Re: sblive line capture woes

[Takashi Iwai <tiwai@suse.de>]

At Fri, 18 Oct 2002 21:36:39 +0200 (CEST),
Jaroslav wrote:
> 
> On Fri, 18 Oct 2002, Bob Ham wrote:
> 
> > On Fri, Oct 18, 2002 at 08:31:10PM +0200, Jaroslav Kysela wrote:
> > 
> > > Thanks. I don't see the problem at first glance. Are you trying to capture 
> > > signal from LiveDrive line #1?
> > 
> > No, from 'Line LineDrive',0
> > 
> > > Could you follow these steps?
> > > 
> > > Please, turn everything off (volumes and mute controls).
> > 
> > I ran the attached script, which appears to do the job.  The amixer output
> > is also attached.
> > 
> > > And type 
> > > this command:
> > > 
> > > amixer sset 'Line LiveDrive',0 capture 100 cap
> > 
> > Didn't work :(
> > 
> > > It should be sufficient. If not, it might be that we have some different 
> > > names for EMU10K1 inputs. Then could you try these commands 
> > > (simultaneously, if input works, try determine the right one)?
> > > 
> > > amixer sset 'Line LiveDrive',1 capture 100 cap
> > > amixer sset 'IEC958 TTL',0 capture 100 cap
> > > amixer sset 'Zoom Video',0 capture 100 cap
> > > amixer sset 'IEC958 Optical' capture 100 cap
> > > amixer sset 'IEC958 Coaxial' capture 100 cap
> > > amixer sset 'Line LiveDrive' capture 100 cap
> > 
> > Didn't work either :(
> > 
> > > AC'97 controls should be off. There's none connection between AC'97 
> > > and these inputs. Good luck.
> > 
> > I'll bear that in mind.
> > 
> > By the way, and I've no idea if it has any bearing but my snd-emu10k1
> > options include snd_extin=0x3fc3 snd_extout=0x1fff.
> 
> You may try: snd_extin=0x3fff and try set Zoom Video and IEC958 TTL 
> controls again to verify, if signal is not there.

how about to give a model module parameter (preferably in string),
such like

	options snd-emu10k1 model="5.1"

and set the extin/out masks inside ?


Takashi


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf