Re: How to put 16bit none audio PCM data stream into a 32bit none audio S/P-DIF transport stream?

[Takashi Iwai <tiwai@suse.de>]

At Wed, 9 Apr 2003 10:28:15 +0200,
Gregoire Favre wrote:
> 
> On Wed, Apr 09, 2003 at 08:59:22AM +0200, Benny Sjostrand wrote:
> 
> > All tests I've done with xine it always output the AC3 data on 48khz, 
> > which should work fine.
> 
> Well, maybe with your receiver you are lucky... we have seen those days
> in this ml quiete a few people for which it doesn't work with there
> receivers.

i can hear ac3 5.1 output over spdif with a terratec xfire 1024
without problems.  i guess it's not the choice of receiver but the
card itself.  there are differences between the cards even with the
same cs46xx chip depending on the hardware implementation.

> And as for me it works under windows, I think there is a problem in the
> software.

yes it should be a driver bug.
but note that without the real (problematic) hardware, it's difficult
to check (especially if the system of developers do really work :) ...


Takashi


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf