicetree/bindings/iio/health/max30100.txt
@@ -5,7 +5,6 @@ Maxim MAX30100 heart rate and pulse oximeter sensor
Required properties:
- compatible: must be "maxim,max30100"
- reg: the I2C address of the sensor
- - interrupt-parent: should be the phandle for the interrupt controller
- interrupts: the sole interrupt generated by the device
Refer to interrupt-controller/interrupts.txt for generic
diff --git a/Documentation/devicetree/bindings/iio/health/max30102.txt b/Documentation/devicetree/bindings/iio/health/max30102.txt
index ef2ca0a0306f..7ef7ae40ae4f 100644
--- a/Documentation/devicetree/bindings/iio/health/max30102.txt
+++ b/Documentation/devicetree/bindings/iio/health/max30102.txt
@@ -7,7 +7,6 @@ Maxim MAX30105 optical particle-sensing module
Required properties:
- compatible: must be "maxim,max30102" or "maxim,max30105"
- reg: the I2C address of the sensor
- - interrupt-parent: should be the phandle for the interrupt controller
- interrupts: the sole interrupt generated by the device
Refer to interrupt-controller/interrupts.txt for generic
diff --git a/Documentation/devicetree/bindings/iio/humidity/hts221.txt b/Documentation/devicetree/bindings/iio/humidity/hts221.txt
index 10adeb0d703d..84d029372260 100644
--- a/Documentation/devicetree/bindings/iio/humidity/hts221.txt
+++ b/Documentation/devicetree/bindings/iio/humidity/hts221.txt
@@ -13,7 +13,6 @@ Optional properties:
when it is not active, whereas a pull-up one is needed when interrupt
line is configured as IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_EDGE_FALLING.
Refer to pinctrl/pinctrl-bindings.txt for the property description.
-- interrupt-parent: should be the phandle for the interrupt controller
- interrupts: interrupt mapping for IRQ. It should be configured with
flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
IRQ_TYPE_EDGE_FALLING.
diff --git a/Documentation/devicetree/bindings/iio/imu/bmi160.txt b/Documentation/devicetree/bindings/iio/imu/bmi160.txt
index ae0112c7debc..0c1c105fb503 100644
--- a/Documentation/devicetree/bindings/iio/imu/bmi160.txt
+++ b/Documentation/devicetree/bindings/iio/imu/bmi160.txt
@@ -9,7 +9,6 @@ Required properties:
- spi-max-frequency : set maximum clock frequency (only for SPI)
Optional properties:
- - interrupt-parent : should be the phandle of the interrupt controller
- interrupts : interrupt mapping for IRQ, must be IRQ_TYPE_LEVEL_LOW
- interrupt-names : set to "INT1" if INT1 pin should be used as interrupt
input, set to "INT2" if INT2 pin should be used instead
diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
index 5f4777e8cc9e..d33c19d68de3 100644
--- a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
+++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
@@ -11,7 +11,6 @@ Required properties:
"invensense,mpu9255"
"invensense,icm20608"
- reg : the I2C address of the sensor
- - interrupt-parent : should be the phandle for the interrupt controller
- interrupts: interrupt mapping for IRQ. It should be configured with flags
IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
IRQ_TYPE_EDGE_FALLING.
diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
index ef8a8566c63f..ea2d6e0ae4c5 100644
--- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
+++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
@@ -20,7 +20,6 @@ Optional properties:
IRQ_TYPE_EDGE_RISING a pull-down resistor is needed to drive the line
when it is not active, whereas a pull-up one is needed when interrupt
line is configured as IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_EDGE_FALLING.
-- interrupt-parent: should be the phandle for the interrupt controller
- interrupts: interrupt mapping for IRQ. It should be configured with
flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
IRQ_TYPE_EDGE_FALLING.
diff --git a/Documentation/devicetree/bindings/iio/light/apds9300.txt b/Documentation/devicetree/bindings/iio/light/apds9300.txt
index d6f66c73ddbf..aa199e09a493 100644
--- a/Documentation/devicetree/bindings/iio/light/apds9300.txt
+++ b/Documentation/devicetree/bindings/iio/light/apds9300.txt
@@ -9,7 +9,6 @@ Required properties:
Optional properties:
- - interrupt-parent : should be the phandle for the interrupt controller
- interrupts : interrupt mapping for GPIO IRQ
Example:
diff --git a/Documentation/devicetree/bindings/iio/light/apds9960.txt b/Documentation/devicetree/bindings/iio/light/apds9960.txt
index 174b709f16db..3af325ad194b 100644
--- a/Documentation/devicetree/bindings/iio/light/apds9960.txt
+++ b/Documentation/devicetree/bindings/iio/light/apds9960.txt
@@ -6,7 +6,6 @@ Required properties:
- compatible: must be "avago,apds9960"
- reg: the I2c address of the sensor
- - interrupt-parent: should be the phandle for the interrupt controller
- interrupts : the sole interrupt generated by the device
Refer to interrupt-controller/interrupts.txt for generic interrupt client
diff --git a/Documentation/devicetree/bindings/iio/light/isl29018.txt b/Documentation/devicetree/bindings/iio/light/isl29018.txt
index 425ab459e209..b9bbde3e13ed 100644
--- a/Documentation/devicetree/bindings/iio/light/isl29018.txt
+++ b/Documentation/devicetree/bindings/iio/light/isl29018.txt
@@ -10,7 +10,6 @@ Required properties:
Optional properties:
- - interrupt-parent: should be the phandle for the interrupt controller
- interrupts: the sole interrupt generated by the device
Refer to interrupt-controller/interrupts.txt for generic interrupt client
diff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt
index eac30d508849..47b13eb8f4ec 100644
--- a/Documentation/devicetree/bindings/iio/light/opt3001.txt
+++ b/Documentation/devicetree/bindings/iio/light/opt3001.txt
@@ -13,7 +13,6 @@ Required properties:
- reg: the I2C address of the sensor
Optional properties:
- - interrupt-parent: should be the phandle for the interrupt controller
- interrupts: interrupt mapping for GPIO IRQ (configure for falling edge)
Example:
diff --git a/Documentation/devicetree/bindings/iio/light/tsl2583.txt b/Documentation/devicetree/bindings/iio/light/tsl2583.txt
index 8e2066c83f70..059dffa1829a 100644
--- a/Documentation/devicetree/bindings/iio/light/tsl2583.txt
+++ b/Documentation/devicetree/bindings/iio/light/tsl2583.txt
@@ -10,7 +10,6 @@ Required properties:
Optional properties:
- - interrupt-parent: should be the phandle for the interrupt controller
- interrupts: the sole interrupt generated by the device
Refer to interrupt-controller/interrupts.txt for generic interrupt client
diff --git a/Documentation/devicetree/bindings/iio/light/uvis25.txt b/Documentation/devicetree/bindings/iio/light/uvis25.txt
index 3041207e3f3c..043c139d91e6 100644
--- a/Documentation/devicetree/bindings/iio/light/uvis25.txt
+++ b/Documentation/devicetree/bindings/iio/light/uvis25.txt
@@ -5,7 +5,6 @@ Required properties:
- reg: i2c address of the sensor / spi cs line
Optional properties:
-- interrupt-parent: should be the phandle for the interrupt controller
- interrupts: interrupt mapping for IRQ. It should be configured with
flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
IRQ_TYPE_EDGE_FALLING.
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
index 9f263b7df162..fd5fca90fb39 100644
--- a/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
+++ b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
@@ -9,7 +9,6 @@ Required properties:
Optional properties:
- - interrupt-parent : phandle to the parent interrupt controller
- interrupts : interrupt mapping for GPIO IRQ
Example:
diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.txt b/Documentation/devicetree/bindings/iio/pressure/bmp085.txt
index c7198a03c906..5498b0688b6f 100644
--- a/Documentation/devicetree/bindings/iio/pressure/bmp085.txt
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.txt
@@ -12,7 +12,6 @@ Optional properties:
- temp-measurement-period: temperature measurement period (milliseconds)
- default-oversampling: default oversampling value to be used at startup,
value range is 0-3 with rising sensitivity.
-- interrupt-parent: should be the phandle for the interrupt controller
- interrupts: interrupt mapping for IRQ
- reset-gpios: a GPIO line handling reset of the sensor: as the line is
active low, it should be marked GPIO_ACTIVE_LOW (see gpio/gpio.txt)
diff --git a/Documentation/devicetree/bindings/iio/pressure/zpa2326.txt b/Documentation/devicetree/bindings/iio/pressure/zpa2326.txt
index fb85de676e03..a36ab3e0c3f7 100644
--- a/Documentation/devicetree/bindings/iio/pressure/zpa2326.txt
+++ b/Documentation/devicetree/bindings/iio/pressure/zpa2326.txt
@@ -15,8 +15,6 @@ Optional properties:
power to the sensor
- vdd-supply: an optional regulator that needs to be on to provide VDD
power to the sensor
-- interrupt-parent: phandle to the parent interrupt controller as documented in
- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
- interrupts: interrupt mapping for IRQ as documented in
Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
index b6c1afa6f02d..849115585d55 100644
--- a/Documentation/devicetree/bindings/iio/proximity/as3935.txt
+++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
@@ -6,7 +6,6 @@ Required properties:
- spi-max-frequency: specifies maximum SPI clock frequency
- spi-cpha: SPI Mode 1. Refer to spi/spi-bus.txt for generic SPI
slave node bindings.
- - interrupt-parent : should be the phandle for the interrupt controller
- interrupts : the sole interrupt generated by the device
Refer to interrupt-controller/interrupts.txt for generic
diff --git a/Documentation/devicetree/bindings/iio/proximity/sx9500.txt b/Documentation/devicetree/bindings/iio/proximity/sx9500.txt
index b301dd2b35da..c54455db3bec 100644
--- a/Documentation/devicetree/bindings/iio/proximity/sx9500.txt
+++ b/Documentation/devicetree/bindings/iio/proximity/sx9500.txt
@@ -3,7 +3,6 @@ Semtech's SX9500 capacitive proximity button device driver
Required properties:
- compatible: must be "semtech,sx9500"
- reg: i2c address where to find the device
- - interrupt-parent : should be the phandle for the interrupt controller
- interrupts : the sole interrupt generated by the device
Refer to interrupt-controller/interrupts.txt for generic
diff --git a/Documentation/devicetree/bindings/iio/sensorhub.txt b/Documentation/devicetree/bindings/iio/sensorhub.txt
index 8d57571d5c0b..b6ac0457d4ea 100644
--- a/Documentation/devicetree/bindings/iio/sensorhub.txt
+++ b/Documentation/devicetree/bindings/iio/sensorhub.txt
@@ -6,7 +6,6 @@ of a virtual sensor device.
Required properties:
- compatible: "samsung,sensorhub-rinato" or "samsung,sensorhub-thermostat"
- spi-max-frequency: max SPI clock frequency
-- interrupt-parent: interrupt parent
- interrupts: communication interrupt
- ap-mcu-gpios: [out] ap to sensorhub line - used during communication
- mcu-ap-gpios: [in] sensorhub to ap - used during communication
diff --git a/Documentation/devicetree/bindings/iio/temperature/tmp007.txt b/Documentation/devicetree/bindings/iio/temperature/tmp007.txt
index b63aba91ef03..da0af234a357 100644
--- a/Documentation/devicetree/bindings/iio/temperature/tmp007.txt
+++ b/Documentation/devicetree/bindings/iio/temperature/tmp007.txt
@@ -20,8 +20,6 @@ Required properties:
Optional properties:
- - interrupt-parent: should be the phandle for the interrupt controller
-
- interrupts: interrupt mapping for GPIO IRQ (level active low)
Example:
diff --git a/Documentation/devicetree/bindings/infiniband/hisilicon-hns-roce.txt b/Documentation/devicetree/bindings/infiniband/hisilicon-hns-roce.txt
index d3b273e4336a..84f1a1b505d2 100644
--- a/Documentation/devicetree/bindings/infiniband/hisilicon-hns-roce.txt
+++ b/Documentation/devicetree/bindings/infiniband/hisilicon-hns-roce.txt
@@ -19,7 +19,6 @@ representing a dsaf device.
- #size-cells: must be 2
Optional properties:
- dma-coherent: Present if DMA operations are coherent.
-- interrupt-parent: the interrupt parent of this device.
- interrupts: should contain 32 completion event irq,1 async event irq
and 1 event overflow irq.
- interrupt-names:should be one of 34 irqs for roce device
diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.txt b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
index 8d91ba9ff2fd..d3db65916a36 100644
--- a/Documentation/devicetree/bindings/input/cypress,cyapa.txt
+++ b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
@@ -3,8 +3,6 @@ Cypress I2C Touchpad
Required properties:
- compatible: must be "cypress,cyapa".
- reg: I2C address of the chip.
-- interrupt-parent: a phandle for the interrupt controller (see interrupt
- binding[0]).
- interrupts: interrupt to which the chip is connected (see interrupt
binding[0]).
diff --git a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
index 635f62c756ee..0c252d9306da 100644
--- a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
+++ b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
@@ -3,8 +3,6 @@ Samsung tm2-touchkey
Required properties:
- compatible: must be "cypress,tm2-touchkey"
- reg: I2C address of the chip.
-- interrupt-parent: a phandle for the interrupt controller (see interrupt
- binding[0]).
- interrupts: interrupt to which the chip is connected (see interrupt
binding[0]).
- vcc-supply : internal regulator output. 1.8V
diff --git a/Documentation/devicetree/bindings/input/e3x0-button.txt b/Documentation/devicetree/bindings/input/e3x0-button.txt
index 751665e8e47a..907b195f2eaa 100644
--- a/Documentation/devicetree/bindings/input/e3x0-button.txt
+++ b/Documentation/devicetree/bindings/input/e3x0-button.txt
@@ -7,8 +7,6 @@ This module provides a simple power button event via two interrupts.
Required properties:
- compatible: should be one of the following
- "ettus,e3x0-button": For devices such as the NI Ettus Research USRP E3x0
-- interrupt-parent:
- - a phandle to the interrupt controller that it is attached to.
- interrupts: should be one of the following
- <0 30 1>, <0 31 1>: For devices such as the NI Ettus Research USRP E3x0
- interrupt-names: should be one of the following
diff --git a/Documentation/devicetree/bindings/input/elan_i2c.txt b/Documentation/devicetree/bindings/input/elan_i2c.txt
index d80a83583238..797607460735 100644
--- a/Documentation/devicetree/bindings/input/elan_i2c.txt
+++ b/Documentation/devicetree/bindings/input/elan_i2c.txt
@@ -3,8 +3,6 @@ Elantech I2C Touchpad
Required properties:
- compatible: must be "elan,ekth3000".
- reg: I2C address of the chip.
-- interrupt-parent: a phandle for the interrupt controller (see interrupt
- binding[0]).
- interrupts: interrupt to which the chip is connected (see interrupt
binding[0]).
diff --git a/Documentation/devicetree/bindings/input/elants_i2c.txt b/Documentation/devicetree/bindings/input/elants_i2c.txt
index 8a71038f3489..5edac8be0802 100644
--- a/Documentation/devicetree/bindings/input/elants_i2c.txt
+++ b/Documentation/devicetree/bindings/input/elants_i2c.txt
@@ -3,8 +3,6 @@ Elantech I2C Touchscreen
Required properties:
- compatible: must be "elan,ekth3500".
- reg: I2C address of the chip.
-- interrupt-parent: a phandle for the interrupt controller (see interrupt
- binding[0]).
- interrupts: interrupt to which the chip is connected (see interrupt
binding[0]).
diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
index 4d3da9d91de4..f1cb9f8d7692 100644
--- a/Documentation/devicetree/bindings/input/hid-over-i2c.txt
+++ b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
@@ -14,7 +14,6 @@ Required properties:
- compatible: must be "hid-over-i2c"
- reg: i2c slave address
- hid-descr-addr: HID descriptor address
-- interrupt-parent: the phandle for the interrupt controller
- interrupts: interrupt line
Additional optional properties:
diff --git a/Documentation/devicetree/bindings/input/raydium_i2c_ts.txt b/Documentation/devicetree/bindings/input/raydium_i2c_ts.txt
index 5b6232db7c61..99a4f2ab5557 100644
--- a/Documentation/devicetree/bindings/input/raydium_i2c_ts.txt
+++ b/Documentation/devicetree/bindings/input/raydium_i2c_ts.txt
@@ -3,7 +3,6 @@ Raydium I2C touchscreen
Required properties:
- compatible: must be "raydium,rm32380"
- reg: The I2C address of the device
-- interrupt-parent: the phandle for the interrupt controller
- interrupts: interrupt to which the chip is connected
See ../interrupt-controller/interrupts.txt
Optional properties:
diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
index ec908b91fd90..dcb012f5b3ee 100644
--- a/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
+++ b/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
@@ -16,7 +16,6 @@ Required Properties:
Optional Properties:
- interrupts: interrupt which the rmi device is connected to.
-- interrupt-parent: The interrupt controller.
See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
- syna,reset-delay-ms: The number of milliseconds to wait after resetting the
diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt
index a4ca7828f21d..632f473db65b 100644
--- a/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt
+++ b/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt
@@ -16,7 +16,6 @@ Required Properties:
Optional Properties:
- interrupts: interrupt which the rmi device is connected to.
-- interrupt-parent: The interrupt controller.
See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
- spi-rx-delay-us: microsecond delay after a read transfer.
diff --git a/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt b/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt
index a3dde8c30e67..c829e18e1a05 100644
--- a/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt
+++ b/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt
@@ -9,7 +9,6 @@ This module provides a simple power button event via an Interrupt.
Required properties:
- compatible: should be one of the following
- "ti,palmas-pwrbutton": For Palmas compatible power on button
-- interrupt-parent: Parent interrupt device, must be handle of palmas node.
- interrupts: Interrupt number of power button submodule on device.
Optional Properties:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt b/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt
index 3c8614c451f2..cdd743a1f2d5 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt
@@ -5,7 +5,6 @@ Required properties:
for I2C slave, use "adi,ad7879-1"
- reg : SPI chipselect/I2C slave address
See spi-bus.txt for more SPI slave properties
-- interrupt-parent : the phandle for the interrupt controller
- interrupts : touch controller interrupt
- touchscreen-max-pressure : maximum reported pressure
- adi,resistance-plate-x : total resistance of X-plate (for pressure
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt b/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
index 9fc47b006fd1..04413da51391 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
@@ -18,7 +18,6 @@ Additional required properties:
"ti,ads7846"
"ti,ads7873"
- interrupt-parent
interrupts An interrupt node describing the IRQ line the chip's
!PENIRQ pin is connected to.
vcc-supply A regulator node for the supply voltage.
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ar1021.txt b/Documentation/devicetree/bindings/input/touchscreen/ar1021.txt
index e459e8546f34..82019bd6094e 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ar1021.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/ar1021.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible : "microchip,ar1021-i2c"
- reg : I2C slave address
-- interrupt-parent : the phandle for the interrupt controller
- interrupts : touch controller interrupt
Example:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt b/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt
index d11f8d615b5d..38b0603f65f3 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible : "chipone,icn8318"
- reg : I2C slave address of the chip (0x40)
- - interrupt-parent : a phandle pointing to the interrupt controller
- serving the interrupt for this chip
- interrupts : interrupt specification for the icn8318 interrupt
- wake-gpios : GPIO specification for the WAKE input
- touchscreen-size-x : horizontal resolution of touchscreen (in pixels)
diff --git a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
index df531b5b6a0d..2e1490a8fe74 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
@@ -7,7 +7,6 @@ Required Properties:
- xm-gpios: FET gate driver for input of X-
- yp-gpios: FET gate driver for input of Y+
- ym-gpios: FET gate driver for input of Y-
-- interrupt-parent: phandle for the interrupt controller
- interrupts: pen irq interrupt for touch detection
- pinctrl-names: "idle", "default", "gpios"
- pinctrl-0: pinctrl node for pen/touch detection state pinmux
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt b/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt
index b75d4cfd2c36..6ee274aa8b03 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt
@@ -4,8 +4,6 @@ Required properties:
- compatible : must be "cypress,cyttsp-i2c" or "cypress,cyttsp-spi"
- reg : Device I2C address or SPI chip select number
- spi-max-frequency : Maximum SPI clocking speed of the device (for cyttsp-spi)
- - interrupt-parent : the phandle for the gpio controller
- (see interrupt binding[0]).
- interrupts : (gpio) interrupt to which the chip is connected
(see interrupt binding[0]).
- bootloader-key : the 8-byte bootloader key that is required to switch
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
index 025cf8c9324a..da2dc5d6c98b 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
@@ -22,8 +22,6 @@ Required properties:
or: "focaltech,ft6236"
- reg: I2C slave address of the chip (0x38)
- - interrupt-parent: a phandle pointing to the interrupt controller
- serving the interrupt for this chip
- interrupts: interrupt specification for the touchdetect
interrupt
diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
index 298e3442f143..92fb2620f5e2 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible: must be "eeti,egalax_ts"
- reg: i2c slave address
-- interrupt-parent: the phandle for the interrupt controller
- interrupts: touch controller interrupt
- wakeup-gpios: the gpio pin to be used for waking up the controller
and also used as irq pin
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt b/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
index 5a19f4c3e9d7..94c4fc644940 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible : "elan,ektf2127"
- reg : I2C slave address of the chip (0x40)
- - interrupt-parent : a phandle pointing to the interrupt controller
- serving the interrupt for this chip
- interrupts : interrupt specification for the ektf2127 interrupt
- power-gpios : GPIO specification for the pin connected to the
ektf2127's wake input. This needs to be driven high
diff --git a/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt b/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt
index 1dcff4a43eaa..68291b94fec2 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible: must be "eeti,exc3000"
- reg: i2c slave address
-- interrupt-parent: the phandle for the interrupt controller
- interrupts: touch controller interrupt
- touchscreen-size-x: See touchscreen.txt
- touchscreen-size-y: See touchscreen.txt
diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
index abfcab3edc66..99d6f9d25335 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
@@ -8,7 +8,6 @@ Required properties:
- reg: Memory range of the device.
- interrupts: Should be the interrupt number associated with this module within
the tscadc unit (<0>).
- - interrupt-parent: Should be a phandle to the tscadc unit.
- fsl,wires: Should be '<4>' or '<5>'
Optional properties:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
index 0c369d8ebcab..f7e95c52f3c7 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
@@ -11,7 +11,6 @@ Required properties:
or "goodix,gt928"
or "goodix,gt967"
- reg : I2C address of the chip. Should be 0x5d or 0x14
- - interrupt-parent : Interrupt controller to which the chip is connected
- interrupts : Interrupt to which the chip is connected
Optional properties:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/hideep.txt b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt
index 121d9b7c79a2..b0c4cfdf7cd6 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/hideep.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible : must be "hideep,hideep-ts"
- reg : I2C slave address, (e.g. 0x6C).
-- interrupt-parent : Interrupt controller to which the chip is connected.
- interrupts : Interrupt to which the chip is connected.
Optional properties:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt
index 40ac0fe94df6..05e982c3454e 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible: must be "maxim,max11801"
- reg: i2c slave address
-- interrupt-parent: the phandle for the interrupt controller
- interrupts: touch controller interrupt
Example:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt b/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt
index 7b8944c2cb31..b2ab5498e519 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible: must be "melfas,mip4_ts"
- reg: I2C slave address of the chip (0x48 or 0x34)
-- interrupt-parent: interrupt controller to which the chip is connected
- interrupts: interrupt to which the chip is connected
Optional properties:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt
index d9b7c2ff611e..6805d10d226d 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible : must be "samsung,s6sy761"
- reg : I2C slave address, (e.g. 0x48)
-- interrupt-parent : the phandle to the interrupt controller which provides
- the interrupt
- interrupts : interrupt specification
- avdd-supply : analogic power supply
- vdd-supply : power supply
diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
index 84752de12412..d67e558e5ab5 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
@@ -8,8 +8,6 @@ Required properties:
"silead,gsl3675"
"silead,gsl3692"
- reg : I2C slave address of the chip (0x40)
-- interrupt-parent : a phandle pointing to the interrupt controller
- serving the interrupt for this chip
- interrupts : interrupt specification for the gsl1680 interrupt
- power-gpios : Specification for the pin connected to the gsl1680's
shutdown input. This needs to be driven high to take the
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sis_i2c.txt b/Documentation/devicetree/bindings/input/touchscreen/sis_i2c.txt
index d87ad14f1efe..8f5322e01024 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sis_i2c.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sis_i2c.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible: must be "sis,9200-ts"
- reg: i2c slave address
-- interrupt-parent: the phandle for the interrupt controller
- (see interrupt binding [0])
- interrupts: touch controller interrupt (see interrupt
binding [0])
diff --git a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt
index 9683595cd0f5..0a5d0cb4a280 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt
@@ -10,8 +10,6 @@ coordinates.
Required properties:
- compatible : must be "st,stmfts"
- reg : I2C slave address, (e.g. 0x49)
-- interrupt-parent : the phandle to the interrupt controller which provides
- the interrupt
- interrupts : interrupt specification
- avdd-supply : analogic power supply
- vdd-supply : power supply
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
index 5aaa6b3aa90c..4886c4aa2906 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible: must be "semtech,sx8654"
- reg: i2c slave address
-- interrupt-parent: the phandle for the interrupt controller
- interrupts: touch controller interrupt
Example:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt
index ec365e172236..ed00f61b8c08 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt
@@ -9,8 +9,6 @@ Optional properties:
- gpios: the interrupt gpio the chip is connected to (trough the penirq pin).
The penirq pin goes to low when the panel is touched.
(see GPIO binding[1] for more details).
-- interrupt-parent: the phandle for the gpio controller
- (see interrupt binding[0]).
- interrupts: (gpio) interrupt to which the chip is connected
(see interrupt binding[0]).
- ti,max-rt: maximum pressure.
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt b/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt
index fe6a1feef703..27d55a506f18 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt
@@ -3,8 +3,6 @@ Zeitec ZET6223 I2C touchscreen controller
Required properties:
- compatible : "zeitec,zet6223"
- reg : I2C slave address of the chip (0x76)
-- interrupt-parent : a phandle pointing to the interrupt controller
- serving the interrupt for this chip
- interrupts : interrupt specification for the zet6223 interrupt
Optional properties:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.txt b/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.txt
index 9d52d5afe3e9..5a4dd263fc12 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.txt
@@ -13,7 +13,6 @@ Required properties
- interrupt-congroller: Identifies the node as an interrupt controller.
- #interrupt cells: Specifies the number of cells used to encode an interrupt
source connected to this controller. The value shall be 2.
-- interrupt-parent: Specifies the parent interrupt controller.
- interrupts: Specifies the list of interrupt lines which are handled by
the interrupt controller in the parent controller's notation. Interrupts
are mapped one-to-one to parent interrupts.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt b/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt
index f6f1c14bf99b..5669764f9cc9 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt
@@ -6,7 +6,6 @@ Required properties:
- compatible: should be "al,alpine-msix"
- reg: physical base address and size of the registers
-- interrupt-parent: specifies the parent interrupt controller.
- interrupt-controller: identifies the node as an interrupt controller
- msi-controller: identifies the node as an PCI Message Signaled Interrupt
controller
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt
index 4903fb72d883..24beadf7ba83 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt
@@ -13,7 +13,6 @@ Required properties:
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The value shall be 2. The first cell is the IRQ number, the
second cell the trigger type as defined in interrupt.txt in this directory.
-- interrupt-parent: Specifies the parent interrupt controller.
- interrupts: Specifies the interrupt line (NMI) which is handled by
the interrupt controller in the parent controller's notation. This value
shall be the NMI.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
index 89674ad8a097..1502a51548bb 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
@@ -15,9 +15,6 @@ Required properties:
"amlogic,meson-gxbb-gpio-intc" for GXBB SoCs (S905) or
"amlogic,meson-gxl-gpio-intc" for GXL SoCs (S905X, S912)
"amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X)
-- interrupt-parent : a phandle to the GIC the interrupts are routed to.
- Usually this is provided at the root level of the device tree as it is
- common to most of the SoC.
- reg : Specifies base physical address and size of the registers.
- interrupt-controller : Identifies the node as an interrupt controller.
- #interrupt-cells : Specifies the number of cells needed to encode an
diff --git a/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt
index 0e9f09a6a2fe..f4c5d34c4111 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt
@@ -4,7 +4,6 @@ Required properties:
- compatible: Should be "atmel,<chip>-aic"
<chip> can be "at91rm9200", "sama5d2", "sama5d3" or "sama5d4"
- interrupt-controller: Identifies the node as an interrupt controller.
-- interrupt-parent: For single AIC system, it is an empty property.
- #interrupt-cells: The number of cells to define the interrupts. It should be 3.
The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).
The second cell is used to specify flags:
@@ -27,7 +26,6 @@ Examples:
aic: interrupt-controller@fffff000 {
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
- interrupt-parent;
#interrupt-cells = <3>;
reg = <0xfffff000 0x200>;
};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
index 6428a6ba9f4a..0f1af5a1c12e 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
@@ -26,8 +26,6 @@ Required properties:
are 0..7 for bank 0, and 0..31 for bank 1.
Additional required properties for brcm,bcm2836-armctrl-ic:
-- interrupt-parent : Specifies the parent interrupt controller when this
- controller is the second level.
- interrupts : Specifies the interrupt on the parent for this interrupt
controller to handle.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt
index 8f48aad50868..37aea40d5430 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt
@@ -18,8 +18,6 @@ Required properties:
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: specifies the number of cells needed to encode an interrupt
source, should be 1.
-- interrupt-parent: specifies the phandle to the parent interrupt controller
- this one is cascaded from
- interrupts: specifies the interrupt line in the interrupt-parent controller
node, valid values depend on the type of parent interrupt controller
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt
index 4040905388d9..2bc19b1ac877 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt
@@ -29,8 +29,6 @@ Required properties:
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: specifies the number of cells needed to encode an interrupt
source, should be 1.
-- interrupt-parent: specifies the phandle to the parent interrupt controller(s)
- this one is cascaded from
- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
node; valid values depend on the type of parent interrupt controller
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
index cc217b22dccd..2117d4ac1ae5 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
@@ -28,8 +28,6 @@ Required properties:
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: specifies the number of cells needed to encode an interrupt
source, should be 1.
-- interrupt-parent: specifies the phandle to the parent interrupt controller(s)
- this one is cascaded from
- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
node; valid values depend on the type of parent interrupt controller
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
index 44a9bb15dd56..addd86b6ca2f 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
@@ -56,8 +56,6 @@ Required properties:
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: specifies the number of cells needed to encode an interrupt
source, should be 1.
-- interrupt-parent: specifies the phandle to the parent interrupt controller
- this one is cascaded from
- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
node, valid values depend on the type of parent interrupt controller
- brcm,int-map-mask: 32-bits bit mask describing how many and which interrupts
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
index 36df06c5c567..d514ec060a4a 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
@@ -8,8 +8,6 @@ Required properties:
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: specifies the number of cells needed to encode an
interrupt source. Should be 1.
-- interrupt-parent: specifies the phandle to the parent interrupt controller
- this controller is cacaded from
- interrupts: specifies the interrupt line in the interrupt-parent irq space
to be used for cascading
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt
index a4ff93d6b7f3..454ce04d6787 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt
@@ -13,9 +13,6 @@ Required properties:
- reg: physical base address of the controller and length of memory mapped.
- interrupts: an interrupt to the parent interrupt controller.
-Optional properties:
-- interrupt-parent: the phandle to the parent interrupt controller.
-
This interrupt controller hardware is a second level interrupt controller that
is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
platforms. If interrupt-parent is not provided, the default parent interrupt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt
index 3b2f4c43ad8d..a6813a071f15 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt
@@ -68,8 +68,6 @@ Examples:
Devices connect to mbigen required properties:
----------------------------------------------------
--interrupt-parent: Specifies the mbigen device node which device connected.
-
-interrupts:Specifies the interrupt source.
For the specific information of each cell in this property,please refer to
the "interrupt-cells" description mentioned above.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt
index 5f89fb635a1b..ecebaf19d4fd 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt
@@ -11,7 +11,6 @@ Required properties:
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The value shall be 1.
-- interrupt-parent : phandle of the CPU interrupt controller.
- interrupts : Specifies the CPU interrupt the controller is connected to.
Example:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
index 3f6442c7f867..930fb462fd9f 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
@@ -26,8 +26,6 @@ Required properties:
See Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
for details about the GIC Device Tree binding.
-- interrupt-parent : Reference to the parent interrupt controller.
-
Example:
odmi: odmi@300000 {
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt
index a7efdbc3de5b..5865f4f2c69d 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt
@@ -16,8 +16,6 @@ Required properties:
and "mediatek,cirq" as a fallback.
- interrupt-controller : Identifies the node as an interrupt controller.
- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt.
-- interrupt-parent: phandle of irq parent for cirq. The parent must
- use the same interrupt-cells format as GIC.
- reg: Physical base address of the cirq registers and length of memory
mapped region.
- mediatek,ext-irq-range: Identifies external irq number range in different
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
index 07bf0b9a5139..6a32922a55b8 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
@@ -21,8 +21,6 @@ Required properties:
"mediatek,mt2701-sysirq", "mediatek,mt6577-sysirq": for MT2701
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt.
-- interrupt-parent: phandle of irq parent for sysirq. The parent must
- use the same interrupt-cells format as GIC.
- reg: Physical base address of the intpol registers and length of memory
mapped region. Could be multiple bases here. Ex: mt6797 needs 2 reg, others
need 1.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt
index b47a8a02b17b..f5baeccb689f 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt
@@ -7,7 +7,6 @@ Required properties:
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The value shall be 1.
-- interrupt-parent : phandle of the CPU interrupt controller.
- interrupts : Specifies the CPU interrupt the controller is connected to.
Example:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt
index 1099fe0788fa..803d35de9aac 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt
@@ -19,8 +19,6 @@ Required properties:
- interrupt-controller : Identifies the node as an interrupt controller.
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The value must be 3.
-- interrupt-parent : a phandle to the GIC these interrupts are routed
- to.
Notes:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt
index 38211f344dc8..0bfb3ba55f4c 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt
@@ -14,8 +14,6 @@ Required properties:
Reset value is IRQ_TYPE_LEVEL_LOW.
Optional properties:
-- interrupt-parent: empty for MIC interrupt controller, link to parent
- MIC interrupt controller for SIC1 and SIC2
- interrupts: empty for MIC interrupt controller, cascaded MIC
hardware interrupts for SIC1 and SIC2
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
index 475ae9bd562b..ad70006c1848 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
@@ -7,7 +7,6 @@ Required Properties:
- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-misc-intc" or
"qca,<soctype>-cpu-intc", "qca,ar7240-misc-intc"
- reg: Base address and size of the controllers memory area
-- interrupt-parent: phandle of the parent interrupt controller.
- interrupts: Interrupt specifier for the controllers interrupt.
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode interrupt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
index 0b2c97ddb520..8e0797cb1487 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
@@ -35,12 +35,6 @@ Properties:
interrupt.
The second element is the trigger type.
-- interrupt-parent:
- Usage: required
- Value type: <phandle>
- Definition: Specifies the interrupt parent necessary for hierarchical
- domain to operate.
-
- interrupt-controller:
Usage: required
Value type: <bool>
diff --git a/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.txt b/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.txt
index 9e5f73412cd7..19af687858a1 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.txt
@@ -32,8 +32,6 @@ Optional properties:
- samsung,combiner-nr: The number of interrupt combiners supported. If this
property is not specified, the default number of combiners is assumed
to be 16.
-- interrupt-parent: pHandle of the parent interrupt controller, if not
- inherited from the parent node.
Example:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sigma,smp8642-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/sigma,smp8642-intc.txt
index 1f441fa0ad40..355c18a3a4d3 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/sigma,smp8642-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/sigma,smp8642-intc.txt
@@ -4,7 +4,6 @@ Required properties:
- compatible: should be "sigma,smp8642-intc"
- reg: physical address of MMIO region
- ranges: address space mapping of child nodes
-- interrupt-parent: phandle of parent interrupt controller
- interrupt-controller: boolean
- #address-cells: should be <1>
- #size-cells: should be <1>
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
index 8b46a34e05f1..09fc02b99845 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
@@ -7,7 +7,6 @@ Properties:
- compatible: "snps,archs-idu-intc"
- interrupt-controller: This is an interrupt controller.
-- interrupt-parent: <reference to parent core intc>
- #interrupt-cells: Must be <1>.
Value of the cell specifies the "common" IRQ from peripheral to IDU. Number N
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
index 492911744ca3..086ff08322db 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
@@ -11,7 +11,6 @@ Required properties:
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1
- interrupts: interrupt reference to primary interrupt controller
-- interrupt-parent: (optional) reference specific primary interrupt controller
The interrupt sources map to the corresponding bits in the interrupt
registers, i.e.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt b/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt
index 8b2faefe29ca..dac0846fe789 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt
@@ -12,7 +12,6 @@ Required properties:
- interrupt-controller : Identifies the node as an interrupt controller.
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The value must be 3.
-- interrupt-parent : phandle of the GIC these interrupts are routed to.
- socionext,spi-base : The SPI number of the first SPI of the 32 adjacent
ones the EXIU forwards its interrups to.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt b/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt
index 2ab0ea39867b..a407c499b3cc 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt
@@ -31,10 +31,6 @@ Required properties:
parent) is equal to number of groups. The format of the interrupt
specifier depends in the interrupt parent controller.
- Optional properties:
- - interrupt-parent: pHandle of the parent interrupt controller, if not
- inherited from the parent node.
-
Example:
The following is an example from the SPEAr320 SoC dtsi file.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt b/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt
index 7f15f1b0325b..341ae5909333 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt
@@ -11,6 +11,4 @@ Required properties:
region
- #interrupt-cells: specifies the number of cells needed to encode an interrupt
source, should be 1.
-- interrupt-parent: phandle to the parent interrupt controller this one is
- cascaded from
- interrupts: specifies the interrupt line in the interrupt-parent controller
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,c64x+megamod-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,c64x+megamod-pic.txt
index 42bb796cc4ad..ee3f9c351501 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,c64x+megamod-pic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,c64x+megamod-pic.txt
@@ -46,7 +46,6 @@ C6X Interrupt Chips
- interrupt-controller
- #interrupt-cells: <1>
- reg: base address and size of register area
- - interrupt-parent: must be core interrupt controller
- interrupts: This should have four cells; one for each interrupt combiner.
The cells contain the core priority interrupt to which the
corresponding combiner output is wired.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
index 18d4f407bf0e..422d6908f8b2 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
@@ -12,8 +12,6 @@ Required properties:
- interrupt-controller : Identifies the node as an interrupt controller.
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The value must be 3.
-- interrupt-parent : a phandle to the GIC these interrupts are routed
- to.
Notes:
diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt
index b1682c80b490..525ec82615a6 100644
--- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt
+++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt
@@ -31,7 +31,6 @@ Required properties:
- compatible: Should be "samsung,exynos-sysmmu"
- reg: A tuple of base address and size of System MMU registers.
- #iommu-cells: Should be <0>.
-- interrupt-parent: The phandle of the interrupt controller of System MMU
- interrupts: An interrupt specifier for interrupt signal of System MMU,
according to the format defined by a particular interrupt
controller.
diff --git a/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt b/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt
index 49cfc8c337c4..c4dd93f1fed2 100644
--- a/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt
+++ b/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt
@@ -9,7 +9,6 @@ Required properties:
of cells required for the mailbox specifier. Should be 1.
Optional properties:
-- interrupt-parent : interrupt source phandle.
- interrupts : interrupt number. The interrupt specifier format
depends on the interrupt controller parent.
diff --git a/Documentation/devicetree/bindings/media/i2c/tc358743.txt b/Documentation/devicetree/bindings/media/i2c/tc358743.txt
index 49f8bcc2ea4d..59102edcf01e 100644
--- a/Documentation/devicetree/bindings/media/i2c/tc358743.txt
+++ b/Documentation/devicetree/bindings/media/i2c/tc358743.txt
@@ -12,7 +12,7 @@ Required Properties:
Optional Properties:
- reset-gpios: gpio phandle GPIO connected to the reset pin
-- interrupts, interrupt-parent: GPIO connected to the interrupt pin
+- interrupts: GPIO connected to the interrupt pin
- data-lanes: should be <1 2 3 4> for four-lane operation,
or <1 2> for two-lane operation
- clock-lanes: should be <0>
diff --git a/Documentation/devicetree/bindings/media/sh_mobile_ceu.txt b/Documentation/devicetree/bindings/media/sh_mobile_ceu.txt
index 17a8e81ca0cc..cfa4ffada8ae 100644
--- a/Documentation/devicetree/bindings/media/sh_mobile_ceu.txt
+++ b/Documentation/devicetree/bindings/media/sh_mobile_ceu.txt
@@ -2,7 +2,6 @@ Bindings, specific for the sh_mobile_ceu_camera.c driver:
- compatible: Should be "renesas,sh-mobile-ceu"
- reg: register base and size
- interrupts: the interrupt number
- - interrupt-parent: the interrupt controller
- renesas,max-width: maximum image width, supported on this SoC
- renesas,max-height: maximum image height, supported on this SoC
diff --git a/Documentation/devicetree/bindings/mfd/ac100.txt b/Documentation/devicetree/bindings/mfd/ac100.txt
index b8ef00667599..dff219f07493 100644
--- a/Documentation/devicetree/bindings/mfd/ac100.txt
+++ b/Documentation/devicetree/bindings/mfd/ac100.txt
@@ -10,7 +10,6 @@ Required properties:
- sub-nodes:
- codec
- compatible: "x-powers,ac100-codec"
- - interrupt-parent: The parent interrupt controller
- interrupts: SoC NMI / GPIO interrupt connected to the
IRQ_AUDIO pin
- #clock-cells: Shall be 0
@@ -20,9 +19,6 @@ Required properties:
- rtc
- compatible: "x-powers,ac100-rtc"
- - interrupt-parent: The parent interrupt controller
- - interrupts: SoC NMI / GPIO interrupt connected to the
- IRQ_RTC pin
- clocks: A phandle to the codec's "4M_adda" clock
- #clock-cells: Shall be 1
- clock-output-names: "cko1_rtc", "cko2_rtc", "cko3_rtc"
diff --git a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
index c8a736554b4b..a688520dd87d 100644
--- a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
+++ b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
@@ -5,7 +5,6 @@ Required parent device properties:
- spi-max-frequency : Maximum SPI frequency.
- reg : The SPI Chip Select address for the Arria10
System Resource chip
-- interrupt-parent : The parent interrupt controller.
- interrupts : The interrupt line the device is connected to.
- interrupt-controller : Marks the device node as an interrupt controller.
- #interrupt-cells : The number of cells to describe an IRQ, should be 2.
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
index a014afb07902..9b62831fdf3e 100644
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -22,7 +22,6 @@ Required properties:
connected to.
- interrupt-controller : Arizona class devices contain interrupt controllers
and may provide interrupt services to other devices.
- - interrupt-parent : The parent interrupt controller.
- #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
The first cell is the IRQ number.
The second cell is the flags, encoded as the trigger masks from
diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
index d1762f3b30af..62091f6b025e 100644
--- a/Documentation/devicetree/bindings/mfd/axp20x.txt
+++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
@@ -28,7 +28,6 @@ Required properties:
* "x-powers,axp809"
* "x-powers,axp813"
- reg: The I2C slave address or RSB hardware address for the AXP chip
-- interrupt-parent: The parent interrupt controller
- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
- interrupt-controller: The PMIC has its own internal IRQs
- #interrupt-cells: Should be set to 1
diff --git a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt
index 25d1f697eb25..8c4678650d1a 100644
--- a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt
+++ b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible : Should be "rohm,bd9571mwv".
- reg : I2C slave address.
- - interrupt-parent : Phandle to the parent interrupt controller.
- interrupts : The interrupt line the device is connected to.
- interrupt-controller : Marks the device node as an interrupt controller.
- #interrupt-cells : The number of cells to describe an IRQ, should be 2.
diff --git a/Documentation/devicetree/bindings/mfd/bfticu.txt b/Documentation/devicetree/bindings/mfd/bfticu.txt
index 65c90776c620..538192fda9ae 100644
--- a/Documentation/devicetree/bindings/mfd/bfticu.txt
+++ b/Documentation/devicetree/bindings/mfd/bfticu.txt
@@ -10,7 +10,6 @@ Required properties:
- interrupts: the main IRQ line to signal the collected IRQs
- #interrupt-cells : is 2 and their usage is compliant to the 2 cells variant
of Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-- interrupt-parent: the parent IRQ ctrl the main IRQ is connected to
- reg: access on the parent local bus (chip select, offset in chip select, size)
Example:
diff --git a/Documentation/devicetree/bindings/mfd/da9055.txt b/Documentation/devicetree/bindings/mfd/da9055.txt
index 6dab34d34fce..131a53283e17 100644
--- a/Documentation/devicetree/bindings/mfd/da9055.txt
+++ b/Documentation/devicetree/bindings/mfd/da9055.txt
@@ -22,8 +22,6 @@ Documentation/devicetree/bindings/sound/da9055.txt
Required properties:
- compatible : Should be "dlg,da9055-pmic"
- reg: Specifies the I2C slave address (defaults to 0x5a but can be modified)
-- interrupt-parent: Specifies the phandle of the interrupt controller to which
- the IRQs from da9055 are delivered to.
- interrupts: IRQ line info for da9055 chip.
- interrupt-controller: da9055 has internal IRQs (has own IRQ domain).
- #interrupt-cells: Should be 1, is the local IRQ number for da9055.
diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt
index c0a418c27e9d..edca653a5777 100644
--- a/Documentation/devicetree/bindings/mfd/da9062.txt
+++ b/Documentation/devicetree/bindings/mfd/da9062.txt
@@ -32,8 +32,6 @@ Required properties:
"dlg,da9061" for DA9061
- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
modified to match the chip's OTP settings).
-- interrupt-parent : Specifies the reference to the interrupt controller for
- the DA9062 or DA9061.
- interrupts : IRQ line information.
- interrupt-controller
diff --git a/Documentation/devicetree/bindings/mfd/da9063.txt b/Documentation/devicetree/bindings/mfd/da9063.txt
index 443e68286957..8da879935c59 100644
--- a/Documentation/devicetree/bindings/mfd/da9063.txt
+++ b/Documentation/devicetree/bindings/mfd/da9063.txt
@@ -16,8 +16,6 @@ Required properties:
- compatible : Should be "dlg,da9063" or "dlg,da9063l"
- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
modified to match the chip's OTP settings).
-- interrupt-parent : Specifies the reference to the interrupt controller for
- the DA9063.
- interrupts : IRQ line information.
- interrupt-controller
diff --git a/Documentation/devicetree/bindings/mfd/da9150.txt b/Documentation/devicetree/bindings/mfd/da9150.txt
index fd4dca7f4aba..f09b41fbdf47 100644
--- a/Documentation/devicetree/bindings/mfd/da9150.txt
+++ b/Documentation/devicetree/bindings/mfd/da9150.txt
@@ -13,8 +13,6 @@ da9150-fg : Battery Fuel-Gauge
Required properties:
- compatible : Should be "dlg,da9150"
- reg: Specifies the I2C slave address
-- interrupt-parent: Specifies the phandle of the interrupt controller to which
- the IRQs from da9150 are delivered to.
- interrupts: IRQ line info for da9150 chip.
- interrupt-controller: da9150 has internal IRQs (own IRQ domain).
(See ../interrupt-controller/interrupts.txt for
diff --git a/Documentation/devicetree/bindings/mfd/max14577.txt b/Documentation/devicetree/bindings/mfd/max14577.txt
index 236264c10b92..fc6f0f4e8beb 100644
--- a/Documentation/devicetree/bindings/mfd/max14577.txt
+++ b/Documentation/devicetree/bindings/mfd/max14577.txt
@@ -11,7 +11,6 @@ Required properties:
- compatible : Must be "maxim,max14577" or "maxim,max77836".
- reg : I2C slave address for the max14577 chip (0x25 for max14577/max77836)
- interrupts : IRQ line for the chip.
-- interrupt-parent : The parent interrupt controller.
Required nodes:
diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
index 0f2587fa42cb..42968b7144e0 100644
--- a/Documentation/devicetree/bindings/mfd/max77686.txt
+++ b/Documentation/devicetree/bindings/mfd/max77686.txt
@@ -15,7 +15,6 @@ Required properties:
- compatible : Must be "maxim,max77686";
- reg : Specifies the i2c slave address of PMIC block.
- interrupts : This i2c device has an IRQ line connected to the main SoC.
-- interrupt-parent : The parent interrupt controller.
Example:
diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt
index e6754974a745..a3c60a7a3be1 100644
--- a/Documentation/devicetree/bindings/mfd/max77693.txt
+++ b/Documentation/devicetree/bindings/mfd/max77693.txt
@@ -14,7 +14,6 @@ Required properties:
- compatible : Must be "maxim,max77693".
- reg : Specifies the i2c slave address of PMIC block.
- interrupts : This i2c device has an IRQ line connected to the main SoC.
-- interrupt-parent : The parent interrupt controller.
Optional properties:
- regulators : The regulators of max77693 have to be instantiated under subnode
diff --git a/Documentation/devicetree/bindings/mfd/max77802.txt b/Documentation/devicetree/bindings/mfd/max77802.txt
index f2f3fe75901c..09decac20d91 100644
--- a/Documentation/devicetree/bindings/mfd/max77802.txt
+++ b/Documentation/devicetree/bindings/mfd/max77802.txt
@@ -14,7 +14,6 @@ Required properties:
- compatible : Must be "maxim,max77802"
- reg : Specifies the I2C slave address of PMIC block.
- interrupts : I2C device IRQ line connected to the main SoC.
-- interrupt-parent : The parent interrupt controller.
Example:
diff --git a/Documentation/devicetree/bindings/mfd/max8998.txt b/Documentation/devicetree/bindings/mfd/max8998.txt
index 23a3650ff2a2..5f2f07c09c90 100644
--- a/Documentation/devicetree/bindings/mfd/max8998.txt
+++ b/Documentation/devicetree/bindings/mfd/max8998.txt
@@ -20,8 +20,6 @@ Required properties:
- reg: Specifies the i2c slave address of the pmic block. It should be 0x66.
Optional properties:
-- interrupt-parent: Specifies the phandle of the interrupt controller to which
- the interrupts from MAX8998 are routed to.
- interrupts: Interrupt specifiers for two interrupt sources.
- First interrupt specifier is for main interrupt.
- Second interrupt specifier is for power-on/-off interrupt.
diff --git a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
index c639705a98ef..5ddcc8f4febc 100644
--- a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
+++ b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
@@ -3,7 +3,6 @@ Motorola CPCAP PMIC device tree binding
Required properties:
- compatible : One or both of "motorola,cpcap" or "ste,6556002"
- reg : SPI chip select
-- interrupt-parent : The parent interrupt controller
- interrupts : The interrupt line the device is connected to
- interrupt-controller : Marks the device node as an interrupt controller
- #interrupt-cells : The number of cells to describe an IRQ, should be 2
diff --git a/Documentation/devicetree/bindings/mfd/palmas.txt b/Documentation/devicetree/bindings/mfd/palmas.txt
index 8ae1a32bfb7e..e736ab3012a6 100644
--- a/Documentation/devicetree/bindings/mfd/palmas.txt
+++ b/Documentation/devicetree/bindings/mfd/palmas.txt
@@ -25,7 +25,6 @@ and also the generic series names
The first cell is the IRQ number.
The second cell is the flags, encoded as the trigger masks from
Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-- interrupt-parent : The parent interrupt controller.
Optional properties:
ti,mux-padX : set the pad register X (1-2) to the correct muxing for the
diff --git a/Documentation/devicetree/bindings/mfd/retu.txt b/Documentation/devicetree/bindings/mfd/retu.txt
index 876242394a16..df3005dd3e3c 100644
--- a/Documentation/devicetree/bindings/mfd/retu.txt
+++ b/Documentation/devicetree/bindings/mfd/retu.txt
@@ -9,7 +9,6 @@ Required properties:
- compatible: "nokia,retu" or "nokia,tahvo"
- reg: Specifies the CBUS slave address of the ASIC chip
- interrupts: The interrupt line the device is connected to
-- interrupt-parent: The parent interrupt controller
Example:
diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
index 91b65227afeb..1683ec3245bc 100644
--- a/Documentation/devicetree/bindings/mfd/rk808.txt
+++ b/Documentation/devicetree/bindings/mfd/rk808.txt
@@ -10,7 +10,6 @@ Required properties:
- compatible: "rockchip,rk808"
- compatible: "rockchip,rk818"
- reg: I2C slave address
-- interrupt-parent: The parent interrupt controller.
- interrupts: the interrupt outputs of the controller.
- #clock-cells: from common clock binding; shall be set to 1 (multiple clock
outputs). See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
diff --git a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
index cdd079bfc287..c68cdd365153 100644
--- a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
+++ b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
@@ -31,8 +31,6 @@ Required properties:
- reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
Optional properties:
- - interrupt-parent: Specifies the phandle of the interrupt controller to which
- the interrupts from s2mps11 are delivered to.
- interrupts: Interrupt specifiers for interrupt sources.
- samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled
down. When the system is suspended it will always go down thus triggerring
diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt
index f9065a5781a2..c797c05cd3c2 100644
--- a/Documentation/devicetree/bindings/mfd/stmpe.txt
+++ b/Documentation/devicetree/bindings/mfd/stmpe.txt
@@ -10,7 +10,6 @@ Required properties:
Optional properties:
- interrupts : The interrupt outputs from the controller
- interrupt-controller : Marks the device node as an interrupt controller
- - interrupt-parent : Specifies which IRQ controller we're connected to
- wakeup-source : Marks the input device as wakable
- st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024
- irq-gpio : If present, which GPIO to use for event IRQ
diff --git a/Documentation/devicetree/bindings/mfd/tc3589x.txt b/Documentation/devicetree/bindings/mfd/tc3589x.txt
index 23fc2f21f5a4..4f22b2b07dc5 100644
--- a/Documentation/devicetree/bindings/mfd/tc3589x.txt
+++ b/Documentation/devicetree/bindings/mfd/tc3589x.txt
@@ -15,7 +15,6 @@ Required properties:
- compatible : must be "toshiba,tc35890", "toshiba,tc35892", "toshiba,tc35893",
"toshiba,tc35894", "toshiba,tc35895" or "toshiba,tc35896"
- reg : I2C address of the device
- - interrupt-parent : specifies which IRQ controller we're connected to
- interrupts : the interrupt on the parent the controller is connected to
- interrupt-controller : marks the device node as an interrupt controller
- #interrupt-cells : should be <1>, the first cell is the IRQ offset on this
diff --git a/Documentation/devicetree/bindings/mfd/tps65086.txt b/Documentation/devicetree/bindings/mfd/tps65086.txt
index 9cfa886fe99f..67eac0ed32df 100644
--- a/Documentation/devicetree/bindings/mfd/tps65086.txt
+++ b/Documentation/devicetree/bindings/mfd/tps65086.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible : Should be "ti,tps65086".
- reg : I2C slave address.
- - interrupt-parent : Phandle to the parent interrupt controller.
- interrupts : The interrupt line the device is connected to.
- interrupt-controller : Marks the device node as an interrupt controller.
- #interrupt-cells : The number of cells to describe an IRQ, should be 2.
diff --git a/Documentation/devicetree/bindings/mfd/tps65912.txt b/Documentation/devicetree/bindings/mfd/tps65912.txt
index 717e66d23142..8becb183a48e 100644
--- a/Documentation/devicetree/bindings/mfd/tps65912.txt
+++ b/Documentation/devicetree/bindings/mfd/tps65912.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible : Should be "ti,tps65912".
- reg : Slave address or chip select number (I2C / SPI).
- - interrupt-parent : The parent interrupt controller.
- interrupts : The interrupt line the device is connected to.
- interrupt-controller : Marks the device node as an interrupt controller.
- #interrupt-cells : The number of cells to describe an IRQ, should be 2.
diff --git a/Documentation/devicetree/bindings/mfd/twl-familly.txt b/Documentation/devicetree/bindings/mfd/twl-familly.txt
index a66fcf946759..56f244b5d8a4 100644
--- a/Documentation/devicetree/bindings/mfd/twl-familly.txt
+++ b/Documentation/devicetree/bindings/mfd/twl-familly.txt
@@ -16,7 +16,6 @@ Required properties:
- interrupt-controller : Since the twl support several interrupts internally,
it is considered as an interrupt controller cascaded to the SoC one.
- #interrupt-cells = <1>;
-- interrupt-parent : The parent interrupt controller.
Optional node:
- Child nodes contain in the twl. The twl family is made of several variants
diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt b/Documentation/devicetree/bindings/mfd/twl6040.txt
index 9a98ee7c323d..06e9dd7a0d96 100644
--- a/Documentation/devicetree/bindings/mfd/twl6040.txt
+++ b/Documentation/devicetree/bindings/mfd/twl6040.txt
@@ -9,7 +9,6 @@ Required properties:
- compatible : "ti,twl6040" for twl6040, "ti,twl6041" for twl6041
- reg: must be 0x4b for i2c address
- interrupts: twl6040 has one interrupt line connecteded to the main SoC
-- interrupt-parent: The parent interrupt controller
- gpio-controller:
- #gpio-cells = <1>: twl6040 provides GPO lines.
- #clock-cells = <0>; twl6040 is a provider of pdmclk which is used by McPDM
diff --git a/Documentation/devicetree/bindings/mfd/wm831x.txt b/Documentation/devicetree/bindings/mfd/wm831x.txt
index 505709403d3f..6b84b1b0d018 100644
--- a/Documentation/devicetree/bindings/mfd/wm831x.txt
+++ b/Documentation/devicetree/bindings/mfd/wm831x.txt
@@ -22,7 +22,6 @@ Required properties:
- interrupts : The interrupt line the IRQ signal for the device is
connected to.
- - interrupt-parent : The parent interrupt controller.
- interrupt-controller : wm831x devices contain interrupt controllers and
may provide interrupt services to other devices.
diff --git a/Documentation/devicetree/bindings/mips/cavium/cib.txt b/Documentation/devicetree/bindings/mips/cavium/cib.txt
index f39a1aa2852b..410efa322254 100644
--- a/Documentation/devicetree/bindings/mips/cavium/cib.txt
+++ b/Documentation/devicetree/bindings/mips/cavium/cib.txt
@@ -13,8 +13,6 @@ Properties:
- cavium,max-bits: The index (zero based) of the highest numbered bit
in the CIB block.
-- interrupt-parent: Always the CIU on the SoC.
-
- interrupts: The CIU line to which the CIB block is connected.
- #interrupt-cells: Must be <2>. The first cell is the bit within the
diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
index 60481bfc3d31..5f3c02522c17 100644
--- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
@@ -19,8 +19,6 @@ Required Properties:
- clocks: From clock bindings: Handles to clock inputs.
- clock-names: From clock bindings: Tuple including "clk_xin" and "clk_ahb"
- interrupts: Interrupt specifier
- - interrupt-parent: Phandle for the interrupt controller that services
- interrupts for this device.
Required Properties for "arasan,sdhci-5.1":
- phys: From PHY bindings: Phandle for the Generic PHY for arasan.
diff --git a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
index a2cf5e1c87d8..99c5cf8507e8 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
@@ -21,7 +21,6 @@ Required properties:
"fsl,ls1043a-esdhc"
"fsl,ls1046a-esdhc"
"fsl,ls2080a-esdhc"
- - interrupt-parent : interrupt source phandle.
- clock-frequency : specifies eSDHC base clock frequency.
Optional properties:
diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
index 0e5e2ec4001d..75486cca8054 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
@@ -13,8 +13,6 @@ Optional properties:
- gpios : may specify GPIOs in this order: Card-Detect GPIO,
Write-Protect GPIO. Note that this does not follow the
binding from mmc.txt, for historical reasons.
-- interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
Example:
diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
index b40f3a492800..bcda1dfc4bac 100644
--- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
+++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
@@ -42,7 +42,6 @@ Required properties:
May be "nand", if the SoC has the individual NAND
interrupts multiplexed behind another custom piece of
hardware
-- interrupt-parent : See standard interrupt bindings
- #address-cells : <1> - subnodes give the chip-select number
- #size-cells : <0>
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index dd559045593d..c059ab74ed88 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -16,7 +16,6 @@ Required properties:
- compatible: "ti,omap2-nand"
- reg: range id (CS number), base offset and length of the
NAND I/O space
- - interrupt-parent: must point to gpmc node
- interrupts: Two interrupt specifiers, one for fifoevent, one for termcount.
Optional properties:
diff --git a/Documentation/devicetree/bindings/mtd/spear_smi.txt b/Documentation/devicetree/bindings/mtd/spear_smi.txt
index 7248aadd89e4..c41873e92d26 100644
--- a/Documentation/devicetree/bindings/mtd/spear_smi.txt
+++ b/Documentation/devicetree/bindings/mtd/spear_smi.txt
@@ -5,8 +5,6 @@ Required properties:
- reg : Address range of the mtd chip
- #address-cells, #size-cells : Must be present if the device has sub-nodes
representing partitions.
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the STMMAC interrupts
- clock-rate : Functional clock rate of SMI in Hz
diff --git a/Documentation/devicetree/bindings/net/amd-xgbe.txt b/Documentation/devicetree/bindings/net/amd-xgbe.txt
index 4bb624a73b54..93dcb79a5f16 100644
--- a/Documentation/devicetree/bindings/net/amd-xgbe.txt
+++ b/Documentation/devicetree/bindings/net/amd-xgbe.txt
@@ -8,8 +8,6 @@ Required properties:
- SerDes Rx/Tx registers
- SerDes integration registers (1/2)
- SerDes integration registers (2/2)
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the amd-xgbe interrupt(s). The first interrupt
listed is required and is the general device interrupt. If the optional
amd,per-channel-interrupt property is specified, then one additional
diff --git a/Documentation/devicetree/bindings/net/btusb.txt b/Documentation/devicetree/bindings/net/btusb.txt
index 9c5e663fa1af..37d67926dd6d 100644
--- a/Documentation/devicetree/bindings/net/btusb.txt
+++ b/Documentation/devicetree/bindings/net/btusb.txt
@@ -15,7 +15,6 @@ Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
Optional properties:
- - interrupt-parent: phandle of the parent interrupt controller
- interrupt-names: (see below)
- interrupts : The interrupt specified by the name "wakeup" is the interrupt
that shall be used for out-of-band wake-on-bt. Driver will
diff --git a/Documentation/devicetree/bindings/net/can/holt_hi311x.txt b/Documentation/devicetree/bindings/net/can/holt_hi311x.txt
index 23aa94eab207..903a78da65be 100644
--- a/Documentation/devicetree/bindings/net/can/holt_hi311x.txt
+++ b/Documentation/devicetree/bindings/net/can/holt_hi311x.txt
@@ -5,7 +5,6 @@ Required properties:
- "holt,hi3110" for HI-3110
- reg: SPI chip select.
- clocks: The clock feeding the CAN controller.
- - interrupt-parent: The parent interrupt controller.
- interrupts: Should contain IRQ line for the CAN controller.
Optional properties:
diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
index ee3723beb701..188c8bd4eb67 100644
--- a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
+++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
@@ -6,7 +6,6 @@ Required properties:
- "microchip,mcp2515" for MCP2515.
- reg: SPI chip select.
- clocks: The clock feeding the CAN controller.
- - interrupt-parent: The parent interrupt controller.
- interrupts: Should contain IRQ line for the CAN controller.
Optional properties:
diff --git a/Documentation/devicetree/bindings/net/can/xilinx_can.txt b/Documentation/devicetree/bindings/net/can/xilinx_can.txt
index fe38847d8e26..9264d2f6a89d 100644
--- a/Documentation/devicetree/bindings/net/can/xilinx_can.txt
+++ b/Documentation/devicetree/bindings/net/can/xilinx_can.txt
@@ -9,7 +9,6 @@ Required properties:
CANPS registers map.
- interrupts : Property with a value describing the interrupt
number.
-- interrupt-parent : Must be core interrupt controller
- clock-names : List of input clock names - "can_clk", "pclk"
(For CANPS), "can_clk" , "s_axi_aclk"(For AXI CAN)
(See clock bindings for details).
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index 4cb4925a28ab..41089369f891 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -11,7 +11,6 @@ Required properties:
registers map
- interrupts : property with a value describing the interrupt
number
-- interrupt-parent : The parent interrupt controller
- cpdma_channels : Specifies number of channels in CPDMA
- ale_entries : Specifies No of entries ALE can hold
- bd_ram_size : Specifies internal descriptor RAM size
diff --git a/Documentation/devicetree/bindings/net/davicom-dm9000.txt b/Documentation/devicetree/bindings/net/davicom-dm9000.txt
index 5224bf05f6f8..64c159e9cbf7 100644
--- a/Documentation/devicetree/bindings/net/davicom-dm9000.txt
+++ b/Documentation/devicetree/bindings/net/davicom-dm9000.txt
@@ -5,7 +5,6 @@ Required properties:
- reg : physical addresses and sizes of registers, must contain 2 entries:
first entry : address register,
second entry : data register.
-- interrupt-parent : interrupt controller to which the device is connected
- interrupts : interrupt specifier specific to interrupt controller
Optional properties:
diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt
index 60d50a2b0323..feb007af13cb 100644
--- a/Documentation/devicetree/bindings/net/dsa/marvell.txt
+++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt
@@ -30,7 +30,6 @@ Required properties:
Optional properties:
- reset-gpios : Should be a gpio specifier for a reset line
-- interrupt-parent : Parent interrupt controller
- interrupts : Interrupt from the switch
- interrupt-controller : Indicates the switch is itself an interrupt
controller. This is used for the PHY interrupts.
diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
index abfbeecbcf39..8ee4b1cedae8 100644
--- a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
+++ b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
@@ -9,7 +9,6 @@ Required properties:
"6port-16rss",
"6port-16vf",
"single-port".
-- interrupt-parent: the interrupt parent of this device.
- interrupts: should contain the DSA Fabric and rcb interrupt.
- reg: specifies base physical address(es) and size of the device registers.
The first region is external interface control register base and size(optional,
diff --git a/Documentation/devicetree/bindings/net/ibm,emac.txt b/Documentation/devicetree/bindings/net/ibm,emac.txt
index 44b842b6ca15..c0c14aa3f97c 100644
--- a/Documentation/devicetree/bindings/net/ibm,emac.txt
+++ b/Documentation/devicetree/bindings/net/ibm,emac.txt
@@ -18,7 +18,6 @@
"ibm,emac4". For Axon, thus, we have: "ibm,emac-axon",
"ibm,emac4"
- interrupts : <interrupt mapping for EMAC IRQ and WOL IRQ>
- - interrupt-parent : optional, if needed for interrupt mapping
- reg : <registers mapping>
- local-mac-address : 6 bytes, MAC address
- mal-device : phandle of the associated McMAL node
diff --git a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
index 3d27c68613a6..957e5e5c2927 100644
--- a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
+++ b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
@@ -22,7 +22,6 @@ Optional properties:
- marvell,wakeup-gap-ms: wakeup gap represents wakeup latency of the host
platform. The value will be configured to firmware. This
is needed to work chip's sleep feature as expected (u16).
- - interrupt-parent: phandle of the parent interrupt controller
- interrupt-names: Used only for USB based devices (See below)
- interrupts : specifies the interrupt pin number to the cpu. For SDIO, the
driver will use the first interrupt specified in the interrupt
diff --git a/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt b/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt
index aa6313024176..358fed2fab43 100644
--- a/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt
+++ b/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt
@@ -6,8 +6,6 @@ The mediatek gigabit switch can be found on Mediatek SoCs (mt7620, mt7621).
Required properties:
- compatible: Should be "mediatek,mt7620-gsw" or "mediatek,mt7621-gsw"
- reg: Address and length of the register set for the device
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the gigabit switches interrupt
- resets: Should contain the gigabit switches resets
- reset-names: Should contain the reset names "gsw"
diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt
index 53c13ee384a4..503f2b9194e2 100644
--- a/Documentation/devicetree/bindings/net/mediatek-net.txt
+++ b/Documentation/devicetree/bindings/net/mediatek-net.txt
@@ -30,9 +30,6 @@ Required properties:
- mediatek,pctl: phandle to the syscon node that handles the ports slew rate
and driver current: only for MT2701 and MT7623 SoC
-Optional properties:
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
* Ethernet MAC node
Required properties:
diff --git a/Documentation/devicetree/bindings/net/microchip,enc28j60.txt b/Documentation/devicetree/bindings/net/microchip,enc28j60.txt
index 44dff53d4dda..24626e082b83 100644
--- a/Documentation/devicetree/bindings/net/microchip,enc28j60.txt
+++ b/Documentation/devicetree/bindings/net/microchip,enc28j60.txt
@@ -8,9 +8,6 @@ the SPI master node.
Required properties:
- compatible: Should be "microchip,enc28j60"
- reg: Specify the SPI chip select the ENC28J60 is wired to
-- interrupt-parent: Specify the phandle of the source interrupt, see interrupt
- binding documentation for details. Usually this is the GPIO bank
- the interrupt line is wired to.
- interrupts: Specify the interrupt index within the interrupt controller (referred
to above in interrupt-parent) and interrupt type. The ENC28J60 natively
generates falling edge interrupts, however, additional board logic
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
index 92486733df71..cfaf88998918 100644
--- a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
+++ b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
@@ -4,7 +4,6 @@ Required properties:
- compatible: Should be "nxp,nxp-nci-i2c".
- clock-frequency: I²C work frequency.
- reg: address on the bus
-- interrupt-parent: phandle for the interrupt gpio controller
- interrupts: GPIO interrupt to which the chip is connected
- enable-gpios: Output GPIO pin used for enabling/disabling the chip
- firmware-gpios: Output GPIO pin used to enter firmware download mode
diff --git a/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt b/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt
index 122460e42e3c..2efe3886b95b 100644
--- a/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt
+++ b/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt
@@ -4,7 +4,6 @@ Required properties:
- compatible: Should be "nxp,pn532-i2c" or "nxp,pn533-i2c".
- clock-frequency: I²C work frequency.
- reg: address on the bus
-- interrupt-parent: phandle for the interrupt gpio controller
- interrupts: GPIO interrupt to which the chip is connected
Optional SoC Specific Properties:
diff --git a/Documentation/devicetree/bindings/net/nfc/pn544.txt b/Documentation/devicetree/bindings/net/nfc/pn544.txt
index 538a86f7b2b0..5b937403fed6 100644
--- a/Documentation/devicetree/bindings/net/nfc/pn544.txt
+++ b/Documentation/devicetree/bindings/net/nfc/pn544.txt
@@ -4,7 +4,6 @@ Required properties:
- compatible: Should be "nxp,pn544-i2c".
- clock-frequency: I²C work frequency.
- reg: address on the bus
-- interrupt-parent: phandle for the interrupt gpio controller
- interrupts: GPIO interrupt to which the chip is connected
- enable-gpios: Output GPIO pin used for enabling/disabling the PN544
- firmware-gpios: Output GPIO pin used to enter firmware download mode
diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
index ed5b3eaadb39..f02f6fb7f81c 100644
--- a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
+++ b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible: Should be "samsung,s3fwrn5-i2c".
- reg: address on the bus
-- interrupt-parent: phandle for the interrupt gpio controller
- interrupts: GPIO interrupt to which the chip is connected
- s3fwrn5,en-gpios: Output GPIO pin used for enabling/disabling the chip
- s3fwrn5,fw-gpios: Output GPIO pin used to enter firmware mode and
diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt
index b46d473be425..baa8f8133d19 100644
--- a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt
+++ b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt
@@ -4,7 +4,6 @@ Required properties:
- compatible: Should be "st,st21nfcb-i2c" or "st,st21nfcc-i2c".
- clock-frequency: I²C work frequency.
- reg: address on the bus
-- interrupt-parent: phandle for the interrupt gpio controller
- interrupts: GPIO interrupt to which the chip is connected
- reset-gpios: Output GPIO pin used to reset the ST21NFCB
diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt
index 54ce8e7ac681..d33343330b94 100644
--- a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt
+++ b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible: Should be "st,st21nfcb-spi"
- spi-max-frequency: Maximum SPI frequency (<= 4000000).
-- interrupt-parent: phandle for the interrupt gpio controller
- interrupts: GPIO interrupt to which the chip is connected
- reset-gpios: Output GPIO pin used to reset the ST21NFCB
diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
index 5ee9440fa9ad..b8bd90f80e12 100644
--- a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
+++ b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
@@ -4,8 +4,6 @@ Required properties:
- compatible: Should be "st,st21nfca-i2c".
- clock-frequency: I²C work frequency.
- reg: address on the bus
-- interrupt-parent: phandle for the interrupt gpio controller
-- interrupts: GPIO interrupt to which the chip is connected
- enable-gpios: Output GPIO pin used for enabling/disabling the ST21NFCA
Optional SoC Specific Properties:
diff --git a/Documentation/devicetree/bindings/net/nfc/st95hf.txt b/Documentation/devicetree/bindings/net/nfc/st95hf.txt
index 08a202e00d47..3f373a1e20ff 100644
--- a/Documentation/devicetree/bindings/net/nfc/st95hf.txt
+++ b/Documentation/devicetree/bindings/net/nfc/st95hf.txt
@@ -17,9 +17,6 @@ Required properties:
- enable-gpio: GPIO line to enable ST95HF transceiver.
-- interrupt-parent : Standard way to specify the controller to which
- ST95HF transceiver's interrupt is routed.
-
- interrupts : Standard way to define ST95HF transceiver's out
interrupt.
diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
index 5ca9362ef127..ba1934b950e5 100644
--- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
+++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible: Should be "ti,trf7970a".
- spi-max-frequency: Maximum SPI frequency (<= 2000000).
-- interrupt-parent: phandle of parent interrupt handler.
- interrupts: A single interrupt specifier.
- ti,enable-gpios: One or two GPIO entries used for 'EN' and 'EN2' pins on the
TRF7970A. EN2 is optional.
diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index d2169a56f5e3..17c1d2bd00f6 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -3,8 +3,6 @@ PHY nodes
Required properties:
- interrupts : interrupt specifier for the sole interrupt.
- - interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
- reg : The ID number for the phy, usually a small integer
Optional Properties:
diff --git a/Documentation/devicetree/bindings/net/qca,qca7000.txt b/Documentation/devicetree/bindings/net/qca,qca7000.txt
index 3987846b3fd3..e4a8a51086df 100644
--- a/Documentation/devicetree/bindings/net/qca,qca7000.txt
+++ b/Documentation/devicetree/bindings/net/qca,qca7000.txt
@@ -19,7 +19,6 @@ Required properties:
- spi-cpol : Must be set
Optional properties:
-- interrupt-parent : Specify the pHandle of the source interrupt
- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at.
Numbers smaller than 1000000 or greater than 16000000
are invalid. Missing the property will set the SPI
diff --git a/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt b/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt
index 88b095d1f13b..9fe1a0a22e44 100644
--- a/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt
+++ b/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt
@@ -14,8 +14,6 @@ Required properties:
"ralink,rt3050-eth", "ralink,rt3883-eth", "ralink,rt5350-eth",
"mediatek,mt7620-eth", "mediatek,mt7621-eth"
- reg: Address and length of the register set for the device
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the frame engines interrupt
- resets: Should contain the frame engines resets
- reset-names: Should contain the reset names "fe". If a switch is present
diff --git a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt b/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
index 2e79bd376c56..87e315856efa 100644
--- a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
+++ b/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
@@ -7,8 +7,6 @@ SoCs (RT3x5x, RT5350, MT76x8).
Required properties:
- compatible: Should be "ralink,rt3050-esw"
- reg: Address and length of the register set for the device
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the embedded switches interrupt
- resets: Should contain the embedded switches resets
- reset-names: Should contain the reset names "esw"
diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt
index fac897d54423..19740d01cab0 100644
--- a/Documentation/devicetree/bindings/net/renesas,ravb.txt
+++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt
@@ -47,8 +47,6 @@ Required properties:
- pinctrl-0: phandle, referring to a default pin configuration node.
Optional properties:
-- interrupt-parent: the phandle for the interrupt controller that services
- interrupts for this device.
- interrupt-names: A list of interrupt names.
For the R-Car Gen 3 SoCs this property is mandatory;
it should include one entry per channel, named "ch%u",
diff --git a/Documentation/devicetree/bindings/net/samsung-sxgbe.txt b/Documentation/devicetree/bindings/net/samsung-sxgbe.txt
index 888c250197fe..46e591178911 100644
--- a/Documentation/devicetree/bindings/net/samsung-sxgbe.txt
+++ b/Documentation/devicetree/bindings/net/samsung-sxgbe.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible: Should be "samsung,sxgbe-v2.0a"
- reg: Address and length of the register set for the device
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the SXGBE interrupts
These interrupts are ordered by fixed and follows variable
trasmit DMA interrupts, receive DMA interrupts and lpi interrupt.
diff --git a/Documentation/devicetree/bindings/net/sh_eth.txt b/Documentation/devicetree/bindings/net/sh_eth.txt
index 82a4cf2c145d..76db9f13ad96 100644
--- a/Documentation/devicetree/bindings/net/sh_eth.txt
+++ b/Documentation/devicetree/bindings/net/sh_eth.txt
@@ -35,8 +35,6 @@ Required properties:
- pinctrl-0: phandle, referring to a default pin configuration node.
Optional properties:
-- interrupt-parent: the phandle for the interrupt controller that services
- interrupts for this device.
- pinctrl-names: pin configuration state name ("default").
- renesas,no-ether-link: boolean, specify when a board does not provide a proper
Ether LINK signal.
diff --git a/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt b/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt
index 21d27aa4c68c..36f1aef585f0 100644
--- a/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt
+++ b/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt
@@ -83,8 +83,6 @@ Required properties:
- "snps,dwc-qos-ethernet-4.10" (deprecated):
- "phy_ref_clk"
- "apb_clk"
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the core's combined interrupt signal
- phy-mode: See ethernet.txt file in the same directory
- resets: Phandle and reset specifiers for each entry in reset-names, in the
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index 3a28a5d8857d..8bdb1c231d08 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -4,8 +4,6 @@ Required properties:
- compatible: Should be "snps,dwmac-<ip_version>", "snps,dwmac"
For backwards compatibility: "st,spear600-gmac" is also supported.
- reg: Address and length of the register set for the device
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the STMMAC interrupts
- interrupt-names: Should contain a list of interrupt names corresponding to
the interrupts in the interrupts property, if available.
diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
index 86602f264dce..cffb2d6876e3 100644
--- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
+++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
@@ -11,8 +11,6 @@ Required properties:
Optional properties:
- brcm,drive-strength : drive strength used for SDIO pins on device in mA
(default = 6).
- - interrupt-parent : the phandle for the interrupt controller to which the
- device interrupts are connected.
- interrupts : specifies attributes for the out-of-band interrupt (host-wake).
When not specified the device will use in-band SDIO interrupts.
- interrupt-names : name of the out-of-band interrupt, which must be set
diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
index 59de8646862d..9bf9bbac16e2 100644
--- a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
+++ b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
@@ -29,7 +29,6 @@ Optional properties:
- marvell,wakeup-pin : a wakeup pin number of wifi chip which will be configured
to firmware. Firmware will wakeup the host using this pin
during suspend/resume.
- - interrupt-parent: phandle of the parent interrupt controller
- interrupts : interrupt pin number to the cpu. driver will request an irq based on
this interrupt number. during system suspend, the irq will be enabled
so that the wifi chip can wakeup host platform under certain condition.
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
index 189ae5cad8f7..bb2fcde6f7ff 100644
--- a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
@@ -8,8 +8,6 @@ Required properties:
- reg : Chip select address of device
- spi-max-frequency : Maximum SPI clocking speed of device in Hz
- interrupts : Should contain interrupt line
-- interrupt-parent : Should be the phandle for the interrupt controller
- that services interrupts for this device
- vio-supply : phandle to regulator providing VIO
- ti,power-gpio : GPIO connected to chip's PMEN pin
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt
index 8f9ced076fe1..cb5c9e1569ca 100644
--- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt
@@ -17,9 +17,7 @@ Required properties:
* "ti,wl1837"
- reg : Chip select address of device
- spi-max-frequency : Maximum SPI clocking speed of device in Hz
-- interrupt-parent, interrupts :
- Should contain parameters for 1 interrupt line.
- Interrupt parameters: parent, line number, type.
+- interrupts : Should contain parameters for 1 interrupt line.
- vwlan-supply : Point the node of the regulator that powers/enable the
wl12xx/wl18xx chip
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
index f42f6b0f1bc7..9306c4dadd46 100644
--- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
@@ -20,8 +20,6 @@ Required properties:
- interrupts : specifies attributes for the out-of-band interrupt.
Optional properties:
- - interrupt-parent : the phandle for the interrupt controller to which the
- device interrupts are connected.
- ref-clock-frequency : ref clock frequency in Hz
- tcxo-clock-frequency : tcxo clock frequency in Hz
diff --git a/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt b/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt
index 09cd3bc4d038..9514c327d31b 100644
--- a/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt
+++ b/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt
@@ -7,7 +7,6 @@ Required properties:
- reg-names: must include the following entries:
"csr": CSR registers
"vector_slave": vectors slave port region
-- interrupt-parent: interrupt source phandle.
- interrupts: specifies the interrupt source of the parent interrupt
controller. The format of the interrupt specifier depends on the
parent interrupt controller.
diff --git a/Documentation/devicetree/bindings/pci/altera-pcie.txt b/Documentation/devicetree/bindings/pci/altera-pcie.txt
index a1dc9366a8fc..6c396f17c91a 100644
--- a/Documentation/devicetree/bindings/pci/altera-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/altera-pcie.txt
@@ -6,7 +6,6 @@ Required properties:
- reg-names: must include the following entries:
"Txs": TX slave port region
"Cra": Control register access region
-- interrupt-parent: interrupt source phandle.
- interrupts: specifies the interrupt source of the parent interrupt
controller. The format of the interrupt specifier depends
on the parent interrupt controller.
diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
index b8e48b4762b2..df065aa53a83 100644
--- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
@@ -65,7 +65,6 @@ When the iProc event queue based MSI is used, one needs to define the
following properties in the MSI device node:
- compatible: Must be "brcm,iproc-msi"
- msi-controller: claims itself as an MSI controller
-- interrupt-parent: Link to its parent interrupt device
- interrupts: List of interrupt IDs from its parent interrupt device
Optional properties:
diff --git a/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt b/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt
index 89a84f8aa621..5f8cb4962f8d 100644
--- a/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt
+++ b/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt
@@ -41,7 +41,6 @@ Mandatory subnodes:
- For "faraday,ftpci100" a node representing the interrupt-controller inside the
host bridge is mandatory. It has the following mandatory properties:
- interrupt: see interrupt-controller/interrupts.txt
- - interrupt-parent: see interrupt-controller/interrupts.txt
- interrupt-controller: see interrupt-controller/interrupts.txt
- #address-cells: set to <0>
- #interrupt-cells: set to <1>
diff --git a/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
index 65038aa642e5..a618d4787dd7 100644
--- a/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
@@ -26,9 +26,6 @@ Required properties:
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: specifies the number of cells needed to encode an
interrupt source. The value must be 1.
-- interrupt-parent : phandle to the interrupt controller that
- it is attached to, it should be set to gic to point to
- ARM's Generic Interrupt Controller node in system DT.
- interrupts: The interrupt line of the PCIe controller
last cell of this field is set to 4 to
denote it as IRQ_TYPE_LEVEL_HIGH type interrupt.
diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt
index 3d4a209b0fd0..4dd17de549a7 100644
--- a/Documentation/devicetree/bindings/pci/pci-keystone.txt
+++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt
@@ -17,7 +17,6 @@ reg: index 1 is the base address and length of DW application registers.
pcie_msi_intc : Interrupt controller device node for MSI IRQ chip
interrupt-cells: should be set to 1
- interrupt-parent: Parent interrupt controller phandle
interrupts: GIC interrupt lines connected to PCI MSI interrupt lines
Example:
@@ -37,8 +36,6 @@ pcie_msi_intc : Interrupt controller device node for MSI IRQ chip
pcie_intc: Interrupt controller device node for Legacy IRQ chip
interrupt-cells: should be set to 1
- interrupt-parent: Parent interrupt controller phandle
- interrupts: GIC interrupt lines connected to PCI Legacy interrupt lines
Example:
pcie_intc: legacy-interrupt-controller {
diff --git a/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
index a04ab1b76211..ffba4f63d71f 100644
--- a/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
+++ b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
@@ -41,9 +41,6 @@
- #interrupt-cells: specifies the number of cells needed to encode an
interrupt source. The value must be 1.
- - interrupt-parent: the phandle for the interrupt controller that
- services interrupts for this device.
-
- interrupts: specifies the interrupt source of the parent interrupt
controller. The format of the interrupt specifier depends on the
parent interrupt controller.
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
index def8fcad8941..3b695131c51b 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
@@ -16,8 +16,6 @@ If the property interrupt-controller is defined, following property is required
- reg-names: A string describing the "reg" entries. Must contain "eint".
- interrupts : The interrupt output from the controller.
- #interrupt-cells: Should be two.
-- interrupt-parent: Phandle of the interrupt parent to which the external
- GPIO interrupts are forwarded to.
Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt
index bf76867168e9..4023bad2fe39 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt
@@ -25,8 +25,6 @@ Required properties:
- gpio-controller: Marks the device as a GPIO controller.
Optional properties :
-- interrupt-parent: phandle of the parent interrupt controller.
-
- interrupts: Interrupt specifier for the controllers interrupt.
- interrupt-controller: Marks the device as a interrupt controller.
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index 5e00a21de2bf..decc16abd379 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -124,8 +124,6 @@ used as system wakeup events.
A. External GPIO Interrupts: For supporting external gpio interrupts, the
following properties should be specified in the pin-controller device node.
- - interrupt-parent: phandle of the interrupt parent to which the external
- GPIO interrupts are forwarded to.
- interrupts: interrupt specifier for the controller. The format and value of
the interrupt specifier depends on the interrupt parent for the controller.
@@ -160,8 +158,6 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
found on Samsung Exynos4210 and S5PC110/S5PV210 SoCs.
- samsung,exynos7-wakeup-eint: represents wakeup interrupt controller
found on Samsung Exynos7 SoC.
- - interrupt-parent: phandle of the interrupt parent to which the external
- wakeup interrupts are forwarded to.
- interrupts: interrupt used by multiplexed wakeup interrupts.
In addition, following properties must be present in node of every bank
@@ -181,8 +177,6 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
Node of every bank of pins supporting direct wake-up interrupts (without
multiplexing) must contain following properties:
- - interrupt-parent: phandle of the interrupt parent to which the external
- wakeup interrupts are forwarded to.
- interrupts: interrupts of the interrupt parent which are used for external
wakeup interrupts from pins of the bank, must contain interrupts for all
pins of the bank.
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
index 9a06e1fdbc42..a8bb36b4f9fd 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
@@ -37,8 +37,6 @@ Required properties:
Optional properties:
- reset: : Reference to the reset controller
- - interrupt-parent: phandle of the interrupt parent to which the external
- GPIO interrupts are forwarded to.
- st,syscfg: Should be phandle/offset pair. The phandle to the syscon node
which includes IRQ mux selection register, and the offset of the IRQ mux
selection register.
diff --git a/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt b/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt
index b86ecada4f84..c7dfb7cecf40 100644
--- a/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt
+++ b/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt
@@ -9,8 +9,6 @@ Required properties:
- interrupts: <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and level
information for the interrupt.
- - interrupt-parent: the phandle for the interrupt controller that
- services interrupts for this device.
Optional properties:
- active-semi,input-voltage-threshold-microvolt: unit: mV;
diff --git a/Documentation/devicetree/bindings/power/supply/bq24257.txt b/Documentation/devicetree/bindings/power/supply/bq24257.txt
index d693702c9c1e..f8f5a1685bb9 100644
--- a/Documentation/devicetree/bindings/power/supply/bq24257.txt
+++ b/Documentation/devicetree/bindings/power/supply/bq24257.txt
@@ -6,8 +6,6 @@ Required properties:
* "ti,bq24251"
* "ti,bq24257"
- reg: integer, i2c address of the device.
-- interrupt-parent: Should be the phandle for the interrupt controller. Use in
- conjunction with "interrupts".
- interrupts: Interrupt mapping for GPIO IRQ (configure for both edges). Use in
conjunction with "interrupt-parent".
- ti,battery-regulation-voltage: integer, maximum charging voltage in uV.
diff --git a/Documentation/devicetree/bindings/power/supply/lp8727_charger.txt b/Documentation/devicetree/bindings/power/supply/lp8727_charger.txt
index 2246bc5c874b..0355a4b68f79 100644
--- a/Documentation/devicetree/bindings/power/supply/lp8727_charger.txt
+++ b/Documentation/devicetree/bindings/power/supply/lp8727_charger.txt
@@ -5,7 +5,6 @@ Required properties:
- reg: I2C slave address 27h
Optional properties:
-- interrupt-parent: interrupt controller node (see interrupt binding[0])
- interrupts: interrupt specifier (see interrupt binding[0])
- debounce-ms: interrupt debounce time. (u32)
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt b/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt
index d6e8dfd0a581..f956247d493e 100644
--- a/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt
@@ -3,7 +3,6 @@ Maxim MAX14656 / AL32 USB Charger Detector
Required properties :
- compatible : "maxim,max14656";
- reg: i2c slave address
-- interrupt-parent: the phandle for the interrupt controller
- interrupts: interrupt line
Example:
diff --git a/Documentation/devicetree/bindings/power/supply/rt9455_charger.txt b/Documentation/devicetree/bindings/power/supply/rt9455_charger.txt
index 5d9ad5cf2c5a..1e6107c7578e 100644
--- a/Documentation/devicetree/bindings/power/supply/rt9455_charger.txt
+++ b/Documentation/devicetree/bindings/power/supply/rt9455_charger.txt
@@ -4,8 +4,6 @@ Required properties:
- compatible: it should contain one of the following:
"richtek,rt9455".
- reg: integer, i2c address of the device.
-- interrupt-parent: the phandle for the interrupt controller that
- services interrupts for this device.
- interrupts: interrupt mapping for GPIO IRQ, it should be
configured with IRQ_TYPE_LEVEL_LOW flag.
- richtek,output-charge-current: integer, output current from the charger to the
diff --git a/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
index a3719623a94f..84e74151eef2 100644
--- a/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
+++ b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
@@ -7,8 +7,6 @@ Required properties:
specific registers.
Optional properties:
-- interrupt-parent: Should be the phandle for the interrupt controller. Use in
- conjunction with "interrupts".
- interrupts: Interrupt mapping for GPIO IRQ. Use in conjunction with
"interrupt-parent". If an interrupt is not provided the driver will switch
automatically to polling.
diff --git a/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt b/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt
index db939210e29d..940fd78e3363 100644
--- a/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt
+++ b/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt
@@ -19,7 +19,6 @@ The IBM Akebono board is a development board for the PPC476GTR SoC.
- compatible : should be "ibm,476gtr-sdhci","generic-sdhci".
- reg : should contain the SDHCI registers location and length.
- - interrupt-parent : a phandle for the interrupt controller.
- interrupts : should contain the SDHCI interrupt.
1.b) The Advanced Host Controller Interface (AHCI) SATA node
@@ -30,7 +29,6 @@ The IBM Akebono board is a development board for the PPC476GTR SoC.
- compatible : should be "ibm,476gtr-ahci".
- reg : should contain the AHCI registers location and length.
- - interrupt-parent : a phandle for the interrupt controller.
- interrupts : should contain the AHCI interrupt.
1.c) The FPGA node
diff --git a/Documentation/devicetree/bindings/powerpc/4xx/hsta.txt b/Documentation/devicetree/bindings/powerpc/4xx/hsta.txt
index c737c8338705..66dbd9ff56f7 100644
--- a/Documentation/devicetree/bindings/powerpc/4xx/hsta.txt
+++ b/Documentation/devicetree/bindings/powerpc/4xx/hsta.txt
@@ -13,7 +13,6 @@ device tree entries:
Require properties:
- compatible : "ibm,476gtr-hsta-msi", "ibm,hsta-msi"
- reg : register mapping for the HSTA MSI space
-- interrupt-parent : parent controller for mapping interrupts
- interrupts : ordered interrupt mapping for each MSI in the register
space. The first interrupt should be associated with a
register offset of 0x00, the second to 0x10, etc.
diff --git a/Documentation/devicetree/bindings/powerpc/4xx/ppc440spe-adma.txt b/Documentation/devicetree/bindings/powerpc/4xx/ppc440spe-adma.txt
index 515ebcf1b97d..de6a5f7d4aa4 100644
--- a/Documentation/devicetree/bindings/powerpc/4xx/ppc440spe-adma.txt
+++ b/Documentation/devicetree/bindings/powerpc/4xx/ppc440spe-adma.txt
@@ -38,7 +38,6 @@ DMA devices.
2 sources: DMAx CS FIFO Needs Service IRQ (on UIC0)
and DMA Error IRQ (on UIC1). The latter is common
for both DMA engines>.
- - interrupt-parent : needed for interrupt mapping
Example:
@@ -65,7 +64,6 @@ DMA devices.
- compatible : "amcc,xor-accelerator";
- reg : <registers mapping>
- interrupts : <interrupt mapping for XOR interrupt source>
- - interrupt-parent : for interrupt mapping
Example:
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt b/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt
index 18a88100af94..4b01e1afafda 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt
@@ -84,13 +84,6 @@ PROPERTIES
Interrupt numbers are listed in order (perfmon, event0, event1).
- - interrupt-parent
- Usage: required
- Value type: <phandle>
- Definition: A single <phandle> value that points
- to the interrupt parent to which the child domain
- is being mapped. Value must be "&mpic"
-
- reg
Usage: required
Value type: <prop-encoded-array>
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/diu.txt b/Documentation/devicetree/bindings/powerpc/fsl/diu.txt
index b66cb6d31d69..eb45db1ecee5 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/diu.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/diu.txt
@@ -8,8 +8,6 @@ Required properties:
- reg : should contain at least address and length of the DIU register
set.
- interrupts : one DIU interrupt should be described here.
-- interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
Optional properties:
- edid : verbatim EDID data block describing attached display.
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
index 7fc1b010fa75..c11ad5c6db21 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
@@ -13,7 +13,6 @@ Required properties:
DMA channels and the address space of the DMA controller
- cell-index : controller index. 0 for controller @ 0x8100
- interrupts : interrupt specifier for DMA IRQ
-- interrupt-parent : optional, if needed for interrupt mapping
- DMA channel nodes:
- compatible : must include "fsl,elo-dma-channel"
@@ -25,7 +24,6 @@ Optional properties:
- interrupts : interrupt specifier for DMA channel IRQ
(on 83xx this is expected to be identical to
the interrupts property of the parent node)
- - interrupt-parent : optional, if needed for interrupt mapping
Example:
dma@82a8 {
@@ -88,7 +86,6 @@ Required properties:
- cell-index : DMA channel index starts at 0.
- reg : DMA channel specific registers
- interrupts : interrupt specifier for DMA channel IRQ
- - interrupt-parent : optional, if needed for interrupt mapping
Example:
dma@21300 {
@@ -146,7 +143,6 @@ Required properties:
- compatible : must include "fsl,eloplus-dma-channel"
- reg : DMA channel specific registers
- interrupts : interrupt specifier for DMA channel IRQ
- - interrupt-parent : optional, if needed for interrupt mapping
Example:
dma@100300 {
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ecm.txt b/Documentation/devicetree/bindings/powerpc/fsl/ecm.txt
index f514f29c67d6..76dc547bc492 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/ecm.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/ecm.txt
@@ -57,8 +57,4 @@ PROPERTIES
Usage: required
Value type: <prop-encoded-array>
- - interrupt-parent
- Usage: required
- Value type: <phandle>
-
=====================================================================
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mcm.txt b/Documentation/devicetree/bindings/powerpc/fsl/mcm.txt
index 4ceda9b3b413..a5dae6b1f545 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/mcm.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mcm.txt
@@ -57,8 +57,4 @@ PROPERTIES
Usage: required
Value type: <prop-encoded-array>
- - interrupt-parent
- Usage: required
- Value type: <phandle>
-
=====================================================================
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt
index 647817527c88..5dfd68f1a423 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt
@@ -18,8 +18,6 @@ Required properties :
- interrupts : <a b> where a is the interrupt number of the
PSC FIFO Controller and b is a field that represents an
encoding of the sense and level information for the interrupt.
- - interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
Recommended properties :
- fsl,rx-fifo-size : the size of the RX fifo slice (a multiple of 4)
@@ -45,8 +43,6 @@ Required properties :
- interrupts : <a b> where a is the interrupt number of the
PSC FIFO Controller and b is a field that represents an
encoding of the sense and level information for the interrupt.
- - interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
Recommended properties :
- clocks : specifies the clock needed to operate the fifo controller
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
index 82dd5b65cf48..f8d2b7fe06d6 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
@@ -21,11 +21,6 @@ Required properties:
be set as edge sensitive. If msi-available-ranges is present, only
the interrupts that correspond to available ranges shall be present.
-- interrupt-parent: the phandle for the interrupt controller
- that services interrupts for this device. for 83xx cpu, the interrupts
- are routed to IPIC, and for 85xx/86xx cpu the interrupts are routed
- to MPIC.
-
Optional properties:
- msi-available-ranges: use <start count> style section to define which
msi interrupt can be used in the 256 msi interrupts. This property is
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt b/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt
index c2b2899885f2..b21ab85de6e7 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt
@@ -32,8 +32,6 @@ Optional properties:
A standard property. It represents the CCSR registers of
all child PAMUs combined. Include it to provide support
for legacy drivers.
-- interrupt-parent : <phandle>
- Phandle to interrupt controller
- fsl,portid-mapping : <u32>
The Coherency Subdomain ID Port Mapping Registers and
Snoop ID Port Mapping registers, which are part of the
diff --git a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt
index a3dc4b9fa11a..c4d78f28d23c 100644
--- a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt
+++ b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt
@@ -148,7 +148,6 @@ Nintendo Wii device tree
- reg : should contain the controller registers location and length
- interrupt-controller
- interrupts : should contain the cascade interrupt of the "flipper" pic
- - interrupt-parent: should contain the phandle of the "flipper" pic
1.l) The General Purpose I/O (GPIO) controller node
diff --git a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
index 5c186a7a77ba..6fe825b8ac1b 100644
--- a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
@@ -32,8 +32,6 @@ Required properties:
'max8997,pmic-buck[1/2/5]-dvs-voltage' should be specified.
Optional properties:
-- interrupt-parent: Specifies the phandle of the interrupt controller to which
- the interrupts from max8997 are delivered to.
- interrupts: Interrupt specifiers for two interrupt sources.
- First interrupt specifier is for 'irq1' interrupt.
- Second interrupt specifier is for 'alert' interrupt.
diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
index 99872819604f..84bc76a7c39e 100644
--- a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
+++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
@@ -18,7 +18,6 @@ Required properties:
ti,tps659038-pmic
and also the generic series names
ti,palmas-pmic
-- interrupt-parent : The parent interrupt controller which is palmas.
- interrupts : The interrupt number and the type which can be looked up here:
arch/arm/boot/dts/include/dt-bindings/interrupt-controller/irq.h
- interrupts-name: The names of the individual interrupts.
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt b/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt
index e44a97e21164..25f8658e216f 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt
+++ b/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt
@@ -45,12 +45,6 @@ The following are the mandatory properties:
per the bindings in
Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
-Optional properties:
---------------------
-- interrupt-parent: phandle to the interrupt controller node. This property
- is needed if the device node hierarchy doesn't have an
- interrupt controller.
-
Example:
--------
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt b/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt
index 1eb72874130b..461dc1d8d570 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt
+++ b/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt
@@ -51,12 +51,6 @@ The following are the mandatory properties:
Documentation/devicetree/bindings/reset/ti,sci-reset.txt
for 66AK2G SoCs
-- interrupt-parent: Should contain a phandle to the Keystone 2 IRQ controller
- IP node that is used by the ARM CorePac processor to
- receive interrupts from the DSP remote processors. See
- Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt
- for details.
-
- interrupts: Should contain an entry for each value in 'interrupt-names'.
Each entry should have the interrupt source number used by
the remote processor to the host processor. The values should
diff --git a/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt b/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt
index 1d990bcc0baf..d946f28502b3 100644
--- a/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt
+++ b/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt
@@ -7,8 +7,6 @@ Required properties:
- compatible : should contain "brcm,brcmstb-waketimer"
- reg : the register start and length for the WKTMR block
- interrupts : The TIMER interrupt
-- interrupt-parent: The phandle to the Always-On (AON) Power Management (PM) L2
- interrupt controller node
- clocks : The phandle to the UPG fixed clock (27Mhz domain)
Example:
diff --git a/Documentation/devicetree/bindings/rtc/isil,isl12057.txt b/Documentation/devicetree/bindings/rtc/isil,isl12057.txt
index fbbdd92e5af9..ff7c43555199 100644
--- a/Documentation/devicetree/bindings/rtc/isil,isl12057.txt
+++ b/Documentation/devicetree/bindings/rtc/isil,isl12057.txt
@@ -25,9 +25,6 @@ Optional properties:
- "wakeup-source": mark the chip as a wakeup source, independently of
the availability of an IRQ line connected to the SoC.
- - "interrupt-parent", "interrupts": for passing the interrupt line
- of the SoC connected to IRQ#2 of the RTC chip.
-
Example isl12057 node without IRQ#2 pin connected (no alarm support):
diff --git a/Documentation/devicetree/bindings/rtc/rtc-cmos.txt b/Documentation/devicetree/bindings/rtc/rtc-cmos.txt
index 7382989b3052..b94b35f3600b 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-cmos.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-cmos.txt
@@ -7,7 +7,6 @@ Required properties:
Optional properties:
- interrupts : should contain interrupt.
- - interrupt-parent : interrupt source phandle.
- ctrl-reg : Contains the initial value of the control register also
called "Register B".
- freq-reg : Contains the initial value of the frequency register also
diff --git a/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt
index d28d6e7f6ae8..226cc93df875 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt
@@ -21,7 +21,6 @@ Required properties:
- reg: I2C bus address of the device
Optional properties:
-- interrupt-parent: phandle for the interrupt controller.
- interrupts: rtc alarm interrupt.
- clock-output-names: From common clock binding to override the default output
clock name
diff --git a/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt b/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt
index 717d93860af1..c746cb221210 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt
@@ -16,7 +16,6 @@ Required properties:
- reg: I2C bus address of the device
Optional properties:
-- interrupt-parent: phandle for the interrupt controller.
- interrupts: rtc alarm interrupt.
- clock-output-names: From common clock binding to override the default output
clock name
diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
index bee41f97044e..062ebb14cecf 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-omap.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
@@ -11,7 +11,6 @@ Required properties:
- "ti,am4372-rtc" - for RTC IP used similar to that on AM437X SoC family.
- reg: Address range of rtc register set
- interrupts: rtc timer, alarm interrupts in order
-- interrupt-parent: phandle for the interrupt controller
Optional properties:
- system-power-controller: whether the rtc is controlling the system power
diff --git a/Documentation/devicetree/bindings/rtc/rtc-palmas.txt b/Documentation/devicetree/bindings/rtc/rtc-palmas.txt
index eb1c7fdeb413..c6cf37758a77 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-palmas.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-palmas.txt
@@ -3,7 +3,6 @@ Palmas RTC controller bindings
Required properties:
- compatible:
- "ti,palmas-rtc" for palma series of the RTC controller
-- interrupt-parent: Parent interrupt device, must be handle of palmas node.
- interrupts: Interrupt number of RTC submodule on device.
Optional properties:
diff --git a/Documentation/devicetree/bindings/rtc/spear-rtc.txt b/Documentation/devicetree/bindings/rtc/spear-rtc.txt
index ca67ac62108e..fecf8e4ad4b4 100644
--- a/Documentation/devicetree/bindings/rtc/spear-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/spear-rtc.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible : "st,spear600-rtc"
- reg : Address range of the rtc registers
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupt: Should contain the rtc interrupt number
Example:
diff --git a/Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt b/Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt
index 7c170da0d4b7..1f5754299d31 100644
--- a/Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt
@@ -3,7 +3,6 @@ Spreadtrum SC27xx Real Time Clock
Required properties:
- compatible: should be "sprd,sc2731-rtc".
- reg: address offset of rtc register.
-- interrupt-parent: phandle for the interrupt controller.
- interrupts: rtc alarm interrupt.
Example:
diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
index c920e2736991..130ca5b98253 100644
--- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
@@ -13,8 +13,6 @@ Required properties:
It is required on stm32(h7/mp1).
- clock-names: must be "rtc_ck" and "pclk".
It is required on stm32(h7/mp1).
-- interrupt-parent: phandle for the interrupt controller.
- It is required on stm32(f4/f7/h7).
- interrupts: rtc alarm interrupt. On stm32mp1, a second interrupt is required
for rtc alarm wakeup interrupt.
- st,syscfg: phandle/offset/mask triplet. The phandle to pwrcfg used to
diff --git a/Documentation/devicetree/bindings/rtc/stericsson,coh901331.txt b/Documentation/devicetree/bindings/rtc/stericsson,coh901331.txt
index 3ebeb311335f..e615a897b20e 100644
--- a/Documentation/devicetree/bindings/rtc/stericsson,coh901331.txt
+++ b/Documentation/devicetree/bindings/rtc/stericsson,coh901331.txt
@@ -3,7 +3,6 @@ ST-Ericsson COH 901 331 Real Time Clock
Required properties:
- compatible: must be "stericsson,coh901331"
- reg: address range of rtc register set.
-- interrupt-parent: phandle for the interrupt controller.
- interrupts: rtc alarm interrupt.
- clocks: phandle to the rtc clock source
diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt
index 6a4e0d30d8c4..0dc121b6eace 100644
--- a/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt
+++ b/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt
@@ -6,7 +6,6 @@ Required properties:
- reg: address on the bus
Optional ST33ZP24 Properties:
-- interrupt-parent: phandle for the interrupt gpio controller
- interrupts: GPIO interrupt to which the chip is connected
- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state.
If set, power must be present when the platform is going into sleep/hibernate mode.
diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt
index 604dce901b60..37198971f17b 100644
--- a/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt
+++ b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt
@@ -5,7 +5,6 @@ Required properties:
- spi-max-frequency: Maximum SPI frequency (<= 10000000).
Optional ST33ZP24 Properties:
-- interrupt-parent: phandle for the interrupt gpio controller
- interrupts: GPIO interrupt to which the chip is connected
- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state.
If set, power must be present when the platform is going into sleep/hibernate mode.
diff --git a/Documentation/devicetree/bindings/security/tpm/tpm_tis_mmio.txt b/Documentation/devicetree/bindings/security/tpm/tpm_tis_mmio.txt
index 41d740545189..7c6304426da1 100644
--- a/Documentation/devicetree/bindings/security/tpm/tpm_tis_mmio.txt
+++ b/Documentation/devicetree/bindings/security/tpm/tpm_tis_mmio.txt
@@ -13,7 +13,7 @@ Required properties:
"tcg,tpm-tis-mmio". Valid chip strings are:
* "atmel,at97sc3204"
- reg: The location of the MMIO registers, should be at least 0x5000 bytes
-- interrupt-parent/interrupts: An optional interrupt indicating command completion.
+- interrupts: An optional interrupt indicating command completion.
Example:
diff --git a/Documentation/devicetree/bindings/serial/maxim,max310x.txt b/Documentation/devicetree/bindings/serial/maxim,max310x.txt
index 823f77dd7978..79e10a05a96a 100644
--- a/Documentation/devicetree/bindings/serial/maxim,max310x.txt
+++ b/Documentation/devicetree/bindings/serial/maxim,max310x.txt
@@ -7,8 +7,6 @@ Required properties:
- "maxim,max3109" for Maxim MAX3109,
- "maxim,max14830" for Maxim MAX14830.
- reg: SPI chip select number.
-- interrupt-parent: The phandle for the interrupt controller that
- services interrupts for this IC.
- interrupts: Specifies the interrupt source of the parent interrupt
controller. The format of the interrupt specifier depends on the
parent interrupt controller.
diff --git a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
index fbfe53635a3a..e7921a8e276b 100644
--- a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
+++ b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
@@ -10,8 +10,6 @@ Required properties:
- "nxp,sc16is760" for NXP SC16IS760,
- "nxp,sc16is762" for NXP SC16IS762.
- reg: I2C address of the SC16IS7xx device.
-- interrupt-parent: The phandle for the interrupt controller that
- services interrupts for this IC.
- interrupts: Should contain the UART interrupt
- clocks: Reference to the IC source clock.
@@ -44,8 +42,6 @@ Required properties:
- "nxp,sc16is760" for NXP SC16IS760,
- "nxp,sc16is762" for NXP SC16IS762.
- reg: SPI chip select number.
-- interrupt-parent: The phandle for the interrupt controller that
- services interrupts for this IC.
- interrupts: Specifies the interrupt source of the parent interrupt
controller. The format of the interrupt specifier depends on the
parent interrupt controller.
diff --git a/Documentation/devicetree/bindings/serial/qca,ar9330-uart.txt b/Documentation/devicetree/bindings/serial/qca,ar9330-uart.txt
index c5e032c85bf9..7d65126bd1d7 100644
--- a/Documentation/devicetree/bindings/serial/qca,ar9330-uart.txt
+++ b/Documentation/devicetree/bindings/serial/qca,ar9330-uart.txt
@@ -7,9 +7,6 @@ Required properties:
- reg: Specifies the physical base address of the controller and
the length of the memory mapped region.
-- interrupt-parent: The phandle for the interrupt controller that
- services interrupts for this device.
-
- interrupts: Specifies the interrupt source of the parent interrupt
controller. The format of the interrupt specifier depends on the
parent interrupt controller.
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt
index 626e1afa64a6..cce3cd71e85a 100644
--- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt
@@ -21,7 +21,6 @@ Optional properties:
one as described by the fsl,cpm1-gpio-irq-mask property. There should be as
many interrupts as number of ones in the mask property. The first interrupt in
the list corresponds to the most significant bit of the mask.
-- interrupt-parent : Parent for the above interrupt property.
Example of four SOC GPIO banks defined as gpio-controller nodes:
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/ucc.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/ucc.txt
index e47734bee3f0..5efb7ac94c79 100644
--- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/ucc.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/ucc.txt
@@ -11,8 +11,6 @@ Required properties:
information for the interrupt. This should be encoded based on
the information in section 2) depending on the type of interrupt
controller you have.
-- interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
- pio-handle : The phandle for the Parallel I/O port configuration.
- port-number : for UART drivers, the port number to use, between 0 and 3.
This usually corresponds to the /dev/ttyQE device, e.g. <0> = /dev/ttyQE0.
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt
index 9ccd5f30405b..da13999337a4 100644
--- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt
@@ -6,7 +6,6 @@ Required properties:
length, the next two two cells should contain PRAM location and
length.
- interrupts : should contain USB interrupt.
-- interrupt-parent : interrupt source phandle.
- fsl,fullspeed-clock : specifies the full speed USB clock source:
"none": clock source is disabled
"brg1" through "brg16": clock source is BRG1-BRG16, respectively
diff --git a/Documentation/devicetree/bindings/sound/cs35l33.txt b/Documentation/devicetree/bindings/sound/cs35l33.txt
index acfb47525b49..dc5a355d1a19 100644
--- a/Documentation/devicetree/bindings/sound/cs35l33.txt
+++ b/Documentation/devicetree/bindings/sound/cs35l33.txt
@@ -14,8 +14,6 @@ Optional properties:
- reset-gpios : gpio used to reset the amplifier
- - interrupt-parent : Specifies the phandle of the interrupt controller to
- which the IRQs from CS35L33 are delivered to.
- interrupts : IRQ line info CS35L33.
(See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
for further information relating to interrupt properties)
diff --git a/Documentation/devicetree/bindings/sound/cs35l34.txt b/Documentation/devicetree/bindings/sound/cs35l34.txt
index b218ead2e68e..2f7606b7d542 100644
--- a/Documentation/devicetree/bindings/sound/cs35l34.txt
+++ b/Documentation/devicetree/bindings/sound/cs35l34.txt
@@ -21,8 +21,6 @@ Optional properties:
- reset-gpios: GPIO used to reset the amplifier.
- - interrupt-parent : Specifies the phandle of the interrupt controller to
- which the IRQs from CS35L34 are delivered to.
- interrupts : IRQ line info CS35L34.
(See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
for further information relating to interrupt properties)
diff --git a/Documentation/devicetree/bindings/sound/cs35l35.txt b/Documentation/devicetree/bindings/sound/cs35l35.txt
index 77ee75c39233..7915897f8a81 100644
--- a/Documentation/devicetree/bindings/sound/cs35l35.txt
+++ b/Documentation/devicetree/bindings/sound/cs35l35.txt
@@ -10,8 +10,6 @@ Required properties:
as covered in
Documentation/devicetree/bindings/regulator/regulator.txt.
- - interrupt-parent : Specifies the phandle of the interrupt controller to
- which the IRQs from CS35L35 are delivered to.
- interrupts : IRQ line info CS35L35.
(See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
for further information relating to interrupt properties)
diff --git a/Documentation/devicetree/bindings/sound/cs42l42.txt b/Documentation/devicetree/bindings/sound/cs42l42.txt
index 9a2c5e2423d5..7dfaa2ab906f 100644
--- a/Documentation/devicetree/bindings/sound/cs42l42.txt
+++ b/Documentation/devicetree/bindings/sound/cs42l42.txt
@@ -15,9 +15,6 @@ Optional properties:
- reset-gpios : a GPIO spec for the reset pin. If specified, it will be
deasserted before communication to the codec starts.
- - interrupt-parent : Specifies the phandle of the interrupt controller to
- which the IRQs from CS42L42 are delivered to.
-
- interrupts : IRQ line info CS42L42.
(See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
for further information relating to interrupt properties)
@@ -107,4 +104,4 @@ cs42l42: cs42l42@48 {
cirrus,btn-det-event-dbnce = <10>;
cirrus,bias-lvls = <0x0F 0x08 0x04 0x01>;
cirrus,hs-bias-ramp-rate = <0x02>;
-};
\ No newline at end of file
+};
diff --git a/Documentation/devicetree/bindings/sound/da7218.txt b/Documentation/devicetree/bindings/sound/da7218.txt
index 3ab9dfef38d1..2cf30899bd0d 100644
--- a/Documentation/devicetree/bindings/sound/da7218.txt
+++ b/Documentation/devicetree/bindings/sound/da7218.txt
@@ -15,8 +15,6 @@ Required properties:
information relating to regulators)
Optional properties:
-- interrupt-parent: Specifies the phandle of the interrupt controller to which
- the IRQs from DA7218 are delivered to.
- interrupts: IRQ line info for DA7218 chip.
(See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
further information relating to interrupt properties)
diff --git a/Documentation/devicetree/bindings/sound/da7219.txt b/Documentation/devicetree/bindings/sound/da7219.txt
index c3df92d31c4b..e9d0baeb94e2 100644
--- a/Documentation/devicetree/bindings/sound/da7219.txt
+++ b/Documentation/devicetree/bindings/sound/da7219.txt
@@ -8,8 +8,6 @@ Required properties:
- compatible : Should be "dlg,da7219"
- reg: Specifies the I2C slave address
-- interrupt-parent : Specifies the phandle of the interrupt controller to which
- the IRQs from DA7219 are delivered to.
- interrupts : IRQ line info for DA7219.
(See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
further information relating to interrupt properties)
diff --git a/Documentation/devicetree/bindings/sound/fsl,ssi.txt b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
index d415888e1316..7e15a85cecd2 100644
--- a/Documentation/devicetree/bindings/sound/fsl,ssi.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
@@ -18,8 +18,6 @@ Required properties:
encoded based on the information in section 2)
depending on the type of interrupt controller you
have.
-- interrupt-parent: The phandle for the interrupt controller that
- services interrupts for this device.
- fsl,fifo-depth: The number of elements in the transmit and receive FIFOs.
This number is the maximum allowed value for SFCSR[TFWM0].
