* speed of card?
@ 2017-06-19 17:00 James
2017-06-19 17:18 ` Ilia Mirkin
0 siblings, 1 reply; 6+ messages in thread
From: James @ 2017-06-19 17:00 UTC (permalink / raw)
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
I have a NVE7 (GK107).
How do I see the current memory/CPU speed?
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: speed of card?
2017-06-19 17:00 speed of card? James
@ 2017-06-19 17:18 ` Ilia Mirkin
[not found] ` <CAKb7Uvhii0ST6+TH_O5EAR2Lx6j2ACSfD-W3Td5SG6-iUP_jUw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 6+ messages in thread
From: Ilia Mirkin @ 2017-06-19 17:18 UTC (permalink / raw)
To: James; +Cc: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
cat /sys/kernel/debug/dri/0/pstate
AC (or DC) line shows the current state.
On Mon, Jun 19, 2017 at 1:00 PM, James <bjlockie@lockie.ca> wrote:
> I have a NVE7 (GK107).
> How do I see the current memory/CPU speed?
>
>
>
> _______________________________________________
> Nouveau mailing list
> Nouveau@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/nouveau
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: speed of card?
[not found] ` <CAKb7Uvhii0ST6+TH_O5EAR2Lx6j2ACSfD-W3Td5SG6-iUP_jUw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2017-06-19 17:32 ` James
2017-06-19 17:38 ` Ilia Mirkin
0 siblings, 1 reply; 6+ messages in thread
From: James @ 2017-06-19 17:32 UTC (permalink / raw)
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
On 2017-06-19 01:18 PM, Ilia Mirkin wrote:
> cat /sys/kernel/debug/dri/0/pstate
>
> AC (or DC) line shows the current state.
>
> On Mon, Jun 19, 2017 at 1:00 PM, James <bjlockie@lockie.ca> wrote:
>> I have a NVE7 (GK107).
>> How do I see the current memory/CPU speed?
$ sudo cat /sys/kernel/debug/dri/0/pstate
07: core 324 MHz memory 648 MHz
0a: core 540 MHz memory 1620 MHz
0f: core 1058 MHz memory 5000 MHz
AC: core 324 MHz memory 648 MHz
Wow, it defaults to the lowest.
Is there a way to change it?
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: speed of card?
2017-06-19 17:32 ` James
@ 2017-06-19 17:38 ` Ilia Mirkin
[not found] ` <CAKb7UvhWFb5Cmf+rna-=2p2gPLzSDzgvw=QzOSLic5rbGvo8Ug-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 6+ messages in thread
From: Ilia Mirkin @ 2017-06-19 17:38 UTC (permalink / raw)
To: James; +Cc: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
On Mon, Jun 19, 2017 at 1:32 PM, James <bjlockie@lockie.ca> wrote:
> On 2017-06-19 01:18 PM, Ilia Mirkin wrote:
>> cat /sys/kernel/debug/dri/0/pstate
>>
>> AC (or DC) line shows the current state.
>>
>> On Mon, Jun 19, 2017 at 1:00 PM, James <bjlockie@lockie.ca> wrote:
>>> I have a NVE7 (GK107).
>>> How do I see the current memory/CPU speed?
>
> $ sudo cat /sys/kernel/debug/dri/0/pstate
> 07: core 324 MHz memory 648 MHz
> 0a: core 540 MHz memory 1620 MHz
> 0f: core 1058 MHz memory 5000 MHz
> AC: core 324 MHz memory 648 MHz
>
> Wow, it defaults to the lowest.
Defaults to whatever state the VBIOS puts it into.
> Is there a way to change it?
echo 0a > /sys/kernel/...
Note that you really want to be on kernel 4.10 or so in order for this
to work well. (Working poorly = failure to reclock, or system hang
afterwards.)
-ilia
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: speed of card?
[not found] ` <CAKb7UvhWFb5Cmf+rna-=2p2gPLzSDzgvw=QzOSLic5rbGvo8Ug-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2017-06-20 15:35 ` James
2017-06-20 15:50 ` Karol Herbst
0 siblings, 1 reply; 6+ messages in thread
From: James @ 2017-06-20 15:35 UTC (permalink / raw)
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
On 2017-06-19 01:38 PM, Ilia Mirkin wrote:
> On Mon, Jun 19, 2017 at 1:32 PM, James <bjlockie@lockie.ca> wrote:
>> On 2017-06-19 01:18 PM, Ilia Mirkin wrote:
>>> cat /sys/kernel/debug/dri/0/pstate
>>>
>>> AC (or DC) line shows the current state.
>>>
>>> On Mon, Jun 19, 2017 at 1:00 PM, James <bjlockie@lockie.ca> wrote:
>>>> I have a NVE7 (GK107).
>>>> How do I see the current memory/CPU speed?
>>
>> $ sudo cat /sys/kernel/debug/dri/0/pstate
>> 07: core 324 MHz memory 648 MHz
>> 0a: core 540 MHz memory 1620 MHz
>> 0f: core 1058 MHz memory 5000 MHz
>> AC: core 324 MHz memory 648 MHz
>>
>> Wow, it defaults to the lowest.
>
> Defaults to whatever state the VBIOS puts it into.
>
>> Is there a way to change it?
>
> echo 0a > /sys/kernel/...
I did 0f. :-)
The card temp (sensors) went from 44 degrees to 53.
Is that still an ok temp?
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: speed of card?
2017-06-20 15:35 ` James
@ 2017-06-20 15:50 ` Karol Herbst
0 siblings, 0 replies; 6+ messages in thread
From: Karol Herbst @ 2017-06-20 15:50 UTC (permalink / raw)
To: James; +Cc: ML nouveau
On Tue, Jun 20, 2017 at 5:35 PM, James <bjlockie@lockie.ca> wrote:
> On 2017-06-19 01:38 PM, Ilia Mirkin wrote:
>> On Mon, Jun 19, 2017 at 1:32 PM, James <bjlockie@lockie.ca> wrote:
>>> On 2017-06-19 01:18 PM, Ilia Mirkin wrote:
>>>> cat /sys/kernel/debug/dri/0/pstate
>>>>
>>>> AC (or DC) line shows the current state.
>>>>
>>>> On Mon, Jun 19, 2017 at 1:00 PM, James <bjlockie@lockie.ca> wrote:
>>>>> I have a NVE7 (GK107).
>>>>> How do I see the current memory/CPU speed?
>>>
>>> $ sudo cat /sys/kernel/debug/dri/0/pstate
>>> 07: core 324 MHz memory 648 MHz
>>> 0a: core 540 MHz memory 1620 MHz
>>> 0f: core 1058 MHz memory 5000 MHz
>>> AC: core 324 MHz memory 648 MHz
>>>
>>> Wow, it defaults to the lowest.
>>
>> Defaults to whatever state the VBIOS puts it into.
>>
>>> Is there a way to change it?
>>
>> echo 0a > /sys/kernel/...
>
> I did 0f. :-)
> The card temp (sensors) went from 44 degrees to 53.
> Is that still an ok temp?
>
yes. Everything below 90°C is fine and the GPUs are usually setup in a
way to protect themselves against overheating.
> _______________________________________________
> Nouveau mailing list
> Nouveau@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/nouveau
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-06-20 15:50 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-06-19 17:00 speed of card? James
2017-06-19 17:18 ` Ilia Mirkin
[not found] ` <CAKb7Uvhii0ST6+TH_O5EAR2Lx6j2ACSfD-W3Td5SG6-iUP_jUw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-06-19 17:32 ` James
2017-06-19 17:38 ` Ilia Mirkin
[not found] ` <CAKb7UvhWFb5Cmf+rna-=2p2gPLzSDzgvw=QzOSLic5rbGvo8Ug-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-06-20 15:35 ` James
2017-06-20 15:50 ` Karol Herbst
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.