* [xen-unstable-smoke test] 121953: regressions - FAIL
@ 2018-04-06 6:21 osstest service owner
0 siblings, 0 replies; only message in thread
From: osstest service owner @ 2018-04-06 6:21 UTC (permalink / raw)
To: xen-devel, osstest-admin
[-- Attachment #1: Type: text/plain, Size: 9630 bytes --]
flight 121953 xen-unstable-smoke real [real]
http://logs.test-lab.xenproject.org/osstest/logs/121953/
Regressions :-(
Tests which did not succeed and are blocking,
including tests which could not be run:
build-arm64-xsm 6 xen-build fail REGR. vs. 121876
build-armhf 6 xen-build fail REGR. vs. 121876
Tests which did not succeed, but are not blocking:
test-armhf-armhf-xl 1 build-check(1) blocked n/a
test-arm64-arm64-xl-xsm 1 build-check(1) blocked n/a
test-amd64-amd64-libvirt 13 migrate-support-check fail never pass
version targeted for testing:
xen 18d12056ccea435dca7fcbe2085fff15bca19046
baseline version:
xen 451004603247205467ec34b366b4cfa3814a5d95
Last test of basis 121876 2018-04-05 10:04:25 Z 0 days
Failing since 121889 2018-04-05 13:02:10 Z 0 days 6 attempts
Testing same since 121920 2018-04-05 19:01:57 Z 0 days 4 attempts
------------------------------------------------------------
People who touched revisions under test:
Andrew Cooper <andrew.cooper3@citrix.com>
George Dunlap <george.dunlap@citrix.com>
Jan Beulich <jbeulich@suse.com>
Juergen Gross <jgross@suse.com>
Julien Grall <julien.grall@arm.com>
Kevin Tian <kevin.tian@intel.com>
Wei Liu <wei.liu2@citrix.com>
jobs:
build-arm64-xsm fail
build-amd64 pass
build-armhf fail
build-amd64-libvirt pass
test-armhf-armhf-xl blocked
test-arm64-arm64-xl-xsm blocked
test-amd64-amd64-xl-qemuu-debianhvm-i386 pass
test-amd64-amd64-libvirt pass
------------------------------------------------------------
sg-report-flight on osstest.test-lab.xenproject.org
logs: /home/logs/logs
images: /home/logs/images
Logs, config files, etc. are available at
http://logs.test-lab.xenproject.org/osstest/logs
Explanation of these reports, and of osstest in general, is at
http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master
http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master
Test harness code can be found at
http://xenbits.xen.org/gitweb?p=osstest.git;a=summary
Not pushing.
------------------------------------------------------------
commit 18d12056ccea435dca7fcbe2085fff15bca19046
Author: Julien Grall <julien.grall@arm.com>
Date: Wed Feb 21 13:46:25 2018 +0000
xen/pdx: Introduce helper to convert MFN <-> PDX
This will avoid use of pfn_to_pdx(mfn_x(mfn)) over the code base.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
commit cf2239a6288c7095583d3351f5024ab8c1e37f87
Author: Julien Grall <julien.grall@arm.com>
Date: Wed Feb 21 13:46:24 2018 +0000
xen/x86: mm: Switch x86/mm.c to use typesafe for virt_to_mfn
No functional change intended.
While we are here, use PFN_DOWN() rather than open coding it.
Signed-off Julien Grall <julien.grall@arm.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
commit da588a0dbe76c52fdfd90582bf560643a1f9eb20
Author: Julien Grall <julien.grall@arm.com>
Date: Wed Feb 21 13:46:24 2018 +0000
xen/x86: Remove unused override of page_to_mfn/mfn_to_page
A few files override page_to_mfn/mfn_to_page but actually never use
those macros. So drop them.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
commit acf92c83b58e404374300397801deb80fb8d883e
Author: Wei Liu <wei.liu2@citrix.com>
Date: Fri Mar 9 17:20:14 2018 +0000
x86/mm: skip incrementing mfn if it is not a valid mfn
In a follow-up patch, some callers will be switched to pass
INVALID_MFN instead of zero for non-present mappings. So skip
incrementing mfn if it is not a valid one.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
commit 454efb2a31b64b98e3dd55c083ce41b87375faa6
Author: Jan Beulich <JBeulich@suse.com>
Date: Mon Mar 19 07:40:12 2018 -0600
x86/XPTI: reduce .text.entry
This exposes less code pieces and at the same time reduces the range
covered from slightly above 3 pages to a little below 2 of them.
The code being moved is unchanged, except for the removal of trailing
blanks, insertion of blanks between operands, and a pointless q suffix
from "retq".
A few more small pieces could be moved, but it seems better to me to
leave them where they are to not make it overly hard to follow code
paths.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
commit 442b303cdaf7d774c0be8096fe5dbab68701abd3
Author: Jan Beulich <JBeulich@suse.com>
Date: Mon Mar 19 07:39:04 2018 -0600
x86: log XPTI enabled status
At the same time also report the state of the two defined
ARCH_CAPABILITIES MSR bits. To avoid further complicating the
conditional around that printk(), drop it (it's a debug level one only
anyway).
Issue the main message without any XENLOG_*, and also drop XENLOG_INFO
from the respective BTI message, to make sure they're visible at default
log level also in release builds.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
commit bee0732d2066691d8204e418d10110930ee4d4f8
Author: Jan Beulich <JBeulich@suse.com>
Date: Mon Mar 19 07:37:54 2018 -0600
x86: disable XPTI when RDCL_NO
Use the respective ARCH_CAPABILITIES MSR bit, but don't expose the MSR
to guests yet.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
commit c0d98b35714fb707217c9062b6518e158cd72eea
Author: Andrew Cooper <andrew.cooper3@citrix.com>
Date: Thu Jan 25 15:45:37 2018 +0000
x86/vtx: Introduce a typed union for CR access exit information
This reduces code volume, and has a minor improvement on compiled size,
probably due to the removal of several temporary variables.
add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-50 (-50)
function old new delta
vmx_vmexit_handler 6881 6878 -3
nvmx_n2_vmexit_handler 3473 3426 -47
Take the opportunity to make some style corrections, and add some
ASSERT_UNREACHABLE()s in appropriate places.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
commit 36bc5fc631b08bcf03c6977e79f026a459d76302
Author: Andrew Cooper <andrew.cooper3@citrix.com>
Date: Fri Mar 16 16:57:18 2018 +0000
xen/public: Rename xen_domctl_createdomain.config to arch
This is a tools only hypercall so fine to change. Altering the name avoids
having confusing code such as config->config all over the hypervisor and
toolstack.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
commit 2649612686f968a52ce53d173f5c2a3088ad17dd
Author: Andrew Cooper <andrew.cooper3@citrix.com>
Date: Fri Mar 9 13:03:26 2018 +0000
tools/libxl: Don't prepare or save xc_config when soft resetting a domain
xc_config is only used by xc_domain_create(), but by calling
libxl__arch_domain_{prepare,save}_config() we clobber the real settings with
the default settings.
Move all data and calls relating to xc_domain_create() into the path which
calls it.
As far as I can tell, soft_reset has always been broken for ARM domains using
LIBXL_GIC_VERSION_DEFAULT, which elicits a hard error out of
libxl__arch_domain_save_config(), and only works on x86 because this function
is a no-op.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
commit 74fd984ae699727ae98f4fc36450ff76c8fc7ff3
Author: Andrew Cooper <andrew.cooper3@citrix.com>
Date: Fri Mar 9 12:24:13 2018 +0000
tools/libxl: Drop xc_domain_configuration_t from libxl__domain_build_state
The data it stores is initialised and exclusively used within
libxl__domain_make(), with the important details written back elsewhere by
libxl__arch_domain_save_config(). Prepare xc_config on libxl__domain_make()'s
stack, and drop the parameter.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
(qemu changes not included)
[-- Attachment #2: Type: text/plain, Size: 157 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2018-04-06 6:21 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-04-06 6:21 [xen-unstable-smoke test] 121953: regressions - FAIL osstest service owner
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.