SIS7012 SPDIF support

SIS7012 SPDIF support

[James Courtier-Dutton]

Is the SPDIF output of the SIS7012 (i810 with ac97)  supported in alsa.
If so, how does one enable the SPDIF out.
The current kernel OSS module supports it.

Cheers
James



-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5

Re: SIS7012 SPDIF support

[Jaroslav Kysela]

On Mon, 2 Jun 2003, James Courtier-Dutton wrote:

> Is the SPDIF output of the SIS7012 (i810 with ac97)  supported in alsa.
> If so, how does one enable the SPDIF out.
> The current kernel OSS module supports it.

Look for IEC958 controls.

						Jaroslav

-----
Jaroslav Kysela <perex@suse.cz>
Linux Kernel Sound Maintainer
ALSA Project, SuSE Labs



-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5

Re: SIS7012 SPDIF support

[Takashi Iwai]

At Mon, 02 Jun 2003 17:01:42 +0100,
James Courtier-Dutton wrote:
> 
> Is the SPDIF output of the SIS7012 (i810 with ac97)  supported in alsa.
> If so, how does one enable the SPDIF out.
> The current kernel OSS module supports it.

which OSS (kernel) version supports spdif out on this chip?
i'd like to take a look.


ciao,

Takashi


-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5

Re: SIS7012 SPDIF support

[James Courtier-Dutton]

[-- Attachment #1: Type: text/plain, Size: 614 bytes --]

Takashi Iwai wrote:
> At Mon, 02 Jun 2003 17:01:42 +0100,
> James Courtier-Dutton wrote:
> 
>>Is the SPDIF output of the SIS7012 (i810 with ac97)  supported in alsa.
>>If so, how does one enable the SPDIF out.
>>The current kernel OSS module supports it.
> 
> 
> which OSS (kernel) version supports spdif out on this chip?
> i'd like to take a look.
> 
> 
> ciao,
> 
> Takashi
> 
> 
The user I was talking to on irc had kernel 2.4.21-ac-rc1  or something 
like that.
I have root access to his box if you need any more info.
linux-2.4.21-rc1.tar.bz2

I attach the source files that I think you need.
Cheers
James



[-- Attachment #2: sis7012.tar.bz2 --]
[-- Type: application/octet-stream, Size: 36608 bytes --]

Re: SIS7012 SPDIF support

[Takashi Iwai]

[-- Attachment #1: Type: text/plain, Size: 1195 bytes --]

At Tue, 03 Jun 2003 12:24:03 +0100,
James Courtier-Dutton wrote:
> 
> Takashi Iwai wrote:
> > At Mon, 02 Jun 2003 17:01:42 +0100,
> > James Courtier-Dutton wrote:
> > 
> >>Is the SPDIF output of the SIS7012 (i810 with ac97)  supported in alsa.
> >>If so, how does one enable the SPDIF out.
> >>The current kernel OSS module supports it.
> > 
> > 
> > which OSS (kernel) version supports spdif out on this chip?
> > i'd like to take a look.
> > 
> > 
> > ciao,
> > 
> > Takashi
> > 
> > 
> The user I was talking to on irc had kernel 2.4.21-ac-rc1  or something 
> like that.
> I have root access to his box if you need any more info.
> linux-2.4.21-rc1.tar.bz2
> 
> I attach the source files that I think you need.

thanks.   looking at the codes, it seems that no special handling for
the chip.  it simply sets up the ac97 registers.

the patch below is a quick hack to set the spdif rate on the first
playback pcm device.  in addition, you'll need to set up the following
mixer controls:

- 'IEC958 AC97-SPSA' to 0 (slots 3/4).
- 'IEC958 Playback Switch' to on.

you might need to set up 'IEC958 Playback Default', too, but it might
not...  try once the above two switches at first.


Takashi

[-- Attachment #2: sis-spdif.dif --]
[-- Type: application/octet-stream, Size: 735 bytes --]

Index: alsa-kernel/pci/intel8x0.c
===================================================================
RCS file: /suse/tiwai/cvs/alsa/alsa-kernel/pci/intel8x0.c,v
retrieving revision 1.82
diff -u -r1.82 intel8x0.c
--- alsa-kernel/pci/intel8x0.c	20 May 2003 12:51:07 -0000	1.82
+++ alsa-kernel/pci/intel8x0.c	3 Jun 2003 12:01:59 -0000
@@ -869,6 +869,9 @@
 		for (i = 0; i < 3; i++)
 			if (ichdev->ac97_rate_regs[i])
 				snd_ac97_set_rate(ichdev->ac97, ichdev->ac97_rate_regs[i], runtime->rate);
+		/* FIXME: hack to enable spdif support */
+		if (ichdev->ichd == ICHD_PCMOUT && chip->device_type == DEVICE_SIS)
+			snd_ac97_set_rate(ichdev->ac97, AC97_SPDIF, runtime->rate);
 	}
 	snd_intel8x0_setup_periods(chip, ichdev);
 	return 0;

