Re: S/PDIF on AD1980 patch

[Takashi Iwai <tiwai@suse.de>]

At Thu, 13 Feb 2003 03:19:02 -0800,
Jaroslaw Sobierski wrote:
> 
> 
> Hi all,
> 
> I recently installed an Asus P4PE with built in AD1980 audio codec
> (accessible through the ICH4 south bridge). The latest ALSA drivers
> detected the chip and AC97 audio correctly even setting up the 
> IEC958 controls. The problem is I still got no output on the external
> S/PDIF module. 
> 
> I downloaded the specs from Analog Devices and found the register
> responsible for this, modified the AC97 codec drivers to add a
> control for the 3 flags specific to this chip (ie. outside of the ac97
> specification) concerning the digital interface and managed to turn
> it on. 
> 
> I would like to submit this modification so that others who may have
> a similar setup can use it. So my question is : what's next? Who can
> merge such patches to the CVS tree and what is the validation and/or
> testing procedure? Or do I just mail the code to 'perex' and he takes
> care of it?

just send the patch to alsa-devel ML.  (or you can send to Jaroslav or
me directly, too, if you don't show the patch publicly :)
we'll review the patch and soon commit to cvs if it's ok.


ciao,

Takashi


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf