* /alsa-tools-0.9.6/us428controls 0.1
@ 2003-09-06 14:51 Karsten Wiese
2003-09-08 11:19 ` Takashi Iwai
0 siblings, 1 reply; 4+ messages in thread
From: Karsten Wiese @ 2003-09-06 14:51 UTC (permalink / raw)
To: Takashi Iwai, Martin Langer; +Cc: alsa-devel, 'us428@drehmoment.org'
[-- Attachment #1: Type: text/plain, Size: 469 bytes --]
Hi,
intended to be started from hotplug script,
us428controls so far enables the sliders 1..4 for setting directmonitoring
levels. It also takes care of the red Mastervolume slider.
this app can be expanded to fully enable all of the sliders+knobs.
in userspace it is easier to recover from errors....
for hotplug-starting this, copy tascam-fpga to your /etc/hotplug/usb after
setiing up from usb-midi-fw.sf.net for more necessary infrastructur.
regards,
Karsten
[-- Attachment #2: us428control.tar.bz2 --]
[-- Type: application/x-tbz, Size: 20742 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: /alsa-tools-0.9.6/us428controls 0.1
2003-09-06 14:51 /alsa-tools-0.9.6/us428controls 0.1 Karsten Wiese
@ 2003-09-08 11:19 ` Takashi Iwai
2003-09-08 12:09 ` Karsten Wiese
0 siblings, 1 reply; 4+ messages in thread
From: Takashi Iwai @ 2003-09-08 11:19 UTC (permalink / raw)
To: Karsten Wiese; +Cc: Martin Langer, alsa-devel, 'us428@drehmoment.org'
At Sat, 6 Sep 2003 16:51:46 +0200,
Karsten Wiese wrote:
>
> [1 <text/plain; us-ascii (7bit)>]
> Hi,
>
> intended to be started from hotplug script,
> us428controls so far enables the sliders 1..4 for setting directmonitoring
> levels. It also takes care of the red Mastervolume slider.
> this app can be expanded to fully enable all of the sliders+knobs.
> in userspace it is easier to recover from errors....
do you think this version to be put on alsa-tools package, too?
then i'll review the code...
Takashi
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: /alsa-tools-0.9.6/us428controls 0.1
2003-09-08 11:19 ` Takashi Iwai
@ 2003-09-08 12:09 ` Karsten Wiese
2003-09-08 12:58 ` Takashi Iwai
0 siblings, 1 reply; 4+ messages in thread
From: Karsten Wiese @ 2003-09-08 12:09 UTC (permalink / raw)
To: Takashi Iwai; +Cc: Martin Langer, alsa-devel, 'us428@drehmoment.org'
Am Montag 08 September 2003 13:19 schrieb Takashi Iwai:
> At Sat, 6 Sep 2003 16:51:46 +0200,
>
> Karsten Wiese wrote:
> > [1 <text/plain; us-ascii (7bit)>]
> > Hi,
> >
> > intended to be started from hotplug script,
> > us428controls so far enables the sliders 1..4 for setting
> > directmonitoring levels. It also takes care of the red Mastervolume
> > slider.
> > this app can be expanded to fully enable all of the sliders+knobs.
> > in userspace it is easier to recover from errors....
>
> do you think this version to be put on alsa-tools package, too?
> then i'll review the code...
>
no need to put this version on alsa-tools package.
Here is already a more capable one.
I'll send it, when I tested it with the CVS-built module.
Or on request, if someone likes to test-drive :-)
regards,
Karsten
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: /alsa-tools-0.9.6/us428controls 0.1
2003-09-08 12:09 ` Karsten Wiese
@ 2003-09-08 12:58 ` Takashi Iwai
0 siblings, 0 replies; 4+ messages in thread
From: Takashi Iwai @ 2003-09-08 12:58 UTC (permalink / raw)
To: Karsten Wiese; +Cc: Martin Langer, alsa-devel, 'us428@drehmoment.org'
At Mon, 8 Sep 2003 14:09:47 +0200,
Karsten Wiese wrote:
>
> Am Montag 08 September 2003 13:19 schrieb Takashi Iwai:
> > At Sat, 6 Sep 2003 16:51:46 +0200,
> >
> > Karsten Wiese wrote:
> > > [1 <text/plain; us-ascii (7bit)>]
> > > Hi,
> > >
> > > intended to be started from hotplug script,
> > > us428controls so far enables the sliders 1..4 for setting
> > > directmonitoring levels. It also takes care of the red Mastervolume
> > > slider.
> > > this app can be expanded to fully enable all of the sliders+knobs.
> > > in userspace it is easier to recover from errors....
> >
> > do you think this version to be put on alsa-tools package, too?
> > then i'll review the code...
> >
> no need to put this version on alsa-tools package.
> Here is already a more capable one.
> I'll send it, when I tested it with the CVS-built module.
> Or on request, if someone likes to test-drive :-)
ok. thanks.
Takashi
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2003-09-08 12:58 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-09-06 14:51 /alsa-tools-0.9.6/us428controls 0.1 Karsten Wiese
2003-09-08 11:19 ` Takashi Iwai
2003-09-08 12:09 ` Karsten Wiese
2003-09-08 12:58 ` Takashi Iwai
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.