Re: SIS7012 SPDIF support

[James Courtier-Dutton]

[-- Attachment #1: Type: text/plain, Size: 1362 bytes --]

Takashi Iwai wrote:
> 
> 
> thanks.   looking at the codes, it seems that no special handling for
> the chip.  it simply sets up the ac97 registers.
> 
> the patch below is a quick hack to set the spdif rate on the first
> playback pcm device.  in addition, you'll need to set up the following
> mixer controls:
> 
> - 'IEC958 AC97-SPSA' to 0 (slots 3/4).
> - 'IEC958 Playback Switch' to on.
> 
> you might need to set up 'IEC958 Playback Default', too, but it might
> not...  try once the above two switches at first.
> 
> 
> Takashi

I have done some further investigation, and have discovered the type of 
ac97 chip used.
I attach output from the ac97#0regs /proc/asound/card0 file.
Here is the url to download datasheets of the chip.
It is an ALC650 Chip.
http://www.realtek.com.tw/downloads/downloads1-3.aspx?lineid=5&famid=All&series=8&refdesign=True

 From my analysis, I think that we should be setting bit 2 of register 
0x2a to get SPDIF out.
Is it possible to set this via alsamixer, or do I now have to open the 
device with a particular name, e.g. 
iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2

The chip can set non-audio bits etc, so we should really be able to 
support opening with the iec958:...etc. name.

If you think I am on the right lines here, then what functions do we 
have to add to get it to parse iec958 lines correctly.

Cheers
James

[-- Attachment #2: ac97-regs --]
[-- Type: text/plain, Size: 768 bytes --]

0:00 = 5980
0:02 = 9f1f
0:04 = 0000
0:06 = 801f
0:08 = 0000
0:0a = 801e
0:0c = 801f
0:0e = 801f
0:10 = 9f1f
0:12 = 9f1f
0:14 = 9f1f
0:16 = 9f1f
0:18 = 9f1f
0:1a = 0000
0:1c = 0000
0:1e = 0000
0:20 = 0000
0:22 = 0000
0:24 = 0000
0:26 = 000f
0:28 = 05c7
0:2a = 05c1
0:2c = bb80
0:2e = bb80
0:30 = bb80
0:32 = bb80
0:34 = 0000
0:36 = 9f80
0:38 = 9f9f
0:3a = 2000
0:3c = 0000
0:3e = 0000
0:40 = 0000
0:42 = 0000
0:44 = 0000
0:46 = 0000
0:48 = 0000
0:4a = 0000
0:4c = 0000
0:4e = 0000
0:50 = 0000
0:52 = 0000
0:54 = 0000
0:56 = 0000
0:58 = 0000
0:5a = 0000
0:5c = 0000
0:5e = 0000
0:60 = 0000
0:62 = 0000
0:64 = 0808
0:66 = 0808
0:68 = 0000
0:6a = 0000
0:6c = 0000
0:6e = 0014
0:70 = 0211
0:72 = 00a0
0:74 = 0043
0:76 = 0001
0:78 = 0102
0:7a = 57c6
0:7c = 414c
0:7e = 4720

Re: SIS7012 SPDIF support

[Takashi Iwai]

[-- Attachment #1: Type: text/plain, Size: 1072 bytes --]

At Fri, 06 Jun 2003 02:20:05 +0100,
James Courtier-Dutton wrote:
> 
> Takashi Iwai wrote:
> > 
> > 
> > thanks.   looking at the codes, it seems that no special handling for
> > the chip.  it simply sets up the ac97 registers.
> > 
> > the patch below is a quick hack to set the spdif rate on the first
> > playback pcm device.  in addition, you'll need to set up the following
> > mixer controls:
> > 
> > - 'IEC958 AC97-SPSA' to 0 (slots 3/4).
> > - 'IEC958 Playback Switch' to on.
> > 
> > you might need to set up 'IEC958 Playback Default', too, but it might
> > not...  try once the above two switches at first.
> > 
> > 
> > Takashi
> 
> I have done some further investigation, and have discovered the type of 
> ac97 chip used.
> I attach output from the ac97#0regs /proc/asound/card0 file.
> Here is the url to download datasheets of the chip.
> It is an ALC650 Chip.
> http://www.realtek.com.tw/downloads/downloads1-3.aspx?lineid=5&famid=All&series=8&refdesign=True

oops, it seems like my mistake in the last change.

could you try the attached patch?


Takashi

[-- Attachment #2: alc650-fix.dif --]
[-- Type: application/octet-stream, Size: 1108 bytes --]

Index: alsa-kernel/pci/ac97/ac97_patch.c
===================================================================
RCS file: /suse/tiwai/cvs/alsa/alsa-kernel/pci/ac97/ac97_patch.c,v
retrieving revision 1.14
diff -u -r1.14 ac97_patch.c
--- alsa-kernel/pci/ac97/ac97_patch.c	21 May 2003 09:50:13 -0000	1.14
+++ alsa-kernel/pci/ac97/ac97_patch.c	6 Jun 2003 08:43:09 -0000
@@ -370,18 +370,17 @@
 	unsigned short val;
 	int spdif = 0;
 
-	/* FIXME: set the above 1 if we can detect the chip rev.E correctly.
+	/* FIXME: set the below 1 if we can detect the chip rev.E correctly.
 	 *        this is used for switching mic and center/lfe, which needs
 	 *        resetting GPIO0 level on the older revision.
 	 */
 	ac97->spec.dev_flags = 0;
 
-	/* check spdif */
-	if (ac97->spec.dev_flags) {
-		val = snd_ac97_read(ac97, AC97_EXTENDED_STATUS);
-		if (val & AC97_EA_SPCV)
-			spdif = 1;
-	}
+	/* check spdif (should be only on rev.E) */
+	val = snd_ac97_read(ac97, AC97_EXTENDED_STATUS);
+	if (val & AC97_EA_SPCV)
+		spdif = 1;
+
 	if (spdif) {
 		/* enable spdif in */
 		snd_ac97_write_cache(ac97, AC97_ALC650_CLOCK,

Re: SIS7012 SPDIF support

[James Courtier-Dutton]

Takashi Iwai wrote:
> 
> 
> oops, it seems like my mistake in the last change.
> 
> could you try the attached patch?
> 
> 
> Takashi

That seems to have helped. We now get sliders.
We now get ac3 and dts sound with device name
iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2
and pcm with device name
iec958:AES0=0x4,AES1=0x82,AES2=0x0,AES3=0x2

We currently get no sound with device name: -
default
front

We only have the spdif connected.
So if sound is comming out of the analogue port, we will not know about it.

It would be nice to get sound output with default and front, because 
then oss emulation and alsa's automatic resampling would also work.

The problem with the device is that if you want a 48000hz spdif out, all 
inputs have to also be 48000hz. So, if we open the device for 44100 hz 
output, it would be nice if the spdif automatically changed to 44100 hz 
as well.
Currently, sound only seems to work if you send it to the device at 
48000 hz. E.g. DVDs audio tracks.

Cheers
James



-------------------------------------------------------
This SF.net email is sponsored by:  Etnus, makers of TotalView, The best
thread debugger on the planet. Designed with thread debugging features
you've never dreamed of, try TotalView 6 free at www.etnus.com.

build changes

[Giuliano Pochini]

In v0.9.4 Rules.make changed. I used to put the files of my driver
in the alsa-driver-xxx/pci directory, but they don't compile anymore:

bash-2.05$ make
Coping file alsa-kernel/core/pci/echoaudio.c
cp: cannot stat `/home/pochini/soft/alsa-driver-0.9.4/alsa-kernel/pci/echoaudio.c': No such file or directory
make: *** [echoaudio.c] Error 1
bash-2.05$

I tried to replace Rules.make with an older version and it works
fine. How do I compile the driver for 0.9.4+ ?  I also would like
to group all files in a subdir.


Bye.



-------------------------------------------------------
This SF.net email is sponsored by:  Etnus, makers of TotalView, The best
thread debugger on the planet. Designed with thread debugging features
you've never dreamed of, try TotalView 6 free at www.etnus.com.

Re: build changes

[Jaroslav Kysela]

On Wed, 4 Jun 2003, Giuliano Pochini wrote:

> 
> In v0.9.4 Rules.make changed. I used to put the files of my driver
> in the alsa-driver-xxx/pci directory, but they don't compile anymore:
> 
> bash-2.05$ make
> Coping file alsa-kernel/core/pci/echoaudio.c
> cp: cannot stat `/home/pochini/soft/alsa-driver-0.9.4/alsa-kernel/pci/echoaudio.c': No such file or directory
> make: *** [echoaudio.c] Error 1
> bash-2.05$
> 
> I tried to replace Rules.make with an older version and it works
> fine. How do I compile the driver for 0.9.4+ ?  I also would like
> to group all files in a subdir.

