* [U-Boot-Users] MPC885ADS eval board -serial console problem
@ 2004-08-16 4:00 Sachin S Mehta
2004-08-16 7:38 ` Wolfgang Denk
0 siblings, 1 reply; 2+ messages in thread
From: Sachin S Mehta @ 2004-08-16 4:00 UTC (permalink / raw)
To: u-boot
Hi ,
we are using MPC885ADS baord for our testing..
With u-boot all the serial console(SMCs , SCCs) are working fine by
changing board configuration.
Is there any posibility to change the serial console by changing environment variable.
thanks & regards,
sachin mehta
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot-Users] MPC885ADS eval board -serial console problem
2004-08-16 4:00 [U-Boot-Users] MPC885ADS eval board -serial console problem Sachin S Mehta
@ 2004-08-16 7:38 ` Wolfgang Denk
0 siblings, 0 replies; 2+ messages in thread
From: Wolfgang Denk @ 2004-08-16 7:38 UTC (permalink / raw)
To: u-boot
Dear Sachin,
in message <s1207eca.019@EMAIL> you wrote:
>
> Is there any posibility to change the serial console by changing environment
> variable.
See doc/README.serial_multi
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
"I've finally learned what `upward compatible' means. It means we get
to keep all our old mistakes." - Dennie van Tassel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-08-16 7:38 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-08-16 4:00 [U-Boot-Users] MPC885ADS eval board -serial console problem Sachin S Mehta
2004-08-16 7:38 ` Wolfgang Denk
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.