problems compiling current CVS

problems compiling current CVS

[Paul Davis]

this is with CVS as of this morning (US EST), trying to build alsa-driver
outside a 2.4.20 kernel using:

        ./cvscompile --with-oss=yes --with-sequencer=yes --with-cards=rme9652,hd
sp,trident

  [ ... ]

ake[2]: Entering directory `/usr/local/music/src/alsa-cvs/newer/alsa-driver/acor
e/ioctl32'
make[2]: Leaving directory `/usr/local/music/src/alsa-cvs/newer/alsa-driver/acor
e/ioctl32'
make  -C oss fastdep
make[2]: Entering directory `/usr/local/music/src/alsa-cvs/newer/alsa-driver/aco
re/oss'
/bin/sh: ${xtmp:0:5}: bad substitution
make[2]: *** [mixer_oss.c] Error 1
make[2]: Leaving directory `/usr/local/music/src/alsa-cvs/newer/alsa-driver/acor
e/oss'
make[1]: *** [_sfdep_oss] Error 2
make[1]: Leaving directory `/usr/local/music/src/alsa-cvs/newer/alsa-driver/acor
e'
make: *** [dep] Error 1



-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5

Re: problems compiling current CVS

[Paul Davis]

>This bit:  
>
>        ${xtmp:0:5}
>
>is a Bash-ism.  Normal Bourne shells don't understand this.  I'm guessing
>that your system's /bin/sh isn't Bash.  You might be able to put a 
>
>        SHELL=/bin/bash

paul[2846]>which sh
/bin/sh
paul[2847]>ls -l /bin/sh
lrwxrwxrwx   1 root     root            4 Aug 16  2000 /bin/sh -> bash
paul[2852]>bash -version
GNU bash, version 1.14.7(1)




-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5

Re: problems compiling current CVS

[Matthew Clarke]

Hmph.  My SMTP server is not an open relay or a spam source, even if it
is in an ADSL dynamic IP address pool, thank you very much.  <bleep>ing
spammers.

Let's try sending this to alsa-devel again ...

I wrote:

> lundi, le 2 juin, 2003, Paul Davis nous a dit ceci:
> 
> > this is with CVS as of this morning (US EST), trying to build alsa-driver
> > outside a 2.4.20 kernel using:
> > 
> >         ./cvscompile --with-oss=yes --with-sequencer=yes --with-cards=rme9652,hd
> > sp,trident
> > 
> >   [ ... ]
> > 
> > ake[2]: Entering directory `/usr/local/music/src/alsa-cvs/newer/alsa-driver/acor
> > e/ioctl32'
> > make[2]: Leaving directory `/usr/local/music/src/alsa-cvs/newer/alsa-driver/acor
> > e/ioctl32'
> > make  -C oss fastdep
> > make[2]: Entering directory `/usr/local/music/src/alsa-cvs/newer/alsa-driver/aco
> > re/oss'
> > /bin/sh: ${xtmp:0:5}: bad substitution
> 
> Hmph.  This syntax is in configure now too.
> 
> This bit:  
> 
>         ${xtmp:0:5}
> 
> is a Bash-ism.  Normal Bourne shells don't understand this.  I'm guessing
> that your system's /bin/sh isn't Bash.  You might be able to put a 
> 
>         SHELL=/bin/bash
> 
> line into alsa-driver/acore/oss/Makefile right before the include of
> $(TOPDIR)/Rules.make.  (I say "might" because I can't build ALSA right now
> due to a (real) kernel compiler / system compiler mismatch.)
> 
> Alternatively, if you have root, you could temporarily replace /bin/sh
> with a symlink to /bin/bash, build, then restore /bin/sh.
> 
> Matt.
> -- 
> For a successful technology, reality must take precedence over public
> relations, for nature cannot be fooled.
> 				-- Richard P. Feynman


-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5

Re: problems compiling current CVS

[Matthew Clarke]

lundi, le 2 juin, 2003, Paul Davis nous a dit ceci:

