All of lore.kernel.org
 help / color / mirror / Atom feed
* updating 0.9.0beta3 drivers to work with cs4205
@ 2002-06-19 11:29 etienne
  2002-06-21 13:44 ` Takashi Iwai
  0 siblings, 1 reply; 2+ messages in thread
From: etienne @ 2002-06-19 11:29 UTC (permalink / raw)
  To: alsa-devel

Hello,

I'm trying to get jmax running on a Dell Inspiron 8200 (P4)........ 
which has a  CS 4205 chip on it.

jmax only runs with alsa 0.9.0beta3........

The card-intel8x0.c code for 0.9.0beta3 only supports Intel,82801AA, 
Intel,82901AB, Intel,82801BA and Intel,MX440.
Later versions of 0.9.0 also support (amongst others) ICH3 and ICH4

..... my card is ICH3 ... so I did some copy and paste of code from 
newer 0.9.0 into the beta3 version of card-intel8x0.c

I compiled and installed, and finally, my card is recognised and loaded 
........ /var/log/messages outputs:
Jun 18 21:31:12 xenakis kernel: PCI: Found IRQ 11 for device 00:1f.5
Jun 18 21:31:12 xenakis kernel: PCI: Sharing IRQ 11 with 00:1f.6
Jun 18 21:31:12 xenakis kernel: PCI: Setting latency timer of device 
00:1f.5 to 64

HOWEVER! ... when I try to run aplay I get:
ALSA lib pcm_hw.c:579:(snd_pcm_hw_open_subdevice) 
SNDRV_PCM_IOCTL_PVERSION failed: Invalid argument
aplay: main:442: audio open error: Invalid argument

So there are other things in other places that I also need to fix 
.................. does anyone know if this is going to be a tin of 
worms ? Am I in for a rediculous amount of changes ? .......... should I 
just buy a cheap PCMCIA card that is supported in alsa 0.9.0beta3, or am 
I close to getting it working ? (I've never played in driver code before 
so I'm worried I wont find a way out)

etienne



----------------------------------------------------------------------------
                   Bringing you mounds of caffeinated joy
                   >>>     http://thinkgeek.com/sf    <<<

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: updating 0.9.0beta3 drivers to work with cs4205
  2002-06-19 11:29 updating 0.9.0beta3 drivers to work with cs4205 etienne
@ 2002-06-21 13:44 ` Takashi Iwai
  0 siblings, 0 replies; 2+ messages in thread
From: Takashi Iwai @ 2002-06-21 13:44 UTC (permalink / raw)
  To: eyem; +Cc: alsa-devel

At Thu, 20 Jun 2002 21:31:55 +1000,
etienne wrote:
> 
> Hello,
> 
> I'm trying to get jmax running on a Dell Inspiron 8200 (P4)........ 
> which has a  CS 4205 chip on it.
> 
> jmax only runs with alsa 0.9.0beta3........
 
doesn't it work with 0.9.0rc1/2?
if not, jmax should be corrected.


Takashi


-------------------------------------------------------
Sponsored by:
ThinkGeek at http://www.ThinkGeek.com/

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2002-06-21 13:44 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-06-19 11:29 updating 0.9.0beta3 drivers to work with cs4205 etienne
2002-06-21 13:44 ` Takashi Iwai

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.