Do you have a file alsa-driver/pci/echoaudio.patch?

						Jaroslav

-----
Jaroslav Kysela <perex@suse.cz>
Linux Kernel Sound Maintainer
ALSA Project, SuSE Labs



-------------------------------------------------------
This SF.net email is sponsored by:  Etnus, makers of TotalView, The best
thread debugger on the planet. Designed with thread debugging features
you've never dreamed of, try TotalView 6 free at www.etnus.com.

Re: build changes

[Giuliano Pochini]

On 04-Jun-2003 Jaroslav Kysela wrote:
>> I tried to replace Rules.make with an older version and it works
>> fine. How do I compile the driver for 0.9.4+ ?  I also would like
>> to group all files in a subdir.
>
> Do you have a file alsa-driver/pci/echoaudio.patch?

Yes... I removed it and now it compiles the main source, but it stops here:

make: *** No rule to make target `echoaudiogeneric/CDaffyDuck.c', needed by `echoaudiogeneric/CDaffyDuck.o'.  Stop.

The Makefile contains this line:

snd-echoaudio-objs := echoaudio.o echoaudiogeneric/OsSupportLinux.o [...]

all .cpp sources in echoaudiogeneric/ have already been compiled. It shouldn't try
to compile them again since object files are up to date.


Bye.



-------------------------------------------------------
This SF.net email is sponsored by:  Etnus, makers of TotalView, The best
thread debugger on the planet. Designed with thread debugging features
you've never dreamed of, try TotalView 6 free at www.etnus.com.

Re: build changes

[Takashi Iwai]

At Wed, 04 Jun 2003 17:57:32 +0200 (CEST),
Giuliano Pochini wrote:
> 
> 
> On 04-Jun-2003 Jaroslav Kysela wrote:
> >> I tried to replace Rules.make with an older version and it works
> >> fine. How do I compile the driver for 0.9.4+ ?  I also would like
> >> to group all files in a subdir.
> >
> > Do you have a file alsa-driver/pci/echoaudio.patch?
> 
> Yes... I removed it and now it compiles the main source, but it stops here:
> 
> make: *** No rule to make target `echoaudiogeneric/CDaffyDuck.c', needed by `echoaudiogeneric/CDaffyDuck.o'.  Stop.
> 
> The Makefile contains this line:
> 
> snd-echoaudio-objs := echoaudio.o echoaudiogeneric/OsSupportLinux.o [...]
> 
> all .cpp sources in echoaudiogeneric/ have already been compiled. It shouldn't try
> to compile them again since object files are up to date.

wouldn't it better to put another Makefile in sub directories?


Takashi


-------------------------------------------------------
This SF.net email is sponsored by:  Etnus, makers of TotalView, The best
thread debugger on the planet. Designed with thread debugging features
you've never dreamed of, try TotalView 6 free at www.etnus.com.

Re: build changes

[Giuliano Pochini]

On mer, 2003-06-04 at 17:17, Takashi Iwai wrote:
> At Wed, 04 Jun 2003 17:57:32 +0200 (CEST),
>
> wouldn't it better to put another Makefile in sub directories?

Sure. I followed the instrutions you wrote here a couple of months ago.
When I do cvscompile --with-cards=powermac,echoaudio[...] it stops here:

make  -C echoaudio fastdep
make[2]: Entering directory
`/home/Giu/tttttt/alsa-driver-0.9.4/pci/echoaudio'
/home/Giu/tttttt/alsa-driver-0.9.4/include/sndversions.h was not updated
make[2]: *** No rule to make target `GenericDriver/OsSupportLinux.c',
needed by `fastdep'.  Stop.
make[2]: Leaving directory
`/home/Giu/tttttt/alsa-driver-0.9.4/pci/echoaudio'
make[1]: *** [_sfdep_echoaudio] Error 2
make[1]: Leaving directory `/home/Giu/tttttt/alsa-driver-0.9.4/pci'
make: *** [dep] Error 1


But any subsequent "make" completes successfully.

These are the changes I did to the various files:


pci/Makefile

-extra-subdir-y	:= pdplus
+extra-subdir-y	:= pdplus echoaudio


utils/Modules.dep
 
+%dir linux/sound/pci/echoaudio
+|snd-echoaudio snd-pcm


acore/Makefile

+obj-$(CONFIG_SND_ECHOAUDIO) += snd-pcm.o snd-page-alloc.o snd.o
snd-rawmidi.o
 


Bye.




-------------------------------------------------------
This SF.net email is sponsored by:  Etnus, makers of TotalView, The best
thread debugger on the planet. Designed with thread debugging features
you've never dreamed of, try TotalView 6 free at www.etnus.com.