Re: Emu10k1x status

[Takashi Iwai <tiwai@suse.de>]

At Mon, 10 May 2004 19:49:19 -0400,
Francisco Moraes wrote:
> 
> Hi everybody,
> 
> Just wanted to share the status of the Emu10k1x driver (Dell SB Live! 
> Value). I've finally got PCM playback working at 48000khz and a 32Kb 
> buffer. I haven't tried too much more than this which is hard because of 
> lack of specs for the card.

great, thanks for your work!

> I am doing some clean up and I hope to have a first pass of the drive 
> submitted soon.

yes, please.  we can review the problem.

> By the way, I've also added support for the joystick port on the card. 
> This could have been done by simply adding the PCI ID into the 
> drivers/char/joystick/emu10k1-gp.c driver in the linux kernel. Any 
> suggestions or preferences of whether this should be changed in the 
> kernel driver or in the alsa driver itself like I have at the moment?

no, it's an independent driver.  please submit the patch to the
author of the emu10k1-gp driver (Vojtech).


Takashi


-------------------------------------------------------
This SF.Net email is sponsored by Sleepycat Software
Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver
higher performing products faster, at low TCO.
http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3