From: Takashi Iwai <tiwai@suse.de>
To: "Yang, Libin" <libin.yang@intel.com>
Cc: "hui.wang@canonical.com" <hui.wang@canonical.com>,
"Lin, Mengdong" <mengdong.lin@intel.com>,
"alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
David Henningsson <david.henningsson@canonical.com>,
"Lu, Han" <han.lu@intel.com>
Subject: Re: [PATCH v2] ALSA: hda - Fix Skylake codec timeout
Date: Mon, 20 Jul 2015 09:34:13 +0200 [thread overview]
Message-ID: <s5hvbdfffka.wl-tiwai@suse.de> (raw)
In-Reply-To: <96A12704CE18D347B625EE2D4A099D19688898@SHSMSX103.ccr.corp.intel.com>
On Mon, 20 Jul 2015 09:14:15 +0200,
Yang, Libin wrote:
>
> Hi Takashi,
>
> > -----Original Message-----
> > From: Takashi Iwai [mailto:tiwai@suse.de]
> > Sent: Friday, July 17, 2015 9:02 PM
> > To: Yang, Libin
> > Cc: David Henningsson; hui.wang@canonical.com; alsa-devel@alsa-
> > project.org; Lin, Mengdong; Lu, Han
> > Subject: Re: [PATCH v2] ALSA: hda - Fix Skylake codec timeout
> >
> > On Fri, 17 Jul 2015 04:28:10 +0200,
> > Yang, Libin wrote:
> > >
> > >
> > > > -----Original Message-----
> > > > From: Takashi Iwai [mailto:tiwai@suse.de]
> > > > Sent: Thursday, July 16, 2015 11:54 PM
> > > > To: David Henningsson
> > > > Cc: Yang, Libin; hui.wang@canonical.com; alsa-devel@alsa-
> > project.org;
> > > > Lin, Mengdong; Lu, Han
> > > > Subject: Re: [PATCH v2] ALSA: hda - Fix Skylake codec timeout
> > > >
> > > > On Thu, 16 Jul 2015 17:37:41 +0200,
> > > > David Henningsson wrote:
> > > > >
> > > > >
> > > > >
> > > > > On 2015-07-16 17:34, Takashi Iwai wrote:
> > > > > > On Thu, 16 Jul 2015 17:31:33 +0200,
> > > > > > David Henningsson wrote:
> > > > > >>
> > > > > >>
> > > > > >>
> > > > > >> On 2015-07-16 17:14, Yang, Libin wrote:
> > > > > >>>> -----Original Message-----
> > > > > >>>> From: David Henningsson
> > > > [mailto:david.henningsson@canonical.com]
> > > > > >>>> Sent: Thursday, July 16, 2015 4:39 PM
> > > > > >>>> To: tiwai@suse.de; hui.wang@canonical.com; alsa-
> > devel@alsa-
> > > > > >>>> project.org; Yang, Libin; Lin, Mengdong
> > > > > >>>> Cc: David Henningsson
> > > > > >>>> Subject: [PATCH v2] ALSA: hda - Fix Skylake codec timeout
> > > > > >>>>
> > > > > >>>> When the controller is powered up but the HDMI codec is
> > > > powered
> > > > > >>>> down
> > > > > >>>> on Skylake, the power well is turned off. When the codec is
> > > > then
> > > > > >>>> powered up again, we need to poke the codec a little extra
> > to
> > > > make
> > > > > >>>> sure it wakes up. Otherwise we'll get sad "no response
> > from
> > > > codec"
> > > > > >>>> messages and broken audio.
> > > > > >>>
> > > > > >>> Thanks for finding this issue.
> > > > > >>>
> > > > > >>> Could you please give us you test case? We didn't meet such
> > > > issue
> > > > > >>> before. I would like do a full test on it.
> > > > > >>
> > > > > >> The test case is:
> > > > > >>
> > > > > >> - Install Ubuntu 15.04.
> > > > > >> - Upgrade to kernel 4.1.
> > > > > >> - Boot the new kernel.
> > > > > >>
> > > > > >> Note: I believe Hui tested with 4.1 and got this error. In my
> > case I
> > > > > >> have been running a hybrid kernel: Ubuntu 15.04, kernel
> > 3.19.0-
> > > > 23.24
> > > > > >> (which has a backported i915 driver), and then the alsa-daily
> > > > DKMS on
> > > > > >> top of that.
> > > > > >>
> > > > > >> I can email you off-list with details about the machine I tested
> > it
> > > > on,
> > > > > >> if you like.
> > > > > >
> > > > > > Did you hotplug the device or is it booted while plugged?
> > > > > > I had an unstable communication at hotplug / unplug on SKL at
> > the
> > > > last
> > > > > > time, too. But the boot with the DP plugged worked well even
> > on
> > > > an
> > > > > > old SKL box.
> > > > >
> > > > > For this bug, there was no HDMI monitor connected at all, but I
> > > > believe
> > > > > it does not matter. On power up, the power well is enabled and
> > then
> > > > > disabled. When the power well is enabled again without this
> > extra
> > > > wakeup
> > > > > poke (probably due to PulseAudio probing), this error happens.
> > > >
> > > > Ah, that's interesting. So this happens when no monitor is
> > > > connected. I haven't seen this, though; maybe depends on the
> > board
> > > > or
> > > > BIOS.
> > >
> > > On SKL, each time turning on power well 2, display codec need
> > > extra wakeup poke.
> > >
> > > If there is monitor connected, power well will not be turned
> > > off even audio driver asks to.
> > >
> > > If there is monitor connected, power well will be really
> > > turned off. In this case, when hdmi audio is used, we
> > > must do the wakeup poke.
> >
> > So the patch does the right thing? I'm currently waiting for an ack
> > from you Intel people as this is highly specific to the chipset
> > detail. Please give reviewed-by, acked-by or whatever if the patch is
> > OK.
>
> The patch is right. I have reviewed the patch and Our QA has verified it.
OK, I queued the patch now. Thanks.
Takashi
next prev parent reply other threads:[~2015-07-20 7:34 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-16 8:39 [PATCH v2] ALSA: hda - Fix Skylake codec timeout David Henningsson
2015-07-16 15:14 ` Yang, Libin
2015-07-16 15:31 ` David Henningsson
2015-07-16 15:34 ` Takashi Iwai
2015-07-16 15:37 ` David Henningsson
2015-07-16 15:53 ` Takashi Iwai
2015-07-17 2:28 ` Yang, Libin
2015-07-17 13:01 ` Takashi Iwai
2015-07-20 7:14 ` Yang, Libin
2015-07-20 7:34 ` Takashi Iwai [this message]
2015-07-17 0:57 ` Hui Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hvbdfffka.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=david.henningsson@canonical.com \
--cc=han.lu@intel.com \
--cc=hui.wang@canonical.com \
--cc=libin.yang@intel.com \
--cc=mengdong.lin@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.