> >This bit:  
> >
> >        ${xtmp:0:5}
> >
> >is a Bash-ism.  Normal Bourne shells don't understand this.  I'm guessing
> >that your system's /bin/sh isn't Bash.  You might be able to put a 
> >
> >        SHELL=/bin/bash
> 
> paul[2846]>which sh
> /bin/sh
> paul[2847]>ls -l /bin/sh
> lrwxrwxrwx   1 root     root            4 Aug 16  2000 /bin/sh -> bash
> paul[2852]>bash -version
> GNU bash, version 1.14.7(1)

Looks like I guessed wrong.  The only system I still have access to with
Bash 1.x on it isn't accessible right now, and the newer ones I do have
access to don't say when the ${foo:0:5} syntax was added.

Dunno why it's not working.  You might try bash2, viz.:

------------------------------------------------------------------------------
21:34 [clamat@ds0:~] 168 > /bin/bash -version
GNU bash, version 2.04.0(1)-release (i586-pc-linux-gnu)
Copyright 1999 Free Software Foundation, Inc.
21:35 [clamat@ds0:~] 169 > /bin/bash
bash-2.04$ x=testvalue
bash-2.04$ echo ${x:0:5}
testv
bash-2.04$ exit
21:35 [clamat@ds0:~] 170 > 
------------------------------------------------------------------------------

Matt.
-- 
For a successful technology, reality must take precedence over public
relations, for nature cannot be fooled.
				-- Richard P. Feynman


-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5

Re: problems compiling current CVS

[Takashi Iwai]

[-- Attachment #1: Type: text/plain, Size: 762 bytes --]

At Mon, 02 Jun 2003 23:54:09 -0400,
Paul Davis wrote:
> 
> >This bit:  
> >
> >        ${xtmp:0:5}
> >
> >is a Bash-ism.  Normal Bourne shells don't understand this.  I'm guessing
> >that your system's /bin/sh isn't Bash.  You might be able to put a 
> >
> >        SHELL=/bin/bash
> 
> paul[2846]>which sh
> /bin/sh
> paul[2847]>ls -l /bin/sh
> lrwxrwxrwx   1 root     root            4 Aug 16  2000 /bin/sh -> bash
> paul[2852]>bash -version
> GNU bash, version 1.14.7(1)

i'm not sure, too, whether bash1 doesn't support the format above.
anyway, please try the patch attached below.  it replaces the function
with sed & co.

(unfortunately, we cannot use $(subst acore,core,$(MODCURDIR)) because
 the word "acore" might match inside the pathname.)


Takashi

[-- Attachment #2: old-bash-fix.dif --]
[-- Type: application/octet-stream, Size: 2727 bytes --]

Index: alsa-driver/Rules.make
===================================================================
RCS file: /suse/tiwai/cvs/alsa/alsa-driver/Rules.make,v
retrieving revision 1.26
diff -u -r1.26 Rules.make
--- alsa-driver/Rules.make	2 Jun 2003 10:07:19 -0000	1.26
+++ alsa-driver/Rules.make	3 Jun 2003 09:49:55 -0000
@@ -92,17 +92,10 @@
 endif
 
 %.c: %.patch
-	@xtmp="$(MODCURDIR)"; \
-	if [ "$${xtmp:0:5}" = "acore" ]; then \
-		xtmp1=$${xtmp:6} ; \
-		if [ ! -z "$${xtmp1}" ]; then xtmp1="$${xtmp1}/" ; fi ; \
-		echo "coping file alsa-kernel/core/$${xtmp1}$@"; \
-		cp $(TOPDIR)/alsa-kernel/core/$${xtmp1}$@ $@; \
-	else \
-		echo "Coping file alsa-kernel/core/$${xtmp}/$@"; \
-		cp $(TOPDIR)/alsa-kernel/$${xtmp}/$@ $@; \
-	fi
-	@patch -p0 -i $<
+	@xtmp=`echo $(MODCURDIR) | sed -e 's/^acore/core/'`/$@;\
+	echo "copying file alsa-kernel/$$xtmp";\
+	cp "$(TOPDIR)/alsa-kernel/$$xtmp" $@;\
+	patch -p0 -i $<
 
