Firewire 410

Firewire 410

[Simon Schampijer]

Hello,
I've got a Maudio Firewire 410.
Are you going to make also drivers
for this one ? Or are there Problems with
Maudio or firewire???

Thanks for every reply

Simon




-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click

Re: Firewire 410

[Takashi Iwai]

At 05 Mar 2004 11:23:35 +0100,
Simon Schampijer wrote:
> 
> Hello,
> I've got a Maudio Firewire 410.
> Are you going to make also drivers
> for this one ?

so far, no ALSA developer works on it.

>  Or are there Problems with
> Maudio or firewire???

unfortunately, no hardware, no datasheet, no time...


Takashi


-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click

Re: Firewire 410

[Paul Davis]

>At 05 Mar 2004 11:23:35 +0100,
>Simon Schampijer wrote:
>> 
>> Hello,
>> I've got a Maudio Firewire 410.
>> Are you going to make also drivers
>> for this one ?
>
>so far, no ALSA developer works on it.
>
>>  Or are there Problems with
>> Maudio or firewire???
>
>unfortunately, no hardware, no datasheet, no time...

when i talked with m-audio at NAMM, they claim that their firewire
interface(s) will be "class compliant". on os-x, for example, there is
no m-audio firewire driver, just one for the relevant standard for
audio/midi over 1394. FWIW, Event/Echo and Apogee both said the same
thing.

whether this is strictly true is another matter, as is the question of
how to get that standard in its full form.

--p


-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click

Re: Firewire 410

[Simon Schampijer]

Le mar 09/03/2004 à 19:32, Paul Davis a écrit :
> >At 05 Mar 2004 11:23:35 +0100,
> >Simon Schampijer wrote:
> >> 
> >> Hello,
> >> I've got a Maudio Firewire 410.
> >> Are you going to make also drivers
> >> for this one ?
> >
> >so far, no ALSA developer works on it.
> >
> >>  Or are there Problems with
> >> Maudio or firewire???
> >
> >unfortunately, no hardware, no datasheet, no time...
> 
> when i talked with m-audio at NAMM, they claim that their firewire
> interface(s) will be "class compliant". on os-x, for example, there is
> no m-audio firewire driver, just one for the relevant standard for
> audio/midi over 1394. FWIW, Event/Echo and Apogee both said the same
> thing.
> 
Hi,
I have tried to use the m-audio with the iec61883 jack driver.
After doing some test, I have found that I can have some noise only
after an hot reboot of my powerbook (Mac OS X to Yellowdog Linux) with
the card plugged.

The strange thing is with hot reboot the card does not appear in
/proc/bus/firewire (I haven't the laptop here to check).
With a cold boot or an unplug/plug the card appears in
/proc/bus/firewire but I haven't succesfully made any noise with this
card.

So perhaps there is a firmware uploading in Mac OS X like the RME
Multiface.

Tell me if you need more informations.

Thanks a lot for your help,

best regards,
Simon.




-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id\x1470&alloc_id638&op=click

Re: Firewire 410

[Steve Harris]

On Tue, Mar 09, 2004 at 07:44:59 +0100, Simon Schampijer wrote:
> I have tried to use the m-audio with the iec61883 jack driver.
> After doing some test, I have found that I can have some noise only
> after an hot reboot of my powerbook (Mac OS X to Yellowdog Linux) with
> the card plugged.

After talking with Bob, I think that he didnt even expect the iec61883 to
be compatible with any hardware. It is in very early stages of
development, and he has no hardware to test against. The initial aim was
to get jack to jack communications working using something similar.

- Steve 


-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click