- clocks: "ipg" - Required clock for the SSI unit
diff --git a/Documentation/devicetree/bindings/sound/omap-dmic.txt b/Documentation/devicetree/bindings/sound/omap-dmic.txt
index fd8105f18978..418e30e72e89 100644
--- a/Documentation/devicetree/bindings/sound/omap-dmic.txt
+++ b/Documentation/devicetree/bindings/sound/omap-dmic.txt
@@ -6,7 +6,6 @@ Required properties:
<MPU access base address, size>,
<L3 interconnect address, size>;
- interrupts: Interrupt number for DMIC
-- interrupt-parent: The parent interrupt controller
- ti,hwmods: Name of the hwmod associated with OMAP dmic IP
Example:
diff --git a/Documentation/devicetree/bindings/sound/omap-mcbsp.txt b/Documentation/devicetree/bindings/sound/omap-mcbsp.txt
index 17cce4490456..ae8bf703ce7a 100644
--- a/Documentation/devicetree/bindings/sound/omap-mcbsp.txt
+++ b/Documentation/devicetree/bindings/sound/omap-mcbsp.txt
@@ -15,7 +15,6 @@ Required properties:
<TX irq>,
<RX irq>;
- interrupt-names: Array of strings associated with the interrupt numbers
-- interrupt-parent: The parent interrupt controller
- ti,buffer-size: Size of the FIFO on the port (OMAP2430 and newer SoC)
- ti,hwmods: Name of the hwmod associated to the McBSP port
diff --git a/Documentation/devicetree/bindings/sound/omap-mcpdm.txt b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt
index 0741dff048dd..5f4e68ca228c 100644
--- a/Documentation/devicetree/bindings/sound/omap-mcpdm.txt
+++ b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt
@@ -6,7 +6,6 @@ Required properties:
<MPU access base address, size>,
<L3 interconnect address, size>;
- interrupts: Interrupt number for McPDM
-- interrupt-parent: The parent interrupt controller
- ti,hwmods: Name of the hwmod associated to the McPDM
Example:
diff --git a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt
index 551ecab67efe..fdcea3d12ee5 100644
--- a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt
@@ -7,7 +7,6 @@ Bindings for codec Analog IP which is integrated in pmic pm8916,
Required properties
- compatible = "qcom,pm8916-wcd-analog-codec";
- reg: represents the slave base address provided to the peripheral.
- - interrupt-parent : The parent interrupt controller.
- interrupts: List of interrupts in given SPMI peripheral.
- interrupt-names: Names specified to above list of interrupts in same
order. List of supported interrupt names are:
diff --git a/Documentation/devicetree/bindings/sound/rt5514.txt b/Documentation/devicetree/bindings/sound/rt5514.txt
index b25ed08c7a5a..d2cc171f22f2 100644
--- a/Documentation/devicetree/bindings/sound/rt5514.txt
+++ b/Documentation/devicetree/bindings/sound/rt5514.txt
@@ -14,7 +14,6 @@ Optional properties:
- clocks: The phandle of the master clock to the CODEC
- clock-names: Should be "mclk"
-- interrupt-parent: The phandle for the interrupt controller.
- interrupts: The interrupt number to the cpu. The interrupt specifier format
depends on the interrupt controller.
diff --git a/Documentation/devicetree/bindings/sound/ts3a227e.txt b/Documentation/devicetree/bindings/sound/ts3a227e.txt
index a836881d9608..3ed8359144d3 100644
--- a/Documentation/devicetree/bindings/sound/ts3a227e.txt
+++ b/Documentation/devicetree/bindings/sound/ts3a227e.txt
@@ -10,7 +10,6 @@ Required properties:
- compatible: Should contain "ti,ts3a227e".
- reg: The i2c address. Should contain <0x3b>.
- - interrupt-parent: The parent interrupt controller
- interrupts: Interrupt number for /INT pin from the 227e
Optional properies:
diff --git a/Documentation/devicetree/bindings/sound/ux500-msp.txt b/Documentation/devicetree/bindings/sound/ux500-msp.txt
index 99acd9c774e1..7dd1b96160f5 100644
--- a/Documentation/devicetree/bindings/sound/ux500-msp.txt
+++ b/Documentation/devicetree/bindings/sound/ux500-msp.txt
@@ -6,7 +6,6 @@ Required properties:
Optional properties:
- interrupts : The interrupt output from the device.
- - interrupt-parent : The parent interrupt controller.
- <name>-supply : Phandle to the regulator <name> supply
Example:
diff --git a/Documentation/devicetree/bindings/sound/wm8994.txt b/Documentation/devicetree/bindings/sound/wm8994.txt
index 0795931c38a2..68cccc4653ba 100644
--- a/Documentation/devicetree/bindings/sound/wm8994.txt
+++ b/Documentation/devicetree/bindings/sound/wm8994.txt
@@ -26,7 +26,6 @@ Optional properties:
- interrupt-controller : These devices contain interrupt controllers
and may provide interrupt services to other devices if they have an
interrupt line connected.
- - interrupt-parent : The parent interrupt controller.
- #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
The first cell is the IRQ number.
The second cell is the flags, encoded as the trigger masks from
diff --git a/Documentation/devicetree/bindings/spi/fsl-spi.txt b/Documentation/devicetree/bindings/spi/fsl-spi.txt
index a2331372068c..8854004a1d3a 100644
--- a/Documentation/devicetree/bindings/spi/fsl-spi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-spi.txt
@@ -12,8 +12,6 @@ Required properties:
information for the interrupt. This should be encoded based on
the information in section 2) depending on the type of interrupt
controller you have.
-- interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
- clock-frequency : input clock frequency to non FSL_SOC cores
Optional properties:
diff --git a/Documentation/devicetree/bindings/spi/sh-hspi.txt b/Documentation/devicetree/bindings/spi/sh-hspi.txt
index 585fed90376e..b9d1e4d11a77 100644
--- a/Documentation/devicetree/bindings/spi/sh-hspi.txt
+++ b/Documentation/devicetree/bindings/spi/sh-hspi.txt
@@ -6,8 +6,6 @@ Required properties:
- "renesas,hspi-r8a7778" (R-Car M1)
- "renesas,hspi-r8a7779" (R-Car H1)
- reg : Offset and length of the register set for the device
-- interrupt-parent : The phandle for the interrupt controller that
- services interrupts for this device
- interrupts : Interrupt specifier
- #address-cells : Must be <1>
- #size-cells : Must be <0>
diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt
index 39806329c193..bfbc2035fb6b 100644
--- a/Documentation/devicetree/bindings/spi/sh-msiof.txt
+++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt
@@ -29,8 +29,6 @@ Required properties:
If two register sets are present, the first is to be
used by the CPU, and the second is to be used by the
DMA engine.
-- interrupt-parent : The phandle for the interrupt controller that
- services interrupts for this device
- interrupts : Interrupt specifier
- #address-cells : Must be <1>
- #size-cells : Must be <0>
diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.txt b/Documentation/devicetree/bindings/spi/spi-cadence.txt
index 94f09141a4f0..05a2ef945664 100644
--- a/Documentation/devicetree/bindings/spi/spi-cadence.txt
+++ b/Documentation/devicetree/bindings/spi/spi-cadence.txt
@@ -6,7 +6,6 @@ Required properties:
- reg : Physical base address and size of SPI registers map.
- interrupts : Property with a value describing the interrupt
number.
-- interrupt-parent : Must be core interrupt controller
- clock-names : List of input clock names - "ref_clk", "pclk"
(See clock bindings for details).
- clocks : Clock phandles (see clock bindings for details).
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
index 225ace1d0c65..4af132606b37 100644
--- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
@@ -4,7 +4,6 @@ Required properties:
- compatible :
- "fsl,imx7ulp-spi" for LPSPI compatible with the one integrated on i.MX7ULP soc
- reg : address and length of the lpspi master registers
-- interrupt-parent : core interrupt controller
- interrupts : lpspi interrupt
- clocks : lpspi clock specifier
diff --git a/Documentation/devicetree/bindings/spi/spi-rspi.txt b/Documentation/devicetree/bindings/spi/spi-rspi.txt
index 3b02b3a7cfb2..96fd58548f69 100644
--- a/Documentation/devicetree/bindings/spi/spi-rspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-rspi.txt
@@ -28,8 +28,6 @@ Required properties:
- "rx" for SPRI,
- "tx" to SPTI,
- "mux" for a single muxed interrupt.
-- interrupt-parent : The phandle for the interrupt controller that
- services interrupts for this device.
- num-cs : Number of chip selects. Some RSPI cores have more than 1.
- #address-cells : Must be <1>
- #size-cells : Must be <0>
diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.txt b/Documentation/devicetree/bindings/spi/spi-xilinx.txt
index 7bf61efc66c8..dc924a5f71db 100644
--- a/Documentation/devicetree/bindings/spi/spi-xilinx.txt
+++ b/Documentation/devicetree/bindings/spi/spi-xilinx.txt
@@ -6,7 +6,6 @@ Required properties:
- reg : Physical base address and size of SPI registers map.
- interrupts : Property with a value describing the interrupt
number.
-- interrupt-parent : Must be core interrupt controller
Optional properties:
- xlnx,num-ss-bits : Number of chip selects used.
diff --git a/Documentation/devicetree/bindings/spi/spi-xlp.txt b/Documentation/devicetree/bindings/spi/spi-xlp.txt
index 40e82d51efec..f4925ec0ed33 100644
--- a/Documentation/devicetree/bindings/spi/spi-xlp.txt
+++ b/Documentation/devicetree/bindings/spi/spi-xlp.txt
@@ -13,7 +13,6 @@ Required properties:
- reg : Should contain register location and length.
- clocks : Phandle of the spi clock
- interrupts : Interrupt number used by this controller.
-- interrupt-parent : Phandle of the parent interrupt controller.
SPI slave nodes must be children of the SPI master node and can contain
properties described in Documentation/devicetree/bindings/spi/spi-bus.txt.
diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt
index c8f50e5cf70b..0f6d37ff541c 100644
--- a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt
@@ -6,7 +6,6 @@ Required properties:
- reg : Physical base address and size of GQSPI registers map.
- interrupts : Property with a value describing the interrupt
number.
-- interrupt-parent : Must be core interrupt controller.
- clock-names : List of input clock names - "ref_clk", "pclk"
(See clock bindings for details).
- clocks : Clock phandles (see clock bindings for details).
diff --git a/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt b/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt
index 02ea23a63f20..88bc94fe1f6d 100644
--- a/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt
+++ b/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible: Should be "st,spear600-adc"
- reg: Address and length of the register set for the device
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the ADC interrupt
- sampling-frequency: Default sampling frequency
diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
index 9d43553a8d39..43a9ed545944 100644
--- a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
+++ b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
@@ -7,7 +7,6 @@ Required properties:
- reg: address range for the AVS TMON registers
- interrupts: temperature monitor interrupt, for high/low threshold triggers
- interrupt-names: should be "tmon"
-- interrupt-parent: the parent interrupt controller
Example:
diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
index ad648d93d961..33004ce7e5df 100644
--- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
@@ -13,7 +13,6 @@
Exynos5420 (Must pass triminfo base and triminfo clock)
"samsung,exynos5433-tmu"
"samsung,exynos7-tmu"
-- interrupt-parent : The phandle for the interrupt controller
- reg : Address range of the thermal registers. For soc's which has multiple
instances of TMU and some registers are shared across all TMU's like
interrupt related then 2 set of register has to supplied. First set
diff --git a/Documentation/devicetree/bindings/timer/altr,timer-1.0.txt b/Documentation/devicetree/bindings/timer/altr,timer-1.0.txt
index 904a5846d7ac..e698e3488735 100644
--- a/Documentation/devicetree/bindings/timer/altr,timer-1.0.txt
+++ b/Documentation/devicetree/bindings/timer/altr,timer-1.0.txt
@@ -4,7 +4,6 @@ Required properties:
- compatible : should be "altr,timer-1.0"
- reg : Specifies base physical address and size of the registers.
-- interrupt-parent: phandle of the interrupt controller
- interrupts : Should contain the timer interrupt number
- clock-frequency : The frequency of the clock that drives the counter, in Hz.
diff --git a/Documentation/devicetree/bindings/timer/fsl,gtm.txt b/Documentation/devicetree/bindings/timer/fsl,gtm.txt
index 9a33efded4bc..fc1c571f7412 100644
--- a/Documentation/devicetree/bindings/timer/fsl,gtm.txt
+++ b/Documentation/devicetree/bindings/timer/fsl,gtm.txt
@@ -7,7 +7,6 @@ Required properties:
"fsl,<chip>-cpm2-gtm", "fsl,cpm2-gtm", "fsl,gtm" for CPM2 GTMs
- reg : should contain gtm registers location and length (0x40).
- interrupts : should contain four interrupts.
- - interrupt-parent : interrupt source phandle.
- clock-frequency : specifies the frequency driving the timer.
Example:
diff --git a/Documentation/devicetree/bindings/timer/marvell,orion-timer.txt b/Documentation/devicetree/bindings/timer/marvell,orion-timer.txt
index 62bb8260cf6a..cd1a0c256f94 100644
--- a/Documentation/devicetree/bindings/timer/marvell,orion-timer.txt
+++ b/Documentation/devicetree/bindings/timer/marvell,orion-timer.txt
@@ -3,7 +3,6 @@ Marvell Orion SoC timer
Required properties:
- compatible: shall be "marvell,orion-timer"
- reg: base address of the timer register starting with TIMERS CONTROL register
-- interrupt-parent: phandle of the bridge interrupt controller
- interrupts: should contain the interrupts for Timer0 and Timer1
- clocks: phandle of timer reference clock (tclk)
diff --git a/Documentation/devicetree/bindings/timer/snps,arc-timer.txt b/Documentation/devicetree/bindings/timer/snps,arc-timer.txt
index 4ef024630d61..147ef3e74452 100644
--- a/Documentation/devicetree/bindings/timer/snps,arc-timer.txt
+++ b/Documentation/devicetree/bindings/timer/snps,arc-timer.txt
@@ -12,10 +12,6 @@ Required properties:
(16 for ARCHS cores, 3 for ARC700 cores)
- clocks : phandle to the source clock
-Optional properties:
-
-- interrupt-parent : phandle to parent intc
-
Example:
timer0 {
diff --git a/Documentation/devicetree/bindings/timer/st,spear-timer.txt b/Documentation/devicetree/bindings/timer/st,spear-timer.txt
index c0017221cf55..b5238a07da17 100644
--- a/Documentation/devicetree/bindings/timer/st,spear-timer.txt
+++ b/Documentation/devicetree/bindings/timer/st,spear-timer.txt
@@ -5,8 +5,6 @@
- compatible : Should be:
"st,spear-timer"
- reg: Address range of the timer registers
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupt: Should contain the timer interrupt number
Example:
diff --git a/Documentation/devicetree/bindings/timer/ti,c64x+timer64.txt b/Documentation/devicetree/bindings/timer/ti,c64x+timer64.txt
index 95911fe70224..d96c1e283e73 100644
--- a/Documentation/devicetree/bindings/timer/ti,c64x+timer64.txt
+++ b/Documentation/devicetree/bindings/timer/ti,c64x+timer64.txt
@@ -7,7 +7,6 @@ Required properties:
- compatible: must be "ti,c64x+timer64"
- reg: base address and size of register region
-- interrupt-parent: interrupt controller
- interrupts: interrupt id
Optional properties:
diff --git a/Documentation/devicetree/bindings/usb/fsl-usb.txt b/Documentation/devicetree/bindings/usb/fsl-usb.txt
index 4779c029b675..0b08b006c5ea 100644
--- a/Documentation/devicetree/bindings/usb/fsl-usb.txt
+++ b/Documentation/devicetree/bindings/usb/fsl-usb.txt
@@ -33,8 +33,6 @@ Recommended properties :
information for the interrupt. This should be encoded based on
the information in section 2) depending on the type of interrupt
controller you have.
- - interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
Optional properties :
- fsl,invert-drvvbus : boolean; for MPC5121 USB0 only. Indicates the
diff --git a/Documentation/devicetree/bindings/usb/maxim,max3421.txt b/Documentation/devicetree/bindings/usb/maxim,max3421.txt
index 8cdbe0c85188..90495b1aeec2 100644
--- a/Documentation/devicetree/bindings/usb/maxim,max3421.txt
+++ b/Documentation/devicetree/bindings/usb/maxim,max3421.txt
@@ -11,9 +11,6 @@ Required properties:
The driver configures MAX3421E for active low level triggered interrupts,
configure your interrupt line accordingly.
-Optional property:
- - interrupt-parent: the phandle to the associated interrupt controller.
-
Example:
usb@0 {
diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
index 09e847e92e5e..d4cf53c071d9 100644
--- a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
+++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
@@ -3,8 +3,6 @@ Richtek RT1711H TypeC PD Controller.
Required properties:
- compatible : Must be "richtek,rt1711h".
- reg : Must be 0x4e, it's slave address of RT1711H.
- - interrupt-parent : the phandle for the interrupt controller that
- provides interrupts for this device.
- interrupts : <a b> where a is the interrupt number and b represents an
encoding of the sense and level information for the interrupt.
diff --git a/Documentation/devicetree/bindings/usb/samsung-hsotg.txt b/Documentation/devicetree/bindings/usb/samsung-hsotg.txt
index b83d428a265e..0388634598ce 100644
--- a/Documentation/devicetree/bindings/usb/samsung-hsotg.txt
+++ b/Documentation/devicetree/bindings/usb/samsung-hsotg.txt
@@ -14,8 +14,6 @@ Binding details
Required properties:
- compatible: "samsung,s3c6400-hsotg" should be used for all currently
supported SoC,
-- interrupt-parent: phandle for the interrupt controller to which the
- interrupt signal of the HSOTG block is routed,
- interrupts: specifier of interrupt signal of interrupt controller,
according to bindings of interrupt controller,
- clocks: contains an array of clock specifiers:
diff --git a/Documentation/devicetree/bindings/usb/spear-usb.txt b/Documentation/devicetree/bindings/usb/spear-usb.txt
index f8a464a25653..1dc91cc459c0 100644
--- a/Documentation/devicetree/bindings/usb/spear-usb.txt
+++ b/Documentation/devicetree/bindings/usb/spear-usb.txt
@@ -6,8 +6,6 @@ EHCI:
Required properties:
- compatible: "st,spear600-ehci"
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the EHCI interrupt
Example:
@@ -25,8 +23,6 @@ OHCI:
Required properties:
- compatible: "st,spear600-ohci"
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the OHCI interrupt
Example:
diff --git a/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt b/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt
index c3a36ee45552..750a87657448 100644
--- a/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt
@@ -5,7 +5,6 @@ Required properties:
- compatible : Should be "cdns,wdt-r1p2".
- clocks : This is pclk (APB clock).
- interrupts : This is wd_irq - watchdog timeout interrupt.
-- interrupt-parent : Must be core interrupt controller.
Optional properties
- reset-on-timeout : If this property exists, then a reset is done
diff --git a/Documentation/devicetree/bindings/watchdog/rt2880-wdt.txt b/Documentation/devicetree/bindings/watchdog/rt2880-wdt.txt
index d7bab3db9d1f..05b95bfa2a89 100644
--- a/Documentation/devicetree/bindings/watchdog/rt2880-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/rt2880-wdt.txt
@@ -5,7 +5,6 @@ Required properties:
- reg: physical base address of the controller and length of the register range
Optional properties:
-- interrupt-parent: phandle to the INTC device node
- interrupts: Specify the INTC interrupt number
Example:
diff --git a/Documentation/devicetree/bindings/xilinx.txt b/Documentation/devicetree/bindings/xilinx.txt
index 1d11b9002ef8..d058ace29345 100644
--- a/Documentation/devicetree/bindings/xilinx.txt
+++ b/Documentation/devicetree/bindings/xilinx.txt
@@ -49,7 +49,7 @@
followed by an older IP core version which implements the same
interface or any other device with the same interface.
- 'reg', 'interrupt-parent' and 'interrupts' are all optional properties.
+ 'reg' and 'interrupts' are all optional properties.
For example, the following block from system.mhs:
diff --git a/Documentation/devicetree/bindings/xillybus/xillybus.txt b/Documentation/devicetree/bindings/xillybus/xillybus.txt
index 9e316dc2e40f..e65d1f94b49c 100644
--- a/Documentation/devicetree/bindings/xillybus/xillybus.txt
+++ b/Documentation/devicetree/bindings/xillybus/xillybus.txt
@@ -4,8 +4,6 @@ Required properties:
- compatible: Should be "xillybus,xillybus-1.00.a"
- reg: Address and length of the register set for the device
- interrupts: Contains one interrupt node, typically consisting of three cells.
-- interrupt-parent: the phandle for the interrupt controller that
- services interrupts for this device.
Optional properties:
- dma-coherent: Present if DMA operations are coherent
--
2.17.1
^ permalink raw reply related
* ✓ Fi.CI.BAT: success for series starting with [1/2] drm/dp: add extended receiver capability field present bit
From: Patchwork @ 2018-07-23 22:12 UTC (permalink / raw)
To: matthew.s.atwood; +Cc: intel-gfx
In-Reply-To: <20180723212735.23893-1-matthew.s.atwood@intel.com>
== Series Details ==
Series: series starting with [1/2] drm/dp: add extended receiver capability field present bit
URL : https://patchwork.freedesktop.org/series/47087/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4530 -> Patchwork_9753 =
== Summary - SUCCESS ==
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/47087/revisions/1/mbox/
== Known issues ==
Here are the changes found in Patchwork_9753 that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@drv_module_reload@basic-reload-inject:
fi-glk-j4005: PASS -> DMESG-WARN (fdo#106248, fdo#106725)
igt@kms_flip@basic-flip-vs-modeset:
fi-glk-j4005: PASS -> DMESG-WARN (fdo#106000)
==== Possible fixes ====
igt@debugfs_test@read_all_entries:
fi-snb-2520m: INCOMPLETE (fdo#103713) -> PASS
igt@drv_selftest@live_workarounds:
fi-skl-6700hq: DMESG-FAIL (fdo#107292) -> PASS
igt@gem_exec_suspend@basic-s3:
fi-glk-j4005: DMESG-WARN (fdo#106097) -> PASS
igt@kms_chamelium@dp-edid-read:
fi-kbl-7500u: FAIL (fdo#103841) -> PASS
igt@kms_flip@basic-flip-vs-wf_vblank:
fi-glk-dsi: FAIL (fdo#100368) -> PASS
fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fdo#103841 https://bugs.freedesktop.org/show_bug.cgi?id=103841
fdo#106000 https://bugs.freedesktop.org/show_bug.cgi?id=106000
fdo#106097 https://bugs.freedesktop.org/show_bug.cgi?id=106097
fdo#106248 https://bugs.freedesktop.org/show_bug.cgi?id=106248
fdo#106725 https://bugs.freedesktop.org/show_bug.cgi?id=106725
fdo#107292 https://bugs.freedesktop.org/show_bug.cgi?id=107292
== Participating hosts (50 -> 43) ==
Missing (7): fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-skl-caroline fi-byt-clapper
== Build changes ==
* Linux: CI_DRM_4530 -> Patchwork_9753
CI_DRM_4530: d27cc4a37a5cc1ef14a3aafdcb6682e5f6a85d09 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4571: 65fccc149b85968cdce4737266b056059c1510f3 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_9753: 23a1b794202633961ad336e9f57c1ba6cb184d93 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
23a1b7942026 drm/i915: implement EXTENDED_RECEIVER_CAPABILITY_FIELD_PRESENT
6492b69821b5 drm/dp: add extended receiver capability field present bit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_9753/issues.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply
* Re: [Qemu-devel] [PATCH for-3.0?] target/arm: Add sve-max-vq cpu property to -cpu max
From: Peter Maydell @ 2018-07-23 22:11 UTC (permalink / raw)
To: Richard Henderson
Cc: QEMU Developers, Markus Armbruster, Alex Bennée,
Michael Roth
In-Reply-To: <20180723220047.31594-1-richard.henderson@linaro.org>
On 23 July 2018 at 23:00, Richard Henderson
<richard.henderson@linaro.org> wrote:
> This allows the default (and maximum) vector length to be set
> from the command-line. Which is extraordinarily helpful in
> debuging problems depending on vector length without having to
> bake knowledge of PR_SET_SVE_VL into every guest binary.
>
> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
> ---
>
> The argument for inclding this in 3.0 is that there appear to be
> several groups experimenting with SVE and using fixed vector lengths.
> While this is oddly against the design of SVE, it's probably going
> to keep happening. Plus, the wildly useful debugging aspect.
...on the other hand, it's a new feature and we're about to
cut rc2 tomorrow. I'd prefer to leave this til after 3.0 releases.
thanks
-- PMM
^ permalink raw reply
* Re: [Fuego] Problem of cant find “useradd” in Functional.glibc
From: Tim.Bird @ 2018-07-23 22:12 UTC (permalink / raw)
To: lixm.fnst, fuego
In-Reply-To: <62079D2F712F7747B0BDCC6821B8DF0D013D2794@G08CNEXMBPEKD02.g08.fujitsu.local>
> -----Original Message-----
> From: Behalf Of Li, Xiaoming
> Hi all:
>
> I have a question of cant find command “useradd” when working on
> /engine/tests/Functional.glibc/fuego_test.sh.
>
> Over a preliminary investigation, I found that the default path（or maybe bin
> path）loaded by“ssh non-interactive non-login” does not include “useradd”.
Are you saying that this line is failing:
is_on_target_path useradd PROGRAM_USERADD
?
>
> Methods below could solve this problem, anyone knows a better one ?
>
> 1）source /etc/profile;
>
> 2) use “useradd” with absolute path, like user/sbin/useradd, without
> checked by is_on_target_path;
According to the Linux File System Hierarchy Standard, useradd is supposed
to be located in /usr/sbin. See https://refspecs.linuxfoundation.org/FHS_3.0/fhs-3.0.pdf
So I think it would be acceptable to specify the full path: /usr/sbin/useradd.
A bit more robust is to use the value obtained from is_on_target (or is_on_target_path).
If /usr/sbin is not in the ssh interactive login PATH, then try this:
is_on_target useradd PROGRAM_USERADD /bin:/sbin:/usr/bin:/usr/sbin
In the echo statement that creates run-test.sh, you should be able to
use
$PROGRAM_USERADD fuego_test_special;
instead of
useradd fuego_test_special
As an aside, do we want the $(realpath /lib/libBrlkenLocale.so.1)
variable substitution to happen on the host at run-test.sh creation
time, or on the target at run-test.sh execution time. It looks to me
like it's getting substituted on host, but should rather be substituted
on target. To do this, I think the $ would need to be escaped in this
set of echo lines.
I hope this is useful.
-- Tim
^ permalink raw reply
* [PATCH] tpm: add support for partial reads
From: Jason Gunthorpe @ 2018-07-23 22:08 UTC (permalink / raw)
To: linux-security-module
In-Reply-To: <dabf6cf5-e62c-721f-9f19-18da34d52ec1@intel.com>
On Mon, Jul 23, 2018 at 03:00:20PM -0700, Tadeusz Struk wrote:
> On 07/23/2018 02:56 PM, Jason Gunthorpe wrote:
> > The proposed patch doesn't clear the data_pending if the entire buffer
> > is not consumed, so of course it is ABI breaking, that really isn't OK.
>
> The data_pending will be cleared by the timeout handler if the user doesn't
> read the response fully before the timeout expires. The is the same situation
> if the user would not read the response at all.
That causes write() to fail with EBUSY
NAK from me on breaking the ABI like this
Jason
--
To unsubscribe from this list: send the line "unsubscribe linux-security-module" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH 0/3] PTI for x86-32 Fixes and Updates
From: Dave Hansen @ 2018-07-23 22:07 UTC (permalink / raw)
To: Josh Poimboeuf, Pavel Machek
Cc: Linus Torvalds, Joerg Roedel, Thomas Gleixner, Ingo Molnar,
Peter Anvin, the arch/x86 maintainers, Linux Kernel Mailing List,
linux-mm, Andrew Lutomirski, Jürgen Groß,
Peter Zijlstra, Borislav Petkov, Jiri Kosina, Boris Ostrovsky,
Brian Gerst, David Laight, Denys Vlasenko, Eduardo Valentin,
Greg Kroah-Hartman, Will Deacon, Liguori, Anthony, Daniel Gruss,
Hugh Dickins, Kees Cook, Andrea Arcangeli, Waiman Long,
David H . Gutteridge, Joerg Roedel, Arnaldo Carvalho de Melo,
Alexander Shishkin, Jiri Olsa, Namhyung Kim
In-Reply-To: <20180723215958.jozblzq4sv7gp7uj@treble>
On 07/23/2018 02:59 PM, Josh Poimboeuf wrote:
> On Mon, Jul 23, 2018 at 11:38:30PM +0200, Pavel Machek wrote:
>> But for now I'd like at least "global" option of turning pti on/off
>> during runtime for benchmarking. Let me see...
>>
>> Something like this, or is it going to be way more complex? Does
>> anyone have patch by chance?
> RHEL/CentOS has a global PTI enable/disable, which uses stop_machine().
Let's not forget PTI's NX-for-userspace in the kernel page tables. That
provides Spectre V2 mitigation as well as Meltdown.
^ permalink raw reply
* Re: [PATCH nf] netfilter: nf_tables: move dumper state alloation into ->start
From: Pablo Neira Ayuso @ 2018-07-23 22:07 UTC (permalink / raw)
To: Florian Westphal; +Cc: netfilter-devel, netdev, cscnull
In-Reply-To: <20180723104714.24008-1-fw@strlen.de>
On Mon, Jul 23, 2018 at 12:47:14PM +0200, Florian Westphal wrote:
> Shaochun Chen points out we leak dumper filter state allocations
> stored in dump_control->data in case there is an error before netlink sets
> cb_running (after which ->done will be called at some point).
>
> In order to fix this, add .start functions and do the allocations
> there.
>
> ->done is going to clean up, and in case error occurs before
> ->start invocation no cleanups need to be done anymore.
Applied, thanks Florian.
^ permalink raw reply
* Re: [PATCHv3 2/2] mtd: m25p80: restore the status of SPI flash when exiting
From: Brian Norris @ 2018-07-23 22:06 UTC (permalink / raw)
To: Boris Brezillon
Cc: Zhiqiang Hou, linux-mtd, Linux Kernel, David Woodhouse,
Boris BREZILLON, Marek Vasut, Richard Weinberger, Cyrille Pitchen
In-Reply-To: <20180723221002.736e0830@bbrezillon>
Hi Boris,
On Mon, Jul 23, 2018 at 1:10 PM, Boris Brezillon
<boris.brezillon@bootlin.com> wrote:
> On Mon, 23 Jul 2018 11:13:50 -0700
> Brian Norris <computersforpeace@gmail.com> wrote:
>> I noticed this got merged, but I wanted to put my 2 cents in here:
>
> I wish you had replied to this thread when it was posted (more than
> 6 months ago). Reverting the patch now implies making some people
> unhappy because they'll have to resort to their old out-of-tree
> hacks :-(.
I'd say I'm sorry for not following things closely these days, but I'm
not really that sorry. There are plenty of other capable hands. And if
y'all shoot yourselves in the foot, so be it. This patch isn't going
to blow things up, but now that I did finally notice it (because it
happened to show up in a list of backports I was looking at), I
thought better late than never to remind you.
For way of notification: Marek already noticed that we've started down
a slippery slope months ago:
https://lkml.org/lkml/2018/4/8/141
Re: [PATCH] mtd: spi-nor: clear Extended Address Reg on switch to
3-byte addressing.
I'm not quite sure why that wasn't taken to its logical conclusion --
that the hack should be reverted.
This problem has been noted many times already, and we've always
stayed on the side of *avoiding* this hack. A few references from a
search of my email:
http://lists.infradead.org/pipermail/linux-mtd/2013-March/046343.html
[PATCH 1/3] mtd: m25p80: utilize dedicated 4-byte addressing commands
http://lists.infradead.org/pipermail/barebox/2014-September/020682.html
[RFC] MTD m25p80 3-byte addressing and boot problem
http://lists.infradead.org/pipermail/linux-mtd/2015-February/057683.html
[PATCH 2/2] m25p80: if supported put chip to deep power down if not used
>> On Wed, Dec 06, 2017 at 10:53:42AM +0800, Zhiqiang Hou wrote:
>> > From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
>> >
>> > Restore the status to be compatible with legacy devices.
>> > Take Freescale eSPI boot for example, it copies (in 3 Byte
>> > addressing mode) the RCW and bootloader images from SPI flash
>> > without firing a reset signal previously, so the reboot command
>> > will fail without reseting the addressing mode of SPI flash.
>> > This patch implement .shutdown function to restore the status
>> > in reboot process, and add the same operation to the .remove
>> > function.
>>
>> We have previously rejected this patch multiple times, because the above
>> comment demonstrates a broken product.
>
> If we were to only support working HW parts, I fear Linux would not
> support a lot of HW (that's even more true when it comes to flashes :P).
You stopped allowing UBI to attach to MLC NAND recently, no? That
sounds like almost the same boat -- you've probably killed quite a few
shitty products, if they were to use mainline directly.
Anyway, that's derailing the issue. Supporting broken hardware isn't
something you try to do by applying the same hack to all systems. You
normally try to apply your hack as narrowly as possible. You seem to
imply that below. So maybe that's a solution to move forward with. But
I'd personally be just as happy to see the patch reverted.
>> You cannot guarantee that all
>> reboots will invoke the .shutdown() method -- what about crashes? What
>> about watchdog resets? IIUC, those will hit the same broken behavior,
>> and have unexepcted behavior in your bootloader.
>
> Yes, there are corner cases that are not addressed with this approach,
Is a system crash really a corner case? :D
> but it still seems to improve things. Of course, that means the
> user should try to re-route all HW reset sources to SW ones (RESET input
> pin muxed to the GPIO controller, watchdog generating an interrupt
> instead of directly asserting the RESET output pin), which is not always
> possible, but even when it's not, isn't it better to have a setup that
> works fine 99% of the time instead of 50% of the time?
Perhaps, but not at the expense of future development. And
realistically, no one is doing that if they have this hack. Most
people won't even know that this hack is protecting them at all (so
again, they won't try to mitigate the problem any further).
>> I suppose one could argue for doing this in remove(), but AIUI you're
>> just papering over system bugs by introducing the shutdown() function
>> here. Thus, I'd prefer we drop the shutdown() method to avoid misleading
>> other users of this driver.
>
> I understand your point. But if the problem is about making sure people
> designing new boards get that right, why not complaining at probe time
> when things are wrong?
>
> I mean, spi_nor_restore() seems to only do something on very specific
> NORs (those on which a SW RESET does not resets the addressing
> mode).
The point isn't that SW RESET doesn't reset the addressing mode -- it
does on any flash I've seen. The point is that most systems are built
around a stateless assumption in these flash. IIRC, there wasn't even
a SW RESET command at all until these "huge" flash came around and
stateful addressing modes came about. So boot ROMs and bootloaders
would have to be updated to start figuring out when/how to do this SW
RESET. And once two vendors start doing it differently (I'm not sure:
have they done this already? I think so) it's no longer something a
boot ROM will get right.
The only way to get this stuff right is to have a hardware reset, or
else to avoid all of the stateful modes in software.
> So, how about adding a flag that says "my board has the NOR HW
> RESET pin wired" (there would be a DT props to set that flag). Then you
> add a WARN_ON() when this flag is not set and a NOR chip impacted by
> this bug is detected.
I'd kinda prefer the reverse. There really isn't a need to document
anything for a working system (software usually can't control this
RESET pin). The burden should be on the b0rked system to document
where it needs unsound hacks to survive.
> This way you make sure people are informed that
> they're doing something wrong, and for those who can't change their HW
> (because it's already widely deployed), you have a fix that improve
> things.
Or even better: put this hack behind a DT flag, so that one has to
admit that their board design is broken before it will even do
anything. Proposal: "linux,badly-designed-flash-reset".
But, I'd prefer just (partially?) reverting this, and let the authors
submit something that works. We're not obligated to keep bad hacks in
the kernel.
Brian
^ permalink raw reply
* Re: [RESEND] Spectre-v2 (IBPB/IBRS) and SSBD fixes for 4.4.y
From: Jiri Kosina @ 2018-07-23 22:06 UTC (permalink / raw)
To: Srivatsa S. Bhat
Cc: Dave Hansen, Wanpeng Li, Andi Kleen, linux-tip-commits, Piotr Luc,
Mel Gorman, arjan.van.de.ven, xen-devel, Alexander Sergeyev,
Brian Gerst, Andy Lutomirski, MickaëlSalaün,
Thomas Gleixner, Joe Konno, Laura Abbott, Will Drewry, gregkh,
linux-kernel, Jia Zhang, Andrew Morton, Linus Torvalds,
David Woodhouse, KarimAllah Ahmed, Dave Hansen
In-Reply-To: <153156030832.10043.13438231886571087086.stgit@srivatsa-ubuntu>
On Sat, 14 Jul 2018, Srivatsa S. Bhat wrote:
> This patch series is a backport of the Spectre-v2 fixes (IBPB/IBRS)
> and patches for the Speculative Store Bypass vulnerability to 4.4.y
> (they apply cleanly on top of 4.4.140).
FWIW -- not sure how much inspiration you took from our SLE 4.4-based
tree, but most of the stuff is already there for quite some time
(including the non-upstream IBRS on kernel boundary on SKL+, trampoline
stack for PTI (which the original port didn't have), etc).
The IBRS SKL+ stuff has not been picked up by Greg, as it's non-upstream,
and the trampoline stack I believe was pointed out to stable@, but noone
really sat down and did the port (our codebase is different than 4.4.x
stable base), but it definitely should be done if someone has to put 100%
trust into the PTI port (either that, or at least zeroing out the kernel
thread thread stack ... we used to have temporarily that before we
switched over to proper entry trampoline in this version as well).
Thanks,
--
Jiri Kosina
SUSE Labs
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply
* Re: [NOT YET PULL] Trial of labeling lines in code snippets
From: Paul E. McKenney @ 2018-07-23 21:03 UTC (permalink / raw)
To: Akira Yokosawa; +Cc: perfbook
In-Reply-To: <3a77a91b-6747-0d23-df5e-382c073f48aa@gmail.com>
On Tue, Jul 24, 2018 at 12:12:17AM +0900, Akira Yokosawa wrote:
> On 2018/07/24 00:09:37 +0900, Akira Yokosawa wrote:
> > On 2018/07/22 15:49:06 -0700, Paul E. McKenney wrote:
> >> On Mon, Jul 23, 2018 at 12:43:05AM +0900, Akira Yokosawa wrote:
> >>> On 2018/07/21 09:51:03 -0700, Paul E. McKenney wrote:
> >>>> On Sat, Jul 21, 2018 at 09:19:53AM +0900, Akira Yokosawa wrote:
> >>>>> Hi Paul,
> >>>>>
> >>>>> So, an experimental branch to label particular lines in code
> >>>>> snippets is ready for review.
> >>>>> The branch is based on current master of yours.
> >>>>>
> >>>>> I've converted 4 code snippets in Section 4.2. and updated
> >>>>> corresponding code samples (sans forkjoin.c because it is
> >>>>> quite simplified in Listing 4.1).
> >>>>>
> >>>>> Does this approach look reasonable to you?
> >>>>
> >>>> This does look promising, thank you! Please give me some time to think
> >>>> this over a bit. My normal approach would end up with very long labels
> >>>> in the code, which might be OK. The argument against is that tying the
> >>>> listing caption to the actual code might not be a great thing.
> >>>
> >>> One idea is to embed meta labels in code samples.
> >>> When converting them to a proper Verbatim sources, short labels such
> >>> as " //\lnlbl{foo}" can be converted to long ones such as
> >>> "%lnlbl[ln:<chapter>:<basename of snippet file>:foo]" in the script
> >>> to remove " //".
> >>>
> >>> To do this, we need to embed extra meta data as comments in sample
> >>> code.
> >>>
> >>> For example, the source of waitall() function (in api-pthread.h) can be
> >>> written as the following (in the form of \lnlbl{}):
> >>>
> >>> ----
> >>> /*
> >>> * Wait on all child processes.
> >>> */
> >>> static __inline__ void waitall(void)
> >>> {
> >>> // \begin{snippet}[chapter=toolsoftrade,name=waitall,commandchars=[\%\[\]]
> >>> int pid;
> >>> int status;
> >>>
> >>> for (;;) { //\lnlbl{loopa}
> >>> pid = wait(&status); //\lnlb{wait}
> >>> if (pid == -1) {
> >>> if (errno == ECHILD) //\lnlb{ECHILD}
> >>> break; //\lnlbl{break}
> >>> perror("wait"); //\lnlbl{perror}
> >>> exit(EXIT_FAILURE); //\lnlbl{exit}
> >>> }
> >>> poll(NULL, 0, 1);
> >>> } //\lnlbl{loopb}
> >>> }
> >>> // \end{snippet}
> >>> ...
> >>> ----
> >>>
> >>> , and it can be extracted and converted into CodeSamples/api-pthread/waitall.tex
> >>> in the following way (including substitution of escape charactors):
> >>>
> >>> \begin{Verbatim}[commandchars=[\%\[\]]
> >>> int pid;
> >>> int status;
> >>>
> >>> for (;;) {%lnlbl[ln:toolsoftrade:waitall:loopa]
> >>> pid = wait(&status);%lnlbl[ln:toolsoftrade:waitall:wait]
> >>> if (pid == -1) {
> >>> if (errno == ECHILD)%lnlbl[ln:toolsoftrade:waitall:ECHILD]
> >>> break;%lnlbl[ln:toolsoftrade:break]
> >>> perror("wait");%lnlbl[ln:toolsoftrade:perror]
> >>> exit(EXIT_FAILURE);%lnlbl[ln:toolsoftrade:exit]
> >>> }
> >>> poll(NULL, 0, 1);
> >>> }%lnlbl[ln:toolsoftrade:loopb]
> >>> }
> >>> \end{Verbatim}
> >>>
> >>> This file can be read in toolsoftrade.tex in the following way:
> >>>
> >>> ---
> >>> \begin{listing}[tbp]
> >>> \input{CodeSamples/api-pthread/waitall}
> >>> \caption{Using the \tco{wait()} Primitive}
> >>> \label{lst:toolsoftrade:Using the wait() Primitive}
> >>> \end{listing}
> >>> ---
> >>>
> >>> The conversion script should not be so hard to implement.
> >>> Update of build scripts should also be possible to automate these
> >>> conversions.
> >>>
> >>> If you'd like to use the caption of the listing in the final labels,
> >>> the caption should also be given in the meta \begin{snippet} command.
> >>> But for lines in code snippets, using file names as labels sounds
> >>> reasonable to me.
> >>
> >> I believe that your scheme is pretty close. My thought is directory,
> >> file, function, label. You have all but file already. That allows
> >> captions to change without changing the line label, which seems like a
> >> good thing.
> >
> > In the end, "chapter=foo,name=bar,func=baz" can be expressed as
> > "labelprefix=foo:bar:baz in the option to meta \begin{snippet} command.
>
> I meant:
>
> "labelprefix=foo:bar:baz"
Sounds very good, thank you!!!
Thanx, Paul
> Akira
>
> > So you can put any string you like there.
> >
> > I'll do v2 of the trial branch along this scheme, hopefully
> > including build script/Makefile updates. Maybe in a week or so.
> >
> > Thanks, Akira
> >
> >>
> >> Seem reasonable?
> >>
> >> Thanx, Paul
> >>
> >>> Thoughts?
> >>>
> >>> Thanks, Akira
> >>>
> >>>>
> >>>> Again, looks promising, thank you!
> >>>>
> >>>> Thanx, Paul
> >>>>
> >>>>> Thanks, Akira
> >>>>>
> >>>>> ---
> >>>>> The following changes since commit e3191997557e0d33b862e267fb4d5971e879ca07:
> >>>>>
> >>>>> utilities: Provide scripts instead of broken symlinks (2018-07-18 11:40:57 -0700)
> >>>>>
> >>>>> are available in the git repository at:
> >>>>>
> >>>>> https://github.com/akiyks/perfbook trial-fancyvrb
> >>>>>
> >>>>> for you to fetch changes up to 2154a175e469e6238c89d4c494d204a9ddbaa20a:
> >>>>>
> >>>>> [EXP] Update hyphen2endash (2018-07-21 09:17:34 +0900)
> >>>>>
> >>>>> ----------------------------------------------------------------
> >>>>> Akira Yokosawa (3):
> >>>>> [EXP] toolsoftrade: Add labels in code samples as comments
> >>>>> [EXP] toolsoftrade: Reference line in code snippets by label
> >>>>> [EXP] Update hyphen2endash
> >>>>>
> >>>>> CodeSamples/api-pthreads/api-pthreads.h | 14 +-
> >>>>> CodeSamples/toolsoftrade/forkjoinvar.c | 10 +-
> >>>>> CodeSamples/toolsoftrade/pcreate.c | 5 +-
> >>>>> perfbook.tex | 6 +
> >>>>> toolsoftrade/toolsoftrade.tex | 221 +++++++++++++++++---------------
> >>>>> utilities/hyphen2endash.sh | 3 +
> >>>>> 6 files changed, 141 insertions(+), 118 deletions(-)
> >>>>>
> >>>>
> >>>
> >>
> >
>
^ permalink raw reply
* [Intel-wired-lan] [PATCH v2 13/13] ice: Change struct members from bool to u8
From: Anirudh Venkataramanan @ 2018-07-23 22:05 UTC (permalink / raw)
To: intel-wired-lan
In-Reply-To: <20180723220520.16678-1-anirudh.venkataramanan@intel.com>
From: Bruce Allan <bruce.w.allan@intel.com>
Recent versions of checkpatch have a new warning based on a documented
preference of Linus to not use bool in structures due to wasted space and
the size of bool is implementation dependent. For more information, see
the email thread at https://lkml.org/lkml/2017/11/21/384.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
---
drivers/net/ethernet/intel/ice/ice.h | 8 ++++----
drivers/net/ethernet/intel/ice/ice_switch.h | 6 +++---
drivers/net/ethernet/intel/ice/ice_txrx.h | 2 +-
drivers/net/ethernet/intel/ice/ice_type.h | 16 ++++++++--------
4 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h
index ed071ea75f20..868f4a1d0f72 100644
--- a/drivers/net/ethernet/intel/ice/ice.h
+++ b/drivers/net/ethernet/intel/ice/ice.h
@@ -196,9 +196,9 @@ struct ice_vsi {
struct list_head tmp_sync_list; /* MAC filters to be synced */
struct list_head tmp_unsync_list; /* MAC filters to be unsynced */
- bool irqs_ready;
- bool current_isup; /* Sync 'link up' logging */
- bool stat_offsets_loaded;
+ u8 irqs_ready;
+ u8 current_isup; /* Sync 'link up' logging */
+ u8 stat_offsets_loaded;
/* queue information */
u8 tx_mapping_mode; /* ICE_MAP_MODE_[CONTIG|SCATTER] */
@@ -269,7 +269,7 @@ struct ice_pf {
struct ice_hw_port_stats stats;
struct ice_hw_port_stats stats_prev;
struct ice_hw hw;
- bool stat_prev_loaded; /* has previous stats been loaded */
+ u8 stat_prev_loaded; /* has previous stats been loaded */
char int_name[ICE_INT_NAME_STR_LEN];
};
diff --git a/drivers/net/ethernet/intel/ice/ice_switch.h b/drivers/net/ethernet/intel/ice/ice_switch.h
index 6f4a0d159dbf..9b8ec128ee31 100644
--- a/drivers/net/ethernet/intel/ice/ice_switch.h
+++ b/drivers/net/ethernet/intel/ice/ice_switch.h
@@ -17,7 +17,7 @@ struct ice_vsi_ctx {
u16 vsis_unallocated;
u16 flags;
struct ice_aqc_vsi_props info;
- bool alloc_from_pool;
+ u8 alloc_from_pool;
};
enum ice_sw_fwd_act_type {
@@ -94,8 +94,8 @@ struct ice_fltr_info {
u8 qgrp_size;
/* Rule creations populate these indicators basing on the switch type */
- bool lb_en; /* Indicate if packet can be looped back */
- bool lan_en; /* Indicate if packet can be forwarded to the uplink */
+ u8 lb_en; /* Indicate if packet can be looped back */
+ u8 lan_en; /* Indicate if packet can be forwarded to the uplink */
};
/* Bookkeeping structure to hold bitmap of VSIs corresponding to VSI list id */
diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.h b/drivers/net/ethernet/intel/ice/ice_txrx.h
index 567067b650c4..31bc998fe200 100644
--- a/drivers/net/ethernet/intel/ice/ice_txrx.h
+++ b/drivers/net/ethernet/intel/ice/ice_txrx.h
@@ -143,7 +143,7 @@ struct ice_ring {
u16 next_to_use;
u16 next_to_clean;
- bool ring_active; /* is ring online or not */
+ u8 ring_active; /* is ring online or not */
/* stats structs */
struct ice_q_stats stats;
diff --git a/drivers/net/ethernet/intel/ice/ice_type.h b/drivers/net/ethernet/intel/ice/ice_type.h
index 99c8a9a71b5e..97c366e0ca59 100644
--- a/drivers/net/ethernet/intel/ice/ice_type.h
+++ b/drivers/net/ethernet/intel/ice/ice_type.h
@@ -83,7 +83,7 @@ struct ice_link_status {
u64 phy_type_low;
u16 max_frame_size;
u16 link_speed;
- bool lse_ena; /* Link Status Event notification */
+ u8 lse_ena; /* Link Status Event notification */
u8 link_info;
u8 an_info;
u8 ext_info;
@@ -101,7 +101,7 @@ struct ice_phy_info {
struct ice_link_status link_info_old;
u64 phy_type_low;
enum ice_media_type media_type;
- bool get_link_info;
+ u8 get_link_info;
};
/* Common HW capabilities for SW use */
@@ -167,7 +167,7 @@ struct ice_nvm_info {
u32 oem_ver; /* OEM version info */
u16 sr_words; /* Shadow RAM size in words */
u16 ver; /* NVM package version */
- bool blank_nvm_mode; /* is NVM empty (no FW present) */
+ u8 blank_nvm_mode; /* is NVM empty (no FW present) */
};
/* Max number of port to queue branches w.r.t topology */
@@ -181,7 +181,7 @@ struct ice_sched_node {
struct ice_aqc_txsched_elem_data info;
u32 agg_id; /* aggregator group id */
u16 vsi_id;
- bool in_use; /* suspended or in use */
+ u8 in_use; /* suspended or in use */
u8 tx_sched_layer; /* Logical Layer (1-9) */
u8 num_children;
u8 tc_num;
@@ -218,7 +218,7 @@ struct ice_sched_vsi_info {
struct ice_sched_tx_policy {
u16 max_num_vsis;
u8 max_num_lan_qs_per_tc[ICE_MAX_TRAFFIC_CLASS];
- bool rdma_ena;
+ u8 rdma_ena;
};
struct ice_port_info {
@@ -243,7 +243,7 @@ struct ice_port_info {
struct list_head agg_list; /* lists all aggregator */
u8 lport;
#define ICE_LPORT_MASK 0xff
- bool is_vf;
+ u8 is_vf;
};
struct ice_switch_info {
@@ -287,7 +287,7 @@ struct ice_hw {
u8 max_cgds;
u8 sw_entry_point_layer;
- bool evb_veb; /* true for VEB, false for VEPA */
+ u8 evb_veb; /* true for VEB, false for VEPA */
struct ice_bus_info bus;
struct ice_nvm_info nvm;
struct ice_hw_dev_caps dev_caps; /* device capabilities */
@@ -318,7 +318,7 @@ struct ice_hw {
u8 itr_gran_100;
u8 itr_gran_50;
u8 itr_gran_25;
- bool ucast_shared; /* true if VSIs can share unicast addr */
+ u8 ucast_shared; /* true if VSIs can share unicast addr */
};
--
2.14.3
^ permalink raw reply related
* [Intel-wired-lan] [PATCH v2 12/13] ice: Fix potential return of uninitialized value
From: Anirudh Venkataramanan @ 2018-07-23 22:05 UTC (permalink / raw)
To: intel-wired-lan
In-Reply-To: <20180723220520.16678-1-anirudh.venkataramanan@intel.com>
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
In ice_vsi_setup_[tx|rx]_rings, err is uninitialized which can result in
a garbage value return to the caller. Fix that.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
---
[Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> cleaned up commit message]
---
drivers/net/ethernet/intel/ice/ice_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index e5b8eb0c4581..3782569b450a 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -4887,7 +4887,7 @@ int ice_down(struct ice_vsi *vsi)
*/
static int ice_vsi_setup_tx_rings(struct ice_vsi *vsi)
{
- int i, err;
+ int i, err = 0;
if (!vsi->num_txq) {
dev_err(&vsi->back->pdev->dev, "VSI %d has 0 Tx queues\n",
@@ -4912,7 +4912,7 @@ static int ice_vsi_setup_tx_rings(struct ice_vsi *vsi)
*/
static int ice_vsi_setup_rx_rings(struct ice_vsi *vsi)
{
- int i, err;
+ int i, err = 0;
if (!vsi->num_rxq) {
dev_err(&vsi->back->pdev->dev, "VSI %d has 0 Rx queues\n",
--
2.14.3
^ permalink raw reply related
* [Intel-wired-lan] [PATCH v2 11/13] ice: Fix couple of null pointer dereference issues
From: Anirudh Venkataramanan @ 2018-07-23 22:05 UTC (permalink / raw)
To: intel-wired-lan
In-Reply-To: <20180723220520.16678-1-anirudh.venkataramanan@intel.com>
When ice_ena_msix_range() fails to reserve vectors, a devm_kfree() warning
was seen in the error flow path. So check pf->irq_tracker before use in
ice_clear_interrupt_scheme().
In ice_vsi_cfg(), check vsi->netdev before use.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
---
drivers/net/ethernet/intel/ice/ice_main.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index bcd39654ab4b..e5b8eb0c4581 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -3259,8 +3259,10 @@ static void ice_clear_interrupt_scheme(struct ice_pf *pf)
if (test_bit(ICE_FLAG_MSIX_ENA, pf->flags))
ice_dis_msix(pf);
- devm_kfree(&pf->pdev->dev, pf->irq_tracker);
- pf->irq_tracker = NULL;
+ if (pf->irq_tracker) {
+ devm_kfree(&pf->pdev->dev, pf->irq_tracker);
+ pf->irq_tracker = NULL;
+ }
}
/**
@@ -4114,11 +4116,12 @@ static int ice_vsi_cfg(struct ice_vsi *vsi)
{
int err;
- ice_set_rx_mode(vsi->netdev);
-
- err = ice_restore_vlan(vsi);
- if (err)
- return err;
+ if (vsi->netdev) {
+ ice_set_rx_mode(vsi->netdev);
+ err = ice_restore_vlan(vsi);
+ if (err)
+ return err;
+ }
err = ice_vsi_cfg_txqs(vsi);
if (!err)
--
2.14.3
^ permalink raw reply related
* [Intel-wired-lan] [PATCH v2 10/13] ice: Update to interrupts enabled in OICR
From: Anirudh Venkataramanan @ 2018-07-23 22:05 UTC (permalink / raw)
To: intel-wired-lan
In-Reply-To: <20180723220520.16678-1-anirudh.venkataramanan@intel.com>
From: Bruce Allan <bruce.w.allan@intel.com>
Remove the following interrupt causes that are not applicable or not
handled:
- PFINT_OICR_HLP_RDY_M
- PFINT_OICR_CPM_RDY_M
- PFINT_OICR_GPIO_M
- PFINT_OICR_STORM_DETECT_M
Add the following interrupt cause that's actually handled in ice_misc_intr:
- PFINT_OICR_PE_CRITERR_M
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
---
[Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Removed defines from ice_hw_autogen.h]
---
drivers/net/ethernet/intel/ice/ice_hw_autogen.h | 8 --------
drivers/net/ethernet/intel/ice/ice_main.c | 9 +++------
2 files changed, 3 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_hw_autogen.h b/drivers/net/ethernet/intel/ice/ice_hw_autogen.h
index 499904874b3f..6076fc87df9d 100644
--- a/drivers/net/ethernet/intel/ice/ice_hw_autogen.h
+++ b/drivers/net/ethernet/intel/ice/ice_hw_autogen.h
@@ -121,10 +121,6 @@
#define PFINT_FW_CTL_CAUSE_ENA_S 30
#define PFINT_FW_CTL_CAUSE_ENA_M BIT(PFINT_FW_CTL_CAUSE_ENA_S)
#define PFINT_OICR 0x0016CA00
-#define PFINT_OICR_HLP_RDY_S 14
-#define PFINT_OICR_HLP_RDY_M BIT(PFINT_OICR_HLP_RDY_S)
-#define PFINT_OICR_CPM_RDY_S 15
-#define PFINT_OICR_CPM_RDY_M BIT(PFINT_OICR_CPM_RDY_S)
#define PFINT_OICR_ECC_ERR_S 16
#define PFINT_OICR_ECC_ERR_M BIT(PFINT_OICR_ECC_ERR_S)
#define PFINT_OICR_MAL_DETECT_S 19
@@ -133,10 +129,6 @@
#define PFINT_OICR_GRST_M BIT(PFINT_OICR_GRST_S)
#define PFINT_OICR_PCI_EXCEPTION_S 21
#define PFINT_OICR_PCI_EXCEPTION_M BIT(PFINT_OICR_PCI_EXCEPTION_S)
-#define PFINT_OICR_GPIO_S 22
-#define PFINT_OICR_GPIO_M BIT(PFINT_OICR_GPIO_S)
-#define PFINT_OICR_STORM_DETECT_S 24
-#define PFINT_OICR_STORM_DETECT_M BIT(PFINT_OICR_STORM_DETECT_S)
#define PFINT_OICR_HMC_ERR_S 26
#define PFINT_OICR_HMC_ERR_M BIT(PFINT_OICR_HMC_ERR_S)
#define PFINT_OICR_PE_CRITERR_S 28
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 71cc5b6e6237..bcd39654ab4b 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -1702,15 +1702,12 @@ static void ice_ena_misc_vector(struct ice_pf *pf)
wr32(hw, PFINT_OICR_ENA, 0); /* disable all */
rd32(hw, PFINT_OICR); /* read to clear */
- val = (PFINT_OICR_HLP_RDY_M |
- PFINT_OICR_CPM_RDY_M |
- PFINT_OICR_ECC_ERR_M |
+ val = (PFINT_OICR_ECC_ERR_M |
PFINT_OICR_MAL_DETECT_M |
PFINT_OICR_GRST_M |
PFINT_OICR_PCI_EXCEPTION_M |
- PFINT_OICR_GPIO_M |
- PFINT_OICR_STORM_DETECT_M |
- PFINT_OICR_HMC_ERR_M);
+ PFINT_OICR_HMC_ERR_M |
+ PFINT_OICR_PE_CRITERR_M);
wr32(hw, PFINT_OICR_ENA, val);
--
2.14.3
^ permalink raw reply related
* [Intel-wired-lan] [PATCH v2 09/13] ice: Set VLAN flags correctly
From: Anirudh Venkataramanan @ 2018-07-23 22:05 UTC (permalink / raw)
To: intel-wired-lan
In-Reply-To: <20180723220520.16678-1-anirudh.venkataramanan@intel.com>
From: Brett Creeley <brett.creeley@intel.com>
Set the ICE_AQ_VSI_PVLAN_MODE_ALL bit to allow the driver to add a VLAN
tag to all packets it sends.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
---
[Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> cleaned up commit message]
---
drivers/net/ethernet/intel/ice/ice_main.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 586c6e615a98..71cc5b6e6237 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -3779,6 +3779,9 @@ static int ice_vsi_manage_vlan_stripping(struct ice_vsi *vsi, bool ena)
ctxt.info.port_vlan_flags = ICE_AQ_VSI_PVLAN_EMOD_NOTHING;
}
+ /* Allow all packets untagged/tagged */
+ ctxt.info.port_vlan_flags |= ICE_AQ_VSI_PVLAN_MODE_ALL;
+
ctxt.info.valid_sections = cpu_to_le16(ICE_AQ_VSI_PROP_VLAN_VALID);
ctxt.vsi_num = vsi->vsi_num;
--
2.14.3
^ permalink raw reply related
* [Intel-wired-lan] [PATCH v2 08/13] ice: Don't explicitly set port_vlan_bits to 0
From: Anirudh Venkataramanan @ 2018-07-23 22:05 UTC (permalink / raw)
To: intel-wired-lan
In-Reply-To: <20180723220520.16678-1-anirudh.venkataramanan@intel.com>
From: Brett Creeley <brett.creeley@intel.com>
This patch fixes the following smatch warning originally reported by
Dan Carpenter:
ice_set_dflt_vsi_ctx() warn: odd binop '0x0 & 0x18'
In ice_set_dflt_vsi_ctx() we clear bits 3 and 4 for legacy behavior
(i.e. show VLAN, DEI and UP in the receive descriptors). However
the logic to do this generated the above mentioned smatch warning.
Bits 3 and 4 in port_vlan_flags are anyway set to zero by the memset on
ctxt->info field, so remove the logic to set these explicitly to 0. This
fixes the smatch warning as well.
CC: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
---
[Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> rewrote commit message]
---
drivers/net/ethernet/intel/ice/ice_main.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index feeca75912ec..586c6e615a98 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -1367,14 +1367,13 @@ static void ice_set_dflt_vsi_ctx(struct ice_vsi_ctx *ctxt)
ctxt->info.sw_flags = ICE_AQ_VSI_SW_FLAG_SRC_PRUNE;
/* Traffic from VSI can be sent to LAN */
ctxt->info.sw_flags2 = ICE_AQ_VSI_SW_FLAG_LAN_ENA;
- /* Allow all packets untagged/tagged */
+ /* By default bits 3 and 4 in port_vlan_flags are 0's which results in
+ * legacy behavior (show VLAN, DEI, and UP) in descriptor. Also, allow
+ * all packets untagged/tagged.
+ */
ctxt->info.port_vlan_flags = ((ICE_AQ_VSI_PVLAN_MODE_ALL &
ICE_AQ_VSI_PVLAN_MODE_M) >>
ICE_AQ_VSI_PVLAN_MODE_S);
- /* Show VLAN/UP from packets in Rx descriptors */
- ctxt->info.port_vlan_flags |= ((ICE_AQ_VSI_PVLAN_EMOD_STR_BOTH &
- ICE_AQ_VSI_PVLAN_EMOD_M) >>
- ICE_AQ_VSI_PVLAN_EMOD_S);
/* Have 1:1 UP mapping for both ingress/egress tables */
table |= ICE_UP_TABLE_TRANSLATE(0, 0);
table |= ICE_UP_TABLE_TRANSLATE(1, 1);
--
2.14.3
^ permalink raw reply related
* [Intel-wired-lan] [PATCH v2 07/13] ice: Use order_base_2 to calculate higher power of 2
From: Anirudh Venkataramanan @ 2018-07-23 22:05 UTC (permalink / raw)
To: intel-wired-lan
In-Reply-To: <20180723220520.16678-1-anirudh.venkataramanan@intel.com>
From: Jacob Keller <jacob.e.keller@intel.com>
Currently, we use a combination of ilog2 and is_power_of_2() to
calculate the next power of 2 for the qcount. This appears to be causing
a warning on some combinations of GCC and the Linux kernel:
MODPOST 1 modules
WARNING: "____ilog2_NaN" [ice.ko] undefined!
This appears to because because GCC realizes that qcount could be zero
in some circumstances and thus attempts to link against the
intentionally undefined ___ilog2_NaN function.
The order_base_2 function is intentionally defined to return 0 when
passed 0 as an argument, and thus will be safe to use here.
This not only fixes the warning but makes the resulting code slightly
cleaner, and is really what we should have used originally.
Also update the comment to make it more clear that we are rounding up,
not just incrementing the ilog2 of qcount unconditionally.
Without this patch, we get warnings when building against the upstream
kernel.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
---
[Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> minor cleanup for upstream submission]
---
drivers/net/ethernet/intel/ice/ice_main.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 81b04e1d7ea2..feeca75912ec 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -1313,11 +1313,8 @@ static void ice_vsi_setup_q_map(struct ice_vsi *vsi, struct ice_vsi_ctx *ctxt)
qcount = numq_tc;
}
- /* find higher power-of-2 of qcount */
- pow = ilog2(qcount);
-
- if (!is_power_of_2(qcount))
- pow++;
+ /* find the (rounded up) power-of-2 of qcount */
+ pow = order_base_2(qcount);
for (i = 0; i < ICE_MAX_TRAFFIC_CLASS; i++) {
if (!(vsi->tc_cfg.ena_tc & BIT(i))) {
--
2.14.3
^ permalink raw reply related
* [Intel-wired-lan] [PATCH v2 06/13] ice: Fix bugs in control queue processing
From: Anirudh Venkataramanan @ 2018-07-23 22:05 UTC (permalink / raw)
To: intel-wired-lan
In-Reply-To: <20180723220520.16678-1-anirudh.venkataramanan@intel.com>
This patch is a consolidation of multiple bug fixes for control queue
processing.
1) In ice_clean_adminq_subtask() remove unnecessary reads/writes to
registers. The bits PFINT_FW_CTL, PFINT_MBX_CTL and PFINT_SB_CTL
are not set when an interrupt arrives, which means that clearing them
again can be omitted.
2) Get an accurate value in "pending" by re-reading the control queue
head register from the hardware.
3) Fix a corner case involving lost control queue messages by checking
for new control messages (using ice_ctrlq_pending) before exiting the
cleanup routine.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
---
drivers/net/ethernet/intel/ice/ice_controlq.c | 5 ++++-
drivers/net/ethernet/intel/ice/ice_main.c | 26 ++++++++++++++++++++++----
2 files changed, 26 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_controlq.c b/drivers/net/ethernet/intel/ice/ice_controlq.c
index c064416080e7..62be72fdc8f3 100644
--- a/drivers/net/ethernet/intel/ice/ice_controlq.c
+++ b/drivers/net/ethernet/intel/ice/ice_controlq.c
@@ -1065,8 +1065,11 @@ ice_clean_rq_elem(struct ice_hw *hw, struct ice_ctl_q_info *cq,
clean_rq_elem_out:
/* Set pending if needed, unlock and return */
- if (pending)
+ if (pending) {
+ /* re-read HW head to calculate actual pending messages */
+ ntu = (u16)(rd32(hw, cq->rq.head) & cq->rq.head_mask);
*pending = (u16)((ntc > ntu ? cq->rq.count : 0) + (ntu - ntc));
+ }
clean_rq_elem_err:
mutex_unlock(&cq->rq_lock);
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 450911345144..81b04e1d7ea2 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -916,6 +916,21 @@ static int __ice_clean_ctrlq(struct ice_pf *pf, enum ice_ctl_q q_type)
return pending && (i == ICE_DFLT_IRQ_WORK);
}
+/**
+ * ice_ctrlq_pending - check if there is a difference between ntc and ntu
+ * @hw: pointer to hardware info
+ * @cq: control queue information
+ *
+ * returns true if there are pending messages in a queue, false if there aren't
+ */
+static bool ice_ctrlq_pending(struct ice_hw *hw, struct ice_ctl_q_info *cq)
+{
+ u16 ntu;
+
+ ntu = (u16)(rd32(hw, cq->rq.head) & cq->rq.head_mask);
+ return cq->rq.next_to_clean != ntu;
+}
+
/**
* ice_clean_adminq_subtask - clean the AdminQ rings
* @pf: board private structure
@@ -923,7 +938,6 @@ static int __ice_clean_ctrlq(struct ice_pf *pf, enum ice_ctl_q q_type)
static void ice_clean_adminq_subtask(struct ice_pf *pf)
{
struct ice_hw *hw = &pf->hw;
- u32 val;
if (!test_bit(__ICE_ADMINQ_EVENT_PENDING, pf->state))
return;
@@ -933,9 +947,13 @@ static void ice_clean_adminq_subtask(struct ice_pf *pf)
clear_bit(__ICE_ADMINQ_EVENT_PENDING, pf->state);
- /* re-enable Admin queue interrupt causes */
- val = rd32(hw, PFINT_FW_CTL);
- wr32(hw, PFINT_FW_CTL, (val | PFINT_FW_CTL_CAUSE_ENA_M));
+ /* There might be a situation where new messages arrive to a control
+ * queue between processing the last message and clearing the
+ * EVENT_PENDING bit. So before exiting, check queue head again (using
+ * ice_ctrlq_pending) and process new messages if any.
+ */
+ if (ice_ctrlq_pending(hw, &hw->adminq))
+ __ice_clean_ctrlq(pf, ICE_CTL_Q_ADMIN);
ice_flush(hw);
}
--
2.14.3
^ permalink raw reply related
* [Intel-wired-lan] [PATCH v2 05/13] ice: Clean control queues only when they are initialized
From: Anirudh Venkataramanan @ 2018-07-23 22:05 UTC (permalink / raw)
To: intel-wired-lan
In-Reply-To: <20180723220520.16678-1-anirudh.venkataramanan@intel.com>
From: Preethi Banala <preethi.banala@intel.com>
Clean control queues only when they are initialized. One of the ways to
validate if the basic initialization is done is by checking value of
cq->sq.head and cq->rq.head variables that specify the register address.
This patch adds a check to avoid NULL pointer dereference crash when tried
to shutdown uninitialized control queue.
Signed-off-by: Preethi Banala <preethi.banala@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
---
drivers/net/ethernet/intel/ice/ice_controlq.c | 24 ++++++++++++++++--------
1 file changed, 16 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_controlq.c b/drivers/net/ethernet/intel/ice/ice_controlq.c
index 7c511f144ed6..c064416080e7 100644
--- a/drivers/net/ethernet/intel/ice/ice_controlq.c
+++ b/drivers/net/ethernet/intel/ice/ice_controlq.c
@@ -597,10 +597,14 @@ static enum ice_status ice_init_check_adminq(struct ice_hw *hw)
return 0;
init_ctrlq_free_rq:
- ice_shutdown_rq(hw, cq);
- ice_shutdown_sq(hw, cq);
- mutex_destroy(&cq->sq_lock);
- mutex_destroy(&cq->rq_lock);
+ if (cq->rq.head) {
+ ice_shutdown_rq(hw, cq);
+ mutex_destroy(&cq->rq_lock);
+ }
+ if (cq->sq.head) {
+ ice_shutdown_sq(hw, cq);
+ mutex_destroy(&cq->sq_lock);
+ }
return status;
}
@@ -706,10 +710,14 @@ static void ice_shutdown_ctrlq(struct ice_hw *hw, enum ice_ctl_q q_type)
return;
}
- ice_shutdown_sq(hw, cq);
- ice_shutdown_rq(hw, cq);
- mutex_destroy(&cq->sq_lock);
- mutex_destroy(&cq->rq_lock);
+ if (cq->sq.head) {
+ ice_shutdown_sq(hw, cq);
+ mutex_destroy(&cq->sq_lock);
+ }
+ if (cq->rq.head) {
+ ice_shutdown_rq(hw, cq);
+ mutex_destroy(&cq->rq_lock);
+ }
}
/**
--
2.14.3
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.