 %.isapnp: %.c
 	$(CPP) -C -D__KERNEL__ $(CFLAGS) $(EXTRA_CFLAGS) -D__isapnp_now__ -DKBUILD_BASENAME=$(subst $(comma),_,$(subst -,_,$(*F))) $(CFLAGS_$@) $(CFLAGS_$@) $< | $(TOPDIR)/utils/convert_isapnp_ids > $@
Index: alsa-driver/configure.in
===================================================================
RCS file: /suse/tiwai/cvs/alsa/alsa-driver/configure.in,v
retrieving revision 1.124
diff -u -r1.124 configure.in
--- alsa-driver/configure.in	2 Jun 2003 10:07:19 -0000	1.124
+++ alsa-driver/configure.in	3 Jun 2003 09:29:43 -0000
@@ -210,22 +210,29 @@
 dnl
 kernel_compiler_type=`echo $kernel_compiler | cut -d ' ' -f 1`
 kernel_compiler_version=`echo $kernel_compiler | cut -d ' ' -f 2`
-if test "${kernel_compiler_version:0:5}" = "egcs-"; then
+case "$kernel_compiler_version" in
+egcs-*)
   kernel_compiler_type="egcs"
-  kernel_compiler_version=`echo ${kernel_compiler_version:5} | cut -d ' ' -f 1`
-fi
-if test "${my_compiler:0:4}" = "gcc-"; then
+  kernel_compiler_version=`echo "$kernel_compiler_version" | cut -b 6-`
+ ;;
+esac
+case "$my_compiler" in
+gcc-*)
   my_compiler_type="gcc"
-  my_compiler_version=`echo ${my_compiler:4} | cut -d ' ' -f 1`
-else
-  if test "${my_compiler:0:5}" = "egcs-"; then
+  my_compiler_version=`echo "$my_compiler" | cut -b 5-`
+  ;;
+*)
+  case "$my_compiler" in
+  egcs-*)
     my_compiler_type="egcs"
-    my_compiler_version=`echo ${my_compiler:5} | cut -d ' ' -f 1`
-  else
+    my_compiler_version=`echo "$my_compiler" | cut -b 6-`
+    ;;
+  *)
     my_compiler_type=`echo $my_compiler | cut -d ' ' -f 1`
-    my_compiler_version=`echo $my_compiler | cut -d ' ' -f 3`
-  fi
-fi
+    my_compiler_version=`echo "$my_compiler" | cut -d ' ' -f 3`
+    ;;
+  esac
+esac
 if test "$my_compiler_type" = "$my_compiler_version"; then
   my_compiler_type="gcc"
 fi

Re: problems compiling current CVS

[Takashi Iwai]

At Tue, 03 Jun 2003 11:54:01 +0200,
私 wrote:
> 
> [1  <text/plain; US-ASCII (7bit)>]
> At Mon, 02 Jun 2003 23:54:09 -0400,
> Paul Davis wrote:
> > 
> > >This bit:  
> > >
> > >        ${xtmp:0:5}
> > >
> > >is a Bash-ism.  Normal Bourne shells don't understand this.  I'm guessing
> > >that your system's /bin/sh isn't Bash.  You might be able to put a 
> > >
> > >        SHELL=/bin/bash
> > 
> > paul[2846]>which sh
> > /bin/sh
> > paul[2847]>ls -l /bin/sh
> > lrwxrwxrwx   1 root     root            4 Aug 16  2000 /bin/sh -> bash
> > paul[2852]>bash -version
> > GNU bash, version 1.14.7(1)
> 
> i'm not sure, too, whether bash1 doesn't support the format above.
> anyway, please try the patch attached below.  it replaces the function
> with sed & co.

btw, the patch was already checked in to cvs.


Takashi


-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5